Hey guys... just released a new chome weather version that should work with the VOX also. Can somebody give it a shot ?
I can't seem to get it to install,
Installation was unsuccessful. The program or setting cannot be installed because it does not have sufficient system permissions.
I'm using version 3 of Zeeshee ROM.
Cheers,
Same for me! Same rom. Btw, both weather progs delete my clock icon and blackscreen is not possible to load. (mini with dr.gonzo 6.1 rom)
Everything works!
Extract from cab all files for Windows directory and place them into the device.
Delete this files from cab and save cab.
Modify cab working.
Works brilliant .. Thanks a lot keep it up ... i like the background on the pictures what you post there . it will be great if you send it as well . cheers
I'm being stupid here.
I still can't get it to work.
Can someone upload the modified cab please.
Thank you.
Unzip attached file.
Copy files from 'Windows' (archive) to 'Windows' (device).
Copy cab to device and run it.
Reboot.
Enjoy!
Excellent!
Thank you for posting.
Regards,
Anyone have a screen shot of what it looks like?
TabletGuru said:
Unzip attached file.
Copy files from 'Windows' (archive) to 'Windows' (device).
Copy cab to device and run it.
Reboot.
Enjoy!
Click to expand...
Click to collapse
Thank you it works perfect now.
Got it to work, sort of, so please help.
weather.yahoo.com gives me NLXX001 as code
Doesn't seem to do anything
(And so is c>f not working)
Are we still using weather.yahoo.com as source?
I had already installed the original MiniWeather on my on my vox (Orange E650) and all was OK except that in portrait mode the weather image didn't show on the clock tab whereas it did in portrait mode. So I decided to install the vox version to see if it would be fixed.
Unfortunately I've found that the files can't be copied over to the device's Windows folder because Resco says they already there as read-only files in ROM and therefore cannot be overwritten. So after installing the 1.0b CAB I get the following error when I initially select options:
Unknown command: "nu=timestamp"
Line 13(\program files\nrg\chomeminiweather\SetOptions.mscr):nu=TimeStamp()
Is there anything that can be done? Would the clock/weather Image have been fixed anyway? If not I'll revert to the previous version
Thanks and nice program !!!
can someoene post a home screen to show how this should look. Its messed up on mine i believe I get 2 panels - the first one works but the image is messed up. The second one says "forecast" but in there it just says "push centre button to update, push right softkey marked options to set your options"
I had trouble copying the two chome files to the windows directory - it said I didnt have permission to copy them.
can anyone assist ?
Frottage........ It sounds like you've had a similar problem to mine above.
If you can't copy the files over the install doesn't work properly.
I've reverted to the non-Vox version and all now seems OK on my Orange E650 with Dr.Gonzo's 5.2.19195 Rom
Try using the Resco Explorer trial to copy them across. It's because the files it's trying to replace are in ROM. Resco worked on my Dr. Gonzo E650.
Related
** EDIT **
Aplogies for not crediting ncruz as the one who edited the original files and got this working in the first place!
As per his instructions, and to make everything a bit easier for everyone, I have updated the Himalaya cab file with his updated files
** EDIT **
Thanks to TofClock for the making the cab file! I've just taken his instructions and made them a little easier to follow, I hope he doesnt mind
The Arcsoft mms composer has been extracted from the Universal rom and a cab file was cerated to work with WM 5.0 Blueangel devices.
However this cab won't install on Himalaya devices.
This is because of the following two files
ArcMMS.dll cause the install stop wis message : bla bla bla not digitally signed bla bla bla
RcDll.dll cause the install stop and prompt to install in another place , and again , and again .
TofClock has created his own cab file (which I have now updated to ncruz newest versions) with all other files and reg settings ...
Attached to this post is are two RAR files containing a cab file and 2 dll files.
To install, follow these instructions :
1. Download Himalaya_WM5_MMS.part1.rar and Himalaya_WM5_MMS.part2.rar from this post.
2. Decompress the rar file on your PC using winrar or something similar
3. Soft reset your Himlaya
4. Copy RcDll.dll and ArcMMS.dll to your Windows directory on your Himalaya
5. Copy the cab file to your Himalaya and install it.
6. Soft-reset your device again
7. After this , go the messaging application. click on Inbox you should see a new account there called MMS.
If not click on Menu>Tools>New Account
Create a dummy email account (it doesn't matter what info you fill in, just make it up) but at the Account information select MMS as the account type and click next.
Then finish going through the account creation, again for the server information making anything up.
8. Once that is completed clock on Menu>MMS Configuration then click the servers tab.
9. From here fill in your operators server settings (remember to set it as default!) and enjoy MMS on WM5.0!!
Again thanks sooo much for everyone's hard work in getting this working, especially ncruz for the initial work and the BA cab and TofClock for making the Himalaya cab file.
Great, just another thing, thoose files aren't from universal.
First, thoose files are from MY POST, i've reshacked thoose files for qvga devices, so it really pisses me off when people take credits for things they don't to.
Second, at least use my latest rcdll.dll see my post at BA forum.
The one that's in THAT cab has some huge icons. and i have hacked it a little bit more.
Third, i've already resolved the problem of having to create the account by hand.
So, if you really want to do the thing right, get the cab at my post, open wincecab editor, remove rcdll.dll and arcmms.dll, install the cab, then copy the files you've just removed and copy them to \windows.
PS: you can check the original files from universal and see that they aren't the same.
everythin is done as explained before, and no mms account appears
please help me
THankssss
Working with WM2k5_1.60c.00WWE_XDA2_HIMALAYA
thanks mjames_84 for update the cab
GREAT THANKS to ncruz for your good job , without it , i never should made this cab
paketecuento -
Have you tried this previously using ncruz manual installation?
I had trouble with that method and once I tried it even after I used the cab file it wouldn't work I had to hard reset my device and do it again.
If you did try the manual install first then you may have to do the same, it certainly worked for me anyway.
As his cab file worked great once I had removed the two dll files and had done a hard reset.
Of course if you havn't tried the manual installation previously then it could be anything you might need to give more info on what ROM version you're using, software you have installed etc...
working 100%, once updated to 1.60c....
It's strange. On my device every time I try to install the cab file I get an error message while installing. I follow the instuctions as described...
Has anybody dealt with it?
Same problem here
Get a error when I start installing. Says that I should try a different location. I"ve tried my SD and PPC. Nothing works.
Download here
It's worked with my WM5V.1.60c!!!
But i use .dll files from mjames_84 and use .cab file from TofClock. I can send and recieve my MMS!!!
Thank you
I too tried mjames files and had problems.
However I also left mjames .dll files there deleted his cab file and used TofClocks' cab file and I now have working MMS.
Thanks all!
the dll in archive with my cab are same of mjames dll and ncruz dll , i've updated the rar
Hello, thank you for the great work!
But i have a problem, no way to getting it to send messages through Vodafone italy, i had already a Vodafone MMS connection setted up by my QTEK SD Configuration wizard (dloaded from dangaard site) which worked with WM 2003 but i have no way of getting it to work in WM 2005, i keep getting the error message that my mms has not been sent. Anyone can help me please?
Thank you very much
By the way, since i almost haven't any programming skill i have Eng/Ita translation skill ^_^, so if u are interested in translating the WM2005 ROM to ITA let me know, i can help ^_^
Hi overhere,
I did precies what you said at the top,
But when I want to start MMS I get an error about a bad cerificate or something like that... please help...
Klazimodo
It works !
Upgraded to wm 5.0 two days ago.
Installed as per instructions and my MMS's work like a charme.
Thanks guys 8)
Hi guys
I installed it, no problem with installation. Send mms, GPRS Monitor shows that the mms is sending but then I get a error that says unable to send.
What can the problem be?
Use WM5 1.60c and Radio 1.08
Thanks guys
dudes, Himalaya is ****ing full of those WMstuff, so will you people try to do something for ALPINE ?
Or XDA O2IIi ?
hi there
i am not able to install
i have xda2 win2005 1.60c
i downloaded both the rar files unrared these in two dif folders one is called part 1 and the other part2
then i softreset my xda
then i coppied dll files from part1 folder
then i try to install the cab file coopied from my pc to xda
i try to install on system
but message comes up says that MMS.... can not be install
am i doing something wrong here
and y there are two rar files containig the same files
PLZ help
Regards
its working now
thanx
regards
gugi
the last post tells you the detail
THANX
buzz
Thanks for reply.
Hope for good news
Can't replace wince.nls
I have a Win Mobile Phone Edition 5, very first one in U.S.
I tried to load chinese so that I can read chinese. I copy over font file and am able to see Chinese in Word, providing that I select options.
However I got issues with IE, because I there is no option for me to change the encoding.
I learned that I need to change wince.nls file. And I downloaded your file. Now I got an issue "Access Denied" message when I try to override original wince.nls. Looks like it was in ROM.
Any idea?
Thanks
you should use another file explorer other than the system's one, and then you can overwrite it
the tool is in the attachment(it's in chinese language), it's a green software
The attribute is grayed out.
Thanks for your prompt response and the program.
maybe i did not use it right, some how the menu of the program is mess up. see the attached.
I have Resco Explorer 2005, which also show wince.nls is in rom. Every time I change the other attributes, it changes back when I re-open property page.
While I have a pocket PC 2003 Dell x3. The wince.nls is not rom file.
Can I override rom file?
It is about mid night here in U.S. I will check back first thing in the morning, just in case you do not get response from me right away.
Again, thanks for your help.
on wm2003 it was possible to "override" files in ROM.
Now it is not.
You have to wait until we'll be able to decompress the ROM and inject your wince.nls into ROM.
buzz
ok, i've downloaded your chinese.rar to test-it ...
i've replaced the wince.nls with this procedure
in \windows\ , i've renamed wince.nls to wince5.nls
got an error message "Can't delete wince.nls" , but it's renamed
Copy the new wince.nls to \windows\
Copy fonts to \windows\fonts\
import reg file ... modified
soft-reset
...
Anything appears ...
i'm not able to choose chinese in regional settings
In the registry , after soft-resest , nls automaticly set to "0409"
if i set to 0804 and soft-reset , poof .... 0409
I think there is another problem
OK, I will wait.
One another thing I noticed: through ActiveSync, I can create a folder in windows, (well, as you expect). But I can't copy the wince.nls file to even the newly created folder, not just windows folder. On my PC, the message saying... no space or no permission, etc. I do have like 3-4mb left in main storage and install other program.
Just for your infomation.
it is easily possible to copy wince.nls to your \Windows folder. Just create a cab for it.
But it is not taken into system... That;s the problem here...
Will look at it further...
buzz
I'm success to copy it in my himalaya. I had tried several method, one of them is o.k. but not sure is this one or not.
1) copy the wince.nls to somewhere in your SD Card.
2) Boot your Himalaya into Safe Mode.
3) Then copy the wince.nls to your Himalaya's \windows\
4) Soft Reset.
Do you mean that you can choose the Chinese region now?
Re: The attribute is grayed out.
zoneu said:
Thanks for your prompt response and the program.
maybe i did not use it right, some how the menu of the program is mess up. see the attached.
I have Resco Explorer 2005, which also show wince.nls is in rom. Every time I change the other attributes, it changes back when I re-open property page.
While I have a pocket PC 2003 Dell x3. The wince.nls is not rom file.
Can I override rom file?
It is about mid night here in U.S. I will check back first thing in the morning, just in case you do not get response from me right away.
Again, thanks for your help.
Click to expand...
Click to collapse
see the menu in the attached
buzz_lightyear said:
on wm2003 it was possible to "override" files in ROM.
Now it is not.
You have to wait until we'll be able to decompress the ROM and inject your wince.nls into ROM.
buzz
Click to expand...
Click to collapse
Waiting for your good news ...
only 1.60b could be chineselization
I had tried to replace wince.nls in WM2K5_160C_WWE in various ways mentioned in xda-dev forum. none of them could be finished this job.
so i had to refresh my rom to 1.60b, everything is OK now. I can override the wince.nls, import *.reg, set regional to PRChina and so on.
expecting a perfect WM2K5_160C supproting Simple Chinese.
mazinka said:
I'm success to copy it in my himalaya. I had tried several method, one of them is o.k. but not sure is this one or not.
1) copy the wince.nls to somewhere in your SD Card.
2) Boot your Himalaya into Safe Mode.
3) Then copy the wince.nls to your Himalaya's \windows\
4) Soft Reset.
Click to expand...
Click to collapse
How do u manage to boot ur Himalaya into Safe Mode? Pardon me of becoming a dumbo.
WM5 CHS version SD image
Hi buzz:
I have got a SD image from a Himalaya which rom is CHS version, it's backup from a friend of mine. He got it from the seviece center. but when i use this image to flash my himalya, i replaced the SD head, write it to my SD card and flash...finished, hard reset, and I got an error like this:
"Device authentication failure. Please contact the product manufacture. For reference, please provide your device ID.
xxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxx"
Then I found a way to convert the SD image to a .nbf file for the xda-developers site. converted and flashed using the PC through cable, but the same "Device authentication failure..." error occucred again.
And then, I asked my friend flash the SD image to his device which the image came from. succeeded
!
Any way to make the rom work for my device? help pls...
ljm2020
2005/11/16
Re: WM5 CHS version SD image
ljm2020 said:
Hi buzz:
I have got a SD image from a Himalaya which rom is CHS version, it's backup from a friend of mine. He got it from the seviece center. but when i use this image to flash my himalya, i replaced the SD head, write it to my SD card and flash...finished, hard reset, and I got an error like this:
"Device authentication failure. Please contact the product manufacture. For reference, please provide your device ID.
5083252100381951 38000050bf3f5173"
Then I found a way to convert the SD image to a .nbf file for the xda-developers site. converted and flashed using the PC through cable, but the same "Device authentication failure..." error occucred again.
And then, I asked my friend flash the SD image to his device which the image came from. succeeded
!
Any way to make the rom work for my device? help pls...
ljm2020
2005/11/16
Click to expand...
Click to collapse
hi ljm,
i already answered to you on buzzdev.net )
buzz
Greetings,
I want this version of faria to put in any rom of my like,
I want help, to get it integrated in the rom or in any other to get it.
I have tried to put the all the file of this application taken out from molski 3.3 to muns rom by deleting the original camera file and replacing it with farias camera application, but i failed, after i cooked the rom i was surprised to see the old htc camera application although i put the file.
Can anybody tell me (or Faria), which file i require to put, to get the faria's camera application.
thanks
I have the same version and build number, except mine does not say faria. What is different between the two?
well, I googled and found faria's camera app and loaded it to my phone. so far so good. liking the extra templates.
Edit** Night mode puts out some great results!
tROZAN PLEASE GIVE ME THE LINK
do a google for faria3.3camera.rar and make sure you show omitted results.
Hey trozan im searching from quite a long time please can give me the application i cannot find did the show ommited results.
samy.3660 said:
Hey trozan im searching from quite a long time please can give me the application i cannot find did the show ommited results.
Click to expand...
Click to collapse
i found it
ftp://xda:[email protected]/Uploads/WIZARD/Applications/faria3.3camera.rar
and
http//tonblom.com/ftp/faria3.3camera.zip
links not working
i tried those 2 links and neither 1 worked
http://4pda.ru/forum/index.php?skinid=1&showtopic=29629&st=90
Found out
Thanks to trozan.
Direct link
Moderators If thats not supposed to be here, than do tell me i will take it out.
Thanks
how to?
how do u import the camera reg key
i didn't see a camera reg key and therefore did not import it. I just rebooted after copying all the files and it's working fine on my phone
Greetings,
How did you copy it just doesnt copy in windows folder.
Thanks
copy reg key using total commander and task manager
samy.3660 said:
copy reg key using total commander and task manager
Click to expand...
Click to collapse
What am I missing? I didn't see or find a reg key in the .rar file.
hey tell me how you copy the file as i cannot???
And to see reg file you must set view hidden file in the folder option.
I first put the files that are to be copied to the windows folder in a folder on my storage card (any folder). I then opened total commander and selected all the documents in that folder and did a copy to the windows folder. done. Restarted the phone (using the power button) and when it came back up, Faria camera, at your service.
Did you find the difference in camera.?
Apply this fixes it will become more better
"Gamma_User"=dword:00000000
"Brightness_User"=dword:00000064
"Contrast_User"=dword:00000004
"Gamma"=dword:00000000
"Brightness"=dword:00000064
"Contrast"=dword:00000004
tommorow i will give more.
Hello.
I'v trying this for a couple of hours without effects.
Dumped rom, builded modules with PKGTool. Files are in OEM/Oemdrivers and SYS/Chome. It does't run by just copying. Need some way to regsvr dll files. Because Chome plugin is accesing partial plugins by GUID.
Anyone have idea?
I did the exact same thing. I haven't had any time to try anything else because I have finals next week. I'll let you know if I get anything
To all helpfull shadow users
Can some T-Mobile Shadow user backup those registry keys?
all those are in HKEY_CLASSES_ROOT\CLSID\
Code:
{D7B35490-A4B2-4ef4-BF8D-332C4979F14E}
{892B90CB-9806-427e-8BED-F45C6A9E576B}
{E98FBDCC-6664-4c5b-BB62-20932ED37762}
{C5A51777-B837-447d-8947-FAF3FF9D570B}
{3FD3C828-753F-48f9-BEA9-6201F64B5F58}
{06BC7E69-CE13-4028-9454-C27A32F56197}
{4F612B1A-E470-4b31-9386-AC396AEDAAF9}
{1DE8DD6B-D74D-4d2e-A8C3-72439F2B8402}
{D3303B00-DB12-4bbb-A0CD-D5DAD41E2DFC}
{634CA962-22D8-4671-BBC7-BAC47148A4B6}
{D51A48AA-1F22-4aee-A4D1-B215C504550D}
{74D7FEB8-0DA7-485a-AB4F-4D12E6338758}
{4B998C14-3801-4a8e-9B20-5DFE58B19C39}
{7B4E69B9-C032-4134-81BE-D6F360B30576}
or better just backup HKEY_CLASSES_ROOT\CLSID\ and send me PM - I'll sent my mail.
You can use Registry Workshop to do this.
Those keys don't contains any personal information or settings so it's safe- don't worry.
//////////////////////////Edit////////////////////////////////
I've recieved all CLSID from [email protected]://allshadow.com forums but still no luck...
I'll be getting my own Shadow in a couple of days. I can do the backup then. Once again, I don't have much time to do anything else because of school and a robotics team I'm on.
Nice job finding those keys!
When I tried flashing my first rom with all of the CHome plugin stuff in it, the ROM flash to the wizard stopped at 78%...
I uploaded all the plugins and .png + reg entries that seems to be used with the chome home screen. all files are here:
http://www.esnips.com/doc/14b31b95-2c8f-4ae9-a6c9-1453df7d05e6/shadow
copy all the files in Windows to Windows folder. Add all the registry entries and copy T-mobile_basic_blue to Application Data\home\ folder.
Once I've tried to put all the files to my phone, I even got all the regedits (or maybe I've missed something) and I just got a white space on my homescreen.
how do i add the registry's to my phone?? do i add them with a reg edit app??
kingroach said:
I uploaded all the plugins and .png + reg entries that seems to be used with the chome home screen. all files are here:
http://www.esnips.com/doc/14b31b95-2c8f-4ae9-a6c9-1453df7d05e6/shadow
copy all the files in Windows to Windows folder. Add all the registry entries and copy T-mobile_basic_blue to Application Data\home\ folder.
Click to expand...
Click to collapse
could you post this on the ftp site? for some reason, the captcha phrase on esnips is having problems and i can't create an account. Thanks!
rafyvitto said:
how do i add the registry's to my phone?? do i add them with a reg edit app??
Click to expand...
Click to collapse
You cannot normally import .reg files on smartphones. However Resco Explorer from resco.net can do that.
kingroach said:
I uploaded all the plugins and .png + reg entries that seems to be used with the chome home screen. all files are here:
http://www.esnips.com/doc/14b31b95-2c8f-4ae9-a6c9-1453df7d05e6/shadow
copy all the files in Windows to Windows folder. Add all the registry entries and copy T-mobile_basic_blue to Application Data\home\ folder.
Click to expand...
Click to collapse
Have You manage to run this plugin on non shadow device?
Files are easy to extract but make it work does not.
I tried on qtek 8500. It doesn't run and after reset the device stucks. Need a hard reset to factory defaults to work again. fortunately I had a backup.
I just got my own T-Mobile Shadow and I found out that you need to have a .scheme/.home XML file that sets the plugin. I think it's called cmhome.home. Also, you need cmhomeres.dll.0409. I'm going to try adding these in to the rom...
...unless they are already there and I haven't noticed
any update.. can i have a copy of the rom u builded thx
ND4SPD said:
I just got my own T-Mobile Shadow and I found out that you need to have a .scheme/.home XML file that sets the plugin. I think it's called cmhome.home. Also, you need cmhomeres.dll.0409. I'm going to try adding these in to the rom...
...unless they are already there and I haven't noticed
Click to expand...
Click to collapse
Yes we actually know that chome is part of theme, about that MUI and other many many files too.
Can You just post orginal Shadow rom.
melgurth said:
Yes we actually know that chome is part of theme, about that MUI and other many many files too.
Can You just post orginal Shadow rom.
Click to expand...
Click to collapse
i got it u need it?
here u go http://rs81.rapidshare.com/files/73516772/S730_ROM_Dump__PKGTool_.rar
Can somebody upload new Shadow update to rapidshare?
I'll post it as soon as I get home. School's proxy blocks FTP upload/download and exe files.
Rom link: http://www.megaupload.com/?d=5GART6H6. Sorry I forgot to upload before
Thanks for posting the new ROM!
I had some success with the old one here:
http://s2.photobucket.com/albums/y15/GnatGoSplat/3125Shadow/
It was a complete ROM port though. I'll see about making a CAB when I have some free time.
cant wait wanted it since shadow came out...i have s620 will it work with landscape
Hello,
After having installed MBarvian Touchflo 3d Skin, I only see "Click here to srart TouchFlo" when I touch my screen I see "Starting TouchFlo", than again "Click here to srart TouchFlo".
Does anyone have a solution to this ?
Thanks
Note : I own a Kaiser with the french original HTC ROM 6.1
Topic Moved to Q&A Forum
Moved to Q&A
i have same problem
well, i also ever got the same problem
Sometimes, HTCHomeSetting.xml is not made to be put on windows folder but on Manilla gfx folder. And that used to be my problem
try to reinstal manilla2D, and use M2DC to backup and restore your default skin, i hope it's work
Your HTCHomeSetting.xml file is messed up.
Here is the stock XML file. Turn off M2D (untick TouchFLO in your today settings), drop this xml file in your windows folder and try reloading M2d.
I always keep the stock XML for instances like this. Even sometimes the restore doesn't fix itm2d issues.
Need Help setting up theme
I have tryed and tryed to figure out how to apply the theme ive downloaded and no luck. after downloading the theme it try to place the file into the windows folder on my phone and it will not go. I keep getting a error message that says the stuff is running, or can not copy it cuz its protected. or there isn;t enuff memory, witch i know thats not the case. I made sure that the touch flow is off in my today screen before i did it. i am kinda a noob at least when it come to the themes. so anything from someone would be nice. Manilla 2D is the theme and icons the whole bit that i want to get working. Please someone help b 4 i go insain. or point me in the right direction so i can find sum answers. Thanks
What kinda device are you installing this on?
How are you using to transfer the files? Activesync? WMDC? Total Commander?
Are you manually applying the theme or using M2D Customizer?
Corpsegrinder said:
What kinda device are you installing this on?
How are you using to transfer the files? Activesync? WMDC? Total Commander?
Are you manually applying the theme or using M2D Customizer?
Click to expand...
Click to collapse
its a tmobile wing/ htc herald I put the files on my sd card throu activesync and then tryed to copy them to the windows folder on my phone memory. Not sure on how to do this at all I have figured out alot of other stuff just not the theme stuff
You shouldn't have to drop the XML on your SD card. Just browse for the windows folder on your device and drop it in there right away. If it doesn't let you drop it in the Win folder, then I would drop it on my SD card and use software called ''Total Commander''. TM is pretty much a file explorer but will let you change system files that would normally error.
Being I dont know all your circumstances, this is what I would do and how I have it setup on my phone. Works flawless as well. I can change themes in seconds.
If that XML file didn't cure your problems then I'm assuming you have issues elsewhere as well.
First I would remove M2D and reinstall it. Once you have that working again, download and install Manilla 2D Customizer...
http://forum.xda-developers.com/showthread.php?t=427392
Create a new folder on your storage card and name it ''M2d Themes''. M2D customizer works with a file extension of ''.mtdct'' Some skinners will create there theme's file with this extension for you. It is nothing more then a zip file with the extension renamed.
If the theme's files your trying to install is compressed into zip format, just rename the file from ''.zip'' to ''.m2dct''. Drop the file into your new ''M2D Themes'' folder on your storage card, open up M2D Customizer and browse for the themes ''m2dct'' file you wish to install. Click ''Apply Theme'' and it does all the work for you.
I must have 30 themes in my M2D Themes folder and as I feel the need for a change, I'll load M2D Customizer and switch themes. It's a piece of cake!
Hope this helps.
My icons don't update correctly when I apply a new theme using M2DC...Someone mentioned that there are v1 and v2 themes but I can't for goodness sake distinguish between them. Apparently some hacked versions of M2D will only correctly use v2 themes...Any ideas/suggestions? I have searched all over but can't seem to find a solution other than overwriting the HTCHome...xml file...