Related
I have Windows Live Mobile installed so after a soft reset, the program automatically attempts to make a data connection. However, the data connection tab in the comm manager is set to off by default, so a connection can't be established.
Is there any way on the AT&T Fuze to set the data connection on by default?
Thanks....and yes I searched "data connection default" but didn't see anything related to this problem.
Advanced_Configuration_Tool_v3.3 or Diamond Tweak 0.5.3 have an option to have data always ON. However, this will kill your battery in no time
thanks for your help. i have those programs, but i'll look them over again.
EDIT: i looked at both and don't see an option to always have a data connection enabled. under data, you can obviously enable various connections and i already have those set. but i don't see the option to always have the connection on.
DiamondTweak > 6 Data > 6.2 Always On: MEdia Net
MrSlacker said:
DiamondTweak > 6 Data > 6.2 Always On: MEdia Net
Click to expand...
Click to collapse
thanks. i'm an idiot. i didn't have diamond tweak. i had diamond tf3d config....duh.
diar said:
I have Windows Live Mobile installed so after a soft reset, the program automatically attempts to make a data connection. However, the data connection tab in the comm manager is set to off by default, so a connection can't be established.
Is there any way on the AT&T Fuze to set the data connection on by default?
Thanks....and yes I searched "data connection default" but didn't see anything related to this problem.
Click to expand...
Click to collapse
Funny how I'm trying to do the opposite. For some reason my data turns on by itself. I turn it off and a few minutes later it turns itself on again. It's really a battery drainer.
If anybody knows how to change it so it will default to off, please post. Thanx.
RallyPunx said:
Funny how I'm trying to do the opposite. For some reason my data turns on by itself. I turn it off and a few minutes later it turns itself on again. It's really a battery drainer.
If anybody knows how to change it so it will default to off, please post. Thanx.
Click to expand...
Click to collapse
Certain apps/functions will need data access depending on their polling settings. Email and weather, for example. I disabled the auto updates for those and am hoping to see the data connection stay OFF when I set it.
Hope this does the trick.
I had to configure a bogus network so the device wouldn't get anywhere even if it tried... because it would seemingly reactivate at will.
I dont have a data package for my fuze so i want to disable it from connecting when i load an app that uses internet. I wish to have wifi as my default connection.
Is there a simple way to do this?
Search for the nodata app. It will allow you to disable all data connections other than wifi. I am in the same situation as you and it works out fine for me so far.
http://www.modaco.com/index.php?act=attach&type=post&id=24287
or you could just go to your connection settings and under advanced select My work network in both drop down boxes...
um you could just go to the connection settings and delete the dial up profile
Or you could just go to Comm Manager and turn off Data Connection.
go to settings, then Communications and turn off your data connection.
yeah but he doesnt have a data connection that wouldnt stop it from dialing up would it?
If there's no wifi - it will automagically turn the data connection back on (when it needs one - weather/email/etc.). Why there's even a switch.... i dunno.
Well i did disable so it didnt even come up so i dont get charged even the smallest amount. However youtube doesnt work with wifi, everything else does.
xboxhaxorz said:
Well i did disable so it didnt even come up so i dont get charged even the smallest amount. However youtube doesnt work with wifi, everything else does.
Click to expand...
Click to collapse
I have disabled data connection and Youtube works great for me over wifi, so don't worry, it's not a software limitation.
I cant figure it out then, it doesnt seem to work over wifi. Perhaps your just a lucky fuze user.
Edit:WOW JUST POSTED THIS, Tried it and now its working lol
You can always ask your service provider to put a data block on your account, just to be on the safe side
euphoria47 said:
You can always ask your service provider to put a data block on your account, just to be on the safe side
Click to expand...
Click to collapse
Oh thanks, will do that in the future
just go to the network settings and create a fake / none network and set that as the default.
thats what i did worked perfectly
hope this helps
call at&T to have them put the internet block code on that phone number
thillypickle said:
just go to the network settings and create a fake / none network and set that as the default.
thats what i did worked perfectly
hope this helps
Click to expand...
Click to collapse
This might sound noobish, but do you have a step by step?? Is it on Settings>Connections>Advanced>Select Netwoks>....?? Thanks in advance.
Search and dowload NOGPRS cab. It should be a zipfile with a cab in it. Run the cab on yout phone. You should now have an icon that says Nodata. This allows you to toggle the connection so it can come on freely when needed by an app, or not come on at all even if an app needs it. Pretty self explanatory. No need to create fake accounts, or delete anything. If you delete stuff, then when you need to use it if ever, you have to re-enter everything. This eliminates that.
(sorry I posted it in the wrong place so now re-posting it here)
Hi -
I just got this white Skyrocket phone with 200MB data plan.
I heard that when connected to 4G, the phone uses data allowance from the data package, whereas if connected to WIFI (like at home), the data usage doesn't come off my AT&T data allowance.
So I want to disconnect from 4G and connect to my WIFI when I am at home.
At the store, the just told me to make sure that WIFI is showing as on on the top bar (or when you swipe that bar down). They said if WIFI is showing on, it means that the phone is using WIFI connection.
However, I see that at the same time when WIFI is showing on, the "4G" icon is also showing on and looking active! So- they are both looking active! That's why I wonder which connection is my Skyrocket actually using?
It looks like the data I use on WIFI also comes out of my data plan because the data packet is on.
So I had an idea, went to settings-wireless-mobile networks and unchecked "Use Data Packet".
When the above was unchecked, 4G icon disappeared and I could see only WIFI icon on the top bar, which would be good - however, the problem is that now I cannot connect to internet. (I turned the phone on and off- no change)
Does it mean that there is no way on Skyrocket to bypass AT&T data allowance and whether I use 4G or my own WIFI, there is no free internet access on this phone?
Or is there something else I can do to make sure I am connected just to my WIFI and data is free?
I would appreciate your help.
Thank you
It just shows both icon to double check get speedtest and do one. You can see in results if you get wifi or 4g LTE.
justcalled said:
(sorry I posted it in the wrong place so now re-posting it here)
Hi -
I just got this white Skyrocket phone with 200MB data plan.
I heard that when connected to 4G, the phone uses data allowance from the data package, whereas if connected to WIFI (like at home), the data usage doesn't come off my AT&T data allowance.
So I want to disconnect from 4G and connect to my WIFI when I am at home.
At the store, the just told me to make sure that WIFI is showing as on on the top bar (or when you swipe that bar down). They said if WIFI is showing on, it means that the phone is using WIFI connection.
However, I see that at the same time when WIFI is showing on, the "4G" icon is also showing on and looking active! So- they are both looking active! That's why I wonder which connection is my Skyrocket actually using?
It looks like the data I use on WIFI also comes out of my data plan because the data packet is on.
So I had an idea, went to settings-wireless-mobile networks and unchecked "Use Data Packet".
When the above was unchecked, 4G icon disappeared and I could see only WIFI icon on the top bar, which would be good - however, the problem is that now I cannot connect to internet. (I turned the phone on and off- no change)
Does it mean that there is no way on Skyrocket to bypass AT&T data allowance and whether I use 4G or my own WIFI, there is no free internet access on this phone?
Or is there something else I can do to make sure I am connected just to my WIFI and data is free?
I would appreciate your help.
Thank you
Click to expand...
Click to collapse
They both should not show up at once unless something that needs access to att data like voicemail is checking for messages. Sounds more like either you are not connecting to your wireless router correctly or the wifi antenna is messed up on your phone.
Well sometimes for me it shows both icons in status bar. All i do is turn off wifi and turn back and the 4G LTE icon disappears.
draztikrhymez said:
They both should not show up at once unless something that needs access to att data like voicemail is checking for messages. Sounds more like either you are not connecting to your wireless router correctly or the wifi antenna is messed up on your phone.
Click to expand...
Click to collapse
appdroid said:
Well sometimes for me it shows both icons in status bar. All i do is turn off wifi and turn back and the 4G LTE icon disappears.
Click to expand...
Click to collapse
Yea same for me but that means something is not allowing the phone to connect to wifi hence having to turn the wifi radio off n on.
Normally it shouldn't do that. Plus if op restarted the phone entirely and still no connection something is just not establishing the connection correctly
Well not exactly because i did speed test and i got my connection as wireless connection so for me it was fine with both icon.
draztikrhymez said:
Yea same for me but that means something is not allowing the phone to connect to wifi hence having to turn the wifi radio off n on.
Normally it shouldn't do that. Plus if op restarted the phone entirely and still no connection something is just not establishing the connection correctly
Click to expand...
Click to collapse
Some functions require the data connection (mms, some syncing etc) and will trigger your data connection even when on wifi
If truly concerned use tasker or juice defender to disable cell data while wifi is on. Or manually turn it off
Or as someone else mentioned...you wifi is not maintaining connection
Sent from my SAMSUNG-SGH-I727 using XDA App
Not sure if this will help but there are many apps in the market to help with connection issues. I have two widgets that tells me which one im using and how strong they are just do a search for mobile traffic or cell /wifi. Hope that helps.
Sent from my SAMSUNG-SGH-I727 using xda premium
I think a lot of people are ignoring the op said no data is working at all when trying wifi.
Yes both icons will show sometimes because like mentioned mms, voicemail, etc requires it.
If the phone has no data period even after reboots then wifi is not connecting
Download "My data manager" from the market. It will show you your data useage, both wifi and data. Use that and check to see if you really are using your wifi or if its still using data.
Sent from my SAMSUNG-SGH-I727 using XDA App
Thank you for all your replies, each one taught me something about this new phone and I downloaded a few of the apps that you mentioned.
So all day I was being very careful about the internet, tracking my 4G/WiFi usage all day and then in the evening my kid pressed on a game icon and some kind of car game downloaded =adding over 70MB to my data transfer right away!! (and my monthly budget is 200MB)
It took a couple of seconds - he actually just pressed on the icon and then pressed home when he saw a car because he decided he doesn't want to play it. But it downloaded anyway! I am so mad!
I think it is unethical and very sneaky of AT&T to place all those unnecessary apps on the phone - especially if they turn out to be so costly.
So the only way to delete all those stupid apps is to root the phone? I am not a programmer and I am so afraid that I am going to mess it up
Don't need to root in order to uninstall apps just go to setting>application>manage application>Downloaded apps> and uninstall them. This is all the bloatware that you don't need so go through carefully and uninstall what you don't need. It will help you increase battery life.
justcalled said:
Thank you for all your replies, each one taught me something about this new phone and I downloaded a few of the apps that you mentioned.
So all day I was being very careful about the internet, tracking my 4G/WiFi usage all day and then in the evening my kid pressed on a game icon and some kind of car game downloaded =adding over 70MB to my data transfer right away!! (and my monthly budget is 200MB)
It took a couple of seconds - he actually just pressed on the icon and then pressed home when he saw a car because he decided he doesn't want to play it. But it downloaded anyway! I am so mad!
I think it is unethical and very sneaky of AT&T to place all those unnecessary apps on the phone - especially if they turn out to be so costly.
So the only way to delete all those stupid apps is to root the phone? I am not a programmer and I am so afraid that I am going to mess it up
Click to expand...
Click to collapse
Yes, I noticed that I can remove what I have installed. However, I wanted to get rid of pre-installed apps and their icons. I have not found a way to remove those.
Yes root and Rom toolbox app will help you with that.
justcalled said:
Yes, I noticed that I can remove what I have installed. However, I wanted to get rid of pre-installed apps and their icons. I have not found a way to remove those.
Click to expand...
Click to collapse
And if you call Att and tell them that it wasn't authorized they'll credit your account
Sent from my SAMSUNG-SGH-I727 using xda premium
Your wifi is turned on but you aren't connected to your Hoke network...go to settings>wireless and networks>wifi settings>then pick whichever network is yours and put in a password if it requires one
Sent from my SAMSUNG-SGH-I727 using xda premium
nthknd ,
I was hoping for that, but when I called AT&T, they didn't want to credit my account, just the opposite, they made me up my data plan to 2G. They said in the beginning people tend to use data more as they explore the new phone - in a few months, once I figure out my monthly usage, I can change my plan and go back to 200MB or whatever.
They also tried to fix my issues with internet (when only WiFi was showing -no 4G- the phone would not connect to internet). So they fixed it and now I have internet access when only WiFi is showing on the top bar.
On the other hand, now 4G completely disappeared! I haven't seen it all day..
Either AT&T is having technical difficulties or I got disconnected from 4G!
Sorry my advise didn't work but they should credit you since your phone malfunction,guess it depends on who you get guess it's a crap shoot.
Sent from my SAMSUNG-SGH-I727 using xda premium
appdroid said:
Well sometimes for me it shows both icons in status bar. All i do is turn off wifi and turn back and the 4G LTE icon disappears.
Click to expand...
Click to collapse
+1
Sent from my SAMSUNG-SGH-I727
They can't make you!
justcalled said:
nthknd ,
I was hoping for that, but when I called AT&T, they didn't want to credit my account, just the opposite, they made me up my data plan to 2G. They said in the beginning people tend to use data more as they explore the new phone - in a few months, once I figure out my monthly usage, I can change my plan and go back to 200MB or whatever.
They also tried to fix my issues with internet (when only WiFi was showing -no 4G- the phone would not connect to internet). So they fixed it and now I have internet access when only WiFi is showing on the top bar.
On the other hand, now 4G completely disappeared! I haven't seen it all day..
Either AT&T is having technical difficulties or I got disconnected from 4G!
Click to expand...
Click to collapse
They can't make you upgrade your data. The guy you talked to is just trying to rip you off so he gets commission for upgrading you to a "better" data plan. It's your account and you can pick what you want for it. If you want 200 MB then call and switch it back and say the last rep said you had to and made you do it.
I am tired of driving by a McDonalds and Starbucks and my phone thinks it's an open connection and it auto connects. Then I lose data connection for a few because obviously it isn't an open connection and it takes a while to disconnect from the wifi and find the data connection again.
Sent from the future using the Tardis
If you'd like to connect to predefined access points only, there is this way to go: Tasker
Under wifi settings advanced i have notify me when open network available
and auto login unchecked
my wifi never connects automatically except to my home network
rugmankc said:
Under wifi settings advanced i have notify me when open network available
and auto login unchecked
my wifi never connects automatically except to my home network
Click to expand...
Click to collapse
I have those same settings, and because I've connected to a Starbucks before it thinks I can connect to every one. Maybe I'll just go in there and have it forget the Starbucks that I usually go to.
Tasker looks like an interesting option but man that's a bunch of complicated settings!
Sent from the future using the Tardis
think your first choice is best--keep apps to minimum--less issues
I wish there was a way to go through network by network and select autoconnect statuses. All desktop/laptop systems have this option.
Also I do not like the idea of my phone blaring out "I am looking to connect to these networks!" whenever I am not connected to a preferred wifi access point. It is kind of ridiculous.
Surely there is a solution to this, an app, or a setting in an alternate ROM.
Jason Syn said:
I have those same settings, and because I've connected to a Starbucks before it thinks I can connect to every one. Maybe I'll just go in there and have it forget the Starbucks that I usually go to.
Tasker looks like an interesting option but man that's a bunch of complicated settings!
Click to expand...
Click to collapse
Here's another potentially complicated option. Install and setup Llama or another location based profiles app. Set it to only turn on WiFi when at home, work, or at "your" Starbucks.
Introducing LeanDroid:
LeanDroid is a lightweight and incredibly powerful battery saver. It automatically manages the power-hungry radios on your device while the screen is off to significantly lengthen battery life.
Get the most out of your device with the most advanced and efficient battery saver! The no-frills battery saver that actually works!
Features:
-Automatically disables Wi-Fi
-Automatically disables cellular data (root only on Lollipop+)
-Automatically disables cellular radio (root only on Lollipop+)
-Automatically disables Bluetooth
-Automatically disables network location (KitKat+, root only on Lollipop+)
-Automatically disables GPS location (KitKat+, root only on Lollipop+)
-Automatically switches cellular network mode (Lollipop+ and with root)
-Periodically restores connections for sync
-Schedule when LD should be active with the time exception
-Set exceptions for when certain apps are running
-Set exceptions by Wi-Fi name
-Set exceptions by Bluetooth device
-Set exceptions by data transfer speed
-Many more options
-No ads
It can disable WiFi, Cellular Data (2G, 3G, LTE)*, Cellular radio*, Bluetooth, and Location* (networks and GPS) after a certain time with the screen off to conserve battery power and lower data usage. Connections are restored when the screen is turned back on or unlocked, as well as periodically, to allow for notifications to come in. LD will only re-enable connections that it disabled, not all of the selected connections. There are many additional options to set to your preference.
If you have an issue, please email [email protected], or use the contact menu option from the app before leaving a negative review!
Some options explained:
Disable Wi-Fi/Data/Network mode except if active - Connections are only disabled if there is negligible data transfer while the screen is off. Some music services don't "stream" but instead download entire songs at once, and they might do this while the screen is still on. Please set the disable time interval to at least the length of your average song so LD can catch data activity while the screen is off or use the except if "Except if apps running" option.
Disable Wi-Fi except if browser has web login - WiFi is not disabled if it requires a browser login (common for public hotspots or guest networks), so that you do not have to re-enter the password when it is re-enabled.
Disable Wi-Fi except if requires browser login - WiFi is not disabled if it requires a browser login (common for public hotspots or guest networks), so that you do not have to re-enter the password when it is re-enabled.
Disable except if apps running - No connections are disabled if one of the selected apps is found to be running in the foreground or has foreground services. There is a sub-option to also detect background services of the apps.
Restore Data after waiting xx seconds for Wi-Fi to connect - Wait for WiFi to connect before re-enabling cellular data. This prevents data from re-connecting for just a couple of seconds.
Tasker intents
com.teqtic.leandata.INTENT_START_SERVICE
com.teqtic.leandata.INTENT_STOP_SERVICE
* Note:
-Not all options are available on all devices.
-If you are on Android 4.4.1 - 4.4.2, a persistent notification is required due to a bug in KitKat where services cannot restart themselves once killed by the system. If you would like to hide the notification, find LeanDroid in Settings -> Apps, and un-check "show notifications".
Follow us on twitter: @teqTic
To join the Beta tester group:
1) Opt-in here: https://play.google.com/apps/testing/com.teqtic.leandata
2) You will then receive the beta updates directly through the Play store.
Please keep in mind these beta versions will often have bugs!
Download:
Im gonna try this, have used smart radio function but felt it was draining battery a lot. Will keep you posted after trying this
phanitej said:
Im gonna try this, have used smart radio function but felt it was draining battery a lot. Will keep you posted after trying this
Click to expand...
Click to collapse
Thank you sir. Please let me know how well it works for you.
Flyview said:
Thank you sir. Please let me know how well it works for you.
Click to expand...
Click to collapse
Nice work. It works as it is supposed to. Is there any way i can check using terminal(or anything else) how long the radios are turned off or on?
phanitej said:
Nice work. It works as it is supposed to. Is there any way i can check using terminal(or anything else) how long the radios are turned off or on?
Click to expand...
Click to collapse
You mean so that you can tell how long they were turned off for? Good question, there's gotta be some app that can pull up those statistics. For WiFi, you can check your battery usage chart.
Thanks for the feedback, rate it on Google Play if you get a chance. Bugs, suggestions and feature requests are welcome!
Flyview said:
You mean so that you can tell how long they were turned off for? Good question, there's gotta be some app that can pull up those statistics. For WiFi, you can check your battery usage chart.
Thanks for the feedback, rate it on Google Play if you get a chance. Bugs, suggestions and feature requests are welcome!
Click to expand...
Click to collapse
Suggestions:
1. When im playing few multiplayer games like Heroes of Order and Chaos etc, i usually tend to leave my phone aside for one or two min, so with my current setup where the radios are turned off after one min, the internet might get disconnected hence me loosing the game. So if there is a feature which can check if there is data transfer then dont turn off the radios. Same goes with me downloading some files and the radios might turn off causing the download to fail. - I guess it is answered in the description, my mistake
2. Where it says turn on radios to sync/receive after a specific time period, is thee way to only switch on the 2g network to save more juice?
Questions:
1. When the radios are turned on after the specific time period to sync, do all the radios get turned on?
2. Does it already check if there is data transfer and then turn off the radios ?
Edit: Rated the app on Play Store
phanitej said:
Suggestions:
1. When im playing few multiplayer games like Heroes of Order and Chaos etc, i usually tend to leave my phone aside for one or two min, so with my current setup where the radios are turned off after one min, the internet might get disconnected hence me loosing the game. So if there is a feature which can check if there is data transfer then dont turn off the radios. Same goes with me downloading some files and the radios might turn off causing the download to fail.
2. Where it says turn on radios to sync/receive after a specific time period, is thee way to only switch on the 2g network to save more juice?
Questions:
1. When the radios are turned on after the specific time period to sync, do all the radios get turned on?
2. Does it already check if there is data transfer and then turn off the radios ?
Edit: Rated the app on Play Store
Click to expand...
Click to collapse
Suggestion responses:
1. While the screen is on, the connections are never turned off. The time "after" is time after screen off (explained in help dialog or on Play Store).
2) No, there is currently no option to do that. I wouldn't recommend it either. 2G/Edge is so slow it wouldn't even be able to connect and do anything in the brief time it has to sync.
Question responses:
1. Nope, only the connections that were turned off by the app. I will update the app description to make this more clear.
2. Yes I believe right now it is set to a threshold of about 2kB/s. If within the period that it checks, the data transfer is more than this, it will not disable WiFi/data.
Flyview said:
Suggestion responses:
1. While the screen is on, the connections are never turned off. The time "after" is time after screen off (explained in help dialog or on Play Store).
2) No, there is currently no option to do that. I wouldn't recommend it either. 2G/Edge is so slow it wouldn't even be able to connect and do anything in the brief time it has to sync.
Question responses:
1. Nope, only the connections that were turned off by the app. I will update the app description to make this more clear.
2. Yes I believe right now it is set to a threshold of about 2kB/s. If within the period that it checks, the data transfer is more than this, it will not disable WiFi/data.
Click to expand...
Click to collapse
One request, can we have an option to not turn off the radios if connected to charger?
can you add an option for tethering?
phanitej said:
One request, can we have an option to not turn off the radios if connected to charger?
Click to expand...
Click to collapse
Already does that.
Sent from my Nexus 5 using Tapatalk
cottino said:
can you add an option for tethering?
Click to expand...
Click to collapse
Explain? Most phones can already tether stock.
Sent from my Nexus 5 using Tapatalk
Flyview said:
Already does that.
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
Thats strange, i noticed yesterday when my phone was connected to the charger it turned off radios. Maybe something to do with my new ROM that i flashed. Will check it today in the night. Thanks for your response
Yes, but LeandData stop traffic also if tethering is on. In this case every time you have to switch on 3g again and reconnect your notebook.
phanitej said:
Thats strange, i noticed yesterday when my phone was connected to the charger it turned off radios. Maybe something to do with my new ROM that i flashed. Will check it today in the night. Thanks for your response
Click to expand...
Click to collapse
Yes, please check for me as this could potentially be a bug. What did it turn off? It should not turn anything off if the device is charging. Also, if you connect a charger after the app has already turned off connections, it should turn them back on. Please ensure you haven't left any other similar apps running. The WiFi turning off with the screen off could also be a system option.
If you do indeed find a problem please let me know what Android version you are running. You can also check the Logcat if you filter for LeanData. Tell me what you see around the time of the problem.
cottino said:
Yes, but LeandData stop traffic also if tethering is on. In this case every time you have to switch on 3g again and reconnect your notebook.
Click to expand...
Click to collapse
I see. How are you tethering? USB or Bluetooth? If you are tethering through USB the device should be considered charging in which case it should not turn off the connections anyway. I will look into Bluetooth tethering.
Thanks for the feedback.
Flyview said:
Yes, please check for me as this could potentially be a bug. What did it turn off? It should not turn anything off if the device is charging. Also, if you connect a charger after the app has already turned off connections, it should turn them back on. Please ensure you haven't left any other similar apps running. The WiFi turning off with the screen off could also be a system option.
If you do indeed find a problem please let me know what Android version you are running. You can also check the Logcat if you filter for LeanData. Tell me what you see around the time of the problem.
I see. How are you tethering? USB or Bluetooth? If you are tethering through USB the device should be considered charging in which case it should not turn off the connections anyway. I will look into Bluetooth tethering.
Thanks for the feedback.
Click to expand...
Click to collapse
I tethering through Wifi but with my settings the problem is network data:
Flyview said:
Yes, please check for me as this could potentially be a bug. What did it turn off? It should not turn anything off if the device is charging. Also, if you connect a charger after the app has already turned off connections, it should turn them back on. Please ensure you haven't left any other similar apps running. The WiFi turning off with the screen off could also be a system option.
If you do indeed find a problem please let me know what Android version you are running. You can also check the Logcat if you filter for LeanData. Tell me what you see around the time of the problem.
Thanks for the feedback.
Click to expand...
Click to collapse
As expected, i cleaned up everything on my device and flashed a new build. Installed LeanData and used the same settings, all working fine. Radios get turned on when plugged into the charger. Thanks for your time, quick response and efforts
To be honest, i have used many similar apps and never got this almost perfect feeling for any app
Wish i could donate, but running on low budget due to my job. Will donate once things settle down at my end.
cottino said:
I tethering through Wifi but with my settings the problem is network data:
Click to expand...
Click to collapse
I see! I forgot about WiFI tethering, derp. I will add in some logic to not disable connections if tethering as soon as I can. Keep your eyes peeled for an update. Thanks.
phanitej said:
As expected, i cleaned up everything on my device and flashed a new build. Installed LeanData and used the same settings, all working fine. Radios get turned on when plugged into the charger. Thanks for your time, quick response and efforts
To be honest, i have used many similar apps and never got this almost perfect feeling for any app
Wish i could donate, but running on low budget due to my job. Will donate once things settle down at my end.
Click to expand...
Click to collapse
Awesome, keep an eye on it. Thanks for the kind words!
MIUI rom have a application to monitor intenet connect of all application. it's great and I cannot find other app can do like this on Playstore. Bcs many app ask permission connect network althought they are no need to run. But I guest they need permission connect network to sending some information silently.
Different from Sony Stamina mode?
Hi.
I have an xperia device and i would like to know if this app is different from sony's stamina mode, which also switches off connections in idle mode.
Thanks.
GPS might also be a worthy addition!
Only the paid version of dsbatterysaver includes GPS. Right now, I have tasker turn it on and off with the screen when unplugged but that means no syncing of location using GPS.