Related
Dear brother,
could you recommend me how to open CID unlock for dopod 818 pro?.
I had search at XDAwiki but there isn't have literature for G4 Type.
Do me a favor for this problem?
Thanks in advanced.
From all the information that I could gather here is that you can not CID unlock the G4 type of Prophet yet.
Yup, cannot CID unlock the G4 yet.
Although there is a website that offers a service to CID unlock the G4. Guess it's only a matter of time till it's possible for free too. But how long that takes noone knows
But yesterday,
i saw thread in pdamobiz forum that mention can be upgrade or downgrade dopod without unlock the CID..is it possible?
I am not the expert here, but u can upgrade with the NoVendorID.exe Tool without CID unlock? u cant? i was sure u can...
also i saw a thread one said u can use the aWizard Tool to unlock, but i am not sure he was right, he said he did, but dont know i can belive u can use an old Wizard Tool for a new Prophet...
hope it will help ..
mfg s0urce
Again, you can not CID (country ID) unlock the G4 with software as of now.
The other questions of yours have already been answered in other threads of this forum, please use search and consult them first. New threads only make it harder for new people searching for the right threads that already contain the correct answers.
Nonetheless you can update your G4 with new ROM versions the Novendor ID version is one of these ROMs.
But you seem to have hard times reading whats written on these forums anyways, so it would be better for your to stay off of ROM updating if you do not want to brick your phone.
You need to read a lot of stuff (including searching) to understand what you should do.
The people who offer self cooked ROMs have quite a lot of technical experience and understanding what they do and they do it for quite some time now. You ca not simply take stuff from all kind of places pull it in your ROM and happily flash it. There is some sort of brain usage required to do this
I will probably by one of many who posts this subject, but please help!
I have just bought the TyTnII sim-locked by T-Mobile (Holland) and I would reallllly like it to be unlocked.
I have fount a post on how to unlock this, but unfortuntanatly I am not a technician (yet) and understand most of it, but not all. I did read some warnings about some risk..... and would really apreachiate some help.
Thanks,
Alf
read the sticky a few posts above your thread.
whizzy said:
I will probably by one of many who posts this subject, but please help!
I have just bought the TyTnII sim-locked by T-Mobile (Holland) and I would reallllly like it to be unlocked.
I have fount a post on how to unlock this, but unfortuntanatly I am not a technician (yet) and understand most of it, but not all. I did read some warnings about some risk..... and would really apreachiate some help.
Thanks,
Alf
Click to expand...
Click to collapse
You don't need to be a technician to do it. Just need how to read.....
Just follow this step by step guide :
http://forum.xda-developers.com/showthread.php?t=361039
It worked for me the first try...
Everything workes, TyTnII is unlocked, the problem I had was the Bootloader update, The SPL Updater V7 didnt work, (to get it to *.olipof)
After posting this SPL issue, Guif gave me a link right SPL updater, and now everything worksw.
Thank for the help, and I WILL donate to keep this possible!!!
Alf
Hi,
I'm and AT&T Tilt User and wanted to update my ROM for the first time. My question is, if I am planning on updating to an AT&T ROM (Dutty's or Alex's), do I still need to unlock the CID or is that only required for non AT&T ROMs?
Thanks in advance!
Read all stickies and wikis. Hard SPL before doing anything
MobilePhoneUser said:
Hi,
I'm and AT&T Tilt User and wanted to update my ROM for the first time. My question is, if I am planning on updating to an AT&T ROM (Dutty's or Alex's), do I still need to unlock the CID or is that only required for non AT&T ROMs?
Thanks in advance!
Click to expand...
Click to collapse
nah bro, you're good.
follow this yellow brick road:
http://forum.xda-developers.com/showthread.php?t=354061
and then this one:
http://forum.xda-developers.com/showthread.php?t=356895
The two answers above contradict each other...
I did read the sticky first, but it wasn't fully clear:
"1: CID-unlock your device by following the instructions at pof's HTC Kaiser Hard-SPL v1 - CID Unlock & Flash any ROM to your device (4 free)-thread
This needs to be done to flash a ROM to your device which is not created from your provider (or HTC if you own a device with HTC branding)...."
Now, the 2 responses I received above also contradict each other, so now I'm still unclear.
Yes - you MUST flash HardSPL before flashing any ROMs for the Tilt/Kaiser/TYTN II. The quote you talked about means - if AT&T released a ROM upgrade, you wouldn't have to have HardSPL to utilize it. Any other ROMs (cooked, stock HTC, etc.) require HardSPL to be flashed first.
Follow the instructions in this stickie. The others linked above are only if you should have problems. Make sure you've read the wiki and all the stickies before you start flashing. Good luck.
http://forum.xda-developers.com/showthread.php?t=334679
Thank you
That clarifies things! I appreciate it.
OK I just bought on contract a 16GB Moto G. Very happy so far. It downloaded the new 4.4.2 Kitkat. Can't see any difference.
It is locked to Tesco.
My question is, what steps do I now take to get root access and install CWM?
Do I need to unlock the phone first?
Any advantages in using one of the new Mods?
Any other advice welcome. I just know how to follow instructions...:fingers-crossed:
thanks
keveen said:
OK I just bought on contract a 16GB Moto G. Very happy so far. It downloaded the new 4.4.2 Kitkat. Can't see any difference.
It is locked to Tesco.
My question is, what steps do I now take to get root access and install CWM?
Do I need to unlock the phone first?
Any advantages in using one of the new Mods?
Any other advice welcome. I just know how to follow instructions...:fingers-crossed:
thanks
Click to expand...
Click to collapse
Already answered hundreds of times in other threads. Do some reading.
Use search. But do it in the following steps. Unlock the boot loader, then install a custom recovery, then root.
Sent from my XT1032 using XDA Premium 4 mobile app
can we get our Mods to move this to the proper forum? (and also clean up some of the non development posts on this page)
Moved Here as this does not belong in the Dev Sections. Thanks.
Unlocking guide - http://forum.xda-developers.com/showpost.php?p=47705438&postcount=6
To root and get CWM - http://forum.xda-developers.com/showthread.php?t=2585242
** just follow from Now, if you want root, **
Don't forget to thank those who made the guides.
If you ask these questions which are already answered dozens of times i recommend you to read more first before you do anything. Otherwise your next question will be how "to make a phone out ouf my brick?".
OK. Sorry. I get you guys. I just thought maybe the Tesco version might need some different approaches. Actually it is quite hard to find a simple list of "things to do" with your phone, tablet whatever or simple steps you need to follow. Of course the details are more complex. I wasn't sure if I needed to unlock the phone or could do rooting on a locked phone. Maybe each device forum category should have a simple sticky just like that for us non-techies who just follow the instructions without really understanding what is going on.
Also I was half asleep and I see there is actually an excellent introduction. Deaf, dumb and blind...
Hi all,
I have found this simple guide to unlock the bootloader on LG V20 H910 have someone tried it then installed lineage OS 17.1 after please ? :
https://www.hardreset.info/devices/lg/lg-v20-at-and-t-h910/faq/faq/lg-bootloader-unlock/
Thanks a lot for your replies.
Sofiene.Saidi said:
Hi all,
I have found this simple guide to unlock the bootloader on LG V20 H910 have someone tried it then installed lineage OS 17.1 after please ? :
https://www.hardreset.info/devices/lg/lg-v20-at-and-t-h910/faq/faq/lg-bootloader-unlock/
Thanks a lot for your replies.
Click to expand...
Click to collapse
That guide is bs
Sent from my LG-H910 using XDA Labs
cnjax said:
That guide is bs
Sent from my LG-H910 using XDA Labs
Click to expand...
Click to collapse
Can you tell me how please ? This video from 2016 confirm it too :
https://www.youtube.com/watch?v=M-71Z-C4nAA
Yes it was a BS since no bootloader mode in this device so please dirty santa is the unique way ? Please notice I am on oreo so if you have a link to a complete guide please do not hesitate
Sofiene.Saidi said:
Yes it was a BS since no bootloader mode in this device so please dirty santa is the unique way ? Please notice I am on oreo so if you have a link to a complete guide please do not hesitate
Click to expand...
Click to collapse
This is not the right place to ask for help with this... Check out the "guide" section... And ask questions In " Questions & Answers" section.
I think this is best method:
https://forum.xda-developers.com/v20/how-to/guide-root-twrp-lg-v20-using-dirtysanta-t3722278
Others use h915 kdz.
Please refrain from posting on this thread again. It will make me regret helping.
Don't forget to thank people who help you in the thread with thanks button. Specially if the guide they made helps a ton. Note this will get rid of at&t software. I think there is way too restore it still but I have not checked for a while.
this is helpful
Sent from my SM-N9600 using Tapatalk
Is there any current way to unlock the bootloader on the LG V20 H910 with AT&T's latest firmware release? AT&T has locked diown the bootloader, and with LG no longer in the cell phone game, they aren't able to provide the OEM bootloader unlock code as well. A few people have also mentioned that the Dirty Santa no longer works on these devices. Any help would be greatly appreciated.
grmoro said:
Is there any current way to unlock the bootloader on the LG V20 H910 with AT&T's latest firmware release?
Click to expand...
Click to collapse
At least did you try to follow the instructions available? According to this post from October-2022 it worked on H910 AT&T.
dextructor said:
At least did you try to follow the instructions available? According to this post from October-2022 it worked on H910 AT&T.
Click to expand...
Click to collapse
Yes. I tried it and its useless. Struggling to find a bootloader unlock process that actually works for the H910.
grmoro said:
Yes. I tried it and its useless. Struggling to find a bootloader unlock process that actually works for the H910.
Click to expand...
Click to collapse
You are looking for help, because you don't know how to solve it. So we as a community need a little bit of cooperation from everyone to be able to understand if it's a limitation/roadblock of the method, or if you are doing something wrong for whatever reason.
So posting: "don't work", "it's useless" and anything like that not only don't help but discouraging others who read this threads. Tell the problem/error that you encounter.
I found another user who said that he flashed dirtysanta directly and once have TWRP he worked around it the downgrade flashing necessary.
As last resort you can swap the motherboard for one that is vulnerable for the exploit.
But if you wanna some one-click "I don't wanna have trouble" solution, I'm sorry that I can't provide that.
dextructor said:
You are looking for help, because you don't know how to solve it. So we as a community need a little bit of cooperation from everyone to be able to understand if it's a limitation/roadblock of the method, or if you are doing something wrong for whatever reason.
So posting: "don't work", "it's useless" and anything like that not only don't help but discouraging others who read this threads. Tell the problem/error that you encounter.
I found another user who said that he flashed dirtysanta directly and once have TWRP he worked around it the downgrade flashing necessary.
As last resort you can swap the motherboard for one that is vulnerable for the exploit.
But if you wanna some one-click "I don't wanna have trouble" solution, I'm sorry that I can't provide that.
Click to expand...
Click to collapse
I have a clients device that needs to be updated, hence the search to unlock the bootloader and then update the device. The posts I come across, even new ones seem to be reposts of others work from before LG shut down their bootloader unlocking service, so ehen you follow their steps they don't work at various steps. I've been updating devices as far back as Android 1.5 and for some devices its a struggle to update them at all. Replacing the pcb isn't an option right now as the customer won't pay for it. Hence I scour various websites and forums for solutions as other post their success/failure in doing the same on this device. Too often I find people posting about updating their devices, only to find that they either already had their bootloader unlocked before LG shutdown their service to do so, or they just don;t reply to a PM about their process, hence they're fake posts, or old posts from years prior being reposted for no valid purpose. The amount of tim I spend to update peoples devices and test custom ROMs is actually fruitless in terms of money paid, but more for me to keep devices out of the landfills whenever possible. Every time I mod a device I make and keep notes, as well as the files used, stored on one of my NAS as I know I'll be doing it again in the future, including properly and fully testing custom roms to determine if they're actually working properly, or exactly what their issue(s) is(are), and I keep finding a plethora of bugs and issues with too many custom ROMs being pumped out before proper testing. I routinely turn down some device update requests when update steps are convoluted, fractured or even requirements are no longer valid. I'll keep looking around and trying various methods as I come across them. Thx.
No problems, I feel for you because I like to keep people using devices that otherwise would be discarded without real needs.
grmoro said:
I'll keep looking around and trying various methods as I come across them. Thx.
Click to expand...
Click to collapse
Did you try this other method?