Database Info

Is it possible to install WM6 on an I-Mate SP5 ?

hi all
anyone know how to install WM6 on an I-Mate SP5 ?
I've tried this but always run into problems.
1) SPV-Services errors with -2146893818
2) lokiwiz errors with "could not update itsutils.dll"
I have confirmed that i have an active connect to activesync and can sync if needed.
please help !

well, i have had the sp5 rom on my 2125, and i am now running the wm6 va alpha.
either way, i had a lot of slow down issues with the beta version. if you get past the CID unlocking, install the alpha version instead.
also, are you getting that error when you click the CID Tool option?

svtfmook said:
also, are you getting that error when you click the CID Tool option?
Click to expand...
Click to collapse
yeah, any pointers ?

I-Mate WM6 Installation
Hi, I installed WM6 on my SP5 yesterday and so far all is working well. I followed the instructions as set out on the link below with the exception of item number 10.
http://forum.xda-developers.com/showthread.php?t=321408
Although i used the Perfect English version and not mobile 6 Beta, everything works as planned:
1. Flashed with WM6GSMUPDATE.zip
2. Used SPV-Sevices client and run the CID tool.
3. Disabled USB and entered bootload mode
4. Run TeraTermPro and edited as described in that post.
5. Flashed with Perfect English WM6 ROM
6. Downloaded the Short_AP1 ~ Short_AP4 and unzipped to /windows : http://forum.xda-developers.com/attachment.php?attachmentid=46839&d=1186790764
7. Soft Reset.
I had a problem with my contacts due to me not backing up correctly. DSF made a suggestion which has resolved the problem: http://forum.xda-developers.com/showthread.php?t=323136
Regards,
Alex.

alexmw said:
Hi, I installed WM6 on my SP5 yesterday and so far all is working well. I followed the instructions as set out on the link below with the exception of item number 10.
http://forum.xda-developers.com/showthread.php?t=321408
Although i used the Perfect English version and not mobile 6 Beta, everything works as planned:
1. Flashed with WM6GSMUPDATE.zip
2. Used SPV-Sevices client and run the CID tool.
3. Disabled USB and entered bootload mode
4. Run TeraTermPro and edited as described in that post.
5. Flashed with Perfect English WM6 ROM
6. Downloaded the Short_AP1 ~ Short_AP4 and unzipped to /windows : http://forum.xda-developers.com/attachment.php?attachmentid=46839&d=1186790764
7. Soft Reset.
I had a problem with my contacts due to me not backing up correctly. DSF made a suggestion which has resolved the problem: http://forum.xda-developers.com/showthread.php?t=323136
Regards,
Alex.
Click to expand...
Click to collapse
The problem is that the SPV-Sevices errors with -2146893818 so i can't superCID.
exactly what do i need to do with SPV-Sevices to SuperCID the phone ?
this is driving me nuts, i can't even update the ROM with WM6GSMUPDATE.zip, when i do, the ROM update utility goes through it's passes, the indicator progresses to 100% but when the phone reboots, it's still at ROM version 2.5.331.2.
nothing is working !

ipguy said:
The problem is that the SPV-Sevices errors with -2146893818 so i can't superCID.
exactly what do i need to do with SPV-Sevices to SuperCID the phone ?
this is driving me nuts, i can't even update the ROM with WM6GSMUPDATE.zip, when i do, the ROM update utility goes through it's passes, the indicator progresses to 100% but when the phone reboots, it's still at ROM version 2.5.331.2.
nothing is working !
Click to expand...
Click to collapse
The last time SPV services didnt work on my SP5 I realised that I hadnt app unlocked my phone yet. After I unlocked it all went well.

aaroninoraa said:
The last time SPV services didnt work on my SP5 I realised that I hadnt app unlocked my phone yet. After I unlocked it all went well.
Click to expand...
Click to collapse
how does one app unlock the phone ?

With this
App unlock, Super CID, Format BINFS, then run the updates

ipguy said:
how does one app unlock the phone ?
Click to expand...
Click to collapse
Hotsync your phone to your computer and run SDAUnlock. I hope it works for you.
After you upgrade to WM6 you will need to run one of the button fix files associated with the rom. Otherwise your contact and messaging buttons wont work.
whoops too slow tx karhoe

I got the same error when i tried to unlock using the application. Had to use the registry editor and set to entries, after that I could run the st servies app to super cix, then all worked well on my sp5. Bin running wm6 english since last week thursday.
Only prob i have is when my screen goes black, sometimes it actually goes white like when you activate the flashlight application. Also had to disable the light sensor as during the day it was making the screen so light that i couldnt see my screen.

application unlock, then supercid. that -2364527465 problem is the application unlock problem.

burkay said:
application unlock, then supercid. that -2364527465 problem is the application unlock problem.
Click to expand...
Click to collapse
it says "the phone in not unlockable"
i even tried re-flashing with the latest I-Mate ROM and tried app unlocking, no deal.
I can't even see the reg entries in HKLM\Security\Policies\Policies..
What gives ?

Weird. All I did to unlock my phone was to run the attached executable file and it was done. I also have an imate sp5 so I don't know why it is different for you. Just to make sure I am attaching my file. So you can try with it. By the way, I guess your activesync connection must be on when you run this tool. But I am no expert. Just try once more.

Did you reboot your phone anot ?

burkay said:
Weird. All I did to unlock my phone was to run the attached executable file and it was done. I also have an imate sp5 so I don't know why it is different for you. Just to make sure I am attaching my file. So you can try with it. By the way, I guess your activesync connection must be on when you run this tool. But I am no expert. Just try once more.
Click to expand...
Click to collapse
this is hopeless... still can't unlock.
do you think it's due to the fact that i'm running the latest i-mate rom, version 2.5.331.2 ?

ipguy said:
this is hopeless... still can't unlock.
do you think it's due to the fact that i'm running the latest i-mate rom, version 2.5.331.2 ?
Click to expand...
Click to collapse
Dont give up! try these apps. Run the cab from your phone. I think the exe runs from your computer and installs through activesync. Hope you have some luck soon.

cannot change to abc?
karhoe said:
With this
App unlock, Super CID, Format BINFS, then run the updates
Click to expand...
Click to collapse
can i akk u why i cannot change to abc...i only can use 123456 keyonly

ismaizaz said:
can i akk u why i cannot change to abc...i only can use 123456 keyonly
Click to expand...
Click to collapse
Because the ROM comes with no T9 or xT9.
You should install one of these and then add your languages if you need.

ipguy said:
this is hopeless... still can't unlock.
do you think it's due to the fact that i'm running the latest i-mate rom, version 2.5.331.2 ?
Click to expand...
Click to collapse
may be that. before I upgraded to wm6, I never installed a new rom on my imate. So I don't remember what the rom version was, but it wasn't the latest.

Help, I Locked Kaiser in the tricolor screen

I need help. I locked the kaiser run Rom Original Pt in 15%, it locked with error264 ID SALESPERSON INVALID, now he doesn't leave the tricolor screen more, begin other Rom and the same thing.
Rom Version: 3.29.422.1 wwe
Rom Dates: 20/05/08
I radiate Verson: 1.65.20.29
S/N: HT822G002432
She long for has this Rom to try thank.
Thank you very much.

u didn't hardspl first did u? nor did u bother reading all the info this forum has, did u? if u search for kaiser stuck in tricolor screen (bootloader) u will come up with so many results as a post like this is made everyday !!!
now what u need to fix ur problem is either to flash oem original rom or post info from ur bootloader so it can be determined whether u have ruunbh errors or not.

thesire said:
u didn't hardspl first did u? nor did u bother reading all the info this forum has, did u? if u search for kaiser stuck in tricolor screen (bootloader) u will come up with so many results as a post like this is made everyday !!!
now what u need to fix ur problem is either to flash oem original rom or post info from ur bootloader so it can be determined whether u have ruunbh errors or not.
Click to expand...
Click to collapse
I began Rom Original pt, he didn't give right but it restarted, then I used JumSPL1.56 and it turned up to 15% and it locked.
My English is very weak, if it can help where I find this Rom, because I am trying but I don't find.
I would not like to give work, but II would not like to give work, but I am not any getting to solve. Thank you very much for the attention. am not any getting to resolve. Thank you very much for the attention.

Willgb said:
I began Rom Original pt, he didn't give right but it restarted, then I used JumSPL1.56 and it turned up to 15%....
Click to expand...
Click to collapse
Jumpspl is NOT FOR FLASHING roms ... it is strictly for flashing spls ... please please please do yourself the favor and read the wiki. I bet you now have ruunbh errors ... go to your bootloader and see if it says that:
to get bootloader, power down phone than power up while holding down the camera button.

thesire said:
Jumpspl is NOT FOR FLASHING roms ... it is strictly for flashing spls ... please please please do yourself the favor and read the wiki. I bet you now have ruunbh errors ... go to your bootloader and see if it says that:
to get bootloader, power down phone than power up while holding down the camera button.
Click to expand...
Click to collapse
He continues locked in this screen

Willgb said:
He continues locked in this screen
Click to expand...
Click to collapse
okay write down the information posted on that screen and post here... you might have to use a tool called mtty to fix your problem ... but lets me certain first.

thesire said:
okay write down the information posted on that screen and post here... you might have to use a tool called mtty to fix your problem ... but lets me certain first.
Click to expand...
Click to collapse
Good I call and he already appears in the tricolor screen, KAIS 100 SPL-3.29.000 CPLD-8, tried to run Radiate original 1.65.20.29 and it begins but it is locked in the 0%. If you need of more information it is only to say. Thank you for the help

Willgb said:
Good I call and he already appears in the tricolor screen, KAIS 100 SPL-3.29.000 CPLD-8, tried to run Radiate original 1.65.20.29 and it begins but it is locked in the 0%. If you need of more information it is only to say. Thank you for the help
Click to expand...
Click to collapse
okay i think you are just hung after a bad flash and you can use mtty to reboot the os here are the instructions on how to do it:
gsleon3 said:
Use of MTTY to recover from these errors is usually simple. The basic outline of how to use MTTY to resolve these errors is as follows:
1. Right click on the quicklaunch activesync icon on the lower left quadrant of your pc. (You can also just open up the A/S program)
2. Select Connection Settings.
3. Uncheck the box labeled "Allow USB Connections" & then Click "OK".
4. Open MTTY & select "USB from the Port options drop down menu.
5. Select RTS/CTS from the Flow Control Settings & click "OK"
6. Pay attention, because for a brief mmoment MTTY wil report whether or not it could establish a port connection to USB. If you are successful, a Command window will open.
7. Hit the "Enter" key on your PC twice. You should then see a command prompt that looks like this "cmd>".
8. At the command prompt (cmd>) you should enter the command "boot".
This will reboot the device & report back about any errors or bad or erased blocks.
9. If your device was just hung, it should be fine after the reboot. If it returns to Boot Loader however, it means there was a problem with bad blocks.
10. If errors were reported & you end up back at the Boot Loader screen, then repeat the "Boot" Comand at the (cmd>) prompt.
Click to expand...
Click to collapse
and here is the thread that has a link to download mtty.
Make sure you follow the directions to the T... do NOT miss anything... take each step seriously.
to get mtty:
http://forum.xda-developers.com/showthread.php?t=371154

thesire said:
okay i think you are just hung after a bad flash and you can use mtty to reboot the os here are the instructions on how to do it:
and here is the thread that has a link to download mtty.
Make sure you follow the directions to the T... do NOT miss anything... take each step seriously.
to get mtty:
http://forum.xda-developers.com/showthread.php?t=371154
Click to expand...
Click to collapse
The link of the files MTTY to see 1.16.zip and MTTY see 1.42.zip, they have problems you have another link. Thank you.

Willgb said:
The link of the files MTTY to see 1.16.zip and MTTY see 1.42.zip, they have problems you have another link. Thank you.
Click to expand...
Click to collapse
okay i don't know why you having issue make sure you are logged into xda before downloading ... here is the link for 1.42

thesire said:
okay i don't know why you having issue make sure you are logged into xda before downloading ... here is the link for 1.42
Click to expand...
Click to collapse
After I give enter, in the item 7, the mtty is locked. He doesn't answer.

Willgb said:
After I give enter, in the item 7, the mtty is locked. He doesn't answer.
Click to expand...
Click to collapse
I entered in Mtty, I proceeded until appearing cmd >, when I type boot, price Command error!!!.
What to do of here for front?

Willgb said:
I entered in Mtty, I proceeded until appearing cmd >, when I type boot, price Command error!!!.
What to do of here for front?
Click to expand...
Click to collapse
make sure there are no spaces ... otherwise it won't work.

thesire said:
make sure there are no spaces ... otherwise it won't work.
Click to expand...
Click to collapse
I typed without spaces and the same thing happened.

Willgb said:
I typed without spaces and the same thing happened.
Click to expand...
Click to collapse
sigh... you ask for help in private message but even for just this simple instructions given by thesire and you can't follow! You shouldn't even tried to flash a ROM!! Try to work this out first because if you can't, no offense bro but I hope you still have warranty on your Kaiser

pfcsabre said:
sigh... you ask for help in private message but even for just this simple instructions given by thesire and you can't follow! You shouldn't even tried to flash a ROM!! Try to work this out first because if you can't, no offense bro but I hope you still have warranty on your Kaiser
Click to expand...
Click to collapse
The whole commands that were passed already executed and I didn't get progress, the problem is that wandered of program in the hour of updating and I also lost already the warranty. For the that I researched I need Rom Original ROM 3.29.422.1 Radiate 1.65.20.29. If it can help me, I thank. Thank you

Tilt Bricked
pfcsabre said:
sigh... you ask for help in private message but even for just this simple instructions given by thesire and you can't follow! You shouldn't even tried to flash a ROM!! Try to work this out first because if you can't, no offense bro but I hope you still have warranty on your Kaiser
Click to expand...
Click to collapse
I already tried to turn countless Roms and appears error 264. It is for this reason that I sent msg for you in the hope that you can help.
Thank you and excuse if I inconvenienced.

Splash Screen

Can some one please post the original diamond2 splash/boot screen please?

finesse said:
Can some one please post the original diamond2 splash/boot screen please?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=501186

Is there any way to disable to short melody at the beginning ? I tried to disable it via Advanced Config (deleting the reference to the WAV file), but no luck.

mattan said:
Is there any way to disable to short melody at the beginning ? I tried to disable it via Advanced Config (deleting the reference to the WAV file), but no luck.
Click to expand...
Click to collapse
Make a silent soundfile, name it BootUpHTC.wav and overwrite the original in the windows folder.

Thanks Tom for your reply, I actually meant the boot splash screen. Mine is the ugly carrier/operator splash
Thanks

finesse said:
Thanks Tom for your reply, I actually meant the boot splash screen. Mine is the ugly carrier/operator splash
Thanks
Click to expand...
Click to collapse
What boot/splash screen do you mean? on my link:
http://forum.xda-developers.com/showthread.php?t=501186
you wil find te original boot/splash screens.

finesse said:
Thanks Tom for your reply, I actually meant the boot splash screen. Mine is the ugly carrier/operator splash
Thanks
Click to expand...
Click to collapse
Here is one for you (first screen) ... a little late
Just flash via SD-Card.

THANKS!
lcd4linux said:
Here is one for you (first screen) ... a little late
Just flash via SD-Card.
Click to expand...
Click to collapse
Many Thanks....I finaly rid myself and the phone of that T-mobile logo crap!

How do you flash this

WilcoD said:
How do you flash this
Click to expand...
Click to collapse
At the end of this HOWTO is what you're looking for

Thanks I will try it out this evening

Can't get it to work, where do i have to put the TOPAIMG.nbh file on my storage card?
I putted the file directly on my storage card and put the phone into boot loader but it said there was no image file?
I'm using the Energy Rom win mobile 6.5 maybe this is the problem?
I hope someone has the solution so i get rid of the last T-mobile s..t
Thanks

Did you unzipp the TOPAIMG.zip before copying to Storage Card? Put the File in the root from Storage Card, not in any folder. Maybe the Card must be formated (FAT32), some people have probs with wrong formated cards.
Hope this helps.

Still doesn't work
I unzipp the file an put it to a formatted (fat32) storage card.
I do all the things mentioned in the HOWTO but can't get it working.
What am I doing wrong?

Wich device do you own? Did you try the customRUU, look for it in ROM-development forum.

I got a diamond 2 only it's from t-mobile they call it a MDA compact 5.
I want to get rid of all the t-mobile things on my device and the ugly pink color
Yet tried the customruu but nothing happens so I give up

Hi,
So I was thinking can I use the topazRUUwrapper.exe to load the diamond 2 splash screen??
Hope it can be done and I don't end up with a brick.
Please help I still want this.
Thanks

WilcoD said:
Hi,
So I was thinking can I use the topazRUUwrapper.exe to load the diamond 2 splash screen??
Hope it can be done and I don't end up with a brick.
Please help I still want this.
Thanks
Click to expand...
Click to collapse
Can it be done like this??
Edit, just tried it and all went oke it can be done

[Q] p920 debrand ?

Hi. Please could somebody help me. I have a UK model from orange. It's now unlocked but has orange bloatware. I have searched the forums for a debrand method but only found one, and that only works with win xp.
Is there any way to unbrand this phone with windows 7. Orange did not support this phone and it's still stuck on android 2.2.2.
Thanks in advance

miniyon said:
Hi. Please could somebody help me. I have a UK model from orange. It's now unlocked but has orange bloatware. I have searched the forums for a debrand method but only found one, and that only works with win xp.
Is there any way to unbrand this phone with windows 7. Orange did not support this phone and it's still stuck on android 2.2.2.
Thanks in advance
Click to expand...
Click to collapse
AFAIK by installing any custom ROM your phone will be unbranded.

me2freedom said:
AFAIK by installing any custom ROM your phone will be unbranded.
Click to expand...
Click to collapse
Thanks for the reply. I'm after an original LG firmware though.

miniyon said:
Thanks for the reply. I'm after an original LG firmware though.
Click to expand...
Click to collapse
Have you tried updating your phone through EMERGENCY mode in LGFlashTool? Maybe you'll get stock ICS / JB because the branded ones are not made by LG?

03D
me2freedom said:
Have you tried updating your phone through EMERGENCY mode in LGFlashTool? Maybe you'll get stock ICS / JB because the branded ones are not made by LG?
Click to expand...
Click to collapse
Wow, i had no idea ? Who made them ?
How do i go about the process ? To be honest, i'm quite nervous about doing it. I've unbranded a number of phones in the past but this a tad more complicated.
I really appreciate that you have continued to be of help. Thankyou !

miniyon said:
Wow, i had no idea ? Who made them ?
How do i go about the process ? To be honest, i'm quite nervous about doing it. I've unbranded a number of phones in the past but this a tad more complicated.
I really appreciate that you have continued to be of help. Thankyou !
Click to expand...
Click to collapse
Could you try this?
I've done it a few times myself, with succes, and I think this is the way I've managed it.
*This asumes you've installed
Follow this on the official LG site: http://www.lg.com/uk/support-mobile/lg-LGP920 , and go to the tab "software update".
But instead of just updating your phone do this: Click on User/Support (above) then emergency mode, insert your IMEI and click on check

?
It didn't work i'm afraid. What's really odd is that the phone is on froyo 2.2.2 and the OTA update from the phone says there's no update available. Yet the lg update tool tells me an update is available yet after it has downloaded and about to 'install' it stops and says that the update cannot continue because a 'fatal error' has occured ?
Very odd. I'm guessing the orange bloatware is the problem. I HATE orange !
Edit. Ok, i just installed all the flashing tools to my pc (win 7) But when i open flash tool a window appears saying 'lg usb/parallel key is not detected. i'm also asked for a password and id ?

miniyon said:
It didn't work i'm afraid. What's really odd is that the phone is on froyo 2.2.2 and the OTA update from the phone says there's no update available. Yet the lg update tool tells me an update is available yet after it has downloaded and about to 'install' it stops and says that the update cannot continue because a 'fatal error' has occured ?
Very odd. I'm guessing the orange bloatware is the problem. I HATE orange !
Edit. Ok, i just installed all the flashing tools to my pc (win 7) But when i open flash tool a window appears saying 'lg usb/parallel key is not detected. i'm also asked for a password and id ?
Click to expand...
Click to collapse
If you follow this guide you know you got al the right settings: http://www.technopat.net/forum/andr...lg-optimus-3d-ultimate-flash-guide-print.html , it also has pictures to help you, and get the firmware from: http://forum.xda-developers.com/showthread.php?t=2217180

no crack
me2freedom said:
If you follow this guide you know you got al the right settings: http://www.technopat.net/forum/andr...lg-optimus-3d-ultimate-flash-guide-print.html , it also has pictures to help you, and get the firmware from: http://forum.xda-developers.com/showthread.php?t=2217180
Click to expand...
Click to collapse
I downloaded everything but there was no crack included for the flashtool and no .dll file to enter into the flashtool ? it certainly looks incomplete so did not help at all.
Do i really have to keep entering an image verification everytime i need to reply on my own thread ? Seems so daft.

If it is rooted you can delete almost anything you want.

?
drastic00 said:
If it is rooted you can delete almost anything you want.
Click to expand...
Click to collapse
I don't quite follow ? I don't need to delete anything. I'm trying to flash the phone to an updated version of android. I have a UK orange branded p920 3D but it's on froyo 2.2.2 and won't update any further.

I thought you were wanting to delete bloatware. If you want ICS you can try my tutorial
http://forum.xda-developers.com/showthread.php?p=39269819

flash
drastic00 said:
I thought you were wanting to delete bloatware. If you want ICS you can try my tutorial
http://forum.xda-developers.com/showthread.php?p=39269819
Click to expand...
Click to collapse
Funnily enough i tried your method first. The flashtool kept asking for an id and password so i could not continue. Where do i find the id and password ? that was with flashtool 1.1 running on win 7

Copy the indicated file over the original as instructed or use 1.2 if you want. You also have to run the installer before using it...It might be a good idea to run it in xp sp3 compatibility mode.

dll
The link for downloading the p920 .dll file is broken. Is it available anywhere else ?

Thanks for telling me, I'll repost it...
In the mean time you could try this. It's not my link, though
http://d-h.st/Kmp
Hey, link is working. Dev Host must have been down for service.

U should first delete imei if the carrier is locked
Sent from my Nexus 4 using xda app-developers app

link
drastic00 said:
Thanks for telling me, I'll repost it...
In the mean time you could try this. It's not my link, though
http://d-h.st/Kmp
Hey, link is working. Dev Host must have been down for service.
Click to expand...
Click to collapse
Thanks drastic00. I've downloaded the link :good:

not working
I've now tried all methods and nothing works. The furthest i have got so is to hit the yellow start button on the flash tool, but the port does not become ready. I have followed all instructions to the letter.

Recheck step 1 details carefully. Be sure antivirus and Defender are off when downloading and decompressing. It won't start until drivers are installed correctly.
You should see the devices in device manager with no 'blinking' of the omap device, and LG CDMA USB SERIAL, on which you change the port number to 41. Then you are ready to flash.
That part is fiddly.

[FIXED] Flashing Issues with Security Unlocked / Not For Resale phone (Error [340])

UPDATE:
I managed to fix it by first running the ACDU fix and then installing the European RUU over it! It even updates now!!
ACDU.exe (click the button on the right to download)
Released RUUs for HTC 8X (make sure to get one that corresponds to your device!)
KEEP IN MIND THAT THIS HAS WORKED FOR ME AND MY SECURITY UNLOCKED DEVICE,
THERE IS NO GUARANTEE THAT IT WILL WORK FOR YOU
IF YOU BRICK YOUR DEVICE, IT'S ON YOU.​
Steps:
Put your device in the bootloader screen by powering it off, and then turning it back on while holding the vol up + vol down buttons simultaneously.
Connect the device to your computer and let Windows locate and install the driver needed. Wait until the driver is fully installed and/or you can see the word USB written on the bootloader screen.
Run the ACDU.exe file and let it do its job (This supposedly unbrands your phone!). It should restart a couple of times showing a green screen and then eventually go into the bootloader menu. It might say something like "UEFI for Key Provision ONLY" in red letters, ignore that.
Run the RUU you've downloaded and if everything goes as planned it should flash correctly. If not, make sure you've downloaded the correct RUU for your device and that it's not corrupted.
Enjoy your (unbricked and) updatable security unlocked device.
I hope this helps!!
Source used (it's in chinese): http://bbs.lumwp.com/thread-133710-1-1.html
---------------------------------------------------------------------------------------
Hello,
I have an HTC 8X that appears to be security unlocked and therefore could not receive updates.
In my infinite wisdom, I decided to try to flash the European RUU that has been released in the internet, hoping it would allow me to update the phone further. I did not proceed unprepared and I did indeed check that the phone was European (it initially had the OS version: 2.00.401.03) so it looked as if everything matched.
However, after starting the update, RUU flashed some UEFI related files and then the phone restarted. It started up and resumed the main firmware flashing process, stopping at the 1% mark and restarting back the bootloader.
The error code reported by RUU is the following:
Error [340]: ENCSS_VERIFY_ERROR
SSD Error, please flash subsystem does not encrypted image
The error message is kinda incoherent and I can't find anything about it (except in a thread in XDA, where someone states that this might be because I need an American firmware?), what's worse is that I'm left with a soft-bricked device that I can do nothing with since it can only boot to the bootloader.
The device is unlocked, unbranded and security unlocked (CID: 11111111), yet I'm still stuck.
If I try to flash only the UEFI stuff (by removing the RUU .nbh from the directory), the device is then able to boot to the HTC logo and get into the dual gear screen, where it gets stuck. The hard reset option does not seem to work at all, the phone restarts at the HTC logo if I keep the vol down button pressed. Strangely, I can get into the lightning screen but I dunno what that might do.
Did I mention that the device cannot shutdown? Yeah... It only restarts...
Does anyone know any way to fix this? Or why this might be occuring?
Click to expand...
Click to collapse

I've managed to fix it and I've included the solution in my first post. I hope this helps.

This just skips the CID check.
You can also change the CID by command to like HTC__001 and get the OTA's and be able to install RUU's the normal way.

help
xmoo said:
This just skips the CID check.
You can also change the CID by command to like HTC__001 and get the OTA's and be able to install RUU's the normal way.
Click to expand...
Click to collapse
i have a 8x(620e) bricked after updating wp8.1.It booted after updated but auto bootboop before wp8.1 gui.I try to hard reset,it can not help.So i try to flash it.but it says image version ledd than device version.Can you help me?Thanks.

fengsam said:
i have a 8x(620e) bricked after updating wp8.1.It booted after updated but auto bootboop before wp8.1 gui.I try to hard reset,it can not help.So i try to flash it.but it says image version ledd than device version.Can you help me?Thanks.
Click to expand...
Click to collapse
Nope I can't. I'm new in the Windows Phone world. I'm a Android pro

help
Potis20 said:
UPDATE:
I managed to fix it by first running the ACDU fix and then installing the European RUU over it! It even updates now!!
ACDU.exe (click the button on the right to download)
Released RUUs for HTC 8X (make sure to get one that corresponds to your device!)
KEEP IN MIND THAT THIS HAS WORKED FOR ME AND MY SECURITY UNLOCKED DEVICE,
THERE IS NO GUARANTEE THAT IT WILL WORK FOR YOU
IF YOU BRICK YOUR DEVICE, IT'S ON YOU.​
Steps:
Put your device in the bootloader screen by powering it off, and then turning it back on while holding the vol up + vol down buttons simultaneously.
Connect the device to your computer and let Windows locate and install the driver needed. Wait until the driver is fully installed and/or you can see the word USB written on the bootloader screen.
Run the ACDU.exe file and let it do its job (This supposedly unbrands your phone!). It should restart a couple of times showing a green screen and then eventually go into the bootloader menu. It might say something like "UEFI for Key Provision ONLY" in red letters, ignore that.
Run the RUU you've downloaded and if everything goes as planned it should flash correctly. If not, make sure you've downloaded the correct RUU for your device and that it's not corrupted.
Enjoy your (unbricked and) updatable security unlocked device.
I hope this helps!!
Source used (it's in chinese): http://bbs.lumwp.com/thread-133710-1-1.html
---------------------------------------------------------------------------------------
Click to expand...
Click to collapse
could you list your bootloader message?

fengsam said:
could you list your bootloader message?
Click to expand...
Click to collapse
Well, after updating to GDR3, it seems that the bootloader messages have changed.
As of right now, it says
Security Unlocked
PM2320001 P S WP8 I (Before flashing ACDU, I think it used to be only "PM230001")
SBL1-1.0.21009.0
SBL2-1.0.21009.0
SBL3-1.0.21009.0
RPM-1.1.03078.0
TZ-303.000.241
UEFI-0.0.3030.0(175731) (Before updating, it used to be something like "15****", where * = numbers)
OS-4.12.401.01 (Before updating, it used to be 2.00.401.03)
CID-11111111
Radio-1.20b-32-19.04_15.67b.32.19 (Before flashing/updating, it used to be something like "1.11b.32.19.23")
fengsam said:
i have a 8x(620e) bricked after updating wp8.1.It booted after updated but auto bootboop before wp8.1 gui.I try to hard reset,it can not help.So i try to flash it.but it says image version ledd than device version.Can you help me?Thanks.
Click to expand...
Click to collapse
Ah, that's unfortunate. I don't know of a way to bypass the version check. =/ I don't understand why they're making things so difficult for end users. If you're flashing a full ROM, then you don't care what the previous one was... The only thing I can think of is that maybe on each update they blow a fuse so that you can't go back, like on the Xbox360
xmoo said:
This just skips the CID check.
You can also change the CID by command to like HTC__001 and get the OTA's and be able to install RUU's the normal way.
Click to expand...
Click to collapse
How would I go around doing that?

Potis20 said:
Well, after updating to GDR3, it seems that the bootloader messages have changed.
As of right now, it says
Security Unlocked
PM2320001 P S WP8 I (Before flashing ACDU, I think it used to be only "PM230001")
SBL1-1.0.21009.0
SBL2-1.0.21009.0
SBL3-1.0.21009.0
RPM-1.1.03078.0
TZ-303.000.241
UEFI-0.0.3030.0(175731) (Before updating, it used to be something like "15****", where * = numbers)
OS-4.12.401.01 (Before updating, it used to be 2.00.401.03)
CID-11111111
Radio-1.20b-32-19.04_15.67b.32.19 (Before flashing/updating, it used to be something like "1.11b.32.19.23")
Ah, that's unfortunate. I don't know of a way to bypass the version check. =/ I don't understand why they're making things so difficult for end users. If you're flashing a full ROM, then you don't care what the previous one was... The only thing I can think of is that maybe on each update they blow a fuse so that you can't go back, like on the Xbox360
How would I go around doing that?
Click to expand...
Click to collapse
Your message is same with mine.http://forum.xda-developers.com/showthread.php?t=2722104

fengsam said:
Your message is same with mine.http://forum.xda-developers.com/showthread.php?t=2722104
Click to expand...
Click to collapse
Well, unless we can find a way to bypass the OS version check set by HTC (or MS?), I guess you're stuck. =(
I was thinking of updating to 8.1 but after the whole ordeal above, I said "**** it, I'll get it when it's updatable! I'm not taking the change of bricking it again.."
..This captcha thing is starting to get very annoying...

Potis20 said:
Well, unless we can find a way to bypass the OS version check set by HTC (or MS?), I guess you're stuck. =(
I was thinking of updating to 8.1 but after the whole ordeal above, I said "**** it, I'll get it when it's updatable! I'm not taking the change of bricking it again.."
..This captcha thing is starting to get very annoying...
Click to expand...
Click to collapse
I think the OS version check set by htc.Because htc8s can still downgrade by reflashing ruu.I am very happy to update wp8.1,but bricked.

@Potis20 Can you re-upload the ACDU.exe file? The link says the file was removed...

Can someone upload ACDU.exe fix file again??
I have HTC wp 8x from O2 and i try to unlock with your instructions :good:

Threshergr said:
Can someone upload ACDU.exe fix file again??
I have HTC wp 8x from O2 and i try to unlock with your instructions :good:
Click to expand...
Click to collapse
I don't have the ACDU file but I was able to unlock my phone using the ACDU_UEFI_PROV_KEY.nbh file.
1. Download ACDU_UEFI_PROV_KEY https://mega.co.nz/#!UlMS1CyQ!rX-5-U6mmBHncVw6etFYeuSuV-OLX1De-jgkgEGf6FU
2. Put the ACDU file in the same directory as the ROMUpdateUtility (move the other .nbh files to another folder)
3. Run ROMUpdateUtility.exe
4. Phone should flash and unlock
5. Delete the ACDU_UEFI_PROV_KEY file
6. Move the UEFI_signed.nbh and RUU_signed.nbh files back
7. Run ROMUpdateUtility.exe again to flash ROM

Can someone upload ACDU.exe fix file again??
please !!!!!!!!!!!!!!

Same issue with HTC 8x Security Unlocked CID 1111111
Error [340]: ENCSS_VERIFY_ERROR
can you share your complete files package here?
thanks

i have downloaded latest nbh files for my HTC 8X by using windows device recovery tool and use the flash utility with nbh files as u said still no results. get the error : 340 encss verify error
SSD Error Please Flash subsystem does not encrypted image