hi all
anyone know how to install WM6 on an I-Mate SP5 ?
I've tried this but always run into problems.
1) SPV-Services errors with -2146893818
2) lokiwiz errors with "could not update itsutils.dll"
I have confirmed that i have an active connect to activesync and can sync if needed.
please help !
well, i have had the sp5 rom on my 2125, and i am now running the wm6 va alpha.
either way, i had a lot of slow down issues with the beta version. if you get past the CID unlocking, install the alpha version instead.
also, are you getting that error when you click the CID Tool option?
svtfmook said:
also, are you getting that error when you click the CID Tool option?
Click to expand...
Click to collapse
yeah, any pointers ?
I-Mate WM6 Installation
Hi, I installed WM6 on my SP5 yesterday and so far all is working well. I followed the instructions as set out on the link below with the exception of item number 10.
http://forum.xda-developers.com/showthread.php?t=321408
Although i used the Perfect English version and not mobile 6 Beta, everything works as planned:
1. Flashed with WM6GSMUPDATE.zip
2. Used SPV-Sevices client and run the CID tool.
3. Disabled USB and entered bootload mode
4. Run TeraTermPro and edited as described in that post.
5. Flashed with Perfect English WM6 ROM
6. Downloaded the Short_AP1 ~ Short_AP4 and unzipped to /windows : http://forum.xda-developers.com/attachment.php?attachmentid=46839&d=1186790764
7. Soft Reset.
I had a problem with my contacts due to me not backing up correctly. DSF made a suggestion which has resolved the problem: http://forum.xda-developers.com/showthread.php?t=323136
Regards,
Alex.
alexmw said:
Hi, I installed WM6 on my SP5 yesterday and so far all is working well. I followed the instructions as set out on the link below with the exception of item number 10.
http://forum.xda-developers.com/showthread.php?t=321408
Although i used the Perfect English version and not mobile 6 Beta, everything works as planned:
1. Flashed with WM6GSMUPDATE.zip
2. Used SPV-Sevices client and run the CID tool.
3. Disabled USB and entered bootload mode
4. Run TeraTermPro and edited as described in that post.
5. Flashed with Perfect English WM6 ROM
6. Downloaded the Short_AP1 ~ Short_AP4 and unzipped to /windows : http://forum.xda-developers.com/attachment.php?attachmentid=46839&d=1186790764
7. Soft Reset.
I had a problem with my contacts due to me not backing up correctly. DSF made a suggestion which has resolved the problem: http://forum.xda-developers.com/showthread.php?t=323136
Regards,
Alex.
Click to expand...
Click to collapse
The problem is that the SPV-Sevices errors with -2146893818 so i can't superCID.
exactly what do i need to do with SPV-Sevices to SuperCID the phone ?
this is driving me nuts, i can't even update the ROM with WM6GSMUPDATE.zip, when i do, the ROM update utility goes through it's passes, the indicator progresses to 100% but when the phone reboots, it's still at ROM version 2.5.331.2.
nothing is working !
ipguy said:
The problem is that the SPV-Sevices errors with -2146893818 so i can't superCID.
exactly what do i need to do with SPV-Sevices to SuperCID the phone ?
this is driving me nuts, i can't even update the ROM with WM6GSMUPDATE.zip, when i do, the ROM update utility goes through it's passes, the indicator progresses to 100% but when the phone reboots, it's still at ROM version 2.5.331.2.
nothing is working !
Click to expand...
Click to collapse
The last time SPV services didnt work on my SP5 I realised that I hadnt app unlocked my phone yet. After I unlocked it all went well.
aaroninoraa said:
The last time SPV services didnt work on my SP5 I realised that I hadnt app unlocked my phone yet. After I unlocked it all went well.
Click to expand...
Click to collapse
how does one app unlock the phone ?
With this
App unlock, Super CID, Format BINFS, then run the updates
ipguy said:
how does one app unlock the phone ?
Click to expand...
Click to collapse
Hotsync your phone to your computer and run SDAUnlock. I hope it works for you.
After you upgrade to WM6 you will need to run one of the button fix files associated with the rom. Otherwise your contact and messaging buttons wont work.
whoops too slow tx karhoe
I got the same error when i tried to unlock using the application. Had to use the registry editor and set to entries, after that I could run the st servies app to super cix, then all worked well on my sp5. Bin running wm6 english since last week thursday.
Only prob i have is when my screen goes black, sometimes it actually goes white like when you activate the flashlight application. Also had to disable the light sensor as during the day it was making the screen so light that i couldnt see my screen.
application unlock, then supercid. that -2364527465 problem is the application unlock problem.
burkay said:
application unlock, then supercid. that -2364527465 problem is the application unlock problem.
Click to expand...
Click to collapse
it says "the phone in not unlockable"
i even tried re-flashing with the latest I-Mate ROM and tried app unlocking, no deal.
I can't even see the reg entries in HKLM\Security\Policies\Policies..
What gives ?
Weird. All I did to unlock my phone was to run the attached executable file and it was done. I also have an imate sp5 so I don't know why it is different for you. Just to make sure I am attaching my file. So you can try with it. By the way, I guess your activesync connection must be on when you run this tool. But I am no expert. Just try once more.
Did you reboot your phone anot ?
burkay said:
Weird. All I did to unlock my phone was to run the attached executable file and it was done. I also have an imate sp5 so I don't know why it is different for you. Just to make sure I am attaching my file. So you can try with it. By the way, I guess your activesync connection must be on when you run this tool. But I am no expert. Just try once more.
Click to expand...
Click to collapse
this is hopeless... still can't unlock.
do you think it's due to the fact that i'm running the latest i-mate rom, version 2.5.331.2 ?
ipguy said:
this is hopeless... still can't unlock.
do you think it's due to the fact that i'm running the latest i-mate rom, version 2.5.331.2 ?
Click to expand...
Click to collapse
Dont give up! try these apps. Run the cab from your phone. I think the exe runs from your computer and installs through activesync. Hope you have some luck soon.
cannot change to abc?
karhoe said:
With this
App unlock, Super CID, Format BINFS, then run the updates
Click to expand...
Click to collapse
can i akk u why i cannot change to abc...i only can use 123456 keyonly
ismaizaz said:
can i akk u why i cannot change to abc...i only can use 123456 keyonly
Click to expand...
Click to collapse
Because the ROM comes with no T9 or xT9.
You should install one of these and then add your languages if you need.
ipguy said:
this is hopeless... still can't unlock.
do you think it's due to the fact that i'm running the latest i-mate rom, version 2.5.331.2 ?
Click to expand...
Click to collapse
may be that. before I upgraded to wm6, I never installed a new rom on my imate. So I don't remember what the rom version was, but it wasn't the latest.
Related
tried 20 times now... downloaded the rar file form rapidshare....
extraced...
then ran the program keep getting the dam 101 connection error... what gives did everything perfectly...
Did the same thing here this afternoon and it went well here.
You didn't forget to set the Universal in bootloader mode?
robertwebbe said:
Did the same thing here this afternoon and it went well here.
You didn't forget to set the Universal in bootloader mode?
Click to expand...
Click to collapse
hmm... how u do that...
scott_donald said:
hmm... how u do that...
Click to expand...
Click to collapse
You can find this in the wiki: http://wiki.xda-developers.com/index.php?pagename=Radio only upgrade instructions.
By the way, a hard reset in not necessary if you only upgrade your radiostack, softreset is enough.
scott_donald said:
hmm... how u do that...
Click to expand...
Click to collapse
My God! It really scares me how many people have said this kinda thing recently!!! Honestly, people... it's a forum! Do some research!!!!
robertwebbe said:
You can find this in the wiki: http://wiki.xda-developers.com/index.php?pagename=Radio only upgrade instructions.
By the way, a hard reset in not necessary if you only upgrade your radiostack, softreset is enough.
Click to expand...
Click to collapse
you mean i just soft reset even though i`m still in bootloader mod?
ahmadfarid said:
you mean i just soft reset even though i`m still in bootloader mod?
Click to expand...
Click to collapse
Yes, once it is ready and says to hard-reset, unplug your Universal and just press the reset button.
By the way my friend, did you read the wiki?
keep us posted abt ur latest upgrade and how is ur new radio working?
robertwebbe said:
Yes, once it is ready and says to hard-reset, unplug your Universal and just press the reset button.
By the way my friend, did you read the wiki?
Click to expand...
Click to collapse
i`m always do a hard reset whenever i do radio upgrade..or CE upgrade..maybe i did not read the wiki carefully...
niketkumar said:
keep us posted abt ur latest upgrade and how is ur new radio working?
Click to expand...
Click to collapse
Until now no radio hangings for me. With 1.14.10 I probably had to reset already a couple of times.
Hopefully it will stay this way .
somehow i feel radio 1.14.10 is more stable here in Malaysia than radio 1.15.00. I lost signal few times on radio 1.15.00 and sometime the reception is intermitten.
Radio 1.15
Can someone post a link to it please.
Works firewall blocks rapidshare (
MarkJL said:
Can someone post a link to it please.
Works firewall blocks rapidshare (
Click to expand...
Click to collapse
see post : http://forum.xda-developers.com/showthread.php?t=298090
omega_
Senior Member Join Date: Jun 2005
Posts: 168
Radio 1.15
--------------------------------------------------------------------------------
Changelog: none at the moment
Radio-only upgarde guide:
ftp://xda:[email protected]/Uploads/Universal/Radio/11500_Radio_only.rar
Download links:
Code:
http://rs45.rapidshare.com/files/21256271/11500_Radio_only.rar
Radio 1.15
Job done. Thank you
scott_donald said:
tried 20 times now... downloaded the rar file form rapidshare....
extraced...
then ran the program keep getting the dam 101 connection error... what gives did everything perfectly...
Click to expand...
Click to collapse
If the error pops up on the PC display at the end of the flash process, don't worry...... this don't mean nothing, the data upload has finished regularly. Boot you device and check the Radio version....... it would be 1.15.00
I thought 1.15 had solved all my problems - I certainly never lost phone connection switching from 3G to GPRS (which I did with 1.13, 1.14 and, to a lesser extent 1.09) but now can't maintain a connection to the internet!
I upgraded to 1.15 earlier on in the week and all seemed to be finmr until 8:26 yesterday morning (the last time activesync synched my push email) Since then I get connectine, then locating foolowed bu a message telling me my connection has been dropped. This happens at home in mid-sussex and at work in Woking and in between so not a localised proiblem.
I'm using an O2 Exec on T-Mob W'n'W using jwrightmscp's WM6 - anyone else having problems?
<--Still rolling with 1.09
i have downloaded the tnt cab file & coppied them to windows is that correct or were must i place the to install ?
??? You must click on the cabs to install it in WMobile.
have tried (setup in cabs)
jacknjill said:
??? You must click on the cabs to install it in WMobile.
Click to expand...
Click to collapse
the cab shows it is installed but the program dose not run.
The Cabs...
Try Copying the cabs in my documents folder. and afer that , go using the file manager and run them. that should work
did you reboot?
i have just done that bet still the same have softreset & booted again but no programs.
Robertnam said:
am i stupid or what
Click to expand...
Click to collapse
I was going to go with "what", but after carefully considering your question, and reading your comments, I think I have to go with "stupid".
Wait a seccond... There are cab files for roms these days? When did this happen and why wasn't I informed? lol
dharvey4651 said:
Wait a seccond... There are cab files for roms these days? When did this happen and why wasn't I informed? lol
Click to expand...
Click to collapse
This really is the key isn't it? I think the OP is trying to execute the upgrade program from his phone.
To the OP you must run the upgrade from a Windows PC.
Kirby
rkwhyte2 said:
This really is the key isn't it? I think the OP is trying to execute the upgrade program from his phone.
To the OP you must run the upgrade from a Windows PC.
Kirby[/QUOTE
I cannot use ActiveSync (any version) to upgrade my MDA. I have been all over this site and other sites. I have tried everything to get ActiveSync to work and connect to my phone. I have had a lot of people on this forum trying to get me operational. No Luck.
So, can I donwload a CAB file to upgrade my Phone ISP/SPL and OS to my MDA SD card and then install from the SD Card like I do other apps?
I believe the answer is no based on this thread. But, I will not give up hope.
Thank you in advance.
ISP/SPL 2.26
Radio 2.25.11
OS WxtROM 2.26.10.2
MSW CE 5.1.195
Click to expand...
Click to collapse
asctony said:
rkwhyte2 said:
This really is the key isn't it? I think the OP is trying to execute the upgrade program from his phone.
To the OP you must run the upgrade from a Windows PC.
Kirby[/QUOTE
I cannot use ActiveSync (any version) to upgrade my MDA. I have been all over this site and other sites. I have tried everything to get ActiveSync to work and connect to my phone. I have had a lot of people on this forum trying to get me operational. No Luck.
So, can I donwload a CAB file to upgrade my Phone ISP/SPL and OS to my MDA SD card and then install from the SD Card like I do other apps?
I believe the answer is no based on this thread. But, I will not give up hope.
Thank you in advance.
ISP/SPL 2.26
Radio 2.25.11
OS WxtROM 2.26.10.2
MSW CE 5.1.195
Click to expand...
Click to collapse
maybe i missed it but have you tried forcing your phone into bootloader and loading a new rom. will your usb not work or do you not have access to a computer with activesync???
Click to expand...
Click to collapse
neva dinova said:
asctony said:
maybe i missed it but have you tried forcing your phone into bootloader and loading a new rom.
No, I have not tried forcing my MDA into bootlader and loading a new rom. Not sure what to do?
will your usb not work or do you not have access to a computer with activesync???
Click to expand...
Click to collapse
My 4 PCs recognize the MDA as a Windows Mobile device, but AS will not connect.
Have uninstalled and reinstalled all versions of AS from 4.1 - 4.5.
Thanks for your input and time. I do appreciate it.
Click to expand...
Click to collapse
swingheim said:
I was going to go with "what", but after carefully considering your question, and reading your comments, I think I have to go with "stupid".
Click to expand...
Click to collapse
I'll go with "stupid" too
oscarillo said:
I'll go with "stupid" too
Click to expand...
Click to collapse
Please guys, I am asking nicely now. This is not a place to insult other people.
Just answer questions if you know the answer or don't bother at all if you don't want to help.
NOTES :
In order to upgrade a ROM, you'll need a PC with ActiveSync installed and an USB cable to connect them
There is the possibility to flash from SD card but that is only in emergency cases, and it's not recommended. Plus i don't know if it will work unless the SD Image isn't your own.
Hi!
Just purchased my Dopod C730 today, its China Mobile Branded, but since i'm going home in June I might aswell get rid of the China mobile branded firmware. I downloaded the New Guava ROM 1.0 and tried to update the phone but it said corrupt image.
I use to be kinda good at this stuff but 6 months in Shanghai with that polution might have set me back
Anybody that can provide me a guide or some update that will work? I need a clean firmware without chinese language.
Thanks for your help!
I think if you did not already done, try to download again the file.
And follow the step on "How-To" txt file included on the folder you have downloaded.
I would say you didn't app unlock and you didn't do uspl. Everything in the readme file!
frauhottelmann said:
I would say you didn't app unlock and you didn't do uspl. Everything in the readme file!
Click to expand...
Click to collapse
You are correct But I seem not to find the USPL.bat, only USPL_116_jockyw. When I try to run that, it says "No Application associated with uspl_116_jackyw. Run the Applicatioon first then open this file inside the application". The App unlock said phone unlocked.
Marcbis said:
You are correct But I seem not to find the USPL.bat, only USPL_116_jockyw. When I try to run that, it says "No Application associated with uspl_116_jackyw. Run the Applicatioon first then open this file inside the application". The App unlock said phone unlocked.
Click to expand...
Click to collapse
The name of file is "uspl_116_jockyw.bat"
So had the extension of the file if they are not hide...
lerameur said:
The name of file is "uspl_116_jockyw.bat"
So had the extension of the file if they are not hide...
Click to expand...
Click to collapse
Yes, but it won't run
did you unrar the file?
did you try to download again?
lerameur said:
did you unrar the file?
did you try to download again?
Click to expand...
Click to collapse
Yes, i unrared it.
I have tried two different versions, the one bundled with the ROM and the orginal one.
Very strange, i can't hard-reset at all. I've run the Security Configuration Manager fra Microsoft said that Security should be off. Still it says no to running the bat file.
Today, I am a happy little boy. Apparently I (big surprise) did it all wrong. My phone is currently booting for the first time Thanks for the help from you two guys
Edit:
Ohh this is soooo sweet compared to the China mobile setting, only bad thing is that I can't see chinese characters. But i can live without it
Marcbis said:
Today, I am a happy little boy. Apparently I (big surprise) did it all wrong. My phone is currently booting for the first time Thanks for the help from you two guys
Edit:
Ohh this is soooo sweet compared to the China mobile setting, only bad thing is that I can't see chinese characters. But i can live without it
Click to expand...
Click to collapse
If you want Chinese characters then try this ROM. It is better than any WM6 ROM.
http://forum.xda-developers.com/showthread.php?t=381094
Roland
Rolandh said:
If you want Chinese characters then try this ROM. It is better than any WM6 ROM.
http://forum.xda-developers.com/showthread.php?t=381094
Roland
Click to expand...
Click to collapse
Thanks, but im gonna stick with the english, my chinese characters is kinda rusty Im only gonna be here 2 months more and everyone writes in english. But thanks anyway.
But can anyone recommend a good GPS program?
China Mobile Dopod C730
how long does this black or kind greenish screen last? it has been there for almost 20mins, and i could see things like Vox ONBL and ruu
how long does this black or kind greenish green last? it has been there for almost 20mins, and i could see things like Vox ONBL and ruu
5.05A
Just Download Elf.zip for ELFIN Service manual.pdf, u'll know how to use it.
911sniper said:
2008/08/18 Release V5.05A for ASP
Click to expand...
Click to collapse
Holy crap!
Thanks! now let's see if this helps with Gold Card users not being able to unbrick.
can u plz explain me what this actually is? am guessing its a diagnostic utility for the elf but how and when are we supposed to use it?
xmodinc said:
can u plz explain me what this actually is? am guessing its a diagnostic utility for the elf but how and when are we supposed to use it?
Click to expand...
Click to collapse
There's some information in the Herald Goldcard page (check the link from the Elfin Goldcard wiki).
I haven't tried it yet.. but maybe it does some cool stuff like bypassing Model ID check?
Are you able to get the SDO file as mentioned in the service manual (page 35)? I assume this is an all-Elf unbricking image.
The HTC website requires login to obtain it.
dsixda said:
Are you able to get the SDO file as mentioned in the service manual (page 35)? I assume this is an all-Elf unbricking image.
The HTC website requires login to obtain it.
Click to expand...
Click to collapse
Can't help for that...
Hi!
I test the file on my bricked Elfin.
Normal flashing via SD card is impossible because the bootloader doesn't start the flash process.
However the diagnostic file runs without any errors.
Only the last menue point of the screenshots "Change ColourID" isn't at my screen.
My ELFin is still bricked, maybe there is a special trick to unhide this menue entry
sandman01 said:
Only the last menue point of the screenshots "Change ColourID" isn't at my screen.
Click to expand...
Click to collapse
Same here.
sandman01 said:
Hi!
I test the file on my bricked Elfin.
Normal flashing via SD card is impossible because the bootloader doesn't start the flash process.
However the diagnostic file runs without any errors.
Only the last menue point of the screenshots "Change ColourID" isn't at my screen.
My ELFin is still bricked, maybe there is a special trick to unhide this menue entry
Click to expand...
Click to collapse
Try this version. Compatible with ELFIN & Add [Change Color ID].
911sniper said:
Try this version. Compatible with ELFIN & Add [Change Color ID].
Click to expand...
Click to collapse
Hey bro, what does changing Color ID do?
EDIT: Booting from elf0diag.nbh makes it go into a DIAG> prompt in MTTY. I don't know what commands to use though.
I think it's no use whit the MTTY. Many official tools are the elf0diag.nbh format.
911sniper said:
I think it's no use whit the MTTY. Many official tools are the elf0diag.nbh format.
Click to expand...
Click to collapse
When this one starts, it says "Please Input Password".
Note: You cannot start any ELF0DIAG.nbh from SD if you have a USPL installed; you have to flash a signed SPL first.
PLUS IT WILL HARD RESET YOUR DEVICE IMMEDIATELY AFTER IT STARTS UP, WITHOUT ASKING....
dsixda said:
When this one starts, it says "Please Input Password".
Note: You cannot start any ELF0DIAG.nbh from SD if you have a USPL installed; you have to flash a signed SPL first.
PLUS IT WILL HARD RESET YOUR DEVICE IMMEDIATELY AFTER IT STARTS UP, WITHOUT ASKING....
Click to expand...
Click to collapse
i never used these tools before...
can't help more...
Hi!
I testet the new diagnostic File, and now I can change the Color ID.
Black and Green are available.
Black change the MID to ELF030000
Green change the MID to ELF030001
The original MID can't be restored!?!?!?! (it was ELF030050)
Maybe there are more Versions of the diagnostic tool which change the device into other colors.
I make exactrly whatever is writen there but I get message:
Security level not cleared!
What I suppose to do to avoid this and to get into test?
Hi, dsixda!
Bro' I'm in trouble...
The device was in tricolor bootloader.
Untill i work with your onix 4.0 was OK! but I decide to go back. So I get in this state.
Around (few nautical miles) was not other with device like this... :-(
So please gi'me som instruction what I can to do?
I can download or recieve files. maybe is possible to recieve an image of Gold card unbricker? or something that allow to load from SD card or USB?
Write to me here or PM or on my e-mail.
malintzin said:
Hi, dsixda!
Bro' I'm in trouble...
The device was in tricolor bootloader.
Untill i work with your onix 4.0 was OK! but I decide to go back. So I get in this state.
Around (few nautical miles) was not other with device like this... :-(
So please gi'me som instruction what I can to do?
I can download or recieve files. maybe is possible to recieve an image of Gold card unbricker? or something that allow to load from SD card or USB?
Write to me here or PM or on my e-mail.
Click to expand...
Click to collapse
Why are you posting something off-topic here?
Post in the Onyx thread and mention your SPL/IPL.
sandman01 said:
Hi!
I testet the new diagnostic File, and now I can change the Color ID.
Black and Green are available.
Black change the MID to ELF030000
Green change the MID to ELF030001
The original MID can't be restored!?!?!?! (it was ELF030050)
Maybe there are more Versions of the diagnostic tool which change the device into other colors.
Click to expand...
Click to collapse
Really? I'm still at ELF010150 (I ran device_info.bat).. What does device_Info.bat say for you?
I dumped the USB port. (SnoopyPro + mtty)
There is also the change from ELF030050 to ELF030000
sandman01 said:
I dumped the USB port. (SnoopyPro + mtty)
There is also the change from ELF030050 to ELF030000
Click to expand...
Click to collapse
That's pretty cool.
Are there any shipped ROMs with this Model ID (so that you can use Gold Card)?
As title says..
Can someone help? I tried running the Hard USPL Unlocker, if that's what it's called.
It didn't work
And for some reason, after I hard reset it, It doesn't go past the calibration screen..
Help?
Thanks in advance, cheers!
what was your method of flashing it? was it through the PC or SD Card?
XERO_Racer said:
what was your method of flashing it? was it through the PC or SD Card?
Click to expand...
Click to collapse
I got the screen to align now.
I use usb through my computer.
It goes to the loading bar, stays at 0%, and doesn't do anything..
I tried to run RUU to unlock it, still no good.
Help? thanks
rossle12 said:
I got the screen to align now.
I use usb through my computer.
It goes to the loading bar, stays at 0%, and doesn't do anything..
I tried to run RUU to unlock it, still no good.
Help? thanks
Click to expand...
Click to collapse
you can still access the phone? well try to redownload it and try again
http://forum.xda-developers.com/attachment.php?attachmentid=108649&d=1219714334
Thanks!
That worked
If I have anymore problems I'll post it.
Is it possible for me to upgrade to 6.5 from 6.1 now?
Just wondering,
Again, Thanks!
rossle12 said:
Thanks!
That worked
If I have anymore problems I'll post it.
Is it possible for me to upgrade to 6.5 from 6.1 now?
Just wondering,
Again, Thanks!
Click to expand...
Click to collapse
u meant downgrade? if i were you id stick to 6.5 its very stable and fast
and no problem, just post if theres anything wrong with it
I think he meant to 6.5, anyways, if you got the HardSPL to flash, you're good to go with trying out the plentiful 6.5 roms. You don't need 6.1 to do it really.
SDreamer said:
I think he meant to 6.5, anyways, if you got the HardSPL to flash, you're good to go with trying out the plentiful 6.5 roms. You don't need 6.1 to do it really.
Click to expand...
Click to collapse
Thanks
It's working beautifully.