As title says..
Can someone help? I tried running the Hard USPL Unlocker, if that's what it's called.
It didn't work
And for some reason, after I hard reset it, It doesn't go past the calibration screen..
Help?
Thanks in advance, cheers!
what was your method of flashing it? was it through the PC or SD Card?
XERO_Racer said:
what was your method of flashing it? was it through the PC or SD Card?
Click to expand...
Click to collapse
I got the screen to align now.
I use usb through my computer.
It goes to the loading bar, stays at 0%, and doesn't do anything..
I tried to run RUU to unlock it, still no good.
Help? thanks
rossle12 said:
I got the screen to align now.
I use usb through my computer.
It goes to the loading bar, stays at 0%, and doesn't do anything..
I tried to run RUU to unlock it, still no good.
Help? thanks
Click to expand...
Click to collapse
you can still access the phone? well try to redownload it and try again
http://forum.xda-developers.com/attachment.php?attachmentid=108649&d=1219714334
Thanks!
That worked
If I have anymore problems I'll post it.
Is it possible for me to upgrade to 6.5 from 6.1 now?
Just wondering,
Again, Thanks!
rossle12 said:
Thanks!
That worked
If I have anymore problems I'll post it.
Is it possible for me to upgrade to 6.5 from 6.1 now?
Just wondering,
Again, Thanks!
Click to expand...
Click to collapse
u meant downgrade? if i were you id stick to 6.5 its very stable and fast
and no problem, just post if theres anything wrong with it
I think he meant to 6.5, anyways, if you got the HardSPL to flash, you're good to go with trying out the plentiful 6.5 roms. You don't need 6.1 to do it really.
SDreamer said:
I think he meant to 6.5, anyways, if you got the HardSPL to flash, you're good to go with trying out the plentiful 6.5 roms. You don't need 6.1 to do it really.
Click to expand...
Click to collapse
Thanks
It's working beautifully.
Related
i have downloaded the tnt cab file & coppied them to windows is that correct or were must i place the to install ?
??? You must click on the cabs to install it in WMobile.
have tried (setup in cabs)
jacknjill said:
??? You must click on the cabs to install it in WMobile.
Click to expand...
Click to collapse
the cab shows it is installed but the program dose not run.
The Cabs...
Try Copying the cabs in my documents folder. and afer that , go using the file manager and run them. that should work
did you reboot?
i have just done that bet still the same have softreset & booted again but no programs.
Robertnam said:
am i stupid or what
Click to expand...
Click to collapse
I was going to go with "what", but after carefully considering your question, and reading your comments, I think I have to go with "stupid".
Wait a seccond... There are cab files for roms these days? When did this happen and why wasn't I informed? lol
dharvey4651 said:
Wait a seccond... There are cab files for roms these days? When did this happen and why wasn't I informed? lol
Click to expand...
Click to collapse
This really is the key isn't it? I think the OP is trying to execute the upgrade program from his phone.
To the OP you must run the upgrade from a Windows PC.
Kirby
rkwhyte2 said:
This really is the key isn't it? I think the OP is trying to execute the upgrade program from his phone.
To the OP you must run the upgrade from a Windows PC.
Kirby[/QUOTE
I cannot use ActiveSync (any version) to upgrade my MDA. I have been all over this site and other sites. I have tried everything to get ActiveSync to work and connect to my phone. I have had a lot of people on this forum trying to get me operational. No Luck.
So, can I donwload a CAB file to upgrade my Phone ISP/SPL and OS to my MDA SD card and then install from the SD Card like I do other apps?
I believe the answer is no based on this thread. But, I will not give up hope.
Thank you in advance.
ISP/SPL 2.26
Radio 2.25.11
OS WxtROM 2.26.10.2
MSW CE 5.1.195
Click to expand...
Click to collapse
asctony said:
rkwhyte2 said:
This really is the key isn't it? I think the OP is trying to execute the upgrade program from his phone.
To the OP you must run the upgrade from a Windows PC.
Kirby[/QUOTE
I cannot use ActiveSync (any version) to upgrade my MDA. I have been all over this site and other sites. I have tried everything to get ActiveSync to work and connect to my phone. I have had a lot of people on this forum trying to get me operational. No Luck.
So, can I donwload a CAB file to upgrade my Phone ISP/SPL and OS to my MDA SD card and then install from the SD Card like I do other apps?
I believe the answer is no based on this thread. But, I will not give up hope.
Thank you in advance.
ISP/SPL 2.26
Radio 2.25.11
OS WxtROM 2.26.10.2
MSW CE 5.1.195
Click to expand...
Click to collapse
maybe i missed it but have you tried forcing your phone into bootloader and loading a new rom. will your usb not work or do you not have access to a computer with activesync???
Click to expand...
Click to collapse
neva dinova said:
asctony said:
maybe i missed it but have you tried forcing your phone into bootloader and loading a new rom.
No, I have not tried forcing my MDA into bootlader and loading a new rom. Not sure what to do?
will your usb not work or do you not have access to a computer with activesync???
Click to expand...
Click to collapse
My 4 PCs recognize the MDA as a Windows Mobile device, but AS will not connect.
Have uninstalled and reinstalled all versions of AS from 4.1 - 4.5.
Thanks for your input and time. I do appreciate it.
Click to expand...
Click to collapse
swingheim said:
I was going to go with "what", but after carefully considering your question, and reading your comments, I think I have to go with "stupid".
Click to expand...
Click to collapse
I'll go with "stupid" too
oscarillo said:
I'll go with "stupid" too
Click to expand...
Click to collapse
Please guys, I am asking nicely now. This is not a place to insult other people.
Just answer questions if you know the answer or don't bother at all if you don't want to help.
NOTES :
In order to upgrade a ROM, you'll need a PC with ActiveSync installed and an USB cable to connect them
There is the possibility to flash from SD card but that is only in emergency cases, and it's not recommended. Plus i don't know if it will work unless the SD Image isn't your own.
I have the new Hard SPL installed and when I try to install the Dutty 1.1 it's reseting my device and show likes it going to update and it just sits there at 0%. After that it says stuff about recovery and I do all that, and get everything back to normal again. Last I try the update agian and stuff get the same thing over and over.
Has NE1 ran into this problem at all?
I had the same due the fact that I had not run hardspl before installing the ROM.
A matter of "READ THE MANUAL"!
did u get it fixed? i installed the hard spl thou..
Also I tried installing a different one now and I get the same problem?? what is going on?
masta7100 said:
did u get it fixed? i installed the hard spl thou..
Also I tried installing a different one now and I get the same problem?? what is going on?
Click to expand...
Click to collapse
I got it working now.. i feel like an idiot
masta7100 said:
I got it working now.. i feel like an idiot
Click to expand...
Click to collapse
I felt the same.
The good thing is that you fixed it!
robix said:
I had the same due the fact that I had not run hardspl before installing the ROM.
A matter of "READ THE MANUAL"!
Click to expand...
Click to collapse
As my dad always told me.
RTFM (Read the f*%$#[email protected] Manual)
Can you guys tell me which version of hardSPL you used? When i try using kaiser-HardSPLv1 and also Kiaser-HardSPL-3.28 and both fail to install. Where am i going wrong?? Thanks in advance for anyone's assistance.
_____________
ATT Tilt
GSM... Unlocked
KAIS1*0
SPL-3.56.000
CPLD-8
WM 6.1(CE OS 5.2.19214)
ROM:3.57.502.2 WWE
Radio:1.65.21.18
givantake said:
Can you guys tell me which version of hardSPL you used? When i try using kaiser-HardSPLv1 and also Kiaser-HardSPL-3.28 and both fail to install. Where am i going wrong?? Thanks in advance for anyone's assistance.
_____________
ATT Tilt
GSM... Unlocked
KAIS1*0
SPL-3.56.000
CPLD-8
WM 6.1(CE OS 5.2.19214)
ROM:3.57.502.2 WWE
Radio:1.65.21.18
Click to expand...
Click to collapse
Install hard SPL 3.* exactly as in post #2 of this thread: http://forum.xda-developers.com/showthread.php?t=396922
If the first method doesn't work, try the second one.
Thanks
Dave
such a dunce i am
thank you SIR, soo kind, soo kind! i could kick myself in the tosh for not reading through the instructions. Thanks again!
I can not activesync. I am running windows vista 32bit on my pc. I installed ROM DK1 Final and activesync worked fine. To reset some setting i decided to hard reset my device. Since the hard reset I could not activesync again My pc says device unkonwn (a device attached has malfunctioned). I hard reset again and still not working.
I dont think it has anything to do with being on vista because ive synced with other dk roms including this one... However i just tried to use pocket mechanic to fat32 format my sd card and it says "error... a device attached to the system is not functioning" ... Have i bricked my phone????
I cant even SD flash the new ROM from bootloader with a clean fat32 formatted card
Lol, if you can use the phone, then you haven't bricked it. See if this works, go to start>settings>connections>usb to pc and disable that.
Have you rebooted your PC ???????
kareem9nba said:
Lol, if you can use the phone, then you haven't bricked it. See if this works, go to start>settings>connections>usb to pc and disable that.
Click to expand...
Click to collapse
LOL... ok im trying everything right now... rebooted PC... and did another hard reset to phone but says device is not functioning WTF...
You are using WMDC instead of AS correct?
Oh yeah kareem i was really diggin ur rom i installed yesterday while i was trying out the different roms did you get the bugs workd out... ur rom offers the most progs and apps included like opera and stuff and i wanna go back to it... but gotta get this problem workd out first
kareem9nba said:
You are using WMDC instead of AS correct?
Click to expand...
Click to collapse
yeah everything is up to date this just started after i did a hard reset
phantomy2g said:
I can not activesync. I am running windows vista 32bit on my pc. I installed ROM DK1 Final and activesync worked fine. To reset some setting i decided to hard reset my device. Since the hard reset I could not activesync again My pc says device unkonwn (a device attached has malfunctioned). I hard reset again and still not working.
I dont think it has anything to do with being on vista because ive synced with other dk roms including this one... However i just tried to use pocket mechanic to fat32 format my sd card and it says "error... a device attached to the system is not functioning" ... Have i bricked my phone????
Click to expand...
Click to collapse
Please don't do things like this. You are already getting help in two other threads. You don't need to start a new thread for this issue. It's not even a Rom DEVELOPMENT issue. This isn't the "troubleshooting all kaiser issues" thread. You posted correctly the first time, and should have left it there
Hi, Had the same with this rom, just keep on trying to connect, did you also remove the battery and perform a soft reset? I flashed another rom and everything is perfect again. I could not find anything wrong but it took me some time to solve this....
phantomy2g said:
Oh yeah kareem i was really diggin ur rom i installed yesterday while i was trying out the different roms did you get the bugs workd out... ur rom offers the most progs and apps included like opera and stuff and i wanna go back to it... but gotta get this problem workd out first
Click to expand...
Click to collapse
Which bugs?
skatdawg said:
Please don't do things like this. You are already getting help in two other threads. You don't need to start a new thread for this issue. It's not even a Rom DEVELOPMENT issue. This isn't the "troubleshooting all kaiser issues" thread. You posted correctly the first time, and should have left it there
Click to expand...
Click to collapse
My bad man but this is really frustrating as ive been on it for the last 5 hours and trying several methods
kareem9nba said:
Which bugs?
Click to expand...
Click to collapse
I read something somewhere about something resetting
Does anyone still use this? i used it for my HD7 a while back before any of the updates came out and it worked fine, but now i have a trophy and it wont work, i have done everything right according to all the tutorials and from what i remember from last time.
So what the story anyone i just want to edit some reg settings and side load some apps, how hard can it be
CdTDroiD said:
Does anyone still use this? i used it for my HD7 a while back before any of the updates came out and it worked fine, but now i have a trophy and it wont work, i have done everything right according to all the tutorials and from what i remember from last time.
So what the story anyone i just want to edit some reg settings and side load some apps, how hard can it be
Click to expand...
Click to collapse
You need to downgrade to 7004 or 7008 rom.
Thanks dude, worked. hope it stays unlocked. I applied the stay unlock tricks but a bit hesitant to update again. have you?
CdTDroiD said:
Thanks dude, worked. hope it stays unlocked. I applied the stay unlock tricks but a bit hesitant to update again. have you?
Click to expand...
Click to collapse
Hello m8..
If you apply the trick to stay unlocked then it will stay that way...
After the trick i had 3 updates (7008-7390-7392) in my trophy and its still unlocked...
colossus_r said:
Hello m8..
If you apply the trick to stay unlocked then it will stay that way...
After the trick i had 3 updates (7008-7390-7392) in my trophy and its still unlocked...
Click to expand...
Click to collapse
Thanks bud, just to double check what "stay locked" trick did you use, so i use the same one
I have unlocked WP7 phone, but I do not see nothing in Windows Explorer (win7).
I have tried many ways, but still nothing!
Can anybody give some advice how add maps?
Dizaster said:
I have unlocked WP7 phone, but I do not see nothing in Windows Explorer (win7).
I have tried many ways, but still nothing!
Can anybody give some advice how add maps?
Click to expand...
Click to collapse
Add maps? What do you mean? Maps are downloaded from the internet when you use map apps.
Hi. I have HTC Kaiser. I tried to update it's ROM from WM 6.1 to 6.5. But it seems I used wrong file. Updating ROM just went in a sec and after that my HTC doesn't start. After pushing power button just first screen comes (in the bottom right corner with some code like R.B.G) and that's it.
Please anyone who had met with this kind of situation, help me.
Thank you very much in advance,
jeyhun.mirzayev said:
Hi. I have HTC Kaiser. I tried to update it's ROM from WM 6.1 to 6.5. But it seems I used wrong file. Updating ROM just went in a sec and after that my HTC doesn't start. After pushing power button just first screen comes (in the bottom right corner with some code like R.B.G) and that's it.
Please anyone who had met with this kind of situation, help me.
Thank you very much in advance,
Click to expand...
Click to collapse
try reinstalling. from what you are saying, I think that there is no OS in it. also check if your SPL is recent
HTC Kaiser ROM update
mfsr98 said:
try reinstalling. from what you are saying, I think that there is no OS in it. also check if your SPL is recent
Click to expand...
Click to collapse
Dear friend,
I am trying to connect my phone and reinstall but unfortunately no USB connection is coming up between phone and pc. What can I do then. Thanks in advance,
jeyhun.mirzayev said:
Dear friend,
I am trying to connect my phone and reinstall but unfortunately no USB connection is coming up between phone and pc. What can I do then. Thanks in advance,
Click to expand...
Click to collapse
but did you install the ROM or not? do you mean in bootloader mode?