I can not activesync. I am running windows vista 32bit on my pc. I installed ROM DK1 Final and activesync worked fine. To reset some setting i decided to hard reset my device. Since the hard reset I could not activesync again My pc says device unkonwn (a device attached has malfunctioned). I hard reset again and still not working.
I dont think it has anything to do with being on vista because ive synced with other dk roms including this one... However i just tried to use pocket mechanic to fat32 format my sd card and it says "error... a device attached to the system is not functioning" ... Have i bricked my phone????
I cant even SD flash the new ROM from bootloader with a clean fat32 formatted card
Lol, if you can use the phone, then you haven't bricked it. See if this works, go to start>settings>connections>usb to pc and disable that.
Have you rebooted your PC ???????
kareem9nba said:
Lol, if you can use the phone, then you haven't bricked it. See if this works, go to start>settings>connections>usb to pc and disable that.
Click to expand...
Click to collapse
LOL... ok im trying everything right now... rebooted PC... and did another hard reset to phone but says device is not functioning WTF...
You are using WMDC instead of AS correct?
Oh yeah kareem i was really diggin ur rom i installed yesterday while i was trying out the different roms did you get the bugs workd out... ur rom offers the most progs and apps included like opera and stuff and i wanna go back to it... but gotta get this problem workd out first
kareem9nba said:
You are using WMDC instead of AS correct?
Click to expand...
Click to collapse
yeah everything is up to date this just started after i did a hard reset
phantomy2g said:
I can not activesync. I am running windows vista 32bit on my pc. I installed ROM DK1 Final and activesync worked fine. To reset some setting i decided to hard reset my device. Since the hard reset I could not activesync again My pc says device unkonwn (a device attached has malfunctioned). I hard reset again and still not working.
I dont think it has anything to do with being on vista because ive synced with other dk roms including this one... However i just tried to use pocket mechanic to fat32 format my sd card and it says "error... a device attached to the system is not functioning" ... Have i bricked my phone????
Click to expand...
Click to collapse
Please don't do things like this. You are already getting help in two other threads. You don't need to start a new thread for this issue. It's not even a Rom DEVELOPMENT issue. This isn't the "troubleshooting all kaiser issues" thread. You posted correctly the first time, and should have left it there
Hi, Had the same with this rom, just keep on trying to connect, did you also remove the battery and perform a soft reset? I flashed another rom and everything is perfect again. I could not find anything wrong but it took me some time to solve this....
phantomy2g said:
Oh yeah kareem i was really diggin ur rom i installed yesterday while i was trying out the different roms did you get the bugs workd out... ur rom offers the most progs and apps included like opera and stuff and i wanna go back to it... but gotta get this problem workd out first
Click to expand...
Click to collapse
Which bugs?
skatdawg said:
Please don't do things like this. You are already getting help in two other threads. You don't need to start a new thread for this issue. It's not even a Rom DEVELOPMENT issue. This isn't the "troubleshooting all kaiser issues" thread. You posted correctly the first time, and should have left it there
Click to expand...
Click to collapse
My bad man but this is really frustrating as ive been on it for the last 5 hours and trying several methods
kareem9nba said:
Which bugs?
Click to expand...
Click to collapse
I read something somewhere about something resetting
Related
i have downloaded the tnt cab file & coppied them to windows is that correct or were must i place the to install ?
??? You must click on the cabs to install it in WMobile.
have tried (setup in cabs)
jacknjill said:
??? You must click on the cabs to install it in WMobile.
Click to expand...
Click to collapse
the cab shows it is installed but the program dose not run.
The Cabs...
Try Copying the cabs in my documents folder. and afer that , go using the file manager and run them. that should work
did you reboot?
i have just done that bet still the same have softreset & booted again but no programs.
Robertnam said:
am i stupid or what
Click to expand...
Click to collapse
I was going to go with "what", but after carefully considering your question, and reading your comments, I think I have to go with "stupid".
Wait a seccond... There are cab files for roms these days? When did this happen and why wasn't I informed? lol
dharvey4651 said:
Wait a seccond... There are cab files for roms these days? When did this happen and why wasn't I informed? lol
Click to expand...
Click to collapse
This really is the key isn't it? I think the OP is trying to execute the upgrade program from his phone.
To the OP you must run the upgrade from a Windows PC.
Kirby
rkwhyte2 said:
This really is the key isn't it? I think the OP is trying to execute the upgrade program from his phone.
To the OP you must run the upgrade from a Windows PC.
Kirby[/QUOTE
I cannot use ActiveSync (any version) to upgrade my MDA. I have been all over this site and other sites. I have tried everything to get ActiveSync to work and connect to my phone. I have had a lot of people on this forum trying to get me operational. No Luck.
So, can I donwload a CAB file to upgrade my Phone ISP/SPL and OS to my MDA SD card and then install from the SD Card like I do other apps?
I believe the answer is no based on this thread. But, I will not give up hope.
Thank you in advance.
ISP/SPL 2.26
Radio 2.25.11
OS WxtROM 2.26.10.2
MSW CE 5.1.195
Click to expand...
Click to collapse
asctony said:
rkwhyte2 said:
This really is the key isn't it? I think the OP is trying to execute the upgrade program from his phone.
To the OP you must run the upgrade from a Windows PC.
Kirby[/QUOTE
I cannot use ActiveSync (any version) to upgrade my MDA. I have been all over this site and other sites. I have tried everything to get ActiveSync to work and connect to my phone. I have had a lot of people on this forum trying to get me operational. No Luck.
So, can I donwload a CAB file to upgrade my Phone ISP/SPL and OS to my MDA SD card and then install from the SD Card like I do other apps?
I believe the answer is no based on this thread. But, I will not give up hope.
Thank you in advance.
ISP/SPL 2.26
Radio 2.25.11
OS WxtROM 2.26.10.2
MSW CE 5.1.195
Click to expand...
Click to collapse
maybe i missed it but have you tried forcing your phone into bootloader and loading a new rom. will your usb not work or do you not have access to a computer with activesync???
Click to expand...
Click to collapse
neva dinova said:
asctony said:
maybe i missed it but have you tried forcing your phone into bootloader and loading a new rom.
No, I have not tried forcing my MDA into bootlader and loading a new rom. Not sure what to do?
will your usb not work or do you not have access to a computer with activesync???
Click to expand...
Click to collapse
My 4 PCs recognize the MDA as a Windows Mobile device, but AS will not connect.
Have uninstalled and reinstalled all versions of AS from 4.1 - 4.5.
Thanks for your input and time. I do appreciate it.
Click to expand...
Click to collapse
swingheim said:
I was going to go with "what", but after carefully considering your question, and reading your comments, I think I have to go with "stupid".
Click to expand...
Click to collapse
I'll go with "stupid" too
oscarillo said:
I'll go with "stupid" too
Click to expand...
Click to collapse
Please guys, I am asking nicely now. This is not a place to insult other people.
Just answer questions if you know the answer or don't bother at all if you don't want to help.
NOTES :
In order to upgrade a ROM, you'll need a PC with ActiveSync installed and an USB cable to connect them
There is the possibility to flash from SD card but that is only in emergency cases, and it's not recommended. Plus i don't know if it will work unless the SD Image isn't your own.
Just bought my HTC Touch Pro and downloaded HardSPL that is unsigned from the ROM's forum, also read the noob thread about flashing...
Connected my phone trough active sync on the computer, synced all my contacts, then when i tried to run the HardSPL it found witch rom my phone hads roght now and everything but just when it is about to start the installation process it says that it cant connect to my phone, but i have active sync running and it is connected and everything...
What's wrong?
Think you have the wrong version.^Search for RaphaelHardSPL-Unsigned_1_90_3.zip
That worked fine for me...
Greetz
Boris
borisku said:
Think you have the wrong version.^Search for RaphaelHardSPL-Unsigned_1_90_3.zip
That worked fine for me...
Greetz
Boris
Click to expand...
Click to collapse
RaphaelHardSPL-Unsigned_190_1_3 is exactly the one i have so i dont understand what im doing wrong.
borisku said:
Think you have the wrong version.^Search for RaphaelHardSPL-Unsigned_1_90_3.zip
That worked fine for me...
Greetz
Boris
Click to expand...
Click to collapse
Never mind Soloved it by just copying over SSPLManual and running it on the phone and then started the hardSPL installation and all went perfect
Hi guys!!
I'm really desperate.
Today I installed copilot 8, after a while the phone when goes in standby doesn't wake up anymore. When I press the menu button it remains down.
So I tried to reflash myhero 1.1.2 but in vain, and if I try to wipe I get the boot loop on hero logo.
The rotation doesn't work.
Please help me!!!!
Format your ext partition, wipe and flash again.
I use copilot 8 and the same ROM and I haven't that kind of issues on the full version of myhero v1.1.2! On a previous version on the 2.6.29 kernel when never I closed the copilot 8 the system crashed. Then I flashed the red's HTC kernel 2.6.27 and the issue never happened to me again. On this new version, the GPS is working fine for me! I just installed a fresh and clean ROM..
Do you deleted the save folder on the copilot 8, before re-installing the app or it was a fresh install? Is mandatory whenever you re-install the app.
When you install it, be sure you don't have this folder, no matter what is the situation!
Edit: I didn't read the second part of your issue.. Evil is right.. no other solution
It was the first install!
It can be a kernel problem?
Evil, when I try to wipe it goes in loop with the hero logo, do you think that formatting will work?
eViL D: said:
Format your ext partition, wipe and flash again.
Click to expand...
Click to collapse
I did it!
I also tried to change kernel with the three different versions but the problem is still alive!!!
Something new?
daeron666 said:
Something new?
Click to expand...
Click to collapse
I had this prob too.. after my micr sd card was set as damaged by the android sys and i wasn't able to start the device as well. But, the device was able to boot without the microsd card. Try it too. If so backup the information in your pc and format and remove the partitions of the microsd card (if you didn't do it before)!
I tried it, but the bug remains, I think it's something in the OS...
daeron666 said:
I tried it, but the bug remains, I think it's something in the OS...
Click to expand...
Click to collapse
My friend, the best solution is really to try it..install other rom, just for testing! ,,at least to have something to work on it.. step by step.. I use the same ROM, the newest version of copilot (and I previously was with olders ones without prob too), swapper, overclock, 2.6.29 red's kernel (without BFS), Engineered SPL, no radio changes, bla bla..
Gives a description of what is the state of your gear..
I already started to think that it can happen that some piece of hardware on the device is broken, but lets see.. no false alarms,,
Let's try to understand the status!
Of course! I have a 32a with no radio update, engineering spl 2010 and .29 kernel bfs. I Aldo tried without bfs but in vain.
The last thing left to do is trying another ROM....but there's a low level formatting method?
daeron666 said:
Of course! I have a 32a with no radio update, engineering spl 2010 and .29 kernel bfs. I Aldo tried without bfs but in vain.
The last thing left to do is trying another ROM....but there's a low level formatting method?
Click to expand...
Click to collapse
If there is, it was never spoken here.. the only way I see the internal phone partitions formating is when applying a new room...
Remove the sdcard/copilot directory and reinstall copilot
OR
Format your SDcard and reinstall copilot
Amon_RA said:
Remove the sdcard/copilot directory and reinstall copilot
OR
Format your SDcard and reinstall copilot
Click to expand...
Click to collapse
My friend, I think he tried that!
ricardomega said:
My friend, I think he tried that!
Click to expand...
Click to collapse
Yes of course, I tried that!
I also tried several roms, but nothing changes!
What can I do?
I'm really desperate.
daeron666 said:
Yes of course, I tried that!
I also tried several roms, but nothing changes!
What can I do?
I'm really desperate.
Click to expand...
Click to collapse
But without the copilot no issues, right? I'm using the copilot v8.0.0.328 kfc3.0 and you??
Excuse me, I'll explain better:
The problem is ALWAYS, with or without copilot, with or without sd...
daeron666 said:
Excuse me, I'll explain better:
The problem is ALWAYS, with or without copilot, with or without sd...
Click to expand...
Click to collapse
No need for excuses.. Man, "just" in my opinion.. you might have some broken hardware on your device.. I can't find any other answer. Flash back everything original like it should be and send it to warranty. There's SPL collections, there's original ROM's from HTC, etc etc..
I'm sorry.. I'm unable to help you.. Maybe someone has other idea, or something, but in opinion you a broken device..
As title says..
Can someone help? I tried running the Hard USPL Unlocker, if that's what it's called.
It didn't work
And for some reason, after I hard reset it, It doesn't go past the calibration screen..
Help?
Thanks in advance, cheers!
what was your method of flashing it? was it through the PC or SD Card?
XERO_Racer said:
what was your method of flashing it? was it through the PC or SD Card?
Click to expand...
Click to collapse
I got the screen to align now.
I use usb through my computer.
It goes to the loading bar, stays at 0%, and doesn't do anything..
I tried to run RUU to unlock it, still no good.
Help? thanks
rossle12 said:
I got the screen to align now.
I use usb through my computer.
It goes to the loading bar, stays at 0%, and doesn't do anything..
I tried to run RUU to unlock it, still no good.
Help? thanks
Click to expand...
Click to collapse
you can still access the phone? well try to redownload it and try again
http://forum.xda-developers.com/attachment.php?attachmentid=108649&d=1219714334
Thanks!
That worked
If I have anymore problems I'll post it.
Is it possible for me to upgrade to 6.5 from 6.1 now?
Just wondering,
Again, Thanks!
rossle12 said:
Thanks!
That worked
If I have anymore problems I'll post it.
Is it possible for me to upgrade to 6.5 from 6.1 now?
Just wondering,
Again, Thanks!
Click to expand...
Click to collapse
u meant downgrade? if i were you id stick to 6.5 its very stable and fast
and no problem, just post if theres anything wrong with it
I think he meant to 6.5, anyways, if you got the HardSPL to flash, you're good to go with trying out the plentiful 6.5 roms. You don't need 6.1 to do it really.
SDreamer said:
I think he meant to 6.5, anyways, if you got the HardSPL to flash, you're good to go with trying out the plentiful 6.5 roms. You don't need 6.1 to do it really.
Click to expand...
Click to collapse
Thanks
It's working beautifully.
Sorry for double posting, but in general section, no one could answer...
I had a p920 (or su760.. how can I tell?) it was on an Acura rom... and nothing could be done on it anymore... flashing with smartflash, flashtool from fastboot, cwm, download mode etc... nothing.
Every procedure (under windows 7 64 and also on linux amd64) went right, no errors, no warnings... but after restart... everything was exactly as before. The flash had no effect on it.
Even if I wrote some files on the internal sd card, I could read them back, everything seem ok,however, after restart the device... everything disappeared..
Some hints? Did anyone have similar problems?
Thank u very much, have a nice day..
Happy holidays
gepdiana said:
Sorry for double posting, but in general section, no one could answer...
I had a p920 (or su760.. how can I tell?) it was on an Acura rom... and nothing could be done on it anymore... flashing with smartflash, flashtool from fastboot, cwm, download mode etc... nothing.
Every procedure (under windows 7 64 and also on linux amd64) went right, no errors, no warnings... but after restart... everything was exactly as before. The flash had no effect on it.
Even if I wrote some files on the internal sd card, I could read them back, everything seem ok,however, after restart the device... everything disappeared..
Some hints? Did anyone have similar problems?
Thank u very much, have a nice day..
Happy holidays
Click to expand...
Click to collapse
go to http://forum.xda-developers.com/showthread.php?t=2337545
step by step
GrMo Hady said:
go to http://forum.xda-developers.com/showthread.php?t=2337545
step by step
Click to expand...
Click to collapse
Thank u very much!! This is the first and only one answer I got so far...!!
To be honest I think I've already tried that... the problem is that every procedure I tried, completes succesfully even if in the end, nothing changed... do u really think that can solve it?
Thank u, marry chritmas and happy new year!