Just bought my HTC Touch Pro and downloaded HardSPL that is unsigned from the ROM's forum, also read the noob thread about flashing...
Connected my phone trough active sync on the computer, synced all my contacts, then when i tried to run the HardSPL it found witch rom my phone hads roght now and everything but just when it is about to start the installation process it says that it cant connect to my phone, but i have active sync running and it is connected and everything...
What's wrong?
Think you have the wrong version.^Search for RaphaelHardSPL-Unsigned_1_90_3.zip
That worked fine for me...
Greetz
Boris
borisku said:
Think you have the wrong version.^Search for RaphaelHardSPL-Unsigned_1_90_3.zip
That worked fine for me...
Greetz
Boris
Click to expand...
Click to collapse
RaphaelHardSPL-Unsigned_190_1_3 is exactly the one i have so i dont understand what im doing wrong.
borisku said:
Think you have the wrong version.^Search for RaphaelHardSPL-Unsigned_1_90_3.zip
That worked fine for me...
Greetz
Boris
Click to expand...
Click to collapse
Never mind Soloved it by just copying over SSPLManual and running it on the phone and then started the hardSPL installation and all went perfect
Related
i have downloaded the tnt cab file & coppied them to windows is that correct or were must i place the to install ?
??? You must click on the cabs to install it in WMobile.
have tried (setup in cabs)
jacknjill said:
??? You must click on the cabs to install it in WMobile.
Click to expand...
Click to collapse
the cab shows it is installed but the program dose not run.
The Cabs...
Try Copying the cabs in my documents folder. and afer that , go using the file manager and run them. that should work
did you reboot?
i have just done that bet still the same have softreset & booted again but no programs.
Robertnam said:
am i stupid or what
Click to expand...
Click to collapse
I was going to go with "what", but after carefully considering your question, and reading your comments, I think I have to go with "stupid".
Wait a seccond... There are cab files for roms these days? When did this happen and why wasn't I informed? lol
dharvey4651 said:
Wait a seccond... There are cab files for roms these days? When did this happen and why wasn't I informed? lol
Click to expand...
Click to collapse
This really is the key isn't it? I think the OP is trying to execute the upgrade program from his phone.
To the OP you must run the upgrade from a Windows PC.
Kirby
rkwhyte2 said:
This really is the key isn't it? I think the OP is trying to execute the upgrade program from his phone.
To the OP you must run the upgrade from a Windows PC.
Kirby[/QUOTE
I cannot use ActiveSync (any version) to upgrade my MDA. I have been all over this site and other sites. I have tried everything to get ActiveSync to work and connect to my phone. I have had a lot of people on this forum trying to get me operational. No Luck.
So, can I donwload a CAB file to upgrade my Phone ISP/SPL and OS to my MDA SD card and then install from the SD Card like I do other apps?
I believe the answer is no based on this thread. But, I will not give up hope.
Thank you in advance.
ISP/SPL 2.26
Radio 2.25.11
OS WxtROM 2.26.10.2
MSW CE 5.1.195
Click to expand...
Click to collapse
asctony said:
rkwhyte2 said:
This really is the key isn't it? I think the OP is trying to execute the upgrade program from his phone.
To the OP you must run the upgrade from a Windows PC.
Kirby[/QUOTE
I cannot use ActiveSync (any version) to upgrade my MDA. I have been all over this site and other sites. I have tried everything to get ActiveSync to work and connect to my phone. I have had a lot of people on this forum trying to get me operational. No Luck.
So, can I donwload a CAB file to upgrade my Phone ISP/SPL and OS to my MDA SD card and then install from the SD Card like I do other apps?
I believe the answer is no based on this thread. But, I will not give up hope.
Thank you in advance.
ISP/SPL 2.26
Radio 2.25.11
OS WxtROM 2.26.10.2
MSW CE 5.1.195
Click to expand...
Click to collapse
maybe i missed it but have you tried forcing your phone into bootloader and loading a new rom. will your usb not work or do you not have access to a computer with activesync???
Click to expand...
Click to collapse
neva dinova said:
asctony said:
maybe i missed it but have you tried forcing your phone into bootloader and loading a new rom.
No, I have not tried forcing my MDA into bootlader and loading a new rom. Not sure what to do?
will your usb not work or do you not have access to a computer with activesync???
Click to expand...
Click to collapse
My 4 PCs recognize the MDA as a Windows Mobile device, but AS will not connect.
Have uninstalled and reinstalled all versions of AS from 4.1 - 4.5.
Thanks for your input and time. I do appreciate it.
Click to expand...
Click to collapse
swingheim said:
I was going to go with "what", but after carefully considering your question, and reading your comments, I think I have to go with "stupid".
Click to expand...
Click to collapse
I'll go with "stupid" too
oscarillo said:
I'll go with "stupid" too
Click to expand...
Click to collapse
Please guys, I am asking nicely now. This is not a place to insult other people.
Just answer questions if you know the answer or don't bother at all if you don't want to help.
NOTES :
In order to upgrade a ROM, you'll need a PC with ActiveSync installed and an USB cable to connect them
There is the possibility to flash from SD card but that is only in emergency cases, and it's not recommended. Plus i don't know if it will work unless the SD Image isn't your own.
I can not activesync. I am running windows vista 32bit on my pc. I installed ROM DK1 Final and activesync worked fine. To reset some setting i decided to hard reset my device. Since the hard reset I could not activesync again My pc says device unkonwn (a device attached has malfunctioned). I hard reset again and still not working.
I dont think it has anything to do with being on vista because ive synced with other dk roms including this one... However i just tried to use pocket mechanic to fat32 format my sd card and it says "error... a device attached to the system is not functioning" ... Have i bricked my phone????
I cant even SD flash the new ROM from bootloader with a clean fat32 formatted card
Lol, if you can use the phone, then you haven't bricked it. See if this works, go to start>settings>connections>usb to pc and disable that.
Have you rebooted your PC ???????
kareem9nba said:
Lol, if you can use the phone, then you haven't bricked it. See if this works, go to start>settings>connections>usb to pc and disable that.
Click to expand...
Click to collapse
LOL... ok im trying everything right now... rebooted PC... and did another hard reset to phone but says device is not functioning WTF...
You are using WMDC instead of AS correct?
Oh yeah kareem i was really diggin ur rom i installed yesterday while i was trying out the different roms did you get the bugs workd out... ur rom offers the most progs and apps included like opera and stuff and i wanna go back to it... but gotta get this problem workd out first
kareem9nba said:
You are using WMDC instead of AS correct?
Click to expand...
Click to collapse
yeah everything is up to date this just started after i did a hard reset
phantomy2g said:
I can not activesync. I am running windows vista 32bit on my pc. I installed ROM DK1 Final and activesync worked fine. To reset some setting i decided to hard reset my device. Since the hard reset I could not activesync again My pc says device unkonwn (a device attached has malfunctioned). I hard reset again and still not working.
I dont think it has anything to do with being on vista because ive synced with other dk roms including this one... However i just tried to use pocket mechanic to fat32 format my sd card and it says "error... a device attached to the system is not functioning" ... Have i bricked my phone????
Click to expand...
Click to collapse
Please don't do things like this. You are already getting help in two other threads. You don't need to start a new thread for this issue. It's not even a Rom DEVELOPMENT issue. This isn't the "troubleshooting all kaiser issues" thread. You posted correctly the first time, and should have left it there
Hi, Had the same with this rom, just keep on trying to connect, did you also remove the battery and perform a soft reset? I flashed another rom and everything is perfect again. I could not find anything wrong but it took me some time to solve this....
phantomy2g said:
Oh yeah kareem i was really diggin ur rom i installed yesterday while i was trying out the different roms did you get the bugs workd out... ur rom offers the most progs and apps included like opera and stuff and i wanna go back to it... but gotta get this problem workd out first
Click to expand...
Click to collapse
Which bugs?
skatdawg said:
Please don't do things like this. You are already getting help in two other threads. You don't need to start a new thread for this issue. It's not even a Rom DEVELOPMENT issue. This isn't the "troubleshooting all kaiser issues" thread. You posted correctly the first time, and should have left it there
Click to expand...
Click to collapse
My bad man but this is really frustrating as ive been on it for the last 5 hours and trying several methods
kareem9nba said:
Which bugs?
Click to expand...
Click to collapse
I read something somewhere about something resetting
As title says..
Can someone help? I tried running the Hard USPL Unlocker, if that's what it's called.
It didn't work
And for some reason, after I hard reset it, It doesn't go past the calibration screen..
Help?
Thanks in advance, cheers!
what was your method of flashing it? was it through the PC or SD Card?
XERO_Racer said:
what was your method of flashing it? was it through the PC or SD Card?
Click to expand...
Click to collapse
I got the screen to align now.
I use usb through my computer.
It goes to the loading bar, stays at 0%, and doesn't do anything..
I tried to run RUU to unlock it, still no good.
Help? thanks
rossle12 said:
I got the screen to align now.
I use usb through my computer.
It goes to the loading bar, stays at 0%, and doesn't do anything..
I tried to run RUU to unlock it, still no good.
Help? thanks
Click to expand...
Click to collapse
you can still access the phone? well try to redownload it and try again
http://forum.xda-developers.com/attachment.php?attachmentid=108649&d=1219714334
Thanks!
That worked
If I have anymore problems I'll post it.
Is it possible for me to upgrade to 6.5 from 6.1 now?
Just wondering,
Again, Thanks!
rossle12 said:
Thanks!
That worked
If I have anymore problems I'll post it.
Is it possible for me to upgrade to 6.5 from 6.1 now?
Just wondering,
Again, Thanks!
Click to expand...
Click to collapse
u meant downgrade? if i were you id stick to 6.5 its very stable and fast
and no problem, just post if theres anything wrong with it
I think he meant to 6.5, anyways, if you got the HardSPL to flash, you're good to go with trying out the plentiful 6.5 roms. You don't need 6.1 to do it really.
SDreamer said:
I think he meant to 6.5, anyways, if you got the HardSPL to flash, you're good to go with trying out the plentiful 6.5 roms. You don't need 6.1 to do it really.
Click to expand...
Click to collapse
Thanks
It's working beautifully.
got a htc sensation 4g tmobile and ill be using it here in philippines.
just got my lock code and i have it working, i dunno yet the wifi, for i have seems connected but cant connect.(i see im connected but cant even go to internet or even market, do i have to do somthing?)
my question is?
i like to s-off, (i followed ikhzter guide but i cant get past "waiting for devices" i already have checked usb debugging and tried charge only, sync and disk drive. is it that long to detect my device or is it because it has somthing to do with my device coz it came from states and im using it in phil?
can someone pls help me?
ty in advance
my version is 2.3.3
Have you fastboot unchecked also - needs to be unchecked
will give it a try, but is it ok even though my phone is from tmobile?
ty for replying
still the same
waiting for device
kurichichan said:
still the same
waiting for device
Click to expand...
Click to collapse
closed the htc sync. in taskManager. letme know if u still have problems
Did you install the necessary drivers on your PC?
i dont have htc sync installed, i didnt installed it and its not running in my task manager.
what drivers do i have to install? i didnt install anything yet, maybe thats it
got it fully working now, thank you all
Witch driver should i download to install that one ? Ive tried but it says i dont have it even if i point it on LG folder...
I hope your problem will be solved by installing this driver OMAP4430.
download link
csmg.lgmobile.com:9002/swdata/WEBSW/LGP920/AVIVML/20110623_05/OMAPFlashInstaller-4.10(2).zip
Click to expand...
Click to collapse
behruz_godrat said:
I hope your problem will be solved by installing this driver OMAP4430.
download link
Click to expand...
Click to collapse
Why doesnt the link work ? or should i use the shttps metod ?
Edit; Nevermind i downloaded but didnt work to install the drivers, is it only for 32bit?
Link work, but because this forum is limited I could not do it insert complete
You can copy this link in the browser address bar, you will see that
This driver is compatible with versions 32 & 64 bit Windows 7
csmg.lgmobile.com:9002/swdata/WEBSW/LGP920/AVIVML/20110623_05/OMAPFlashInstaller-4.10(2).zip
Click to expand...
Click to collapse
behruz_godrat said:
Link work, but because this forum is limited I could not do it insert complete
You can copy this link in the browser address bar, you will see that
This driver is compatible with versions 32 & 64 bit Windows 7
Click to expand...
Click to collapse
still not working but i found it in another place and tried to install it then rebooted and tried the power+up and when its loading its still fails ons OMAP4430 but i get port 5active on settings but not onLGFlashTool
Dear friend; this error message "fail port 5..." I also appeared!
I by the program "SuperOneClick" unroot got it, again then root mode the phone, back to standard mode
At this time I was able to install the original ROM
behruz_godrat said:
Dear friend; this error message "fail port 5..." I also appeared!
I by the program "SuperOneClick" unroot got it, again then root mode the phone, back to standard mode
At this time I was able to install the original ROM
Click to expand...
Click to collapse
The problems is, i cant do anything with the phone, feels like its brick, the only thing i can go is to "CWM", nothing else, so im tryin to connect my phone to the computer so it can find it and flash the phone with LGFlashTool
Unfortunately, "CWM" Only Samsung phones that are root is applicable, not applicable LG phones!!
Apart from installing flash the boot loader ROM,can update ROM your phone by the program "KDZ" to "B2CAppSetup" applications.
good luck...
behruz_godrat said:
Unfortunately, "CWM" Only Samsung phones that are root is applicable, not applicable LG phones!!
Apart from installing flash the boot loader ROM,can update ROM your phone by the program "KDZ" to "B2CAppSetup" applications.
good luck...
Click to expand...
Click to collapse
Thnx for all time and with all ideas, ive fixed it (i think) i did the power+up (without batteri) then i did put the batteri and the port stayed and then i updated from the B2CAppSetup and now its installing the V21D_00 kdz
Thnx thnx i hope now the phone will boot this time without problems, 20% left until ill see how everything went, thnx again for the time
Edit: worked, thnx again <3 all love to u
hAk0Mi said:
Thnx for all time and with all ideas, ive fixed it (i think) i did the power+up (without batteri) then i did put the batteri and the port stayed and then i updated from the B2CAppSetup and now its installing the V21D_00 kdz
Thnx thnx i hope now the phone will boot this time without problems, 20% left until ill see how everything went, thnx again for the time
Edit: worked, thnx again <3 all love to u
Click to expand...
Click to collapse
The LG phones have the worst case install ROM
I hope it does not break your phone
I'm also happy to talk to you
behruz_godrat said:
The LG phones have the worst case install ROM
I hope it does not break your phone
I'm also happy to talk to you
Click to expand...
Click to collapse
Everything works like normal now, now i got offical firmw and im afraid to put another one, just gonna root it.
Thanks for all your time and nice to talk with u 2
behruz_godrat said:
I hope your problem will be solved by installing this driver OMAP4430.
download link
Click to expand...
Click to collapse
i copied it and paste it on my browser.. i cannot open the link