I tried updating my SPV M2000, the power cable come loose half way through and now all I get on the screen is Serial v2.07 on the screen.
It is dead when connected to the PC.
I am running 64bit Vista.
I have tried everything on this thread to get it working but nothing happens, it just won't connect to the device.
It also won't go into bootloader.
please if you know something that could help me send an email [email protected]
Related
I am having problems with upgrading my xda2 when i put the xda2 onto bootloader mode i get the serial come up and then connect to pc changes to usb the prob occurs when i luanch the progarm for upgrade and i get the probs of the usb words on screen go blank and after a while says the upgarde wasnt possible and the device didnt connect properly coudl you plse help me on the solution to this prob. I have doen upgrades b4
but nothing like this prob has occured before.Thanks in advance
Everytime I connect my PC to the phone via USB cable, I get a message from XP saying,
"USB Device Not Recognized. One of the USB devices attached to this computer has malfunctioned, and Windows does not recognize it."
Activesync never goes green and I can't flash my phone to a more stable ROM. I just got my TILT 2 days ago and really don't want to be stuck with such a slow ROM. I flashed the phone to the HTC AKU bigstorage ROM before this and everything worked fine. It's just when I tried to flash to the AT&T Rom did I run into this problem.
Any help will be much appreciated. Thanks.
Have you tried rebooting your PC?
If rebooting the PC doesn't do it you may need to completely re install activesync itself. Worked for me....
I reinstalled activesync and now it works.
BTW, is there a way to stop Activesync blinking my programs in and out from being selected on my PC?
setting -> connections ->usb to pc -> uncheck a mark. this should help.
the best idea - change rom to htc, faster, more relible, no sync problems.
my uni stuk at boot screen serial v 1.01 the serial word didnot change 2 usb my desktop pc tell me that usb device not recognized i try all method nothing just boot screen
i try more than one usb cable
i charg my battry full
mtty not have usb choise
when i make hardrest the screen give me press 0 or x
i try the UNI_ExitBootloader.exe not working
i change many pc
i try 2 rest an hard reset 1000000 time
when i plug the usb cable in my device whitout battry it flash red
when i plug the usb cable in my device whit battry it not flash
i try all thing not work tell me that my device dead ???????????????????????????????????????????????
pllllllllllllllllllllllllz help 2 make my uni a live
I assume you have read the following 2 links? If not, read them now and follow the instructions very carefully.
http://wiki.xda-developers.com/index.php?pagename=Uni_Stuck_Bootloader_Serial
http://wiki.xda-developers.com/index.php?pagename=Uni_Stuck_Bootloader
I had the same problem as you, and was able to restore my Uni with a new ROM using the second link.
But the first problem is getting your PC to stop displaying "USB device not recognized", unfortunately this is quite difficult and I actually didn't manage to do it with my main PC! I had to use an old laptop with USB 1.1 and only then it worked fine, after installing Activesync 4.5.
Basically the Uni sucks full 500mA out of the USB port, so try unplugging ALL other USB devices from your PC first, and if that doesn't work then you will have to try another PC. Some work better than others, maybe you have an old laptop lying around which has at least USB 1.1, or could use a friends PC?
Don't bother hard resetting any more, in this state you can only do normal reset and enter bootloader mode. You will have to try combinations of this whilst plugging it into the PC, and also try different USB ports. Also try entering bootloader mode whilst the Uni is plugged into PC, and try without and plugging it in after.
If you manage to get the device recognized in device manager, and the display change to USB, then follow the instructions in the Wiki above and your device will be restored.
And make sure to flash a ROM that does not include a new IPL/SPL, that means don't use any network default WM5 ROM!!! I used Tomal's 8.0, I recommend that when flashing to recover your device.
thanxxxxxxxxxxxxxxxxxxxxxxxxx my jasjar back a live thanx every one
yasoo157 said:
thanxxxxxxxxxxxxxxxxxxxxxxxxx my jasjar back a live thanx every one
Click to expand...
Click to collapse
can u tell me how u got ur uni working again im still stuck at the screen where it says press x to restore defaults and 0 to exit????
jasjar died
I have exaclty the same problem with my jasjar. help!!! usb is not working .....and how can I find Tomals 8.0 ......
i upgraded to tomal's rom to give it a try, and it works great, problem is i can't remove the rom....mtty tool doesn't work cause everytime i connect to xp, vista don't matter about 10 cords it always say usb unrecongized and when i do the ruu...i get a error so i was going to try the mtty but i can't even connect the universal to the damn pc, in bootloader it goes from serial to usb when you connect that works, but u see it connect to the pc for like 2 secs then the usb unrecongizeable any help i'm tired of reading all these treads....thanks in advance
bty mtty tool only shows com1 and com2 no usb at all
I found out what it was, i had to go in to safe mode and when i plugged it back in i hurry up and stop the auto update, looked in device manager and there it was *** pocket usb sync **** before i couldn't see it now i followed the post on upgrading using vista no problems thanks!!
Mods
Can delete this thread please?
Hi, i have been restlessly searching XDA and the web for a solution to a problem i have with my HD2 (EU version - o2). I normally flash a new ROM every weeks or so just to keep up to date with the latest ROMs and stuff and its just become a hobby of a sort. I have MAGLDR and flashed with "NexusHD2-Gingerbread_V3.2a_NAND_(Android-2.3.7)". I have been using this ROM for about a week and so now with no problems whatsoever.
The problem i am experiencing now is that i am trying to do a full wipe (task29) using the HD2 toolkit in order to flash a fresh ROM. My USB cable is working perfectly fine and my PC recognises USB when i am booted in Android. But for some reason i get no connection to USB while in boot loader mode. Afer the usual RED BLUE GREEN at the bottom of the screen u get SERIAL when not connected to USB but when i connect it to USB its just blank and not picked up by the PC... Why is this? I dont know, but i sure hope someone can help me out.
Peace
Anyone? Please?