If any 7510 owners can scan their registry, I am searching for any drivers associated with the SSD. Can you help out? This is in relation to trying to upgrade the 7500/7501 to a 16GB SSD.
Keith Walker
Hi Keith,
I take it you're looking for the drivers for the flash storage and that you're working on porting AP4 to x7510?
If not, please could you let us know what else you need?
keithwwalker said:
If any 7510 owners can scan their registry, I am searching for any drivers associated with the SSD. Can you help out? This is in relation to trying to upgrade the 7500/7501 to a 16GB SSD.
Keith Walker
Click to expand...
Click to collapse
just go get one of the x7510 rom images from the x7510 hardspl thread i made (stickied, easy to find) and dump the registry and files.
easiest test might be flash the rom as is, but make sure you got 3.5 SPL and not 1.2.
note, someone tried this already (i've talked to him in PM) and SSD wasn't working. which SSD driver did you install? same as x7510?
Copy text between lines and save as .REG
_______________________________________________________________
[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\SDBusDriver]
"IClass"=multi_sz:"{20FA98A8-B298-4b32-8D72-C716AEE2FA84}=%b","{6F40791D-300E-44E4-BC38-E0E63CA8375C}=%b","",""
"Flags"=dword:00010000
"RequestListDepth"=dword:00000030
"ThreadPriority"=dword:00000064
"Prefix"="SDC"
"Dll"="SDBus.dll"
"Order"=dword:00000015
_______________________________________________________________
I'll see in a while if I can extract SDBus.dll
I guess there might be some sort of race going on here to see who can be 1st to port AP4 to x7510!
Whichever way it goes, if successful we all win.
I am not working on porting AP4 to the 7510, but working on getting the Transcend 16gb SSD recognized in the 7500/7501. I have the 7510 ROM that was modified to work with the 7500/01 but the SSD is not recognized as of yet. I plan to run WM5torage and see if the USB recognizes the SSD.
I don't think that our objectives are mutually exclusive. If the drivers from the 7510 can be extracted to work with the Transcend SSD in the 7500/7501; then surely those drivers can be put into the AP4 ROM.
Thanks for the info so far, fyi, I have SPL3.5
NanoRuler said:
Hi Keith,
I take it you're looking for the drivers for the flash storage and that you're working on porting AP4 to x7510?
If not, please could you let us know what else you need?
Click to expand...
Click to collapse
I ran v1.73 of WM5torage and the SSD is recognized under USB connection.
It is titled WM5torage ATHE400 USB Storage Device. It is not formatted so the capacity still reads 0
Question is how to format it through WinXP or Vista????
If one of you guys has WM5torage, can you hook up your 7510 to your PC and then right click on your SSD?
It should show up as a removable disk. Right click on Properties, then under the Hardware tab, there should be a list of drives.
Click on the ATHE400 device and then hit Properties Button again.
A new window should openand then go to Driver tab.
Tell me what drivers are listed for your SSD once you hit the Driver Details button?
On mine they are:
c:\windows\system32\drivers\disk.sys
c:\windows\system32\drivers\PartMgr.sys
Let me know if you have anything different!
Keith, surely if you can see it under XP or Vista then you can format it? Is anything preventing you from formatting it as a removable storage device?
keithwwalker said:
I have the 7510 ROM that was modified to work with the 7500/01 but the SSD is not recognized as of yet.
Click to expand...
Click to collapse
this is the mistake
flash an *unmodified* x7510 rom from the thread i mentioned, and see if SSD works in that. you can always reflash to x7500 rom to fix the annoyances coming from the ROM not being fully compatible but this is just fine to test the SSD itself.
I will try that Cmonex. But I thought that the ROM would not upload if the device was not an ATHE400. I will try it anyway.
With regard to formatting the SSD under USB connection. The only formatting available under my XP unit at home was FAT12. With FAT12, the SSD only had 78mb, dissappointing.
FAT32 wasn't an option, which was strange.
I sent that SSD back to Transcend, and now have the new one installed.
Does anyone have the link for the std. ROM? I downloaded a zip file, but it is fragmented file with .raw extensions. How to extract?
CMONEX posted a few links here: http://forum.xda-developers.com/showthread.php?t=441684
Well I downloaded the std. 7510 rom and the SSD is still not recognized. I might as well switch to the AP4 ROM and try to format the SSD via USB cable from the host PC.
keithwwalker said:
Well I downloaded the std. 7510 rom and the SSD is still not recognized. I might as well switch to the AP4 ROM and try to format the SSD via USB cable from the host PC.
Click to expand...
Click to collapse
This might be the reason why the drivers don't work:
al-djazair said:
Hi,
as my X7510 had a deadly accident, I dismantled it.
It doesn't have a SSD. The place where X7500 has his MicroDrive is filled by the PCB with on the both sides a total of four SanDisk SDED5-004G-NC 4GB FlashDrive.
This FlashDrive has a FBGA package which need an industrial soldering machine to be soldered or desoldered.
Click to expand...
Click to collapse
Is everyone sure that this is the driver for the SSD? I just uploaded AP4 Platinum (for 7500/7501) and it has the same registry and .dll
NanoRuler said:
Copy text between lines and save as .REG
_______________________________________________________________
[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\SDBusDriver]
"IClass"=multi_sz:"{20FA98A8-B298-4b32-8D72-C716AEE2FA84}=%b","{6F40791D-300E-44E4-BC38-E0E63CA8375C}=%b","",""
"Flags"=dword:00010000
"RequestListDepth"=dword:00000030
"ThreadPriority"=dword:00000064
"Prefix"="SDC"
"Dll"="SDBus.dll"
"Order"=dword:00000015
_______________________________________________________________
I'll see in a while if I can extract SDBus.dll
Click to expand...
Click to collapse
keithwwalker said:
Is everyone sure that this is the driver for the SSD? I just uploaded AP4 Platinum (for 7500/7501) and it has the same registry and .dll
Click to expand...
Click to collapse
the driver is doc0 and doc1 dlls.
but if the ssd did not work under an an unmodified ATHE400 rom, then it will never work with the x7510 driver, sorry
Can anybody create the .CAB file with driver for internal 16 Gb flash-storage of HTC X7510? Please, help!
Dear All Sifus ( Gurus ) of X7501 and x7510 ,
Looks like the this tough hurdle is still around after 2 years now , it is so easy to solve a only hardware problem , also a only software problem , but it is most difficult to solve a problem of both hardware and also software that is associated together , especially when Htc and also ssd manufacturer is keeping mum about the settings . But i think nothing is impossible , so pls quickly solve this puzzle and share with us and dont give up , you are very close already , thanks and regards - jimmunsw
Related
Hello I have big problem with my SDIO Wi-fi card!
I bought Safecom card SDIO for Wlan and I have installed WM 5 1.60b 96 on my Qtek 2020 and card just does not work! The blue signal light just does not blink - as it should! So I baddly needed Wi-fi and I downgraded to WM 2003SE - where the card worked - perfectly. I could pull it out and plug it in with no errors, but here when I instaled drivers it said it were not ment for this tipe of OS - like almost all programs! I turned to manufacturer and they told me it was only for WM 2003 - not even 2003SE!?!
I saw similar post for the problem and it said that they use WM 5 1.6a - but with that version I had alredy have had quite a bit probems with phone operation - it didn't work. Help me please - I just cannot downgreade to WM 2003SE any more - I can't stand OS with non persistent memory, excell with no graphs, poorer graphics, no power point... any more!
PLEASE HELP ME! ANYONE!
I got the safe Safecomm SDIO Wireless B card as you and I am using a XDA2
I have just upgraded from WM2003SE to WM5 with 96MB RAM.... and I have been experiencing the same problem. But I fixed it by downloading and installing the following 2 items:
-Safecom_11b_drivers.rar
-Widcomm fix after install for 1.50
They can be found on:
http://buzzdev.net/component/option,com_remository/Itemid,100/func,select/id,15/
Best Regards,
Sam
The Ambicom WM2005 beta drivers work with the Safecom SDIO wifi card, as they're the same piece of kit.
I'm using it with WM2005 2.01.32WWE from tofclock. Only trouble I have at the moment is that you need to soft-reset the device with the card inserted to start the blue light and activate the card each time you want to use it.....
I haven't yet found a way of making the card work upon insertion without resetting the device.
Have you tried to install the wifi fix?
It is Patch #7 on this page:
http://wiki.xda-developers.com/index.php?pagename=BA_WM5_Patches_ChangeLog
Sandisk Wifi Connection Problem
I got the same problem on my SanDisk WiFi card after upgrading to WM2005 it never work.Can anyone help me to solve this problem?Tried to download those drivers but it never work.
hmm, that's interesting, i am not sure... because mine is a safecom sdio wifi card, and it works fine w/ the drivers
SanDisk Hifi SD Card is down!
jon-jon said:
I got the same problem on my SanDisk WiFi card after upgrading to WM2005 it never work.Can anyone help me to solve this problem?Tried to download those drivers but it never work.
Click to expand...
Click to collapse
Hello
This happened to me too.
First on 2003SE it worked very well, then after install wm5 1.60 stoped working.
I performed a downgrade to 2003se again and not worked as well, another downgrade to wm2003 1.72 official O2 rom and the same never worked anymore.
Does someone know if it is possible that some how wm5 1.60 cause an error inside the card and she died for all rom's?
Re: SanDisk Hifi SD Card is down!
rodinhas said:
jon-jon said:
I got the same problem on my SanDisk WiFi card after upgrading to WM2005 it never work.Can anyone help me to solve this problem?Tried to download those drivers but it never work.
Click to expand...
Click to collapse
Hello
This happened to me too.
First on 2003SE it worked very well, then after install wm5 1.60 stoped working.
I performed a downgrade to 2003se again and not worked as well, another downgrade to wm2003 1.72 official O2 rom and the same never worked anymore.
Does someone know if it is possible that some how wm5 1.60 cause an error inside the card and she died for all rom's?
Click to expand...
Click to collapse
Now I have WM5 2.01a64 and instaled 1.18 driver from the file: Safecom_11b_drivers.rar downloaded from buzzdev.net, the card waked up and then started to blink, the PDA detected the card and enabled the hifi option in the wireless manager, but the card did not found any network. Even after manually inputed the SSID.
I really think the card is damaged.
I have a SANDISK SD wifi card which i just can't get to work on my himalaya with wm5. Does anyone know if there is a solution yet?
San disk WIFI SD card doesn't have driver for WM5. I have look for in the website company, it doesn't support for WM5 driver. If somebody can solve driver issue for WM5, I think this problem will be solved immidiately
dear SammiBoi, could you update the links really need driver for safecom sdw11b Wi-Fi Card.
Best Regards
Gans15 said:
dear SammiBoi, could you update the links really need driver for safecom sdw11b Wi-Fi Card.
Best Regards
Click to expand...
Click to collapse
i don't think your going to get a reply, being that he hasn't been on since 15th march 2010.
google it
Gans15 said:
dear SammiBoi, could you update the links really need driver for safecom sdw11b Wi-Fi Card.
Best Regards
Click to expand...
Click to collapse
Maybe it is a clone of the JustMobile SDIO WLAN Card as mentioned here:http://forum.xda-developers.com/showpost.php?p=2134382&postcount=30
Or try from the previous post in that thread:http://www.ambicom.com.tw/support/WL54C-SD.html
Or try the workaround described here:http://www.gpspassion.com/forumsen/topic.asp?TOPIC_ID=132572
Thank you for your help, but does not work. If message Unrecognized Card
when i had one it would never hold a connection
hi links not working
muckelmaus said:
Maybe it is a clone of the JustMobile SDIO WLAN Card as mentioned here:http://forum.xda-developers.com/showpost.php?p=2134382&postcount=30
Or try from the previous post in that thread:http://www.ambicom.com.tw/support/WL54C-SD.html
Or try the workaround described here:http://www.gpspassion.com/forumsen/topic.asp?TOPIC_ID=132572
Click to expand...
Click to collapse
hi muckelmaus
ive tried those links you posted and they seem to be down,
please advise and many thanks for all your help.
rgds basic
basicbri said:
hi muckelmaus
ive tried those links you posted and they seem to be down,
please advise and many thanks for all your help.
rgds basic
Click to expand...
Click to collapse
Did you try the .cab file?
muckelmaus said:
Did you try the .cab file?
Click to expand...
Click to collapse
yes but no luck im afraid my wfi is plus com sd
any help on the thanks
rgds basic
basicbri said:
yes but no luck im afraid my wfi is plus com sd
any help on the thanks
rgds basic
Click to expand...
Click to collapse
hey muckelmaus your a bloody diamond' ive just got the thing working on those drivers you gave me' thanks a lot, i did not have my bluetooth on, also sorry to be a pain but could you give me a working link to any opera that will run on my system im using 6.55 from aero and is there a fix to update those graphic drivers to make it a bit more clearer, and last which version of tetris will run on my phone please from this link below.
http://www.elementsgames.com/stris2/downloads.php
thanks again your the best
rgds basic
basicbri said:
hey muckelmaus your a bloody diamond' ive just got the thing working on those drivers you gave me' thanks a lot, i did not have my bluetooth on, also sorry to be a pain but could you give me a working link to any opera that will run on my system im using 6.55 from aero and is there a fix to update those graphic drivers to make it a bit more clearer, and last which version of tetris will run on my phone please from this link below.
http://www.elementsgames.com/stris2/downloads.php
thanks again your the best
rgds basic
Click to expand...
Click to collapse
Take either landscape or portrait QVGA ARM version. It belongs on, what you prefer. The smartphone versions are smaller than the PPC.cab files!!
Search for opera mini windows mobile, works great!
Wififofum2 and Hitchhiker are well known wardriving-tools, but wardriving isn't legal everywhere!!! And they need .netcf 3.5 or 3.7, you loose additional 6.5MB free program-ram. There is a mobile version of the network stumbler around, too.
The best way to get 1h free internet in Germany , is to visit a fast food restaurant (the one with the golden arches).
I'm sorry for being so loud, but I've seen a few "progress pages" in Wikis and I still can't get a clear picture of who (if anyone) is actually working on linux for the HTC Magician (Qtek s100, iMate Jam, Dopod xxx, etc.).
I found this project:
http://userpage.fu-berlin.de/~zabel/magician/README
and it appears to be very very promising; it already delivers some small functionality on the magician (I've tried it). But there is much much work to do before it can be released to the general public.
In general, I don't think there are many people working to get the Magician on Linux...
So I am asking here: are you working on this? do you know who is working on this?
I am a SW developer by trade, but I have no time at home to code.
However, I would like to give whatever little time I can find to:
- act as a beta tester;
- develop one or two patches (kernel mostly);
so we can get Linux running on the Magician.
Thank you.
Hi,
This doese indeed look promising.
I have no qualifications in software etc, but i do like fiddling with linux -).
I too would be a beta tester.
So is anyone working on this?
Hi. As vnevoa found out, I am working on the Magician when I find the time.
Unfortunately, to my knowledge, there is no-one else currently working on this. So developers are needed!
For people interested in kernel hacking, there is the [email protected] mailing list and the #htc-linux IRC channel on freenode.net
The biggest missing parts currently are battery control, sound and the phone.
For everyone else, any improvements to the Magician wiki pages would be more than welcome. To build a proper userspace image for the Magician, support for this machine in OpenEmbedded has to be improved.
Wow!
That haret thingy is wonderfull.
What is the current state of the version for the Magician? Does it boot to GPE?
This is a great thing, really. No need to flash a new firmware, and boot linux! Amazing. I'm using Linux on ipaq and it is very nice. But I would miss phone operation. With haret we can have both things running.
Good work. Has anyone tested USB host on magician under linux?
futaris said:
Good work. Has anyone tested USB host on magician under linux?
Click to expand...
Click to collapse
USB host works, but it is not connected to the usb plug.
The bluetooth chipset is a CSR usb chip.
pH5 said:
USB host works, but it is not connected to the usb plug.
Click to expand...
Click to collapse
does that mean, usbnet is not possible? in my case, nothing happens if i connect the magician to my computer. dmesg and lsusb say nothing about a new device. insmodding usbnet doesnt help either. tried the same with a htc universal, usbnet works fine on my machine.
[edit]works for now, if connected via external-powered usb-hub. maybe a driver problem? activesync in windows-mobile is possible without using the hub.[/edit]
And if you check the website you can see all teh file you need to download if anyone know a programm for make call/sms/mms or ONLY calls and run on this linux please give information about
ok i try this one in a few and i edit my post when i have test all
ok today the : 28.12.2006
mmmm i have some trouble with extracting the gpe archive it's seem to be corrupted soooo bad.
BUT the first problem it's this famous default.txt the script to run haret if anyone have a working script please copy information here of the .txt file that's can be helpfull.
the error of my default.txt is: Failed to load kernel \carte de stockage\zimage
must i need to rename the zimage file???
and i have a question ... it's possible to make a "bootable" SD? if yes i can try to run another handled linux perhaps???
OK i have found i must rename the magician-zimage-2.6.XXXX to : "zimage"
so i have downlaod latest version of haret and take the default.txt WITHOUT changing
harte start but of course i haven't the gpe file so it's say error BUT it's launch now i must really found a good archive i have try under linux but the archive still in read only i can't change it to read AND write so all i uncompress are still not working under linux it's better on windows don't know why .....
(mmm risk to brick my magician if i try another gpe file .......)
and of course: sorry for my bad english
now i edit the post when i have MORE important news
I am having lots of problems getting ActiveSync to work. I can transfer files using Bluetooth.
Do I need a working ActiveSync connection to flash a ROM?
The Hard SPL pages talks about connecting the ActiveSync cable, but does not say why this is necessary.
I have a 4 Gig MicroSD card installed. Can I simply load all the necessary files onto it and go from there?
Perhaps a non-Orange ROM will solve my ActiveSync problem (not the reason I want to flash, but a possible good side effect).
Yes, you need activesync or the vista counterpart.
Try this - go to Settings | Connections | USB to PC | UN-check Enable Advanced network functionality and see if that helps
derek-farn said:
The Hard SPL pages talks about connecting the ActiveSync cable, but does not say why this is necessary.
Click to expand...
Click to collapse
ActiveSync will tell your Windows XP that the connected device is a Pocket PC and not something else. (Drivers)
I have a 4 Gig MicroSD card installed. Can I simply load all the necessary files onto it and go from there?
Click to expand...
Click to collapse
ROMs can be flashed with SD card. But the method and the files are different. Usually this is not on a first priority choice for cookers. And I dont remember Hard-SPL through SD. Though, going through a PC is always best as flashing ROMs are quite dangerous and if anything gets stuck in the middle, you shall try again from the PC but not through SD when your device doesn't even boot!
Perhaps a non-Orange ROM will solve my ActiveSync problem (not the reason I want to flash, but a possible good side effect).
Click to expand...
Click to collapse
Original(shipped) ROMs are always best. They dont give you much errors. People recover their device using original ROMs in case if they bricked their device using a cooked ROM! Original ROM can be flashed direct from Bootloader screen most of the times but would still require ActiveSync be installed.
Regards,
Carty..
You can use your memory card as per instructed here > http://forum.xda-developers.com/showthread.php?t=336158
Also you could try and put your phone into the bootloader mode by hand (instructions here > http://wiki.xda-developers.com/index.php?pagename=Kaiser_Resets ) that should work also as your computer uses a different set of drivers when flashing
Hi
First time post, please be gentle.
I am trying to flash a new rom onto my tytn II but I do not have windows or activesync on my PC.
I have tried searching but have not found the answer I need
Can I flash Hard Spl with linux only
Please help
Thanks in advance
You're probably best installing VM Ware onto Linux and then getting a copy of Windows to run through VM Ware. I think the USB should still work through this.
Not been tested but this is the best I can offer.
thanks for your reply
I have tried this and still no joy, someone must have linux installed and upgraded there rom on thr tytnII, I really dont want to have to install windows just for activesync
mac_d4di said:
thanks for your reply
I have tried this and still no joy, someone must have linux installed and upgraded there rom on thr tytnII, I really dont want to have to install windows just for activesync
Click to expand...
Click to collapse
There is a SD method, but don't know if can work to put HardSPL, because HardSPL needs to execute SSPL into the PDA before flashing the new SPL.
I have tested WinXP box inside Windows Vista to flash using VMWare, and works fine, so XP box inside Linux must work too...
Cheers.
Thanks for your super quick reply
Is there a way to run the rom upgrade without Hardspl installed at all.
or perhaps run the Hardspl from sd card and then upgrade it that way.
Sorry to ask so many questions
mac_d4di said:
I am trying to flash a new rom onto my tytn II
Click to expand...
Click to collapse
I don't know what is hardspl, but have you checked hermflasher ?
Maybe it will work with some minor changes:
http://forum.xda-developers.com/showthread.php?t=296436
mac_d4di said:
Thanks for your super quick reply
Is there a way to run the rom upgrade without Hardspl installed at all.
or perhaps run the Hardspl from sd card and then upgrade it that way.
Sorry to ask so many questions
Click to expand...
Click to collapse
Yes, you can use the SD method with the ROM matching your CID (inside your SPL). This allows you to put a ROM from the manufacturer/oem of your Kaiser.
You sould not install any ROM before having HardSPL...
Search the SD method on the Wiki. With the Sd method you only copy the NBH file into SD and go to bootloader...
Cheers.
Thanks for your comments, very helpfull indeed I will look into both of the methods described and report back on my progress
I've used VMWare without a problem. Make sure you set up your fstab file to allow quickswapping USB in VMWare or else you have to constantly suspend and start windows just to get it to recognize the USB after it disconnects.
Hi
Does anyone have a copy of SSPL-KAIS.exe that they got attach or PM me. thanks.
After digging a little deeper this may work although it has been removed from the main site
**found it dont worry
I got the Zenpap 4 Tablet, my basic problem is that I can't connect it to my PC check it with another PC and have the same problem.
Windows doesn't recognize the device tried to install many different drivers but with the same result, windows don't recognize the device and say's that the it's wrong driver (not only in my PC in the other one too)
What can I do? I thought to Wipe it (but don't know to do it) and from there try to root it and then upgrade it, do you think it may solve my problem by wiping it?
Please help me I'm desperate already.
Thanks in advance.
Ben
Zenpad 4 Overview:
Operating System - Google Android 2.1 upgrade-1
Storage capacity - 256MB DDR RAM, 2GB onboard, microSD 32GB
Processor - ZT-180 - ARM11 - Clock speed 1.0 Ghz
I don't know if it will help, but check this out:
http://www.jiongtang.com/fourm/android-f60/android-firmware-0708-download-t1474.html
It has the usb driver
Thanks for your answer, do you have another link to the firmware it dosn't work, both of them.
Again thank you for your kind help.
Regards,
Ben
Update: found it in another place and at last!!!! the driver worked!!! thank you very much for your help!!!!
Glad you got it working. That tablet looks pretty slick. Have fun with it.