Hi all this maybe a silly question but i gotta ask it .......
Is there a way to set the keypad to lock & to unlock using a 2 key sequence like on a normal phone (* then right softkey?) its a pain having to press 4 buttons to unlock the phone every time
Cheers!
I only hae to press two keys left softkey then "*" ? What are the two other keys you hae to press ?
when i set up the device lock it wanted 4 keys so i did 2,5,8,0 id rather set it as * then right softkey if its possible?
Why don't you just press and hold the "End call" button to lock the device? I've got used to it very quickly.
And I think only 2 keys are needed for unlock: left softkey and *...
wow cool didn't realise that
Thanks mate
still have to press 4 keys for the device unlock though?
Hmm, could it be that you've set a password for the device unlock? You can disable it in Start>Settings>Security>Device Lock
Hope that helps
This sounds like some third party software. Normal WinMo Standard is left softkey and then *. There are no options to change that. maybe you mean "Device Lock" found in options->security
DEVICE UNLOCK...differs from KEYBORD UNLOCK!!!!
Go to Settings>>Security>>Device Lock>>
Uncheck >>"Prompt if device is unused for"
sorted .
thanks again guys
Related
hi, i can't seem to find keylock application that locks all hardware buttons but power when device is on sleep mode. have you got it on yours? i had it on my old tytn II
do you have a
settings->buttons->lock ?
no. have you? i've got only Program buttons, Up/Down Control and backlight tabs there
hmm...you mean setting up a lock to turn off all keys until you hit Unlock then confirm by tapping the key on the screen?
Press and hold the "End" button and that locks the device.
It is configured under start>setting>Long key press.
MIGHT NOT be the thing you are meaning though.
no, you know when you pres power button phone goes sleep mode? there should be a setting where you can decide if you want to allow other hardware buttons wake phone from sleep or other wise.
currently which ever hw button i press phone wakes up i.e send (green) button, terminate call (red button) or action (round) button.
this is no good when phone in your pocket. a small touch to any of them wakes phone up. i thought it is standart wm option as i had it since wizard
Hmm, when i power off the only thing which will power back on is pressing the power button, opening the keyboard or removing the stylus?
I've just got a touch pro and when I power off, no other buttons will wake up the phone.
That being said, I still have my Tytn II and the Key Lock application is found under Start...Settings...System...Key Lock. The Long Key Press app is not what you're after.
It seems strange that your Touch Pro wakes up on any button push. Maybe you need to change a registry setting instead?
wierd ; on mine apart from those, any button powers it up. only config tool i used is advanced confing and there isint any setting regarding this on that tool
inspectorgadjet said:
Maybe you need to change a registry setting instead?
Click to expand...
Click to collapse
do you know which key i should change?
On touch Pro there is no Keylock option in the settings.
Only way how to activate the device is to:
1. press power button
2. open the keyboard
3. take out the stylus
There is no config like on the HTC Touch/Diamond.
I've contacted Julien Schapman, vendor of advanced config and asked him to add this settings to his application.
this is his answer:
Ok I will look at it when I could get a Touch Pro.
Best regards,
Julien Schapman.
So I hope his new version will have this settings. This is really missing.
But maybe someone is able to export this registry path on the HTC Diamond:
HKEY_LOCAL_MACHINE\HARDWARE\OEM\KEYBD
there should me something like
"KeyLock"=dword:1
Or maybe another. I don't know.
http://forum.xda-developers.com/showthread.php?t=422871
very cool app to unlock and lock the phone.
Tested and works on touch pro.
I'll be replacing S2U2 with this!
nolovelust said:
hi, i can't seem to find keylock application that locks all hardware buttons but power when device is on sleep mode. have you got it on yours? i had it on my old tytn II
Click to expand...
Click to collapse
It should be in the \Windows directory:
\Windows\Keylock.lnk
\Windows\Keylock.exe
Create a shortcut in \Windows\Start Menu\Settings
I don't have this in my HD2 - any ideas if it can be installed seperately?
No idea as I have an at&t Fuze and this is a RAPH/TP/Fuze forum You might have better luck if you posted a link to this thread in the HD2 forum? Also, an alternative to s2u2, check THIS thread (QuickShutdown)
n-Joie! (Enjoy)
KeyLock
eugene7 said:
I don't have this in my HD2 - any ideas if it can be installed seperately?
Click to expand...
Click to collapse
I haven't KeyLock in my ROM by default too, but I found it on another forum after many hours searching in the Internet
Unpack it and put enywhere (in example: "Windows" or "Program Files" and run).
Greetings.
Hi. Suppose I just want to remap the long end key press button to something other than the HTC dafault. Do I need AEBPlus for that? I assume that would be a overkill for remapping just one button. The HTC interal app only allows to either display the quick list or make 4 other actions. I was wondering if I can change that to something else without using the AEBPlus app. I just wanted to run the comm manager rather than the htc options
Thanks
Don't get your hopes up about AE Button cause it don't work if your using touch gl. Apparently touch fl keeps regrabning the keys so sometimes they work snd sometimes they dont. I gave up. i think ot might work better with the hold button but like i said i got frustrated snd gaveup when thr suthor told mr there was nothing he could do..
craigwillie said:
Don't get your hopes up about AE Button cause it don't work if your using touch gl. Apparently touch fl keeps regrabning the keys so sometimes they work snd sometimes they dont. I gave up. i think ot might work better with the hold button but like i said i got frustrated snd gaveup when thr suthor told mr there was nothing he could do..
Click to expand...
Click to collapse
Actually I don't need it working with the TouchFlo, as I don't use TF. I only want to remap the long end press button to the comm manager. Of course it would have been great to also map a long press on the Home button or the Back button but I think I read that's not possible even without TouchFlo ?
what no one answered ? wow i thought that's easy,a metter of registry or link change. quite disappointing.
I am also looking for a way to change the back button to run some other program...
How to assign a shortcut to EndKey, SendKey ....
Not tried myself on TP, but maybe it's useful:
http://forum.xda-developers.com/showthread.php?t=356322
Create a shortcut in your windows directory called long_end.lnk
whatever the shortcut points to will run when you long press the end key.
There are a few of these hard press shortcuts
long_end.lnk
long_send.lnk
long_power.lnk
long_ptt.lnk
short_power.lnk
short_ptt.lnk
I can remap all the buttons except the Long End. Somehow the Long End button is mapped to the phone Lock. Where can I disable that and allow for my own?
Start, settings, system tab, long press end key
if you don't see what you want there ... we might have to figure out how to disable the long press htc software
I cooked my own rom and I didn't put in long press end key. I assumed it wouldn't have installed any reg settings for it, guess I'll have to check. Thanks!
For some reason if you don't add HTC Long End to the ROM, it will stick on one setting and can't be changed. Weird, but fixable. If you install HTC End Key (the cab is somewhere on here) it will override the previous setting and then you can either select your preference from within the program or create a custom link. Not sure about the second idea working, since I haven't tried it myself, but I've been able to override HTC End Key when it was installed on previous phones. You could also consider un-installing it after installing it if all else fails.
baub said:
For some reason if you don't add HTC Long End to the ROM, it will stick on one setting and can't be changed. Weird, but fixable. If you install HTC End Key (the cab is somewhere on here) it will override the previous setting and then you can either select your preference from within the program or create a custom link. Not sure about the second idea working, since I haven't tried it myself, but I've been able to override HTC End Key when it was installed on previous phones. You could also consider un-installing it after installing it if all else fails.
Click to expand...
Click to collapse
Yeah, I recooked the Long End Key Press in, but there isn't a custom selection part of it so that must be a different version of End Key software. It's ok not too important.
AEB
Just for those who wonder, AEButton can remap everything (single, double, triple, long presses) on all keys except two: Long Green and Long Red.
You either need to disable Long End Key software or find some other way to hard map these.
Using my HTC Touch Pro. I am still unablet to map the Long press End Key to something other than the limited options that the HTC Long Press End Key program settings offer.
I simply wish to map the long press end key to run a different program. I tried the suggestion offered on this post (http://forum.xda-developers.com/showthread.php?p=1783616#post1783616) but it doesn't work. I put a file called Long_End.lnk in the windows directory, soft reset the device and still it doesn't map to that. Only displays the HTC 'quick list'.
I am not running TF3D.
Anyhelp ? To map to any program I choose ?
Thanks
So no buddy managed to map the End button long press to some other program than the options that the HTC's prg in the settings allow ?
I want to remap the End key to open Phone Weaver Profiles which is much more useful than what the HTC Long End Pressapp offers.
nik3r said:
Just for those who wonder, AEButton can remap everything (single, double, triple, long presses) on all keys except two: Long Green and Long Red.
You either need to disable Long End Key software or find some other way to hard map these.
Click to expand...
Click to collapse
That's not the full story ....
on ex: HTC HD
there are buttons:
"Green Key", -> mapping possible but without Long Press
"Home Key" -> nothing possible !!!
"Back Key" -> not really mapable (mapping possible, but always send to wanted mapping ~backspace and jump back to Homescreen and then the mapped button will execute - little bit strange ..)
Longpress also doesn't work
"Red Key", -> mapping possible but without Long Press
tried with aebutton also (last version)
some additional ideas ?
cu camel
Proto732 said:
Start, settings, system tab, long press end key
if you don't see what you want there ... we might have to figure out how to disable the long press htc software
Click to expand...
Click to collapse
HI!
I'm another one that tried everything to remap the long end key without that HTC app and no solutions.
What we really need is to know how to disable that app from the system.
Anyone help us!
Hi,
I have a question about the default WM lock - is it possible to lock the device but keep the application that is running shown on the screen?
I use long press of the End key to lock the TP but it jumps back to Home screen after locking.
I know Gyrator has a feature that doesn't but I'm wondering if there is a simplier way to do this. Any registry tweaks can manage it?
Thanks for the reply.
PS: (this might seem stupid) Which button is the PTT button? I can see it in the Button settings menu but I can't figure out what to push to make the particular appl to run. Thx
ferus said:
Hi,
I have a question about the default WM lock - is it possible to lock the device but keep the application that is running shown on the screen?
I use long press of the End key to lock the TP but it jumps back to Home screen after locking.
I know Gyrator has a feature that doesn't but I'm wondering if there is a simplier way to do this. Any registry tweaks can manage it?
Thanks for the reply.
PS: (this might seem stupid) Which button is the PTT button? I can see it in the Button settings menu but I can't figure out what to push to make the particular appl to run. Thx
Click to expand...
Click to collapse
So you want to be able to see the program running while your device is locked? I wouldn't know how to this because i just use the power button to put my device on standby.
BONUS!
If you look on the left side of your device, assuming you have an At&t HTC Fuze, the button under the volume up & down buttons and is marked "PTT" is the ptt button
fone_fanatic said:
So you want to be able to see the program running while your device is locked? I wouldn't know how to this because i just use the power button to put my device on standby.
BONUS!
If you look on the left side of your device, assuming you have an At&t HTC Fuze, the button under the volume up & down buttons and is marked "PTT" is the ptt button
Click to expand...
Click to collapse
Yep, exactly - I need my device locked but see the app running. But it's not the same as standby, I use my power button for that as well.
Bonus - this was indeed a stupid question I'm too embarassed to say that I own a non-branded TouchPro. That's why I couldn't find the button. Ah well, thanks for the reply.
I use AE Button Plus, and map a quick double press of the "red/hangup" button to lock screen.
I'm using the stock T-Mobile UK version of the Touch Pro (MDA Vario IV), still with TouchFlo3D enabled and this works with almost all applications, leaving the application running and on screen (but dimmed).
Hope that helps!
2 quick questions, they might be something simple sorry but I dont know how to get this to work.
1) How do you unlock your phone without the stylus? I know if you hold the end call key for 3 secs it locks it but I want to unlock the phone without the stylus. I hate ejecting it so the power goes on and then I can slide my finger on the "Lock Icon" left or right to unlock the phone.
2) How do you change the "Lock" Icon mapping? By that I mean its located at the top and I would like to move it to the bottom or middle. Once somehow automatically it was located in the middle and then I rebooted my phone and it went back to the top again.
I don't understand question 1 are you saying you take the styles out to turn the phone on? why don't you use the power button at the top? Then use your finger when it turns on to unlock it. I will admit i don't use the lock fetcher
But i think i understand the second question to move it to the bottom, go to start/setting/today/Items this will have a list of "icons" you have on the main screen select the Device Lock and move it to the bottom of the list. this should move it to the bottom and you are done.
1) you can unlock your phone without pulling your stylus out. press the power button to turn the screen on and then press unlock on the bottom left softkey followed by the confirmation on the center right side of the screen.
on the otherhand what you're asking for is called S2U (slide to unlock) which is an app the mimicks the iphone's lock interface
2) what mapping are you talking about? on the tf3d where the app tab is at? if so, then you just move it by using diamond tf3d tweak OR manually deleting the app and relocating it to where you want it.
Cool thanks for the help on question 1 I didnt know that.
For question 2 the same thing, do you know when the phone is locked and you have that icon that you have to slide left or right so that you can access the main menu on your phone (has the time, contacts, view messages, email etc.). That little bar that reads slide and has a padlock icon in the middle of it. That little button I want to reallign it in the screen. It happened once but I didnt press or change anything for it to happen, it just did.
Bump .
Hi!
I saw on this thread that there is a way to disable the lockscreen (http://forum.xda-developers.com/showthread.php?p=10491327#post10491327) by editing a registry key.
Code:
[HKEY_LOCAL_MACHINE\System\State]
"Lock"=dword:1
Unfortunately, it is not working and I don't know why. My phone is unlocked (this ROM: http://forum.xda-developers.com/showthread.php?t=1654415)
Is this the right key to change if I want this behaviour: when the screen is off, when I press the power button, it just re opens where I left without showing the lockscreen. Is it right?
No idea?