My camera suddenly stopped working, I took pictures yesterday as usual but this morning when I tried to take some, well the camera just doesn't want to launch itself..
I tried to go back to official roms and such but it didn't change a thing, is there a solution please I don't wanna say goodbye to my qtek9100 camera function
Anyone please? I really need some help
yo, anyone alive please?
you haven't given much information. Does the camera app start with a black screen? Have you tried to start the app via the shortcut instead of the button. If the camera was bad i'd think the software would still run. Could your button be bad?
No nothing works, it's not even recognized by the pda anymore, I tried to launch it with any way possible, I tried to reflash but it's still not recognized. I also looked if the camera was ok (inside the pda, dunno how to say) but it was still in place, it suddenly stopped being recognized after flashing a rom radio
I didn't really get more answer lol
Anyone please?
if you have problems with camera after flshing original rom, then your hardware is broken.
Hey all,
I just got (and totally love) the Fuze. I've already flashed it to NATF's 2.2 and it's just amazing. The only problem is that somewhere between yesterday and today, the camera has totally flaked out on me :-(.
I'll take a picture (and regardless of if its set to store on the memory card or internal mem) and once I opt to save it, the Fuze just hangs with the "Windows thinking" ball spinning. After a while it goes back to "Albums" and the recently shot picture isn't there.
I implemented the GPS fix and have been toying in Advance Config -- but I don't think any of those changes should have affected the camera. Even weirder, the picture counter is incrementing and I do have open storage on both the card and internal.
Any ideas?
- Matt
same thing happened to me.
Turns out autoconfig has a bug for the fuze.
For the camera options in autocofig
there's something called portrait, and was initially disabled.
changing it to enable breaks the camera.
took me days to figure that out...l o l
funnysam said:
same thing happened to me.
Turns out autoconfig has a bug for the fuze.
For the camera options in autocofig
there's something called portrait, and was initially disabled.
changing it to enable breaks the camera.
took me days to figure that out...l o l
Click to expand...
Click to collapse
Thanks! That was the problem and now the camera works fine! Is there a FAQ or something this should go into? Without your help I would never have found that.
- Matt
haa..np at all..just sharing something that i've found out after hours of hard resetting, flashing, installing, etc... l ol
maybe tomorrow'll be you helping me...
cheers!
-sam
Thanks!
I had this problem too, on both my Sprint Touch Pro and AT&T Fuze. Wouldn't save in photo mode (though video, contacts photo, panorama etc. modes were okay). There was no error message on the Fuze so I didn't realize there was a problem until I went looking for some pictures and couldn't find them. After I figured out what has going on I checked the Sprint version to see if it had the same problem. The Sprint Pro at least gives an error message about not being able to save the file.
I had installed Advanced Config on both devices, so I thought it might be one of the settings in there that had killed the camera. However, telling AC to restore all settings didn't fix it so I've been tearing my hair out looking for other causes. Fortunately I found this thread before rendering myself completely bald.
Is this a bug in AC, or was I wrong in my assumption that "restore all settings" would restore everything to default?
I wonder how many people with Fuzes have this problem but don't know about it due to the lack of an error message.
Cheers,
Elizabeth
Thanks, saved me hours. My pictures would save sometimes, but only half of the picture. Works perfectly again now.
glad someone helped you out!
funnysam said:
same thing happened to me.
Turns out autoconfig has a bug for the fuze.
For the camera options in autocofig
there's something called portrait, and was initially disabled.
changing it to enable breaks the camera.
took me days to figure that out...l o l
Click to expand...
Click to collapse
Thank you for sharing. Can't say how much time you saved me but you did!
Some searches I used to find this were:
raphael camera issue
raphael camera pause
raphael camera saving problem
touch camera issue
touch camera pause
touch camera saving problem
omg! this has bugged for the last month or so, and i've been too busy to do a good search on it! i thought i didn't try the right combination. i don't remember changing anything with AC, still thanks so much for the solution funnysam
Does new Autoconfig version fix the bug?
The latest version is 3.3.0.0.
Does anyone know if that bug was fixed?
I ask (instead of providing feedback from my own experience) because I had the older version installed first, and then installed the new version over it, so maybe the bug persisted.
AdvConfig 3.3 doesn't list the option for portrait now.
AdvConfig 3.3 doesn't list the option for portrait now.
Hmm, interesting.
I performed a "Reset all settings" did a soft reset, and the option for the Portrait is now visible, with "Enabled (default)" selected.
Once I disabled that option, camera is working great.
bwb8771 said:
...Option for the Portrait is now visible, with "Enabled (default)" selected.
Once I disabled that option, camera is working great.
Click to expand...
Click to collapse
Same problems, and this works for me
Thanks, Bros
I'm using AC3.3 and have some weird camera issues. The closest option I can see in AC3.3 is to "Encode photos in portrait mode" and have NO selected. Is this the option you guys are talking about?
Yes. That's the option.
For me, that fixed the issue of the camera taking *forever* to save the picture and then display the options buttons. Even if I left the camera to finish, the picture never saved.
And, it didn't matter whether the shot was landscape or portrait - with that option enabled, the problem persisted until that setting was disabled.
Too bad, because that would be a nice feature!
Thank you!!!
This problem has been plaguing me for the last 2 days. Seems that whenever I get my Fuze working just the way I like, something else happens to irritate the crap outta me. Thanks for posting this!
Hm.. I'm using Advanced Config 3.3 as well and it doesn't display the portrait option. Does anybody know the registry setting this is modifying?
I am glad I stumbled across this series of posts. My experience with the Autocofig Bug gave me several days worth of heartburn. Thank you for the help!! It was much appreciated!!!
I am looking for somebody to please attach to this thread a .reg of virgin (or nearly) settings stored in HKLM\Software\HTC\Camera
I'm trying to figure out a problem I've read about in other threads with unsatisfactory resolutions (hard reset and/or disable a feature). There are actually two problems.
1. My camera started locking up after taking pictures and pictures would not save. In Camera\Image there's a setting EnableEncodePortrait that controls whether the camera automatically rotates the picture 90 degrees. If you disable this, the camera WILL take pictures again, but...
2. The Album shows all new pictures rotated incorrectly 90 degrees. Basically, every picture is portrait and not landscape.
Now, these two problems seem to oppose each other. If you want the pictures autorotated to the correct orientation, you need the setting enabled. But if you don't want the camera to freeze you need it disabled. lol
Obviously somewhere along the line in my tweaking I've fouled something up. I'm thinking it's just a matter of finding some setting to tweak back to an appropriate value, so I wanted to compare the registry from a virgin install to mine. I would hard reset myself, but then I can't test to see if I fixed the problem or not.
Can I get a hand, my fellow tweakers?!
Thanks!
----
EDIT: I've found that my problem was the Diamond 2's gsensor. After I uninstalled that, and set EnableEncodePortrait back to zero, my problems magically disappeared.
are there anyway to have camera work proper with diamond 2 gsensor?
i dont think the solution is to uninstall and forget about it. i never have any problems with camera. i know the camera uses the accelerometer to decide whether to have the picture in landscape or portrait. i have an issue with double rotate in album though. ill have to get some proper screenshots of what i mean. other problems i have is teeter freaks out. i solved that by deleting the entry for it in gconfig. the rest i havent decided yet.
thanks
i uninstalled and live happily ever after~
First of all, I'm on an unrooted Thunderbolt with stock Sense UI and am using the stock gallery as well as the stock camera app.
Today, three different times, I've had some weird problems with my gallery. I'll load it up to find thumbnails of old pics that I've already transferred off my phone. For example, I took pics 36 - 40 (including video 5) off my phone and have two new pics (41 and 42) on there currently. When this strange reload happens, of which I cannot figure out, it shows pics 36 - 40 and the one video in there and not my recent pics. All of the pics won't open (rightfully so as they are no longer on the phone) and some will have missing thumbnails with a little icon on it, making it seem as if they are corrupt (which is what I thought when I first saw this).
The only way to fix this I've found is to use this app I have called SDrescan. I haven't tried restarting the phone as an option. It might work or it might not.
What would be the cause of this? I tried to recreate what I was doing at the time this happened those three times but it just seems to happen after a while. I would really like some insight to this as it's annoying to not be able to upload a pic I just took due it not recognizing it in the gallery.
I've searched through the threads and do not see anyone with this issue, but would like to see if anyone is experiencing this -- I have had the One for about 3 weeks now and don't do a lot of recording. Now that I have tried to use the recording function, it isn't working. No issues with the camera, but have only successfully been able to get the video to work about 4 times. Tried rebooting -- no change. Was on 33R and just updated to 38R. Video immediately worked three times in a row. Tried to record again about a half hour later and not working again. Anyone else experiencing this issue or have any suggestions? Thank you.
Check if you have time lapse mode activated. I made the same mistake once.
hyuratzu said:
Check if you have time lapse mode activated. I made the same mistake once.
Click to expand...
Click to collapse
Thank you for the quick response. Just checked and that setting is set to "Off." When I push the video button it clicks like it is taking a photo, but nothing happens. I did look at the files and they come up as "temp" files. Not a video or a picture. Any other thoughts/suggestions? I have posted this on the OnePlus One Technically forum and have received zero responses. I searched their forum and do not see anyone with this particular issue. I did send in a request for assistance with the company, however that will probably be several weeks for a response. Just trying any other places that I thought might have something I could try in the meantime. Thanks again.