Camera not saving picture - Touch Pro, Fuze General

Hey all,
I just got (and totally love) the Fuze. I've already flashed it to NATF's 2.2 and it's just amazing. The only problem is that somewhere between yesterday and today, the camera has totally flaked out on me :-(.
I'll take a picture (and regardless of if its set to store on the memory card or internal mem) and once I opt to save it, the Fuze just hangs with the "Windows thinking" ball spinning. After a while it goes back to "Albums" and the recently shot picture isn't there.
I implemented the GPS fix and have been toying in Advance Config -- but I don't think any of those changes should have affected the camera. Even weirder, the picture counter is incrementing and I do have open storage on both the card and internal.
Any ideas?
- Matt

same thing happened to me.
Turns out autoconfig has a bug for the fuze.
For the camera options in autocofig
there's something called portrait, and was initially disabled.
changing it to enable breaks the camera.
took me days to figure that out...l o l

funnysam said:
same thing happened to me.
Turns out autoconfig has a bug for the fuze.
For the camera options in autocofig
there's something called portrait, and was initially disabled.
changing it to enable breaks the camera.
took me days to figure that out...l o l
Click to expand...
Click to collapse
Thanks! That was the problem and now the camera works fine! Is there a FAQ or something this should go into? Without your help I would never have found that.
- Matt

haa..np at all..just sharing something that i've found out after hours of hard resetting, flashing, installing, etc... l ol
maybe tomorrow'll be you helping me...
cheers!
-sam

Thanks!
I had this problem too, on both my Sprint Touch Pro and AT&T Fuze. Wouldn't save in photo mode (though video, contacts photo, panorama etc. modes were okay). There was no error message on the Fuze so I didn't realize there was a problem until I went looking for some pictures and couldn't find them. After I figured out what has going on I checked the Sprint version to see if it had the same problem. The Sprint Pro at least gives an error message about not being able to save the file.
I had installed Advanced Config on both devices, so I thought it might be one of the settings in there that had killed the camera. However, telling AC to restore all settings didn't fix it so I've been tearing my hair out looking for other causes. Fortunately I found this thread before rendering myself completely bald.
Is this a bug in AC, or was I wrong in my assumption that "restore all settings" would restore everything to default?
I wonder how many people with Fuzes have this problem but don't know about it due to the lack of an error message.
Cheers,
Elizabeth

Thanks, saved me hours. My pictures would save sometimes, but only half of the picture. Works perfectly again now.

glad someone helped you out!

funnysam said:
same thing happened to me.
Turns out autoconfig has a bug for the fuze.
For the camera options in autocofig
there's something called portrait, and was initially disabled.
changing it to enable breaks the camera.
took me days to figure that out...l o l
Click to expand...
Click to collapse
Thank you for sharing. Can't say how much time you saved me but you did!
Some searches I used to find this were:
raphael camera issue
raphael camera pause
raphael camera saving problem
touch camera issue
touch camera pause
touch camera saving problem

omg! this has bugged for the last month or so, and i've been too busy to do a good search on it! i thought i didn't try the right combination. i don't remember changing anything with AC, still thanks so much for the solution funnysam

Does new Autoconfig version fix the bug?
The latest version is 3.3.0.0.
Does anyone know if that bug was fixed?
I ask (instead of providing feedback from my own experience) because I had the older version installed first, and then installed the new version over it, so maybe the bug persisted.

AdvConfig 3.3 doesn't list the option for portrait now.
AdvConfig 3.3 doesn't list the option for portrait now.

Hmm, interesting.
I performed a "Reset all settings" did a soft reset, and the option for the Portrait is now visible, with "Enabled (default)" selected.
Once I disabled that option, camera is working great.

bwb8771 said:
...Option for the Portrait is now visible, with "Enabled (default)" selected.
Once I disabled that option, camera is working great.
Click to expand...
Click to collapse
Same problems, and this works for me
Thanks, Bros

I'm using AC3.3 and have some weird camera issues. The closest option I can see in AC3.3 is to "Encode photos in portrait mode" and have NO selected. Is this the option you guys are talking about?

Yes. That's the option.
For me, that fixed the issue of the camera taking *forever* to save the picture and then display the options buttons. Even if I left the camera to finish, the picture never saved.
And, it didn't matter whether the shot was landscape or portrait - with that option enabled, the problem persisted until that setting was disabled.
Too bad, because that would be a nice feature!

Thank you!!!
This problem has been plaguing me for the last 2 days. Seems that whenever I get my Fuze working just the way I like, something else happens to irritate the crap outta me. Thanks for posting this!

Hm.. I'm using Advanced Config 3.3 as well and it doesn't display the portrait option. Does anybody know the registry setting this is modifying?

I am glad I stumbled across this series of posts. My experience with the Autocofig Bug gave me several days worth of heartburn. Thank you for the help!! It was much appreciated!!!

Related

Panorama not working

When i switch to panorama on my phone and attempt to take a photo it says, "Camera: Unable to capture photo. Disk full." I'm using 3GB of my 8GB card, so I know there is room on my card. I also tried saving it to main memory with no luck. I also tried switching it to the lowest quality and resolution, all with the same results. Any help would be appreciated.
:Bump: ANyone know of a possible solution>?
Got panorama to take pics, but can't stitch. No ghost image comes up. It just allows me to take 3 pictures, or however many i have the stitch counter set to. Does anyone know which P# folder in the registry and which settings enable the ghost image to enable stitching???
Thanks in advance.
I just noticed that I have this same problem, I think its when I edited the P3 reg.
edit: I changed the settings back to normal and still cannot take panoramic pictures...
Ya i'm having this issue too. I'm not sure what I did to get to this point? I installed NATF v4, I did a radio thingy. I did some GPS tweaks.
Anyone do any of that recently? Maybe we can try to isolate the issue?
I also enabled the FPS counter in the camera, you guys have that enabled?
07accordEX said:
I also enabled the FPS counter in the camera, you guys have that enabled?
Click to expand...
Click to collapse
hmm I don't believe I've done that
when I record video, it shows an icon saying that sound cannot be recorded also, weird...
07accordEX said:
when I record video, it shows an icon saying that sound cannot be recorded also, weird...
Click to expand...
Click to collapse
Yea I initially had that as well. I fixed it by going into the settings and adjusting the sound. Hope that helps at least.

[SOLVED] Album / Camera problems after installing Diamond 2 G-Sensor

I am looking for somebody to please attach to this thread a .reg of virgin (or nearly) settings stored in HKLM\Software\HTC\Camera
I'm trying to figure out a problem I've read about in other threads with unsatisfactory resolutions (hard reset and/or disable a feature). There are actually two problems.
1. My camera started locking up after taking pictures and pictures would not save. In Camera\Image there's a setting EnableEncodePortrait that controls whether the camera automatically rotates the picture 90 degrees. If you disable this, the camera WILL take pictures again, but...
2. The Album shows all new pictures rotated incorrectly 90 degrees. Basically, every picture is portrait and not landscape.
Now, these two problems seem to oppose each other. If you want the pictures autorotated to the correct orientation, you need the setting enabled. But if you don't want the camera to freeze you need it disabled. lol
Obviously somewhere along the line in my tweaking I've fouled something up. I'm thinking it's just a matter of finding some setting to tweak back to an appropriate value, so I wanted to compare the registry from a virgin install to mine. I would hard reset myself, but then I can't test to see if I fixed the problem or not.
Can I get a hand, my fellow tweakers?!
Thanks!
----
EDIT: I've found that my problem was the Diamond 2's gsensor. After I uninstalled that, and set EnableEncodePortrait back to zero, my problems magically disappeared.
are there anyway to have camera work proper with diamond 2 gsensor?
i dont think the solution is to uninstall and forget about it. i never have any problems with camera. i know the camera uses the accelerometer to decide whether to have the picture in landscape or portrait. i have an issue with double rotate in album though. ill have to get some proper screenshots of what i mean. other problems i have is teeter freaks out. i solved that by deleting the entry for it in gconfig. the rest i havent decided yet.
thanks
i uninstalled and live happily ever after~

HELP My camera won't save pictures! Video included

Hello and please help!
My camera won't save photos, It just gets stuck! The phone has Romeos, and the camera worked fine until last week. Romeos is like 9 months old or something.
I can't post links because I'm new here but you can find it by going to youtube.com/watch?v=M6dwOhGWLNE
I have been through the same situation, and the problem was solved.
Thread
funnysam said:
same thing happened to me.
Turns out autoconfig has a bug for the fuze.
For the camera options in advanced cofig
there's something called portrait, and was initially disabled.
changing it to enable breaks the camera.
took me days to figure that out...l o l
Click to expand...
Click to collapse

[Q] Camera Issue - HELP

Hello all,
I'm hoping someone an help with this.
I have already asked a few people, but no-one has been able to solve it just yet. I have faith though.
No matter which ROM I use (was using Vegan initially, then tried TnT Lite and even the stock TnT) when I try to use the camera it seems to "crash". The app loads, and I can interact with the app, but the camera screen seems to crash (colored lines for a split second, then nothing) then goes black. I can still change settings in the camera (such as change to video etc) but the camera screen is just black. When I click the shutter button to take picture, the picture appears at the top right in the little box but is just a green square.
Anyone any ideas?
Does it sound like a software issue? Or hardware?
I'm really hoping software as I don't want my tab to be broken.
I have not tried an nvflash yet, but probably going to do that tonight and fully reset it. Might that help?
Thanks in advance!
Mine was doing something like this. I found out with mine that when I opened the case, the camera had popped out of it's spot and wasn't pointing out the keyhole.

G2X Camera Won't Launch

For some reason, the Camera function on my G2X no longer works. It worked a few times previously, but now every time I launch the screen flickers and nothing launches.
Persists across reboot. Cleared data on the camera app, want to avoid wiping the phone if possible.
Anyone run into this, before, or know a fix?
Casao said:
For some reason, the Camera function on my G2X no longer works. It worked a few times previously, but now every time I launch the screen flickers and nothing launches.
Persists across reboot. Cleared data on the camera app, want to avoid wiping the phone if possible.
Anyone run into this, before, or know a fix?
Click to expand...
Click to collapse
Haven't run into this problem myself but you could try downloading an alternate camera app from the market to see if that works. If it does, you may have to factory reset your phone. If it doesn't, it may be the hardware(the camera itself).
Casao said:
For some reason, the Camera function on my G2X no longer works. It worked a few times previously, but now every time I launch the screen flickers and nothing launches.
Persists across reboot. Cleared data on the camera app, want to avoid wiping the phone if possible.
Anyone run into this, before, or know a fix?
Click to expand...
Click to collapse
I noticed this problem as well, after rooting the phone. I'm not sure if it was an issue before that or not. But what I found is that if you rotate the phone into landscape mode and then open the camera app it works fine. Only trying to open it in portrait caused me any issues. Hope this helps.
zoman7663 said:
I noticed this problem as well, after rooting the phone. I'm not sure if it was an issue before that or not. But what I found is that if you rotate the phone into landscape mode and then open the camera app it works fine. Only trying to open it in portrait caused me any issues. Hope this helps.
Click to expand...
Click to collapse
This is ridiculous.
Yet true.
I'll be resetting my phone tonight to fix the battery drain, hopefully this will be resolved at the same time. But this definitely worked, so I can test out this camera some more while I wait. Thanks!
I had this issue too. Try opening while in landscape. Once open switch to portrait then close while in portrait. You should be able to open on portrait after.
Edit: This only works some of the time
Has anyone figured out the camera issue? I had my camera working fine, I rooted the phone and now the camera just flickers around the button. Must have this camera working.
Thanks
djcense said:
I had this issue too. Try opening while in landscape. Once open switch to portrait then close while in portrait. You should be able to open on portrait after.
Edit: This only works some of the time
Click to expand...
Click to collapse
Had same issue, as you noted the reset solved my problem, camera is working AOK. I would have hated to loose the camera function, it is a good camera.
2nd phone that my damn camera stopped working after about 15 minutes. I didn't root this phone to make sure that wasn't the issue. The camera worked after I did a factory wipe, got it all set up and was taking pictures while I was setting it up to make sure it wasn't a rogue app. Thought I was in the clear and tried to take a picture and nothing. Same problem everyone else is having. just wiped the phone again for the 3rd time and camera works, going thru same process, can anyone give me any advice on this camera. Very strange and getting real pissed off.
Vinny
vinnyjr said:
2nd phone that my damn camera stopped working after about 15 minutes. I didn't root this phone to make sure that wasn't the issue. The camera worked after I did a factory wipe, got it all set up and was taking pictures while I was setting it up to make sure it wasn't a rogue app. Thought I was in the clear and tried to take a picture and nothing. Same problem everyone else is having. just wiped the phone again for the 3rd time and camera works, going thru same process, can anyone give me any advice on this camera. Very strange and getting real pissed off.
Vinny
Click to expand...
Click to collapse
I use anylock to bypass my lock screen so when I get a text message (ssm popup) It will open up my screen automatic and display text message. This way I'm not always pushing my power button to gain entry to phone. Problem is the lock screen app is some how screwing up the camera app. Also tried no lock and same problem.
Just wanted to let anyone using lock screens what I encountered, maybe save you hours of resetting phone.
vinnyjr said:
I use anylock to bypass my lock screen so when I get a text message (ssm popup) It will open up my screen automatic and display text message. This way I'm not always pushing my power button to gain entry to phone. Problem is the lock screen app is some how screwing up the camera app. Also tried no lock and same problem.
Just wanted to let anyone using lock screens what I encountered, maybe save you hours of resetting phone.
Click to expand...
Click to collapse
Mine was doing the same thing and I was about to blame it on Pauls patch. It turned out to be widget locker. I froze it in Titanium and then it came on with no problem. I was really close to wiping AGAIN. Really glad I saw this. Thank You

Categories

Resources