Dear all,
is there a way to chance audio properties of a WM Phone upon ActiveSync connection?
I could change profiles manually, but automatically upon connection would be quite handy.
Thanks!
Christian
PS
please move if there's another, better suited form here. thx.
Sorry, I am only trying to get this to p1 again.
No Ideas?
Related
Hi,
This maybe should be in the development hacking channel, But im not sure it's 'hard core' enough...
What im looking for is someway to trigger a mort script when my phone makes the connection to my laptop via bluetooth.
I'm looking for any kinda of change that i can detect in the phone somehow, in order to trigger a mort script to set the WM06 Internet sharing to BT and connectable, so that i can get internet access on my laptop through my phone without having to touch my pocketPC....
I'm sure there are more people that would like this feature to make it as usable as DUN was...
any advice or pointers would be greatly appreciated.
Got it! (Kinda)
If i iniciate a object push to the phone, and have a mort script waiting for the windows title Recieving data... this can be my trigger.
Its easy to start an object push to the phone from the PC so the rest can be automated from here
will post back if i get a working script
I have installed the latest ROM from Dutty.
I have re-installed everything and paired with BT headset. Using Voice Command with headset no problem.
What I have not been able to figure out is to get Activesync working thru bluetooth. I have it paired with my laptop put it only gives me the option for Dial up networking for services.
Everything else is working better than ever and this ROM makes me appreciate my Tilt even more.
Any suggestions?
I suggest you post this question in his latest ROM thread. That is a more appropriate place to post this questions.
good luck.
Anybody have any suggestions on this issue.
This is the only thing I have not working. Just fixed VC1.6 Call announce.
Any help would be great.
To begin, delete your computer from your paired-devices list on the kaiser, and also delete your kaiser from your computer's paired-devices list.
Now, begin the process of setting up a BT connection on the kaiser, but to be able to use Activesync over bluetooth, you need to enter a password with more than 6 (possibly 8, but I think it's 6) characters. Once that's done, you should see Activesync in the services list.
BUT it has to be a "new" pairing, so be sure to delete the devices from each others' lists first. Otherwise, it won't work.
TerraNocuus said:
To begin, delete your computer from your paired-devices list on the kaiser, and also delete your kaiser from your computer's paired-devices list.
Now, begin the process of setting up a BT connection on the kaiser, but to be able to use Activesync over bluetooth, you need to enter a password with more than 6 (possibly 8, but I think it's 6) characters. Once that's done, you should see Activesync in the services list.
BUT it has to be a "new" pairing, so be sure to delete the devices from each others' lists first. Otherwise, it won't work.
Click to expand...
Click to collapse
This is how I tried to setup after a hard reset to the Tilt and I deleted the pair from my computer. I can pair the laptop to the Tilt. But the only services I get available are Dialup Networking and Network Access. When I try start ActiveSync from the computer it says I do not have a partnership that supports and when I try from the computer it tells me the Tilt does not support that service.
Thanks
cephus6 said:
This is how I tried to setup after a hard reset to the Tilt and I deleted the pair from my computer. I can pair the laptop to the Tilt. But the only services I get available are Dialup Networking and Network Access. When I try start ActiveSync from the computer it says I do not have a partnership that supports and when I try from the computer it tells me the Tilt does not support that service.
Thanks
Click to expand...
Click to collapse
make sure that activesync is set to the com port that you have defined as an incoming com port for you bluetooth (on the pc, not the phone). how to do this.......it all depends on what bluetooth stack you are using.
Finally got it.
The COM port matched in ActiveSync, but I discovered the bluetooth on my laptop would not delete my old version phone. It said it deleted, delete, close, reopen and it would reappear. Once I killed that everything worked like a charm.
Thanks for everyone's help and thank you Dutty for your work.
Recently I had this problem. My friend was able to download
files from my device ( Omnia 2 WM 6.5 ) to his HTC device
using the blue tooth. It was not intentional but it happened
when he tried to connect his phone to mine using the
BT connection.
Is there any special program that can prevent such things
from happening..or rather allow the owner of the phone to
have control over his device, while sending or receiving
files by BT.
Thank you.
Welcome to forums
What about using in no discoverable mode?
orb3000 said:
Welcome to forums
What about using in no discoverable mode?
Click to expand...
Click to collapse
That function just allow you to make your fone visible or not.
It gives you no control on what is allowed to be sent out..
or am I mistaken ?.
Thx
Hi,
I am in need of some help on this topic. I am not certain if it is a ROM issue, an AS issue or a ME, like me issue.
Please don't flame me, done lots of googling, searching, etc and no luck.
Trying to sync with my laptop over bluetooth and using AS.
All goes well with the setup, each device sees each other, but when on the HTC Iolite, I go to
AS
CONNECT VIA BLUETOOTH
YES, to SET UP AN AS PARTNERSHIP
on the MODE tab, TURN DISCOVERY ON
on the device tab, Add a NEW Device
on the COM PORTS tab, to try to set up an OUTGOING PORT I do NOT have any options to select.
with my HTC Iolite I am running the latest iOmEgA rom installed.
Has anyone else had this same issue and BT with ANY other ROM on any other HTC or PDA? I have not flashed a different rom or tried this previously, so am not sure if it is a rom issue or a AS issue or what.
Thanks in advance for any help.
malloy0
I usually only get it to work if there's a partnership established already. Meaning you should first connect it by wire, do an initial sync, and then try using bluetooth.
malloy0 said:
Hi,
I am in need of some help on this topic. I am not certain if it is a ROM issue, an AS issue or a ME, like me issue.
Please don't flame me, done lots of googling, searching, etc and no luck.
Trying to sync with my laptop over bluetooth and using AS.
All goes well with the setup, each device sees each other, but when on the HTC Iolite, I go to
AS
CONNECT VIA BLUETOOTH
YES, to SET UP AN AS PARTNERSHIP
on the MODE tab, TURN DISCOVERY ON
on the device tab, Add a NEW Device
on the COM PORTS tab, to try to set up an OUTGOING PORT I do NOT have any options to select.
with my HTC Iolite I am running the latest iOmEgA rom installed.
Has anyone else had this same issue and BT with ANY other ROM on any other HTC or PDA? I have not flashed a different rom or tried this previously, so am not sure if it is a rom issue or a AS issue or what.
Thanks in advance for any help.
malloy0
Click to expand...
Click to collapse
zzattack, others...
Well...it took me almost all night, but I learned aha! that the devices were NOT paired, when they are and ONLY WHEN THEY ARE, do you have the option to set an OUTGOING PORT. so I got it to work, frankly, this should be easier than it is. Now, with this said the AS connection is very, very tempermental in that
1. I stop syncing,
2. leave my office, with my phone / PDA with me,
3. return and reconnect via BT, then
4. activate sync from the phone / PDA AS, via the Connect via Bluetooth
5. I get the SET UP AN AS PARTNERSHIP and say YES then I can resync
6. Again too, too funky, but at least no USB cord
7. In the end I wil give this sync method a whirl and see how it goes.
Thanks!!
malloy0
THread moved to Q&A
Best way to get it working properly is:
Delete any existing pairings on both the pc and ppc.
Check that the bluetooth program on your pc has a com port set up and that your pc is discoverable.
Go to activesync connection settings on pc and check that it is set to use the same com port as the previous step.
On ppc, go to activesync and attempt to 'connect via bluetooth'.
When it doesnt find a connection, select t create one, add device, and create a partnership with your pc. It SHOULD find activesync as a service.
Now you can close the bluetooth menu, and 'connect via bluetooth' again.
Make sure you are initiating the pairing from the ppc, and always initiate the sync from the ppc.
Hi all,
I have searched and searched the forum and the internet but can find no answer to this issue.
I'm using an HTC Touch Dual (Neon 200) that I had set up to connect to my PC via bluetooth for Activesync.
No problems there, it all worked fine. The issue comes with my attempts to automate the synchronization. I had found and successfully used a program called CT Scheduler to start the bluetooth radio and then instigate the "Windows/repllog.exe" file to start a bluetooth activesync.
In Activesync, on the Touch, I go to "Menu-->Connections--->when cradled, synchronize all pc's using.........."
I had the option to select "`USB" or "`DIRECTORSOFFICE" (the name of my PC).
Now, I have no idea how the "`DIRECTORSOFFICE" option got there but I selected it and it all worked fine. I could connect via USB or Bluetooth and the auto-sync worked fine.
BUT, Here's the kicker, after a hard reset, I've restablished all my connections via bluetooth etc. and can manually initiate a sync via bluetooth. HOWEVER in the Activesync connections I can no longer select aything other than "`USB". For the life of me I cannot remember how I got the Touch to give me that other option and it is the ONLY thing preventing the auto bluetooth sync from working.
Any insight would be much appreciated.
Hi and welcome to XDA,
did you do a H-Reset or a new rom flash? the new rom may not support BT Activesync, you should also pair your phone to your PC, that may enable the option
Eh - my bad...should have specified in my OP. This is running stock WinMo 6.1 Professional.
Did you pair to your PC?
Not this time around.....dammit you know that sounds like it might be it! I'll have to a backup, hard reset and try it out.
If that's truly the case and I can get that option available again then I have a really tidy solution for people wanting to Autosync via Bluetooth.
(Although this is probably not an issue nowadays as most phones are coming with WiFi, so I guess people are syncing that way)
Badwolve1 said:
Did you pair to your PC?
Click to expand...
Click to collapse
OK, got too excited there. Of course I must have paired it with the PC or I wouldn't have been able to Activesync via BT manually right?
woodbane said:
OK, got too excited there. Of course I must have paired it with the PC or I wouldn't have been able to Activesync via BT manually right?
Click to expand...
Click to collapse
Depends what stack you have
Sorry, i don't think i can help
If i find anything, i'll let you know
Default MS BT stack for WinMo Pro 6.1. I haven't changed anything on this ROM at all.
I must have done something during BT setup that allowed that option to appear but I'll be damned if I can remember what it was!
It's not a huge deal as I luckily had a backup with that configuration working, I was just being a bit anal about doing a complete clean install, there were a few programs I wanted to get rid of and felt my phone had slowed up a bit.
Cheers.