Database Info

JAM is dead ..Creash no power just blank screen

Hi all ,
I was updateing my JAM ROM with USB.. everything work fine.. but i guess i had upload Arbic ROM on PM-10A which support WWE, after upgrade my JAM was keep rebooting so i try to download WWE ROM from imate FTP and meanwhile i Remove Bettery of my JAM and once i install battry back they is no power nothing just blank screen. seems bootloader gone? is there chance i can repair.. i do NOT have warrnaty on it , service center say they need to change MotherBoard. is there any other way i can reload bootloader and then upgrade orignal ROM?? pls. help........( SORRY for MY English as i m Arbic Native ).[/b]

Don't know why you removed the battery. What happens when you do the soft or hard-reset? Tried pressing power & camera & soft-reset at the same time for some secs, till bootloader should appear? I don't think it's really broken as you said it was loading the OS whili you removed the battery.
Cheers, M

I think the bootloader itself can get corrupted whilst doing the upgrade..but only when using a 'modified' ROM...
I did the same thing to mine back in the time when BigStorage was the in thing.
My JAM was totally dead like yours and I did have to send it back to service center.
But saying that, I recently had forgot to charge the battery (whilst doing a ROM upgrade) and everything went totally dead then too- i was worried that I had fried the device one again- but I left it to charge overnight (initially there were no LEDs of any sort), the next day, the amber/yellow LED was lit- did a hard reset and things were back to normal.
I don't think any sort of factory ROM would 'fry' your device- it's only because I tried to modify the bits for BigStorage that led to a corrupt bootloader and therefore a dead device.
Like 'oltp' says- it seems highly unlikely that your device is totally dead.

tnx for reply guy's, i did Tried pressing power & camera & soft-reset at the same time for some secs.. but nothing comeing on screen.as you said may be bettery is not charged as when i stared ROM update i had 50% charged. now when i try to charge with USB no LED.. .. but some how i do not belive service center guy.. that " board burn" need to change board as i have just done ROM update from IMATE web. but tomorow i ll get it back from service center and give try with new battery and let you know ppl..

I really wish you all the best & I do think those guys do know & try everything. They just replaced mine as it was really dead two weeks ago.
Too bad you're not having so much luck.
Cheers, M

hi all ,
Finally my JAM is up and Running without changing Mboard. as i suspect it was battery problem I borrow my friend full Charged battery and did Boot loader with Cam+Power+SoftReset and then connect with USB and reload ROM and now it up and running fine .. and then i replaced with my original battery

Great to hear that.

Help! My O2 XDA Touch Pro is completly dead!

Hello,
i have a brand new o2 XDA Touch pro. After trying (unsuccessfully) to remove the CID to flash the original HTC Firmware (the O2 Firmware was lame), the XDA went off and is completly dead now. The last thing I was able to see was a strange display behaing (some strange look and fading off).
The phone does not react on pressing the Power-On Button! No reaction!
Can anyone help me or has anyone a hint how to hard-reset the device?!
So far I remember there was a trick by removing the battery for about 24 hours (this worked for my older xda mini s phone). May this work for this phone, too?
Please help me!!!
Best regards
Gabriel

Did you try the old tric to remove the battery and then put it back in? When you do the Hard-SPL it would remove the CID lock. It would seem to go dead and unresponsive as happened with mine. I just removed the battery and put it back in and it powered up fine. Checked the tri-colour boot screen to make sure it was done. It is in the thread for flashing your first ROM.

Hello wildcard,
thanks for your reply.
I already tried removing the battery. Yesterday I tried for about an our and completly off power (no USB Power or PC connected). Still no reaction after trying to power on with battery plugged.
I'll give it another try in about a few hours after leaving the phone powered off about 12 hours. So far the phone seems completly dead! I would be glad even to see any light / display going on with try-color mode, but anything keeps powered off after battery connected and giving the power-on button a try.
Best regards
Gabriel

UPDATE:
Phone still completly dead / no-power on possible after 12 hours power-off / no battery!
Tried several key-combinations for soft+/hard reset with battery and/or USB-Power even with plugging in while pressing the keys including power-on. NO Reaction
How can this be??? May it only be possible to send it in to O2?
I was unable to complete any CID unlock / HTC Firmware update on the O2 device. They stuck always on 0% or failed before this step and until that time the phone always rebooted into WM6 after battery removal. So I don't think O2 could blame me for doing anything wrong... and I don't understand why there is not even Power for Bootloader mode possible. I don't think that any software could harm the hardware in such a way that not even power-on is possible??!
Any ideas of developers to reanimate the phone? I will try keep power of for a few days now until I go to O2 with the phone...last try. For a XDA Mini S i owned once (that phone has been unlocked too), this worked once it had a similar failure... maybe I have luck in 2-3 days with my TouchPro phone.
Best regards
Gabriel

I am thinking that you may really need to send it in to O2. Might be your best bet, let's hope some one more ducarted than I am chimes in.

Big problem-MDA Vario IV(HTC Touch Pro)

Hello.
I've got an MDA Vario IV, and I've tried to Update the Windows Mobile version from 6.1 ti 6.5. I've connected the phone via USB and the Update get started. On the display appears the boot loader with that colors, and after a few minutes on my computer display give's me an "Connection Error". The phone was so hot so I've removed the battery. The Phone was turned off and never come's alive. I've tried the Reset button, but no action. I can not power on my phone So please help me someone, I'm bagging You.

Welcome to forums
have a deep read here:
http://wiki.xda-developers.com/index.php?pagename=HTC_Raphael
Good luck,

Thank You...
I've got no help with this. If my phone doesn't even Power On

is it coming back to bootloader? Did you try low volume button+Reset? Dont panic, it happens sometimes, try to charge the phone in normal way see if that works, I dont think so its anyway more than a software problem.
Let us know & keep following the WIKI. Good Luck.

No it isn't coming back to boot-loader. I've also tried the Reset with the other buttons but it doesn't worked. Some guys told me that I have to disassemble the phone and connect on the motherboard six pin with a J-tag cable and than is should connect to the computer to rewrite the prom and that re-soft the Windows Mobile.

I wudn't suggest you to do that. Dont you have warranty? If you dont have we can do some other thing, did you keep battery off from phone for few days?

No, I've got no warranty any more. No,I didn't tried to remove the battery for a few days, but I think that maybe is empty because I didn't connected to USB or charger for a few days. When I tried to power on the phone the battery was certainly full, I'm sour of that. And some people told me that the phones with Windows Mobile can not be charged to USB if is really empty, it should be charged by charger, but it doesn't work like that. Any ideas? I really appreciate your involvement, so thanks.

Help please my Polaris is dead

After installing a new rom ,my polaris died ,no lights not recharging , I removed the battery,the SD and the sim card for > 24hrs and still the usb is not recognised and no lights at all and also not recharging any solution????

Hey.
Im reading u have a problem Polaris not booting up or worse not even working. Well i have the same problem and im also looking for a solution.
My device started to play tricks on me, like shutted down when not needed, freezing, and also when freezing i pressed reset button which did nothing but shut the device down completely (not even charging or booting up again). After many hours later it worked again but still had the same problem.
And well... now... now its totally dead, it stayed off for a day and not even charging nor booting.
Come on guys, some one must have had this problem before and maybe u can tell if its fixable or do i really have a f*cking brick on my table. , and also how can i avoid it if im getting myself another device?

I have the same problem with polaries...
shizny said:
Hey.
Im reading u have a problem Polaris not booting up or worse not even working. Well i have the same problem and im also looking for a solution.
My device started to play tricks on me, like shutted down when not needed, freezing, and also when freezing i pressed reset button which did nothing but shut the device down completely (not even charging or booting up again). After many hours later it worked again but still had the same problem.
And well... now... now its totally dead, it stayed off for a day and not even charging nor booting.
Come on guys, some one must have had this problem before and maybe u can tell if its fixable or do i really have a f*cking brick on my table. , and also how can i avoid it if im getting myself another device?
Click to expand...
Click to collapse
Please anybody help me.. Its pain for me. the phone is not opening. What I do now...

Check if your battery is not dead(voltmeter i guess), also what ROM/radio did you tried to install, also did installation completed successfully?
Don't want to make assumptions, but i think it's terminally dead(mobo fried?)

Thanks for your advice...
I checked my battery with voltmeter, it shows ok..
I installed the Salvy.C.83_Megan_v1.4_WWE_Polaris_EzInput_2.1 ROM and it was successfully installed, but after 1 day it is fully not opening, not responding...
What should I do......
Please help..

retsam88 said:
Check if your battery is not dead(voltmeter i guess), also what ROM/radio did you tried to install, also did installation completed successfully?
Don't want to make assumptions, but i think it's terminally dead(mobo fried?)
Click to expand...
Click to collapse
Thanks for your advice...
I checked my battery with voltmeter, it shows ok..
I installed the Salvy.C.83_Megan_v1.4_WWE_Polaris_EzInput_2.1 ROM and it was successfully installed, but after 1 day it is fully not opening, not responding...
What should I do......
Please help..

Could be the nand failing have a look using mtty to see if you have any bad sectors.
Disable usb connections in wmdc or active sync.
Put the phone into bootloader screen.
open mtty Connect mtty to you usb port.
Type info 8 to check for bad sectors.

meknb said:
Could be the nand failing have a look using mtty to see if you have any bad sectors.
Disable usb connections in wmdc or active sync.
Put the phone into bootloader screen.
open mtty Connect mtty to you usb port.
Type info 8 to check for bad sectors.
Click to expand...
Click to collapse
Thanks for advice..
But my polaries is not powering on
So what I do....???

I have the same issue, my polaris if connected to usb doesn't light orange, can't go in bootloader anymore and mtty seems to not been able to issue any command to the device.
As you know, is there a way to flash an hard spl via mtty? Or another way to flash it on my "seems bricked" device?
As for info, i was using the same rom as you, but mine was working great!
And now seems dead... my invincible polaris...
Please, anyone help us?
Thanks!
Sent from my Liquid using XDA App

Bump....
Anyone can help us?
Sent from my Liquid using XDA App

I have the same problem, my Cruise is dead.
Yesterday was OK, its functions run perfectly.....Today morning it's turned off
Orange light flash, after 20-30 seconds it turned off and Cruise became hot.
I don't know what's happen.....someone has any idea ?
Thanks in advance.

Samsung Epix bricked??

Well i just got a samsung epix
and i was doing the upgrade to trashcan's 6.5 mod
at first it did fine, i got i00% flashing, csc hanged because i unplugged it (but i have seen that the csc always hangs and that you have to unplug and turn off your phone)
The phone stayed on the samsung screen and never booted
after that i tried running the process again, but t never seems to complete 100%
what can i do?
I'm desperate!!!!!!

Welcome to forums
Have a look here:
http://cellphoneforums.net/samsung/

Same thing happened me, Do you found a solution¡?????, I couldn't upload at 100% the windows mobile. 6.5 and now is totally bricked.