I'm sure I'm missing something simple. When I press the button on my bluetooth headset the phone activates voice dialling and I can make a call. At the end of the call I press the button again (the only one!) and my TP does not hang up. I have to press the hangup key on the phone or switch on the screen and press the red end call button. I can preses again on the bluetooth set (get a tone) but still nothing. Holding in the button eventually switches off the headset but still the phone stays connected! Using vodafone UK branded TP and vodafone handsfree bluetooth headset. Am i missing some sort of setup on the phone to make this work?
Related
Hi All,
Is there a way to edit Smartskey to allow using one of the hardware buttons to trigger the Speaker On/Off option?
Thanks!
Speakerphone?
It's already hardware button binded to press and hold green call button, during a call. Handy in the car when your bluetooth headset needs a charge, quick press the green button to answer, then immediately press and hold to switch to speaker.
Or do you mean use the speaker for other purposes?
Gajet said:
Speakerphone?
It's already hardware button binded to press and hold green call button, during a call. Handy in the car when your bluetooth headset needs a charge, quick press the green button to answer, then immediately press and hold to switch to speaker.
Or do you mean use the speaker for other purposes?
Click to expand...
Click to collapse
Tried it on my ETEN X500 and it places the call on hold instead.
In addition I'd like to be able to switch to speakerphone whenever, meaning
When I receive a call or place a call myself.
Not sure about Eten phone, but HTC's phone (most if not all), you will have to press and *keep holding* the green button long enough (while on call). Pressing it will give you 'Call on Hold'. Alt, you try PhoneAlarm .. or PocketPhone Zen (something like that) that gives you profiles (like Nokia phone) that enables you to have the option of getting speaker phone automatically upon receiving.
Firstly - hello all! What a great forum, I've gone from knowing nothing about Windows Mobile to having a fully customised Raphael in about 48 hours!
But: I have a set of Motorola S9 Bluetooth headphones which work excellently (although I haven't yet made or received a call using them). I also have a Sony a2dp Bluetooth headunit which also works excellently.
However .... As a matter of course I use the one touch power button to lock/standby, and when I press play/pause on either bluetooth device it automatically unlocks the phone.
When I'm driving this isn't such an issue as I will be ordering a Brodit Car Cradle very soon. But when I have the handset in my pocket using the S9 having it unlocked is a recipe for unwanted screen presses. I use the Touch Media Player (I know it's not the best but it seems to work OK for what I want) and the handset switches to the Music screen automatically (as well as unlocking) whenever I press play/pause. So theoretically it's pretty likely that it's only the media player that will get messed with, but you never know...
So my question is: Is there any way of stopping it from unlocking like this without introducing extra locking/unlocking complications?
hi
im using the Jabra BT3030, that uses A2DP aswel, on my touch pro and my phone stays locked when i start stop use the voice dailing, changing volume or song.
the phone turns on that is true, are u sure u are using the lock function
to realy lock ure phone u have to press and hold the end call button for 2 seconds(lower right button). if that button is not set to lock u can change that in ure phone settings under settings>long press end key there u can chose lock device
i hope this helps, let me know
WildFire
Yeah, I'm using SonyEricsson HBH-DS980, and for me too the phone only turns on upon play/pause etc., but does not unlock.
Have you guys had any problems with receiving/making call using your headests? I have a problem that after a few minutes into a call my headset disconnects, although BT stays on, and I have to restart the headset to re-acquire BT-lock. And it keeps doing this every few minutes. Highly annoying - renders my headset completely useless for phone calls (luckily it still rocks for listening to music).
Mine does the same. Both with my HBH-DS970 and with my HTC BT headphones. I tried the long-press end key lock which works, but prevents me from changing tracks using the HTC headset, yet the volume control works. Weird huh?
I haven't tried the long end key press to lock the device. But thats because I use that for switching on vibrate mode.
Anyone got any other suggestions?
I'm using the motorola S9 too, and my TP doesn't unlock when I press play/pause.
Note that I've installed Answerkeydisabler and Advanced Config Tool and played with locking/screen-off, and may have activate some options leading to this behaviour...
ross
u can always set the long key to "always display the quick list" so u can chose to lock ure device or set ure vibrate ringer
also u can just use the volume keys to change ure ringer to vibrate/sound to
I am now using the quick list so it sort of solves the problem. But it still seems a little awkward compared to just pressing the power button once and not having the a2dp commands reactivating it.
Are we saying that this cant be done?
Any ideas?
Hello, I am loving the sensation and mw600 pairing, however one key function does not seem to work - pressing the 'answer' button on the headset (short press) does not activate voice search. Long press triggers the mw600 device selection, double press triggers a last number redial... When the phone is ringing, short press answers the call successfully in the headset ..... I can hold down the search button on the phone itself successfully and this will activate voice search in the headset...
The key function of activating voice search from the headset itself by pressing the answer button fails.
I have tried workarounds with limited success, such as the headset button app, eg by assigning a double press on the play button to voice search... However I can get no functionality out of the main button itself other than answer and redial... Voice search capability via this button would be truly awesome.
Has anyone experienced this issue and / or any suggestions to make voice search via mw600 button functional?
I'm currently running the EnergyROM from 22nd December and it appears to work for me, though the results were awful - it never dialed the name I said, LOL.
Might be a weird one, but I use both a wired headset and bluetooth headset at times and I would expect the action button on both to do something. All I can get it to do at the moment is redial on a double tap.
What I am looking for is the type of things Windows Phone does. For example, it will read text messages to you, on long press of the button, it will activate voice actions so I can make a call or send a text without looking at the phone.
Is this possible?
Thanks
Hi all,
there's something strange or some I'm missing about this simple function. I'm used to my old Gear Fit functionality that turn off watch screen and vibration if I refuse an incoming call by pressing any phisical button... with GS2 smartwatch is not the same: pressing home button just stop vibrating on incoming call, but screen still remains lit , is it intended and there's any way to let it turn off when incoming call is manually refused?
Thanks all for support.