Related
This is from the pm.dll (powermanager) of 2003se (also applicable for wm5?)
The dword value must be set in
HKLM\System\CurrentControlSet\Control\Power
"SuspendToUnattendedMode"=dword:00000001
What is Unattended Mode? Does it prevent Alarms going off?
Is it a deep sleep mode?
Anybody with a clue?
I also found in my registry (dunno where it comes from after so much messing about) a strange value:
HKLM\System\CurrentControlSet\Control\Power\Timeouts
"BattStandbyPeriod"=dword:00000004
However I cannot find this in any of my rom files. Must be a leftover from
a test with HP power management I guess.
ps: alarms work so much better if
HKLM\System\CurrentControlSet\Control\Power\Timeouts
"ACResumingSuspendTimeout"=dword:0000001E (30 secs)
"BattResumingSuspendTimeout"=dword:0000001E (30 secs)
or even 60 secs.
Cheers
Unattended: This is a confusing state in which the screen, the backlight, and the audio are off. I won't go into too many details, other than to say thatthis is a PocketPC-only state that is used by applications which need to do things without alerting... of the other states.
Click to expand...
Click to collapse
http://blogs.msdn.com/windowsmobile/archive/2005/08/10/450186.aspx
V
Thanks for the info vijay
I can't believe it!!!!
At last!!!
this little "SuspendToUnattendedMode" value is what I've been searching for all over the place for the last couple weeks! This one little edit solves a ton of problems with the buggy WM2003 and WM5 issues, (bluetooth, wifi, missing SDcard, pda freezing on 'off/standby' etc, etc). It's not perfect... it burns the battery like crazy, but at least it allows the pda to function somewhat normal without constant soft resets.
Thanks for sharing this. My device is finally working sufficiently.
Ok people. By now everybody knows that the gps antenna sucks on touch pro or fuze. We have tried almost everything and I have done all the reading and I am so surprised that no one has really solved this but me.
I can get a gps lock in about 3 to 6 seconds all day long. All you have to do is to either disable the manila and have a regular today screen or get the program called second today from xda site (If you like to have the manila 3d stuff on your phone which I do) and once you are done, then install gps today ( get that from geoterrestrial.com).
Once you install the program (ITS FREE PEOPLE) then just set it to auto by clicking on the red rectangle thing on the left side to turn the gps on. The first time will take about a minute or two to lock and once its done, you will be able to get a lock in about 3 to 6 seconds. It is very fast and accurate. It is a good idea to go to its setting and set up everything the first time to make the lock as fast as possible.
By the way you will need to get the plugin version not the full version ( it means that it will be a little plug in on your today screen about 4 icons).
I use this method to get a quick lock and then i turn google map or tomtom on and they work like a charm. If you do a soft reset, it will take longer to get a lock because it doesn't keep any memory.
I have used xda for a long time and thought that I should give something back to my dudes and dudets. Thank you for all your hard work. Ben
If you have it on manual mode, it will not USE ANY BATTERY AT ALL SO DON'T WORRY.
Here is new information for my people. For faster cold fix before using gps today update your quickgps. that will get gps today working in a cold start really fast. thanks
ben1do1 said:
Ok people. By now everybody knows that the gps antenna sucks on touch pro or fuze. We have tried almost everything and I have done all the reading and I am so surprised that no one has really solved this but me.
I can get a gps lock in about 3 to 6 seconds all day long. All you have to do is to either disable the manila and have a regular today screen or get the program called second today from xda site (If you like to have the manila 3d stuff on your phone which I do) and once you are done, then install gps today ( get that from geoterrestrial.com).
Once you install the program (ITS FREE PEOPLE) then just set it to auto by clicking on the red rectangle thing on the left side to turn the gps on. The first time will take about a minute or two to lock and once its done, you will be able to get a lock in about 3 to 6 seconds. It is very fast and accurate. It is a good idea to go to its setting and set up everything the first time to make the lock as fast as possible.
By the way you will need to get the plugin version not the full version ( it means that it will be a little plug in on your today screen about 4 icons).
I use this method to get a quick lock and then i turn google map or tomtom on and they work like a charm. If you do a soft reset, it will take longer to get a lock because it doesn't keep any memory.
I have used xda for a long time and thought that I should give something back to my dudes and dudets. Thank you for all your hard work. Ben
Click to expand...
Click to collapse
I should probably start by saying that I've only had my Touch Pro since Christmas, and am still getting to grips with it, but I've not seen the GPS issues that other people have reported.
Your solution to the problem simply keeps the GPS switched on all the time, and I think this may have a negative impact on battery performance. My wife has a Samsung Omnia i900 which has GPS issues in TomTom which can be fixed by installing GPSGate - however, unless you make it idle while nothing is using GPS, then it will keep the GPS active constantly (like your solution) and she noticed an increase in battery drain.
Cheers,
Steve.
I was concerned about that but even if you do automation off and turn it on manually (this way it will not affect your battery) it will still work flawlessly. I have tried it at least a hundred times over the last 2 months and this is the only way to get the lock fast.
All touch pros have this gps issue and if you try to get a lock with google map or tomtom alone it sometimes take over 5 minutes to get a lock. With my method it only takes a few seconds every time. this is important for people who use their gps all the time to find addresses or sales people on the road who don't want to prey for minutes to get a fast lock. thanks
ben1do1 said:
I was concerned about that but even if you do automation off and turn it on manually (this way it will not affect your battery) it will still work flawlessly. I have tried it at least a hundred times over the last 2 months and this is the only way to get the lock fast.
All touch pros have this gps issue and if you try to get a lock with google map or tomtom alone it sometimes take over 5 minutes to get a lock. With my method it only takes a few seconds every time. this is important for people who use their gps all the time to find addresses or sales people on the road who don't want to prey for minutes to get a fast lock. thanks
Click to expand...
Click to collapse
ok sooooo im not trying to burst your bubble as i would love to have a 3 to 6 sec connect time but if use google maps or tomtom to connect for the first time then close out and open it right back up you will get about the same 3 to 6 second connect time when is what the app does..... sorry
not really, even if you have gotten a lock with google maps or tomtom and you try turning it on a few hours later, sometimes it takes 5 minutes or more to get a lock. There was a time that I had to stand in the street with my phone facing the sky and praying to get a lock and that was embarassing.
In some cases I didn't get a lock at all even after a few minutes since there were some tall buildings around me (downtown los angeles) trust me I have gone through all that and I was going crazy over this issue. I have tried it all because I need the gps lock all day long for my job. The gps today program uses a different method to get a lock. I don't know what it does but whatever it does, it works. thanks
try it ITS FREE. what have you got to loose? you will thank me.
by the way Steve, it does not keep the gps on all the time. It only turns on for a few seconds, gets a lock and turns off (on the auto). thanks
Fair enough - I'm not sure how it would manage to get a lock indoors. I guess I must be lucky though, as I've never had to wait anything like 5 minutes for a lock. I do use QuickGPS, but not AssistedGPS, and don't seem to have to wait very long for a lock at all (if I'm outside).
do you realize what kind of "solution" you give?
you keep GPS always open (you can do that without second today and a GPS today program - you can use GPSGate or keep any GPS program on at all times)
this is dramatic for the battery
this is not a solution, just a bad trick - sorry
I usually get locked in around 15 seconds without turning off anything- I'm using "Automapa 5"- Polish map for mobile devices, works quite fine and locks 10x faster then my hiking GPS (but it's old.. ;p)
Thanks Ben1do1. I just now installed both SecondToday and GPSToday. Your solution works great on my FUZE. Now I can unsubscribe to AT&T Navigator. The only way I used to be able to get TomTom Navigator 6 to get a fix was to run AT&T Navigator (telenav) first.
GPSToday is very configurable and doesn't drain the battery as badly as StevePritchard fears. You can simply disable auto-fix and only do occasional manual quick-fixes just to keep your gps "primed".
below is from the FAQ. http://geoterrestrial.com/faq/
"What does it do to my device's battery life?
In the default configuration, GPSToday will typically reduce your battery life by 10-15% over the course of a day. This much is usually not an issue for the vast majority of users. To have full control over battery consumption, you can disable the automatic periodic quick-fix functionality via Map>Settings. The more frequently you update your fix or run the GPS in persistent mode, the more it will affect battery life."
There you go guys now we are cooking. just turn off the auto and you will not loose any battery. I had sooooo much fun with my gps today and got locks in some cases in 2 seconds. I could not believe my own eyes. Please keep in mind that you need to be outside or close to a big window so that the gps can lock. Enjoy.
I personally think that this thread should be on the wiki and also for the new fuze or diamond owners with the same gps problem. thanks everyone
There's only one way to get a 6 second lock: GPS Hot start. That means that 80% of the birds from the last lock must still be in the sky.
Shephild said:
Thanks Ben1do1. I just now installed both SecondToday and GPSToday. Your solution works great on my FUZE. Now I can unsubscribe to AT&T Navigator. The only way I used to be able to get TomTom Navigator 6 to get a fix was to run AT&T Navigator (telenav) first.
Click to expand...
Click to collapse
did you disable the agps as it would be enabled if you were using at&t navigator... disable it and try tomtom im sure it will work
FYI
FYI - the current version of GPSToday can be installed as *either* a today plugin or standalone app.
i must say that i was sceptic about it but it definitively works for me.
I used to have fixes between 5-10 minuts but with GPStoday i have them nearly instantly, 10-15 sec. Thanks Ben1Do1
Not to cut in but maybe FusionGPSFix can help a little in the same way too.
i cant seem to find the stand alone app... both are today plugs and that's useless in touchflo 3d
I'm beginning to think TouchFlo3D is the problem. I somewhat used what was recommended above. I turned off TF3D and just made a normal today screen in Windows Mobile. I loaded Visual GPS and within less than 10 seconds, I had GPS coordinates. I then turned on TF3D, rebooted (just to make sure everything was cleared out), loaded VisualGPS, it took around 3 1/2 minutes to get a lock. I have repeated these steps several times and every time I do, I almost immediately get VisualGPS to work when TF3D is disable. Someone that knows more about the "internals" of TF3D may can answer this better, but in my testing and troubleshooting that I've done that seems to be the only thing that is making it now work...
erm you are wrong
the first one has a stand alone mode and the second is ONLY in stand alone mode (you don't SEE something happening - it just runs)
After some days trying this the GPSToday Trick i must say it fantastic, really!
before:
first day fix in 5-10 mintutes (AGPS OFF / QGPS ON)
subsequent fixes 3-5 minutes (AGPS OFF / QGPS ON)
with GPS today
first day fix in 20-30 sec (AGPS OFF / QGPS ON)
subsequent fixes 6 seconds (AGPS OFF / QGPS ON)
I don't have the tool always on, i manually turn GPS with this tool whenever i need the GPS.
Try it!
Proven ROM 1.07 + Raphael_Radio_1.08.25.20M1 + GPS Tweaks.cab + GPSTODAY (manual)
Hey all,
Recently i've been having some problems with my emails coming through to my handset. I have the settings set to send/receive every 5 minutes.. but for some reason if my screen is turned off (phone on standby) no email comes through but when i turn my screen back on the emails come.
Has anyone else has this problem? I've never had this problem before it started out of no where...
Which software are you using as your email handler?
The original software that came with the phone.. I havn't installed anything on the phone its at its original state...
jayt2008 said:
Hey all,
Recently i've been having some problems with my emails coming through to my handset. I have the settings set to send/receive every 5 minutes.. but for some reason if my screen is turned off (phone on standby) no email comes through but when i turn my screen back on the emails come.
Has anyone else has this problem? I've never had this problem before it started out of no where...
Click to expand...
Click to collapse
are you using wifi or data connections? If its wifi do you have wifi enabled during standby?
i am using data...like i said if my screen is turned on theres no problems at all but its just when the screen is off in stand by mode no emails will come through..
This is a huuuuge issue which stems from the dawn of WM6. To be honest, it works sporadically for me. A few hours of no email, then a whole group arrives at a time. Sometimes it wont check by itself all day. Other times it will go 1-2 days without missing a beat. This makes it really hard to determine if what I have been doing fixes it.
Here are links to threads I have dug up:
http://forum.xda-developers.com/showthread.php?t=420513
^This is not a good fix imo, as it forces your data connection to be awake 24/7, killing your battery.
http://forum.xda-developers.com/showthread.php?t=437199&page=2
^ I am using the outlook email scheduler. Not sure if its working, or placebo. It still doesnt stick to every 30 mins, sometimes an hour late heh. At least you can have day/night settings and weekend settings. Maybe not a perfect fix, but increases email checking options.
http://forum.xda-developers.com/showthread.php?t=332362
^ Many Kaiser users had/have same problem, no solution found.
http://forum.xda-developers.com/showthread.php?t=445434
^Same problem, no fix in the Blackstone forum.
Thanks everyone for the help.
There has to be some kind of fix out there somewhere.. its unreliable
could try out the seven beta app
If I might make a suggestion...
Maybe you should edit the thread title to "No email in standby" as "Email..." doesn't really tell the story, more people will be likely to find it and post a solution
Problem solved with my Touch Pro
I also had this problem but I found the settings to change this. But you do need schaps advanced config 3 (and a regeditor) to make it happen. Now i always receive my email, it checks every 10 minutes, even in standby mode, with my own data connection.
With a registry editor go to:
HKLM - Comm - ConnMgr - Providers - [GUID] - Connections - [Connection Name] - Always On
and change this value from 0 to 1
(You can also change this setting with Schaps' Advanced Config under menu (right softkey) - More Settings - Connections.
Here you can select "Always On" for the type of data-connection that you use to receive your email)
The second thing is using advanced config and change the setting under power management:
- AC resuming from suspend timeout
- Battery resuming from suspend timeout
I have changed both to 60 seconds.
Now my touch pro is notifying me of new email, even in standby mode.
Good luck
^ by forcing the eternal data connection, are you not killing the battery? I think the phone should be able to connect, query, download emails, disconnect at set intervals while in standby. I think it is supposed to, but for some reason it doesn't do it reliably.
The way I have done it is to use SKSchema to watch for a data connection being connected and turn on the screen when this event happens. This wakes th ephone up and is able to download email. Then I use advance config to close inactive data connection after 10 seconds. As the phone is awake the data disconnects fine. As long as your phones screen is set not to power off quickly, mine is a minute it should be fine.
In the last day I got fed up with TF3D again and turned it off, email seems to check every 30 minutes. I'll let it go for a few days to make sure its not placebo effect.
Anybody here having this problem while manila disabled? Perhaps there is some obscure power saving setting running in the background of manila
Well i have no idea how to fix this problem.. i have played with my phone to try figure it out but nothing.
I will probably have to take rvjacobs advice and see if that works.
It looks like quite a few people are having this same problem.
Its weird.. If my phone is on standby no email comes through..but if its on standby and an SMS comes through, the screen doesnt wake but the email also comes through..
not sure whats happening there.
Mine does it with TF3D disabled also. Thats why I have to use SKSchema to turn the screen on when it detects an internet connection. This way, mail comes through fine and it also auto disconnects the data.
I can now confirm that the issue is still there, regardless of TF3D. Damn, I've tried everything, maybe this is a dead end... Maybe wm 6.5 will see a solution
Maybe it helps you to look for/change the following key:
[HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\Power\Timeouts]
"ACResumingSuspendTimeout"=dword:00000001
"BattResumingSuspendTimeout"=dword:00000001
If you've got these values in the registry, try to cange them to
"dword:0000001e"
It's the time in seconds the device keeps running (without turning on the display) when it's automaticly woke up from the suspend mode (i.e. to look for mails). And if the value is "1", the time might be to short for picking up your emails.
With the new value you set the time up to 30 seconds.
The key exists since WM2003 and most of roms had a higher value in the past. But in the last time more and more roms come with a value of 1. I think its because the manufacturers want to get a good standby time for the devices...
I hope it works for you and you won't have to wait for WM6.5
Thanks for that deroland! I did manage to find them in the reg but it just says "Value Data 1".. doesnt say anything like "dword:00000001"?
I am new to this whole thing so it may be a stupid mistake im making..
jayt2008 said:
Thanks for that deroland! I did manage to find them in the reg but it just says "Value Data 1".. doesnt say anything like "dword:00000001"?
Click to expand...
Click to collapse
Then your value is like "dword:00000001". This is a hexdecimal dword key.
So your device has one second to look for new mails.
Try to change it to "1e" and I hope it will help you.
jayt2008 said:
I am new to this whole thing so it may be a stupid mistake im making..
Click to expand...
Click to collapse
The only stupid thing is that there is no open support by the manufacturers of the devices and microsoft for windows mobile. They only want to make their money ignoring the problem we have by the stuff they sell.
deroland said:
Maybe it helps you to look for/change the following key:
[HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\Power\Timeouts]
"ACResumingSuspendTimeout"=dword:00000001
"BattResumingSuspendTimeout"=dword:00000001
If you've got these values in the registry, try to cange them to
"dword:0000001e"
It's the time in seconds the device keeps running (without turning on the display) when it's automaticly woke up from the suspend mode (i.e. to look for mails). And if the value is "1", the time might be to short for picking up your emails.
With the new value you set the time up to 30 seconds.
The key exists since WM2003 and most of roms had a higher value in the past. But in the last time more and more roms come with a value of 1. I think its because the manufacturers want to get a good standby time for the devices...
I hope it works for you and you won't have to wait for WM6.5
Click to expand...
Click to collapse
This is a setting which can be changed in advanced config, under power. I have mine set to 90 seconds, to no avail. I think this is what is causing it to work sporadically, as opposed to not at all.
So i just got a Samsung i780 and after charging the first battery i put it in and started up the phone.
However i was stunned to find that the standby time was less than 7 hrs!!
Samsung says 400hrs standby, but now ive tried both the batteries that came with the phone and i did an xperiment, by charging the battery to a 100% before i went to bed and then leave the phone in standby.
When i woke up next morning the phone had shut off and couldnt be turned back until i either connected the ext power or replaced the battery.
This goes for both the batteries and the phone is like 2 days old, and no i didnt charge the batteries half way at any point, they were at less than 30% when i recharged them and charged to 100% before i started to use them. :-(
Also i made sure the WiFi wasnt on and i set every powersaving feature to save as much power as possible by lowering the display light to the lowest setting and have it shut off the display after the shortest period of time if the device is not in use etc etc etc...
My old HP Ipaq 6515 with WM 2003 never did anything like this and that one still has a standby time of approx 90hrs, but also the powersaving features in the old WM03 is more simple and apparently works better.
Also, when i start up the Samsung after replacing the battery, i cant change the ldc brightness, nothing happens when i choose another setting, the screen stays at the lowest setting of brightness, until i reset the phone, then it works properly.
My god i thought my old Ipaq was flawed and annoying with its way of suddenly turning itself off now and then due to the batt cover being crap, but this is almost worse!
So plz anyone who has any idea/suggestions, lemme know as this is really getting to me! :-D
Thx in advance!!
Maybe a rom upgrade will solve your problems
ilMessia said:
Maybe a rom upgrade will solve your problems
Click to expand...
Click to collapse
Well it maybe will, but where will i get that?
I go to Samsung and under products i choose my phone model, then i go to "Support and downloads" and theres only a bunch of manuals in pdf and then activesync 4.5 available. :-(
Also i just noticed under the power adjustment theres an option that will shut off the display during a call 5 secs after the call has begun.
However bneneath it it says, that the phone wont shut the disp off unless the phone is in "inactive mode" whatever that means, i havent come accross anything anywhere with a possibility to enable "inactive mode"
S1zZLeR said:
Well it maybe will, but where will i get that?
I go to Samsung and under products i choose my phone model, then i go to "Support and downloads" and theres only a bunch of manuals in pdf and then activesync 4.5 available. :-(
Also i just noticed under the power adjustment theres an option that will shut off the display during a call 5 secs after the call has begun.
However bneneath it it says, that the phone wont shut the disp off unless the phone is in "inactive mode" whatever that means, i havent come accross anything anywhere with a possibility to enable "inactive mode"
Click to expand...
Click to collapse
Inactive mode i think is the one when you press the power button to shout down the display.
You can find a lot of infos about roms searching "i780" on this forum.
ilMessia said:
Inactive mode i think is the one when you press the power button to shout down the display.
You can find a lot of infos about roms searching "i780" on this forum.
Click to expand...
Click to collapse
Thx mate, in that case thats not a problem, i mean the "inactive mode" i always use that, a habit from my old Ipaq which didnt run for too long with the display on. :lol:
I found a rom upgrade to version 6.1, however i could only find it in english, but thatll have to do for now, because whats the "correct" language worth if the device cant stay turned on for more than 4 hrs? ;-)
Geeez this is freaking me out now, i try to do the upg to 6.1 and the upgrader needs to verify the deviee, so it verifies it and alerts me about it and say "Press ok to reset the device", the phone restrts and meanwhilke the upgrader throws this in my face: "Time-out. Unable to access device. Try again".
So i tried again and the same thing happend. Pfffft.... Boohoo!! :lol:
Have you installed the drivers, activesync etc.? Is your battery fully charged?
What drivers? afaik the ain no drivers, but yes i have the Mobile Device center installed and that works perfectly.
As started earlier:
This goes for both the batteries and the phone is like 2 days old, and no i didnt charge the batteries half way at any point, they were at less than 30% when i recharged them and charged to 100% before i started to use them. :-(
Click to expand...
Click to collapse
Hi all,
My father bought an HTC Touch Pro some time ago; I think it was in 2008, as he needed a good phone, with the organization capability that WM has to offer.
The phone is in MINT conditions, really. It still has the original screen protector and no scratches can be found on it. He uses it a lot, but always has it in the leather case, and in a small pocket, which sometimes results in lost calls, as no one can really hear it ring . The battery is always fully charged, and after some testing I think it is still in good conditions.
The problem that he started getting is that after I installed some programs like GPS Tomtom and AGEPhone for SIP calling that he never uses (hehe), he started noticing the battery was discharging faster and that it would not last even 1 day, when before it would last about 3-4 days.
I uninstalled the programs, and the problem persists. Brightness is on 50%, wifi and any internet connection is turned off. No programs running in background, unless it's active sync that sometimes turns on itself.
POSSIBLE CAUSE - We noticed is that he has a lot of reminders, so the phone is constantly waking up. The problem is that it does not go to sleep afterwards. The touch screen is locked, so when a reminder pops up, the screen stays turned on, even if the backlight is not on, and just drains the battery completely.
Is there anything we can do, so that it (the reminders of meetings, birthdays and other stuff) would not wake the device up, or if it did, the phone would go to sleep after some seconds, so that it would not overheat and drain the battery in 1 day?
It is a quite annoying having to constantly look at the phone, dismissing reminders and turning the screen off, so the battery can last a bit longer.
I need to solve this problem, but my father will not agree with a custom ROM flash. Maximum I can do with it is upgrade it through the HTC tool, but I am not sure if it is worth it.
Here are the information:
Version de ROM: 1.90.406.5 FRE
Date de ROM: 08/20/08
Version de radio: 1.02.25.19
Version de protocole: 52.33.25.17W
The device was bought in Luxemburg and has a French windows mobile 6.1 on it, and an AZERTY keyboard.
Please help me with this issue.
Get tBattery and check to see the current draw under stead, idle conditions. With the backlight at 5, it should draw about 110 mA (there may be some spiking). Use the log feature, say for 10 min @ a time, with power-save options unchecked so the screen doesn't dim and it doesn't go to sleep. If the drain is high (constantly above 200 mA, let's say), then get a good task manager (hint: new dotfred's 3.3) and start killing processes, and see if that helps. If not, then try stopping some of ther services.
Thanks Farmer Ted for the reply, but I think I found the cause of the problem. I don't know why but after it wakes up, because of an appointment, it will not turn the screen off, even after 10 minutes and I have the power management set 30 sec off if not being used.
As the screen is locked, the appointment will not be dismissed by accident or pressed so it just stays like that, until the battery is dead.
Is there a hidden option to make the phone go back to sleep, or to prevent it from waking up, just making the led blink, as when you get new SMS messages and the screen is off, or when you get a missed call?
If there was I think it would solve the problem completely.
Thank you all for your help.
yes the problem is the screen it drains it faster than a hobo with a bottle of wiskey,
what you have to do it click on batter icon and get into the battery menu select advanced and elect turn back light off if device is not used for and select 10 second, then turn off device if not used for and slected 1 minute (its reffering to the screen)
then i use a program called touch pro tweak (its cooked into all energy roms) and there is a setting to wake up on call or text or notification and disable it by wake up it refers to turing the screen on
I have a simmilar problem.. I discovered what causes it... When I install certian programs, it changes the power settings.. namely, the power off when not plugged in setting... So, check out those settings... I have had this happen 3 or 4 times in as many months... then I notice the same issues with my battery.. after I go change the settigns back (for the 100th time) it goes back to pastign 2-3 days for me... (instead of less than 1)
Hi people, sorry to bring up this topic again, but I see no point in creating a new one.
I would like to ask if any of you would recommend me a good French ROM (as it comes with AZERTY keyboard) for this device that has good battery life?
Is it possible that a cooked WM 6.5 would use less battery then stock WM 6.1?
I have another problem, is there a way to turn up the ringing volume of the phone, in order to hear it even if it is in a small bag? It's already on max, but my father complaints the ringing volume is too low and he can not hear it.
And last but not least, how much does this battery normally last? Wifi off, bluetooth off, calling about 15 min a day, some SMS and a lot of reminders.
It can not go a day, max two days without recharging. It is always turned off when he goes to sleep, because if not, he will wake up with a dead device.