How can I tell if my phone is cid-locked, I would really like to change the ROM without the risk of bricking it. Has anyone one tried lokiwiz to cidunlock their phone? any advice would be appreciated. BTW I bought the phone from gray market in Hong Kong and is Vodafone branded, do you think it would be locked?
It came preloaded with Dopod Rom, but I don't like it that much. Also what is the best radio rom, the dopod radio rom is a bit weak.
IPL 2.15.0001
SPL 2.15.0001
Rom vs: 2.15.13.27 WWE
Radio: 02.19.21
Protocol version: 4.1.13.09
Ext ROM: 2.15.13.21
Thanks
locked
you are on G4, so yes you are still CID locked.
Normally when you flash your rom you will know imediately when it try to update.
kenxu said:
you are on G4, so yes you are still CID locked.
Normally when you flash your rom you will know imediately when it try to update.
Click to expand...
Click to collapse
so should I try to flash a rom and see what happens? if it goes through without an error it is cid unlocked? if an error pops up it is locked? Should I try this or should I avoid the risks? Any ROM suggestions? Qtek maybe?
Since your phone is G4 chip, i'm pretty sure you are CID locked. Dont worry about the CID locking for now, GOOD ROMS outthere been using different programs to get around CID locking problem. I suggest you can start with PDAMobiz rom from the other thread. REMEMBER USE G4 program not G3 or other programs. or look for any rom that has NoVender CID in the name.
MDA VARIO II with Dopod WM6
I recently bought Tmobile MDA Vario ii with Dopod Wm6. When it boots it shows dopod sign so I think it is dopod. The ROM is 3.54.707.3.
I want to upgrade to Wm6.1 but Tmobile has only official 3.60.xx rom presently available for download. Can I directly flash any Hermis compatible ROM on MDA Vario II.?
Since it has Dopod WM6 the CID lock must have been diabled I suppose. Am I right? and should I directly flash any HERMIS official or extended ROM? what are your suggestions Thanks
Hemant
I don't know enough about the Hermes and flashing to be certain, but I think you'll need to HardSPL (which bypasses bootloader CID checks) before flashing a ROM.
Take a look at the Hermes sub fora before doing anything though...
What is the process for restoring the factory T-Mobile ROM?
I have an T-Mobile SDA which shipped with:
ROM Version 1.0.14.0
Operator Version 1.9.19.16
Radio Version 4.0.13.20_01.09.00
IPL ?
SPL?
First I upgraded to:
ROM Version 2.0.9.0 (Qtek 8300)
Operator Version 2.5.322.1
Radio Version 4.1.13.28_02.61.01
IPL ?
SPL?
Finally, I upgraded to:
ROM Version Windows Mobile 6 for Tornado Perfect English Edition
Operator Version 10.0.0.15341
Radio Version 4.1.13.28_02.61.01
IPL 2.00
SPL 2.00.0008
I have no idea what the SPL/IPL versions were in the original ROM.
I need to return the phone for a swap under warranty (unrelated to flashing)
I have seen conflicting posts about whether or not there was a problem reverting to an older bootloader, etc. Most of the posts seem to be referring to the UK SDA (Typhoon), not the US SDA (Tornado). But they are similar enough that the concerns might be valid.
So the question is... How do I get back the SDA back to "factory fresh?" I have the original T-Mobile ROM. I downloaded it from HTC months ago. Is it as simple as running the original EXE, or will I need to jump through hoops?
Thanks for any help you can give.
dc
Use TyphoonNBFTool and open the nbf file in your original ROM, you will see the versions
The Dopod 577w AKU2 ROM for my Tornado comes with IPL and SPL, so if your ROM comes with it, then it will be patched. Just run the ROMUpgradeUtility.
Here is what TyphoonNbfTool gives me.
So, since it shows IPL and SPL are in the ROM, I don't need to worry about being able to downgrade?
Also. by going from WM6 to WM5, do I need to launch teraterm and "FORMAT BINFS" again?
Hy!
I have my mda vario flashed with wm6, and works ok. But now, I want another version of wm6 rom on my mda vario. My ipl/spl is 3.08.
Question:
Can I just flash it now with another wm6 rom, or I must first downgrade my ipl/spl? Or is there something else what I have to do before flashing my mda vario with another wm6 rom.
Thanks for HELP!
loop12 said:
Hy!
I have my mda vario flashed with wm6, and works ok. But now, I want another version of wm6 rom on my mda vario. My ipl/spl is 3.08.
Question:
Can I just flash it now with another wm6 rom, or I must first downgrade my ipl/spl? Or is there something else what I have to do before flashing my mda vario with another wm6 rom.
Thanks for HELP!
Click to expand...
Click to collapse
always go through the forum and read before posting and starting any thread,this question has been asked and answered 100 of times,if you wud have cared to search read,you must have found your answer,there was no need to start a new thread for this.
As you have already upgraded to wm6 rom and you know the whole method,why than put this question,yes you can upgrade to any wm6 rom.it doesn't matter if you have ipl/spl 3.08,it's just a bootloader upgrade.New roms are cooked without containing any ipl/spl,therefore they do not change any ipl/spl,so any new latest wm6 rom can be flashed,as your device is already cid unlocked and will remain unlocked,good luck
if you are already running wm6, then read the reviews of the other roms and flash away, now choose the rom that would suit you best
You may find it beneficial to back down to one of the official ROMs first though (T-Mo 2.26 US is usually used), to avoid ExtROM corruption. See http://forum.xda-developers.com/showpost.php?p=1579787&postcount=2 for possible ill effects on battery life if you do not.
The T-Mobile Vario III that I have came with SPL v1.56.0000.
I have downloaded the HTC SPL v1.56.0000. Is this the same SPL as the original T-Mobile or will I need a T-Mobile specific SPL?
FishooK said:
The T-Mobile Vario III that I have came with SPL v1.56.0000.
I have downloaded the HTC SPL v1.56.0000. Is this the same SPL as the original T-Mobile or will I need a T-Mobile specific SPL?
Click to expand...
Click to collapse
That will be the one you need.
If you really need the right one, there is a thread on reverting you the OEM SPL. You just extract it from a Dumped ROM.
Ta
Dave
The dumped T-Mobile UK ROM package available here does not have an SPL. Also, there is no downloadable T-Mobile ROM 'upgrade' which contains the SPL.
Would it be possible to dump the SPL from another device? If so, how?
I just tried dumping one and it also doesn't contain the SPL.
Just flash the 1.56 SPL you downloaded.
Ta
Dave
Hey guys,
I'm getting impatient with the release of 6.5 in Australia, so when looking into performing the HARD SPL for my device, what I could find was the details for 1.17 and 1.19.
But my device when I goi in to the tri colour screen is
Code:
MAPL130
SPL - 1.22.0000
MicroP-Maple (LED) v6
ENGID 0x2
PCBID 0x80
PanelInfo 15-0x2
Any help would be great
Help
Hi, I am having the same issue. Splash screen on HTC Snap (Telstra) says SPL 1.22 and I cannot HardSPL with Jocky's 1.17 and 1.19.
I need to hardSPL my unit so I can use other roms. Any help will be appreciated. Thanks.
I am looking to buy this on Telstra myself so would be interested to see this happen - running a generic 6.5 ROM would be cool..... I used to have a Touch Pro so am familiar with flashing the ROM etc but it seems the community is a little smaller for Windows Smartphones.
From the demo I played with at T Life the Telstra branding did not seem that bad (not on shortcuts or anything annoying like that) - just a Bigpond link when scrolling on the homepage. I really liked the trackball too.... will have to think about whether I want to join the dark side (Telstra ) tonight....
I actually find the Telstra Branding really annoying as I can't remove the pre installed programs either such as Foxtel.
So please save me from a 6.5 Telstra Branded Phone!
rsloader said:
I actually find the Telstra Branding really annoying as I can't remove the pre installed programs either such as Foxtel.
So please save me from a 6.5 Telstra Branded Phone!
Click to expand...
Click to collapse
Isn't that just a shortcut icon in the menus? What other branding is there? I want to get one tomorrow but not if branding is that bad
tickford said:
Isn't that just a shortcut icon in the menus? What other branding is there? I want to get one tomorrow but not if branding is that bad
Click to expand...
Click to collapse
Yeah once you have changed the default home screen, they only appear in the menu, but I find it annoying when you need to scroll through them to get to what you actually want to.
But I still would love some help with my problem. As I can't seem to find a solution.
Thanks for that. Hopefully somebody can help us Telstra version folk out
tickford said:
Thanks for that. Hopefully somebody can help us Telstra version folk out
Click to expand...
Click to collapse
Wait for a new HardSPL, that's your only option. It seems that HTC has been busy locking down the base even more. SPL 1.2x also is preventing devices that did successfuly HardSPL from running the new rom upgrades. My hunch is that we'll be seeing a HardSPL 1.24 soon.
Wiz said:
Wait for a new HardSPL, that's your only option. It seems that HTC has been busy locking down the base even more. SPL 1.2x also is preventing devices that did successfuly HardSPL from running the new rom upgrades. My hunch is that we'll be seeing a HardSPL 1.24 soon.
Click to expand...
Click to collapse
Ok then!
Hope you are right!
I think the newer radio version prevents the sspl (jumpspl) from loading, because the radio writeprotects the required memory area. I will develop a test to verify that.
Will Wait
Hi Jocky, waiting eagerly for this. Hopefully we will be able to unlock our devices and use other great roms.
Any updates on this
Asian 6.5 rom also released. Any updates on HardSPL our 1.22 Telstra phones? Cant wait to try new roms.
Wiz said:
Wait for a new HardSPL, that's your only option. It seems that HTC has been busy locking down the base even more. SPL 1.2x also is preventing devices that did successfuly HardSPL from running the new rom upgrades. My hunch is that we'll be seeing a HardSPL 1.24 soon.
Click to expand...
Click to collapse
lol, yeah, you are right! Just got my S521 with the new WM6.5 and it has SPL in version 1.24 flashed...
That's a shame cause I wanted to use a custom ROM since I don't like the HTC modified versions, not on the snap nor on other WM devices. It's just a piece of buggy software that tries to present some eye candy without function. Don't get me wrong, I love eye candy! Therefore I love the new WM6.5.1 Prof. from MS without HTC modifications... but I am getting distracted...
Is there a way to get a custom ROM on my SPL 1.24 Snap or do I have to wait for a hard SPL based on version 1.24?
Thanks!
S*
jockyw2001 said:
I think the newer radio version prevents the sspl (jumpspl) from loading, because the radio writeprotects the required memory area. I will develop a test to verify that.
Click to expand...
Click to collapse
Not sure if it's the radio, maybe. I have a Telstra SNAP and the only way I could bypass it's locks was to use a Goldcard and flash the TMO ROM. Then I could HardSPL it. Seems the Telstra SNAP is heavily security, registry, and software locked. I wasn't able to unlock it without reflashing it.
I'm curious to see if HardSPL 1.24 will allow flashing of the WM 6.5 ROM from HTC.
ookba said:
I'm curious to see if HardSPL 1.24 will allow flashing of the WM 6.5 ROM from HTC.
Click to expand...
Click to collapse
Oh! Me too! Are you planning to have your newest ROM available for 1.24 SPL if it is possible to flash? Would be great if that works!
Hard or Jump SPL flash?
Thanks for the effort! Looking forward to your new ROM!!
Cheers,
S*
Hi! I have spl 1.24.00
I tried to flash the 6.5 rom Build 3VO.2.00.101009, the flash is ok. But after the flash, i had a big problem: if I only reboot the phone, without turn it off, the phone restarts succesfully, but if I turn off the phone, when I turn it on again the phone boots, the w6.5 splash appears, and when the versions indications appear, the phone reboot, and so on.
I had to downgrade to WM 6.5 htc original.
I don't know if this problem depends from the spl or not
Could you help me?
Thank you
Nick
Resolved here: http://forum.xda-developers.com/showthread.php?t=551642&page=54
Bye
Any solution for this...??? Telefonica Snap phones have exactly the same issue
Any solution for this...??? Telefonica Snap phones have exactly the same issue
ookba said:
Not sure if it's the radio, maybe. I have a Telstra SNAP and the only way I could bypass it's locks was to use a Goldcard and flash the TMO ROM. Then I could HardSPL it. Seems the Telstra SNAP is heavily security, registry, and software locked. I wasn't able to unlock it without reflashing it.
I'm curious to see if HardSPL 1.24 will allow flashing of the WM 6.5 ROM from HTC.
Click to expand...
Click to collapse
Telefonica WM6.5 ROM Upgrade for SNAP
okioki telefonica has just released the official wm6.5 rom upgrade (check htc spain support site).
however the download links are broken-
i cannot post the links here, the file is:
UU_Captain_S_Telefonica_2.07.621.2_Radio_Signed_MAPLE_61.36t.25.29U_3.47.25.48m_Ship.exe
hope it helps
http://94.136.51.200/download/RomCo...gned_MAPLE_61.36t.25.29U_3.47.25.48m_Ship.exe