The T-Mobile Vario III that I have came with SPL v1.56.0000.
I have downloaded the HTC SPL v1.56.0000. Is this the same SPL as the original T-Mobile or will I need a T-Mobile specific SPL?
FishooK said:
The T-Mobile Vario III that I have came with SPL v1.56.0000.
I have downloaded the HTC SPL v1.56.0000. Is this the same SPL as the original T-Mobile or will I need a T-Mobile specific SPL?
Click to expand...
Click to collapse
That will be the one you need.
If you really need the right one, there is a thread on reverting you the OEM SPL. You just extract it from a Dumped ROM.
Ta
Dave
The dumped T-Mobile UK ROM package available here does not have an SPL. Also, there is no downloadable T-Mobile ROM 'upgrade' which contains the SPL.
Would it be possible to dump the SPL from another device? If so, how?
I just tried dumping one and it also doesn't contain the SPL.
Just flash the 1.56 SPL you downloaded.
Ta
Dave
Related
How can I tell if my phone is cid-locked, I would really like to change the ROM without the risk of bricking it. Has anyone one tried lokiwiz to cidunlock their phone? any advice would be appreciated. BTW I bought the phone from gray market in Hong Kong and is Vodafone branded, do you think it would be locked?
It came preloaded with Dopod Rom, but I don't like it that much. Also what is the best radio rom, the dopod radio rom is a bit weak.
IPL 2.15.0001
SPL 2.15.0001
Rom vs: 2.15.13.27 WWE
Radio: 02.19.21
Protocol version: 4.1.13.09
Ext ROM: 2.15.13.21
Thanks
locked
you are on G4, so yes you are still CID locked.
Normally when you flash your rom you will know imediately when it try to update.
kenxu said:
you are on G4, so yes you are still CID locked.
Normally when you flash your rom you will know imediately when it try to update.
Click to expand...
Click to collapse
so should I try to flash a rom and see what happens? if it goes through without an error it is cid unlocked? if an error pops up it is locked? Should I try this or should I avoid the risks? Any ROM suggestions? Qtek maybe?
Since your phone is G4 chip, i'm pretty sure you are CID locked. Dont worry about the CID locking for now, GOOD ROMS outthere been using different programs to get around CID locking problem. I suggest you can start with PDAMobiz rom from the other thread. REMEMBER USE G4 program not G3 or other programs. or look for any rom that has NoVender CID in the name.
MDA VARIO II with Dopod WM6
I recently bought Tmobile MDA Vario ii with Dopod Wm6. When it boots it shows dopod sign so I think it is dopod. The ROM is 3.54.707.3.
I want to upgrade to Wm6.1 but Tmobile has only official 3.60.xx rom presently available for download. Can I directly flash any Hermis compatible ROM on MDA Vario II.?
Since it has Dopod WM6 the CID lock must have been diabled I suppose. Am I right? and should I directly flash any HERMIS official or extended ROM? what are your suggestions Thanks
Hemant
I don't know enough about the Hermes and flashing to be certain, but I think you'll need to HardSPL (which bypasses bootloader CID checks) before flashing a ROM.
Take a look at the Hermes sub fora before doing anything though...
Hi,
can anybody help me? I need extract SPL from my ORANGE branded Kaiser (Tytn II).
Is it possible? When i dump the ROM, is possible extract and reconstruct entire ROM, or
OS.nb only? I have new Tytn II and i will backup entire ROM, not only os.nb.
here all requirement... bye
http://forum.xda-developers.com/showthread.php?t=337066
Leon.nr said:
Hi,
can anybody help me? I need extract SPL from my ORANGE branded Kaiser (Tytn II).
Is it possible? When i dump the ROM, is possible extract and reconstruct entire ROM, or
OS.nb only? I have new Tytn II and i will backup entire ROM, not only os.nb.
Click to expand...
Click to collapse
The reconstruction process can be done only for the OS part...
You can't extract the radio or SPL from the device, you need a shipped ROM to get this two parts.
Read this thread http://forum.xda-developers.com/showthread.php?t=335568 to get more info, but as for i know, no Orange shipped ROM is out, so you can't get the original SPL.
Cheers.
Hi,
Does anyone know where I can get the original SPL for my MDA Vario III?
KAIS130
SPL-1.56.0000
CPLD-8
Can I extract this from my T-Mobile ROM?
Thanks
Msuk
msuk said:
Hi,
Does anyone know where I can get the original SPL for my MDA Vario III?
KAIS130
SPL-1.56.0000
CPLD-8
Can I extract this from my T-Mobile ROM?
Thanks
Msuk
Click to expand...
Click to collapse
Check out this thread
http://forum.xda-developers.com/showthread.php?t=335568
Hi,
That thread talks about getting the SPL from the HTC rom, I would like to get it from the T-Mobile ROM.
thanks
Msuk
msuk said:
Hi,
That thread talks about getting the SPL from the HTC rom, I would like to get it from the T-Mobile ROM.
thanks
Msuk
Click to expand...
Click to collapse
It also explains how to extract it from the original rom in the first few steps
If you need the tools they are in kaiser kitchen.
Read the wiki on basic cooking if you are unsure how each of these tools work.
Hi,
The problem is I dont have the original T-Mobile Vario III ROM, T-Mobile never released it. There are constructed ROM would those have the correct SPL?
Thanks
Msuk
aruppenthal said:
It also explains how to extract it from the original rom in the first few steps
Click to expand...
Click to collapse
yes u can Extract from your T- Mobile Rom
just follow instructions in that thread using your t, mobile rom.
msuk said:
Hi,
The problem is I dont have the original T-Mobile Vario III ROM, T-Mobile never released it. There are constructed ROM would those have the correct SPL?
Thanks
Msuk
Click to expand...
Click to collapse
Typically a cooked rom will not have a spl with it. Ill take a quick look and see if i can locate it. Do you know the number of the spl you need?
I am fairly sure there would still be a dump of the original rom around even of Tmo never released it.
Hi again.
Here are the details when I put the phone into bootloader mode
KAIS130
SPL-1.56.0000
CPLD-8
Thanks
Msuk
aruppenthal said:
Typically a cooked rom will not have a spl with it. Ill take a quick look and see if i can locate it. Do you know the number of the spl you need?
Click to expand...
Click to collapse
msuk said:
Hi again.
Here are the details when I put the phone into bootloader mode
KAIS130
SPL-1.56.0000
CPLD-8
Thanks
Msuk
Click to expand...
Click to collapse
Duh im dumb that was in your original post lol. Do you still have the stock rom on your phone? If so I can direct you to a thread that has the 1.56 spl posted.
Hi
I have access to a friends Vario III running the original ROM.
I am currently running the HTC WM6.1 ROM
Thanks
Msuk
aruppenthal said:
Duh im dumb that was in your original post lol. Do you still have the stock rom on your phone? If so I can direct you to a thread that has the 1.56 spl posted.
Click to expand...
Click to collapse
msuk said:
Hi
I have access to a friends Vario III running the original ROM.
I am currently running the HTC WM6.1 ROM
Thanks
Msuk
Click to expand...
Click to collapse
From what ive read the the shipped vario WM 6 rom has the same spl as the original shipped HTC rom. Do a quick search for "MDA vario III spl" and you will see the results I did. The original 6.0 ship was 1.56 and the new HTC 6.1 spl is 3.28
Both spls are available on the forum already extracted.
Just remember switching spls that you must still flash hardspl to flash a new rom. You can revert to the matching stock spl after flashing.
So the original HTC WM6.0 has SPL 1.56? I can simply extracted it from that?
Thanks
Msuk
aruppenthal said:
From what ive read the the shipped vario WM 6 rom has the same spl as the original shipped HTC rom. Do a quick search for "MDA vario III spl" and you will see the results I did. The original 6.0 ship was 1.56 and the new HTC 6.1 spl is 3.28
Both spls are available on the forum already extracted.
Just remember switching spls that you must still flash hardspl to flash a new rom. You can revert to the matching stock spl after flashing.
Click to expand...
Click to collapse
Hi again,
Is there already a setup package that installs this SPL?
Thanks
Msk
msuk said:
Hi again,
Is there already a setup package that installs this SPL?
Thanks
Msk
Click to expand...
Click to collapse
Yes you need to download SPL 1.56 its in the first link i gave u
Download SSPL_kais.exe its in the first link i gave u
Put SSPL_kais.exe on device and run
when it gets to tricolor unplug and replug usb
flash spl
your back to stock
Just remember to go back to hardSPL prior to flashing anything.
Are you reverting to WM6? I ask since 1.56 is what you have on you device now.
I am currently running HTC WM6.1 but need to put the T-mob ROM back on. I was going to flash the T-Mobile Reconstructed ROM and then flash the SPL back on . Is this the correct way?
Thanks
Msuk
aruppenthal said:
Yes you need to download SPL 1.56 its in the first link i gave u
Download SSPL_kais.exe its in the first link i gave u
Put SSPL_kais.exe on device and run
when it gets to tricolor unplug and replug usb
flash spl
your back to stock
Just remember to go back to hardSPL prior to flashing anything.
Are you reverting to WM6? I ask since 1.56 is what you have on you device now.
Click to expand...
Click to collapse
msuk said:
I am currently running HTC WM6.1 but need to put the T-mob ROM back on. I was going to flash the T-Mobile Reconstructed ROM and then flash the SPL back on . Is this the correct way?
Thanks
Msuk
Click to expand...
Click to collapse
That should do the trick. You should flash Hardspl prior to flashing the new rom, since you have a stockspl on now. Then flash the spl back on after you get the rom on.
Thank you very much for your help
aruppenthal said:
That should do the trick. You should flash Hardspl prior to flashing the new rom, since you have a stockspl on now. Then flash the spl back on after you get the rom on.
Click to expand...
Click to collapse
Hi Community,
my mda vario III (HTC Kaiser) is an waranty case and i badly need the original rom incl all, this one in the forum is only the OS without radio spl and so on.
best regards
HT
I also needed it, bust just installed the OS and a working Radio.
T-Mobile does not even care what is installed, i guess they don't even startup the device but send it straight back to HTC. I switched about 20 T-Mobile HTC Devices and it worked everytime to just install the OS and a working Radio.
If you know the Radio and OEM SPL version you can probably get them from this site somewhere. They dont have to be extracted from the Dumped Shipped ROM.
Ta
Dave
DaveShaw said:
If you know the Radio and OEM SPL version you can probably get them from this site somewhere. They dont have to be extracted from the Dumped Shipped ROM.
Ta
Dave
Click to expand...
Click to collapse
thats teh problem i dont know them :-(
Ah, Just have to see if anyone knows the OEM SPL and Radio versions.
Does it have to be WM6 or Wm6.1 Versoin, or are you not bothered. I don't think anyone will care so long as it is a T Mob stock version.
Ta
Dave
WM 6.1 T-Mobile German
You can download the latest German ROM from the T-Mobile website
http://www.t-mobile.de/fremdcontent/1,2790,123254,00.html
Hello,
maybe my question is simple to answer, but I've found nothing with der search-function.
IF I flash HardSPL (for a new 6.1 ROM) and in the future I want back to the original ROM and original SPL (T-Mobile SPL 1.56), who can I do this If I have no original ROM from T-Mobile Austria (because Austria do not have this on the download page).
I'm right that in the reconstructed ROM from e.g.
http://forum.xda-developers.com/showthread.php?t=337066&highlight=reconstructed+kaiser+rom
ther is no SPL included? Is this right?
How can I flash the original SPL back? can I use any original ROM from WM6 which has SPL 1.56 even it's not from Austria (CID lock activated)
Regards
Anton
bobble said:
Hello,
maybe my question is simple to answer, but I've found nothing with der search-function.
IF I flash HardSPL (for a new 6.1 ROM) and in the future I want back to the original ROM and original SPL (T-Mobile SPL 1.56), who can I do this If I have no original ROM from T-Mobile Austria (because Austria do not have this on the download page).
I'm right that in the reconstructed ROM from e.g.
http://forum.xda-developers.com/showthread.php?t=337066&highlight=reconstructed+kaiser+rom
ther is no SPL included? Is this right?
How can I flash the original SPL back? can I use any original ROM from WM6 which has SPL 1.56 even it's not from Austria (CID lock activated)
Regards
Anton
Click to expand...
Click to collapse
Any 1.56 SPL will be fine, they are all the same
As for the CID, flashing the stock SPL doesn't change the CID back, you'll have to findout what the CID is for T-Mob Austria and then set it with Olipro's ATCommander, with the [email protected]=HTC___01 command where HTC___01 is the CID.
Ta
Dave
DaveShaw said:
Any 1.56 SPL will be fine, they are all the same
As for the CID, flashing the stock SPL doesn't change the CID back, you'll have to findout what the CID is for T-Mob Austria and then set it with Olipro's ATCommander, with the [email protected]=HTC___01 command where HTC___01 is the CID.
Ta
Dave
Click to expand...
Click to collapse
To find CID, I can do this with mtty and task 32, correct?
bobble said:
To find CID, I can do this with mtty and task 32, correct?
Click to expand...
Click to collapse
The command for mtty is info 2
if will return something like this HTCSCWS__001Ùü¤HHTCE, the Red text is the CID.
Or use ATCommander to issue a [email protected]? command
Ta
Dave
Perfect, I find it, thanks.
The way back is now open ;-)
Regards
Bobble