Hi Guys,
In Australia, on 3 network, with a TyTn II.
Have played around, and cooked my own ROM, and installed. All seems to be working over the last month or so.
However, about 2 weeks ago, I tried a video call and it didnt work.
When I instigate a video call, it connects as a voice call only.
If someone does a video call to me, it goes to message bank.
So, when I cook a ROM, do I need to add any software to get video calls?
Could the problem be the radio? That is, do all radios support video calling?
Any ideas??
Related
Hey Guys,
I have an issue with my Fuze and am hoping there is a simple setting that may help me out.
I have an Xlink Bluetooth gateway in my home, and have a Jag XK with bluetooth. Previously I had an 8525 where the bluetooth worked well.
I got the Fuze and I thought all was well. But for the last week, when I get an incoming call the blue tooth rings (houseline on XLink or XK Radio), but when I connect the call I get dead silence.
I can make outgoing calls via bluetooth and both devices work fine.
On the Fuze, if when ringing i hit answer on the phone, rather than the car stereo occassionally it connects.
Since I have the same issues (silent connection) when connecting via Xlink or XK I figured it must be an issue with the phone.
Any thoughts or ideas ?
Thanks
Dave
The issue is with Voice Command not with phone. If you update Voice Command to 1.6.19209 it will fix your issue. The other option is to turn off Announce incoming Calls option.
Update Voice Command
The phone has version 1.6.19971 --- So that would be a downgrade not an upgrade....
Does that still make sense ?
Dave
You've tested that specific version and it works? NATF said he tried his version from his Tilt and it didn't work. Please confirm!
Nice work!
You guys are really on it! I started noticing this problem today after enabling 'announce incoming calls' yesterday... didn't even occur to me. So I disabled it as per your suggestion, and it's working fine. Thanks very much for that. If I wanted to roll back to that earlier version, where could I find it? I still have my Tilt which I upgraded to 6.1 (battery's probably dead)... could I get the .cab off of it? Do we know for certain the earlier version works? Thanks again.
We were on it for a long time. You'll see multiple posts about that.
Hello,my girlfriend has just purchased a used polaris with a cooked rom,the problem is that the dialler hasn't the selection for video calls,Also when she has an incoming video call the backlight is open but no answering choice is appeared,thus cannot make or receive video calls.Have you any solution?
thanks.
Does your network provider support 3G, that's my only guess. As you need a 3G network to be able to Video Call, if not, maybe try flashing a new cooked rom onto the phone.
Also make sure your dialler supports video calls, just do a search for 3g dialler or video dialler.
Lokosis said:
Does your network provider support 3G, that's my only guess. As you need a 3G network to be able to Video Call, if not, maybe try flashing a new cooked rom onto the phone.
Click to expand...
Click to collapse
Yes my operator support 3g video calls,the point is that dialler not appeared the choice for video call.I will try to find another dialler, have you something in your mind?
I never use video but you could try here http://forum.xda-developers.com/showthread.php?t=489409&highlight=video+dialer for a list of 3g dialers
i'm using c_shekar rom and have a same problem, and also my device detected as if it has no built in cam, but the camera can take photos or videos for sure
Hi all,
couple of weeks ago I upgrader my XDA II Mini with cotulla rom, and the OS work fine, with additional fix and updates, but later on i noticed that during when there's incoming call during a conversation, it only rang once and then it goes as missed call, anyone have experience with this ?
hi folks, my virgin post to this almighty forum is as below...
I'm using an ancient recording software audionotes 1.32 with my HD. all good except that, sometimes after recording (not an in-call one) the other party in a phone call cannot hear my voice no matter incoming or outgoing, i have a clear reception though. a soft reset will bring it back.
I couldn't identify exactly how it happend. after a few tries, here's my guess. it appears after a short duration of recording, say minutes, the phone calls are not affected. however, for a long duration as i used to record a conference, it's glitchy.
I'm pretty sure it's not a rom or device dependent thing because it occurs with my HD and P800/P3600i and various ROMs etc. my setting of audionotes is, screen is not turned off/no phone call auto-recording/recording stored in device
please anyone got a clue or someone proves mine is not an isolated case?
cheers!
Ye
Hi,
Is there any way to add 'network' video calling to an HTC Sensation?
I can Skype and use other third party software apps to video call over the internet but I was curious to know if I can add something to add a network video call to my Sensation to make video calls straight over the network?
My mate's S2 can video call and on occasion I'd like to call them without having to use Skype as at the moment I have to call him, tell him to turn on Skype then recall on Skype to make a video call.
Thanks
It would help to know what carrier and ROM you are using and if your phone is rooted or not.
HTC Sensation on Three UK, rooted handset, leaked HTC ICS ROM.
Thanks
Guessing that's a 'NO' then