Related
Hi,
I have noticed that I am no longer able to answer incoming calls via the Samsung HeadSet (I mean the cable headset that comes with the I-600). When an incoming call arrives and I push the button on the cable of the headset, the light goes on, but that's it.
I have done a hard-reset and voila: the headset could answer incoming calls again!
After having re-installed all my programs, the headset again does not accept the calls.
As I have so many programs on my I-600 it does not make sense to name them all. But does this ring a bell with any of you experts? Maybe someone encountered the same problem and found a solution?
Does any known program interact with that call acceptance button? Any registry entries I should change?
TIA for your help!
hi there I have the same problem too
I haven't found the hack but I just got the following ideas:
in the stettings activate the any key answer
and if it doesn't work again try with using auto answer function
I can't test now on my i600
BTW among your programs is there anything like flash get (download manager), 3D games, office editing application?
yes, I have Documents To Go and S-Tris 2
But the answer with any key and/or auto-answer option is no real solution
But still thanks for your input.
Maybe anyone else can come up with an idea?
TIA
Does anyone know if the Kaiser is working with MSVC? I really am mainly looking for the caller's name feature...
Anyone?
inneyeseakay said:
Does anyone know if the Kaiser is working with MSVC? I really am mainly looking for the caller's name feature...
Anyone?
Click to expand...
Click to collapse
I have not experimented with this as of yet....but I will as soon as my phone is done flashing.
inneyeseakay said:
Does anyone know if the Kaiser is working with MSVC? I really am mainly looking for the caller's name feature...
Anyone?
Click to expand...
Click to collapse
It works....it requires replacing some files, you'll find it on a search
did you get the names read out when people call ok? Any tips?
This is a feature of the nokia phones which i'd like on my wm device
There's a cab listed somewhere around here for the MSVC1.6 install that doesn't require any file changing. It just works. Of course you do need to soft reset after the install to get to the VC settings so you can turn on call announce. You'll probably also want to change your button mappings. The cab remaps the PIE button by default.
jarek91 said:
There's a cab listed somewhere around here for the MSVC1.6 install that doesn't require any file changing. It just works. Of course you do need to soft reset after the install to get to the VC settings so you can turn on call announce. You'll probably also want to change your button mappings. The cab remaps the PIE button by default.
Click to expand...
Click to collapse
I didn't have to use a cab with Dutty's 6.1 just changed the Settings in Voice Command to Announce Calls and SR and poof it worked. No swapping of files or reg hacks needed. I did have to do it with all the 6.0 roms however.
It's working for me as well, and nothing extra was done. stereo BT headset from jabra.... sweet!
MC VC v1.6.17913 woks flawlessly....google is your best friend...
It's working for me EXCEPT that it doesn't announce incoming calls. I have the Jawbone BT earpiece that's excellent as far as reception and vocal quality. The BT earpiece rings as normal, but there's no voice letting me know there's a call coming in. I have the AT&T Tilt.
Any ideas what could be wrong? I have the VC settings set to "Announce thought the Bluetooth only" so that I make sure it's correct.
I wonder if it's an AT&T thing? Hopefully not since I can announce the outgoing call name and it works fine.
I'm confused...
maiahsdad said:
It's working for me EXCEPT that it doesn't announce incoming calls. I have the Jawbone BT earpiece that's excellent as far as reception and vocal quality. The BT earpiece rings as normal, but there's no voice letting me know there's a call coming in. I have the AT&T Tilt.
Any ideas what could be wrong? I have the VC settings set to "Announce thought the Bluetooth only" so that I make sure it's correct.
I wonder if it's an AT&T thing? Hopefully not since I can announce the outgoing call name and it works fine.
I'm confused...
Click to expand...
Click to collapse
You need the latest version (at least one of the later builds). The older ones don't announce properly.
speakerphone!
maiahsdad said:
It's working for me EXCEPT that it doesn't announce incoming calls. I have the Jawbone BT earpiece that's excellent as far as reception and vocal quality. The BT earpiece rings as normal, but there's no voice letting me know there's a call coming in. I have the AT&T Tilt.
Any ideas what could be wrong? I have the VC settings set to "Announce thought the Bluetooth only" so that I make sure it's correct.
I wonder if it's an AT&T thing? Hopefully not since I can announce the outgoing call name and it works fine.
I'm confused...
Click to expand...
Click to collapse
I thinkj he means announcement through speakerphone not bluetooth!!
maiahsdad said:
It's working for me EXCEPT that it doesn't announce incoming calls. I have the Jawbone BT earpiece that's excellent as far as reception and vocal quality. The BT earpiece rings as normal, but there's no voice letting me know there's a call coming in. I have the AT&T Tilt.
Any ideas what could be wrong? I have the VC settings set to "Announce thought the Bluetooth only" so that I make sure it's correct.
I wonder if it's an AT&T thing? Hopefully not since I can announce the outgoing call name and it works fine.
I'm confused...
Click to expand...
Click to collapse
Go into MSVC and select PHONE > OPTIONS > Announce Incoming Calls. This is where most people have problems. They don't realize you can highlight the item beside the check box and, in some cases, the OPTIONS box will be selectable. This also works for the Calendar to announce reminders.
thanks. I did some soft resers and it started to respond with announcing calls.... depending....
If I don't have the phone on "ring", the calls won't be announced. I can hear the BT earpiece become activated, but no call is announced. BUT, if I turn the ringer ON, then I can hear the announcement through the BT. I have set it to announce via BT only. When I am in meetings, I really don't want my phone to ring, but would still like to hear the call announced. When I downloaded this from Microsoft, I was told that it would still "whisper" the call. Well it's whispering too darn low! Like none at all!
Any ideas?
Quiet sound...
maiahsdad said:
thanks. I did some soft resers and it started to respond with announcing calls.... depending....
If I don't have the phone on "ring", the calls won't be announced. I can hear the BT earpiece become activated, but no call is announced. BUT, if I turn the ringer ON, then I can hear the announcement through the BT. I have set it to announce via BT only. When I am in meetings, I really don't want my phone to ring, but would still like to hear the call announced. When I downloaded this from Microsoft, I was told that it would still "whisper" the call. Well it's whispering too darn low! Like none at all!
Any ideas?
Click to expand...
Click to collapse
Have an sound file that is quiet. Switch to the quiet sound file for the ringer while in meetings. The announcement will come over your headset just fine. The only problem is when you have a contact with their own ring tone set.
Works for me. MSVC is just great for me. Voice commander is too flakey and depends on your pitch.
good luck!
tomsenna said:
Have an sound file that is quiet. Switch to the quiet sound file for the ringer while in meetings. The announcement will come over your headset just fine. The only problem is when you have a contact with their own ring tone set.
Works for me. MSVC is just great for me. Voice commander is too flakey and depends on your pitch.
good luck!
Click to expand...
Click to collapse
Thanks. I actually have MSVC 6.1 . where can I find out how to make a silent sound file? Or, is there onw somewhere that I can download it now?
Thanks for any and all help.
If you've chosen to have calls announced over BT only, then it will only ring thru you BT headset and NOT the device speaker. It is true that setting your ringer to vibrate doesn't work, but you shouldn't have to do this if your BT headset is turned on since there shouldn't be any sound coming from the device speaker.
Delta_flyer said:
If you've chosen to have calls announced over BT only, then it will only ring thru you BT headset and NOT the device speaker. It is true that setting your ringer to vibrate doesn't work, but you shouldn't have to do this if your BT headset is turned on since there shouldn't be any sound coming from the device speaker.
Click to expand...
Click to collapse
Thanks, I will try that setting. But the reason I turned it off was because it rang out loud. I'll turn the settings back on and try that with someone calling me OUT of a meeting. Next, should it announce the incoming text messages as well? I notice that this doesn't happen.
jjh430275 said:
MC VC v1.6.17913 woks flawlessly....google is your best friend...
Click to expand...
Click to collapse
Hi all,
I ame looking for that stuff too.
I have the thuffir V6b rom and MSVC 1.60.4622
It was working fine on IPAQ 6915 WM5; but with the Kayser WM6.0 rom I don't have the call annoncement working (through speaker as well as bt).
I tried some file replacement, but MSVC refuse to start after all; I need to reinstall it!
The big thing is that I use a frech MSVC!!!!
Anybody has a clue to make it work?!
Or, if it is supposed to work with a WM6.1, which 6.1 french rom can I install?
VC 1.6 using a headset
Voice command's announcements are dependent on the announcements volume, not the ringer volume (the two options when you click on the sound icon on the top bar). Therefore, if you don't want it to ring but do want the announcement, set the ringer to "vibrate" in the phone options but leave the announcements volume on - instead of selecting "Vibrate" on the sound icon.
This works great for me in the office environment. I also use the Notification Option: Announce notifications using Bluetooth hands free if available" to provide the ringtone when I am driving or otherwise have the ringer set to "Ring" in the phone options, and I get both the custom ringtone (if set) and the caller's name announced.
Dean
ATT 8900 No Camera
Delta_flyer said:
Go into MSVC and select PHONE > OPTIONS > Announce Incoming Calls. This is where most people have problems. They don't realize you can highlight the item beside the check box and, in some cases, the OPTIONS box will be selectable. This also works for the Calendar to announce reminders.
Click to expand...
Click to collapse
Thank You Very Much
I just started using the phone (with original ROM) in Rogers/Fido network in Toronto, and I have been getting on and off calls going straight to voice mail without the phone ever ringing (no missed call notification by the phone).
Anyone else having the problem? Is it related to the phone going to deep sleep state or polling frequency? Any tweaks or registry editing which would reduce the chance of that?
This is a serious problem for me, as I need reliability. I don't mind giving up some battery performance to correct it.
I may trying updating the GSM Radio. Will it make any difference? As I understand, updating GSM Radio only should not erase all the programs like updating OS ROM does, am I correct? I would back up before doing so.
Sorry to state the obvious, but did you accidentally set your phone to forward all calls to voicemail in setting?
sonus said:
Sorry to state the obvious, but did you accidentally set your phone to forward all calls to voicemail in setting?
Click to expand...
Click to collapse
No. And this does not happen all the time. If I make a call from the phone, then it can start to receive calls without any problem. It just happens at random. And when it happens, repeated calls will all go straight to voice mail.
And I have disabled the no answer forwarding, so it should keep ringing until the caller hangs up.
hey -
first, I'd like to say these forums are awesome! thanks for the great info.
But i am having the 'straight-to-voice mail' problem with my TC too. It doesn't happen every time, but every once and a while i get a voice mail indicator, but the phone never rang. My girlfriend actually called me 3 times in a row, 2 of which went right to mail, the third one rang. odd. So if anyone has any ideas, i would appreciate it!
Edit: I am also on Fido in Toronto. I have been looking around, and there is the suggestion that perhaps this is a problem with the 'Who Called' or 'Name display' features of voicemail, which doesnt work well with some phones. Now i am not sure if this is it - but i upgraded my VM at the same time I got the TC. Another suggestion has been that the Radio Rom doesnt work well with some netorks. Can anyone confirm/deny this? Any other ideas?
hmm - anything new on this?
For me, my workaround solution is to disable 3G - network settings changed to "GSM" instead of "Auto". Now, the calls have been very reliable with no straight to voice mail problem.
So it looks like there are some incompatibility issues with my 1.58.21.23 Radio ROM and Rogers/Fido network/3G. But I don't know where to look for a better radio ROM (other than loading everything for trial and errors).
And which radio ROM is compatible with Polaris? Only those made for Polaris or the same class of phones? It is rumored that Rogers would release Kaiser very soon, so I presume that Kaiser's Radio ROM (not OS obviously) should be compatible?
aww...i really hope it's not 3G - i guess i might as well cancel that data plan Anyway, I've disabled it, so we shall see if it remedies the problem.
Edit: for those of you who are having the same problem and want to disable 3G but still want to be able to use 3G data every once and a while, I have installed Schap's Advanced Configuration too (which is awesome, btw, and can be found by searching the forums). It has a handy feature that permits you to add 3G on/off to the comm. manager, which makes switching between GSM and 3G really easy. Just thought I'd share.
Just grabbed this thread out and update it here:
Seems the problem does not depend mandatory on using 3G or GPRS
and also not depending on the Radio version. I have noticed missed
calls with enabled 3G and with GPRS only. And I have noticed them
with Radio 1.58.23.21 and with 1.64.08.21 on bepe WM6.1 0.64 GER.
I also have a friend who confirmed he noticed missed calls on stock
WM6.0 GER from O2 germany with stock Radio 1.58.23.21. Its annoying!!
I had the same problems with my old Hermes (TyTN 1) with all ROMs
and all Radio versions also. It's a pity to seem the problem persist on
the Polaris I mean, hey, the TC is some kind of phone, isn't it?
And the main task for a phone is being able to receive a call if radio
reception is OK. Never had a standalone phone, which suffered such
problems...
Olioaglio
Hi everyone, I have been having the exact same problem on my Cruise (and no, my phone is not set to forward to voice mail). It's very odd since it seems to happen randomly. I found it resolves temporarily if i make a call then hang up.
Can anyone follow-up if switching to "GSM" instead of "Auto" resolves the issue. This has become a serious problem for me and would appreciate any help. Thanks!
UPDATE: after several days of testing, i am happy to say that i have not had any problems since swithching to GSM
Mine is not doing the same in Vancouver.bc Fido.
I've tried multiple radio roms and am gradually working my way down the list from newest to oldest. so far no difference.
Any other ideas?
sorry to resurrect an old threat.
I asked this in the Raphael Software area, but I'm posting it here as it really isn't a software that someone made..
OK, I'm pretty sure BT worked on the phone. Now, any time I answer from a BT device, the incoming caller is muted. He can hear me, I can't hear him.
If I transfer the caller to the phone (which btw I can hear him on the phone) and back again to the BT device, I can then hear him. If I answer the incoming call from the phone buttons, I can hear the caller on my BT device.
I must've spent like 30 calls to my phone (I'm ticked as I'm sure each one counted on my minutes) thinking of different ways to fix this.
I thought it was my BT headset, but it works on my Tilt. So I tried it in my car BT. It can't hear the caller either. So something is wrong.
Here's how I COULD fix it:
If I turn off MS Voice Command "announce incoming calls" my phone itself will play my ringtone while I hear a beep tone in my BT earpiece. If I answer it form my headset, it works!
UPDATE:
I had my unit bloat free by following the "How to skip the bloat! (Fuze)" thread. I did another HARDREST and did the same bloatfree. Right off the bat, I synced my BT and I can't hear the incoming caller. Something is messed up.
One other person has this issue so far. Can anybody else check it? Voice Command is one of the best things there is for this phone. Just make sure its checked to announce incoming calls. Don't worry if you don't hear the incoming call being announced(you might hear a bell sound behind your normal ringtone) as thats a different issue you'll get untill you patch it. Just answer the call from the headset and see if you can hear the incoming caller.
Same Deal
I'm having the same problem. I just unchecked the 'announce incoming calls' and we'll see how that works. I'm on a work conference call so I can't try it till later.
it should work with it unchecked, but that defeats one of the best features on the voice command. Another thing, if you have ring&vibrate set, it you uncheck that feature, the phone will ring and vibrate. so other people around you will know your phone is ringing. In a library, I liked to use the announce feature because my ear piece would ring but the phone would only vibrate.
Here is what worked for me today -and I have been on the verge of sending the phone back to ATT...
1. I deleted all my pairings
2. I paired my JawBone2 first
3. Then, I paired my Plantronics A2DP thing (I had paired this one first before because I had it with me when the phone arrived in the office).
Funny thing: First time I paired my Plantronics 855 I got 2 options under "Advanced" at the end of the pairing procedure: 1. "Stereo Headset" 2. "Handsfree" I checked both. When I re-paired (after pairing with the JB2) I only got the "Stereo" option (which I checked). So now, all works fine. I can hear folks at the other end on either headset (actually, I have added a V1 as well) regardless of whether I or they initiated the call.
We'll see what the future brings here. But, for today, this is working.
I tried hard resets. Still no go.grrr... I dunno about you, but it just drains me to redo all my contracts and settings on the phone after every hardreset.
Hopefully your BT will stay working. Someone else here reported that it worked then stoped working after a while.
I have the same issue called HTC support last week and they where able to replicate this issue. If more people call HTC they may fix this problem faster.
I called ATT about it. Not aware. Of course they tried it and worked. It seems to be random on when it quits working. I know mine worked for a while. I just don't know what caused it to quit. And now that it did quit working, I can't get it to transmit the incoming caller to my BT. He can hear me though.
If it wasn't an hour job to restore it back to the way it was, I would hard reset it again. Tired to that at the moment.
I'm having the same issues on my Fuze. I unchecked 'announce incoming caller' and now it works just like my previous phone. My question is, what does announce incoming call actually do? Is it supposed to say who is calling through the bluetooth headset?
I too have this issue in my car (I haven't tried it yet with regular headsets, but I imagine the result would be the same). I have made the tweaks to the registry to get the Fuze to announce incoming calls, but the announcement is so soft, I can hardly hear it. I also have the issue of not being able to hear the person calling me (outgoing calls are fine).
I just did some experimenting and was wondering if others can duplicate this.
With Announce incoming calls on, when a call comes in and you answer it with the button on the headset (or the answer button in the car), you can't hear the person on the other end even though they can hear you.
Now try having an incoming call answered by hitting the Answer button on the phone itself (I only tried it with the on-screen Answer button, I didn't try it with the phone's hard button). You can now hear the person on the other end and they hear you. I was able to duplicate this numerous times.
Same issues...
With Announce Caller on in Voice Command, I cannot hear the caller if answering via the bluetooth headset. I'm not even sure it's is announcing the caller, but the custom ringtone is playing. If during the call you switch off the handsfree (via phone menu), then turn it back on, you can once again hear the caller.
If I turn off the Announce Caller function in Voice Command, I only get beeps in the headset, but I can hear the caller.
AT&T Fuze
Yes. I'll say the callers name if its in your contacts, or it'll say the phone number if it isn't. real helpful if you don't want to take out your phone.
DaRealGMan said:
I'm having the same issues on my Fuze. I unchecked 'announce incoming caller' and now it works just like my previous phone. My question is, what does announce incoming call actually do? Is it supposed to say who is calling through the bluetooth headset?
Click to expand...
Click to collapse
Err isn't that was I said in the original post? I mean about how its answering from the BT device that causes the incoming caller to be muted.
jglev said:
I too have this issue in my car (I haven't tried it yet with regular headsets, but I imagine the result would be the same). I have made the tweaks to the registry to get the Fuze to announce incoming calls, but the announcement is so soft, I can hardly hear it. I also have the issue of not being able to hear the person calling me (outgoing calls are fine).
I just did some experimenting and was wondering if others can duplicate this.
With Announce incoming calls on, when a call comes in and you answer it with the button on the headset (or the answer button in the car), you can't hear the person on the other end even though they can hear you.
Now try having an incoming call answered by hitting the Answer button on the phone itself (I only tried it with the on-screen Answer button, I didn't try it with the phone's hard button). You can now hear the person on the other end and they hear you. I was able to duplicate this numerous times.
Click to expand...
Click to collapse
Yup. That's the issue. It's only if you have VC to announce the incoming caller on, and you answer the the incoming call from the BT device.
DerralVL said:
With Announce Caller on in Voice Command, I cannot hear the caller if answering via the bluetooth headset. I'm not even sure it's is announcing the caller, but the custom ringtone is playing. If during the call you switch off the handsfree (via phone menu), then turn it back on, you can once again hear the caller.
If I turn off the Announce Caller function in Voice Command, I only get beeps in the headset, but I can hear the caller.
AT&T Fuze
Click to expand...
Click to collapse
starstreak said:
Yes. I'll say the callers name if its in your contacts, or it'll say the phone number if it isn't. real helpful if you don't want to take out your phone.
Click to expand...
Click to collapse
that's what I thought. But even when the announce option is checked, I don't hear anything except ringing on my bluetooth headset.
That's a different issue. But fixable. Do a search for microsoft voice command call announcement.
starstreak said:
I dunno about you, but it just drains me to redo all my contracts and settings on the phone after every hardreset.
Click to expand...
Click to collapse
Are you serious? Have you tried to back up your PIM info with the Sprite Backup that AT&T includes free on the phone? Or even sync it with your desktop?
Err yes. But when it didn't fix the BT issue, I had to hard reset. And resyncing to the computer takes a while, so is trying to redo all the edits you previously made before the issue happened that forced a hard reset.
motionmind said:
Are you serious? Have you tried to back up your PIM info with the Sprite Backup that AT&T includes free on the phone? Or even sync it with your desktop?
Click to expand...
Click to collapse
I just got off with HTC support as well. The other poster that talked to the guy that confirmed it. That tech said he could get it work on the phone itself but not using BT. They have sent some thing to MS to try and get a hotfix for it. Once they get it they will post under the support for the Fuze.
Right now no fix for it.
Does anyone know if there has been a fix to this? On my fuze if I make a call with by BT headset I can't hear the caller when they answer.
are you guys answering the phone on your handset or on your phone? because if you answer a call with bluetooth paired on your phone directly the sound will come out of the phone's earpiece. if you answer the call on your bluetooth headset's answer/hang up button then the sound will come through the headset.
Is there any possibility to get MSVC working on Diamond 2? I used it on my old O2 XDA Orbit 2 with Bepes Rom. Now I'm interested in to use it on my Diamond 2, or should I wait for official Update on Windows Mobile 6.5 with "TellMe" ?
I managed it, but it does not work and caused a problems (i.e. once connected to BT, it always stays connected).
Working fine on mine through bluetooth, I'm using V1.6.19214 found in a link here on XDA. I don't bother with the call button activation, which can be problematic to get working, as I only need it for voice dialling through my BT headset.
hmm, okay... thanks for the reply...
i just wanted to use it for incoming calls, so that the callers name is outspoken and for simplyfying writing sms...
I think i will wait for "tellme" in wm6.5
THX guys
eatmyshorts said:
hmm, okay... thanks for the reply...
i just wanted to use it for incoming calls, so that the callers name is outspoken and for simplyfying writing sms...
I think i will wait for "tellme" in wm6.5
THX guys
Click to expand...
Click to collapse
Hi,
I've voice command 1.6 in french, and it works nearly amazing fine. I'm not using bluetooth with it, and the only problem is that, sometimes, when I ask 'CALL ... AT HOME', it asks for confirmation, and it does not understand the 'YES' answer. This problem did not happen with version 1.5.
I also disables incoming caller names, because it has a conflict with the ring, and both are not audible (ring distorded, and voice not understandable).
But it tells you the meetings, mails, battery status, next appointements, etc...
Really amazing on a small device. I don't use contacts mamangers anymore for calling : just using voice command. I even work in the car, with the ambiant sound engine, and radio on (not too loud!). Worth the price for 19.95$ (as far as I remember).
regards,
Olivier.
PS: it fails on install because it has not enough hardware button. After install, go in the settings -> buttons and assing it to the only button. Pressing Green key for two seconds, and wait the the beep and microphone icon on notify bar. If you press the button too long, it makes a loud beep to tell you it is cancelled. You can also magic button, or remap the soft keys.
I used to use Cyberon Voice Commander to make a call. I have no idea how come HTC took off this software on Diamond 2...
I have sent the email to Cyberon to ask if there is any possible way to get their Voice Commander. They responded that the software now has retail version for about 10 languages, and they offer the full function 30-day trial on their website. I am using it so far. It works well on my Diamond 2.
Vito
Vito technology has 2 voice command apps. VoiceDialer to simlpy call some1 and Voice2Go to launch apps and cpntacts and so on.
How come there is just one button to assign something to? I would like to use cyberon voice commander via the headphone mic-button.. is there a way to do this, or is it a limitation in td2?
broman.m said:
How come there is just one button to assign something to? I would like to use cyberon voice commander via the headphone mic-button.. is there a way to do this, or is it a limitation in td2?
Click to expand...
Click to collapse
Try the latest version of Cyberon Voice Commander v2.5.2r from Cyberon website http://www.cyberon.com.tw/order_Product_con.php?NO100=15 as Lacerta mentioned .
This version provides "hold Volume-up" or "hold Volume-down" to launch CVC in Setting, as well as you can start it by pressing the button on BT earset.
Per xhaavardx, I downloaded the app from Vito Technology. Works great in the office. Totally useless driving down the road. And I do mean totally. Will not successfully dial a single voice tag I recorded in the parking lot unless I pull off the road and turn off all accessories, even the heater fan.
There was a post on this site somewhere recently stating that someone had converted the app from the old HTC Wizard into a .cab that could be installed on the diamond 2. I can't seem to search that thread out, though. Can any of you guys find it? That thing worked absolutely great!
mboessen said:
Per xhaavardx, I downloaded the app from Vito Technology. Works great in the office. Totally useless driving down the road. And I do mean totally. Will not successfully dial a single voice tag I recorded in the parking lot unless I pull off the road and turn off all accessories, even the heater fan.
There was a post on this site somewhere recently stating that someone had converted the app from the old HTC Wizard into a .cab that could be installed on the diamond 2. I can't seem to search that thread out, though. Can any of you guys find it? That thing worked absolutely great!
Click to expand...
Click to collapse
This one was ripped from Samsung but haven't tested it.
Tried a text but no luck so far. Will keep trying.
Also, MSVC is working great.
Bruce Inman said:
This one was ripped from Samsung but haven't tested it.
Tried a text but no luck so far. Will keep trying.
Also, MSVC is working great.
Click to expand...
Click to collapse
Tried the Tellme file on my Pure. It works decently while I'm on my wireless network but continually tells me it can't find the network even when it's at full strength on the 3G network. Maybe it's because it was configured to search for Sprint's network, I don't know. I've seen other say they got it to work for them.
Voice Dial for Touch Diamond 2
Hello, All:
Concerning voice dial for the Touch Diamond 2, I found Cyberon Voice Dial on this bulletin board in a thread somewhere, but, regretfully, I can't find it back. IF you can find it, it is DA BOMB!! Yeah, you have to record the voice tags, but it works great in noisy environments and almost never makes a mistake. I don't use BT with the new phone, but Cyberon worked great with the BT on my old Wizard. Whatever you do, don't pay for Vito Voice Dial. It is truly unserviceable in any situation with even moderate noise.
Good Luck! Hope this helps.
GrandAdmiral said:
Tried the Tellme file on my Pure. It works decently while I'm on my wireless network but continually tells me it can't find the network even when it's at full strength on the 3G network. Maybe it's because it was configured to search for Sprint's network, I don't know. I've seen other say they got it to work for them.
Click to expand...
Click to collapse
The program won't even start for me on WiFi.
I believe the network issue is specific to AT&T from what I have read. No fix for this yet.
Pity....