Database Info

Microsoft Voice Command 1.6 + BT Headset = Doesn't work!

Hello,
I have Voice Command 1.6 installed on my phone and when I use my headset to initiate the voice command stuff, I get stuck with the crappy Voice Tag software.
This worked perfectly for my Wizard; I just had to change the voice command button to run MS Voice Command and not the Voice Tag stuff. But... I can't, for the life of me, figure it out on this phone! Anyone have ideas? Thanks in advance!

mine works fine. here are my settings
voice enabled--yes
voice button--record
availability--password protected
announcement routing--bluetooth only
not saying that this is the only way for it to work, just that mine works and these are the settings i am using. try to turn on your headset, but activate the voice dial from the phone first by holding down the voice recorder button for 1-2 seconds. after you use it successfully, try to initiate a call from your bluetooth headset. other than that, i am out of thoughts. good luck

Somebody close this thread because I'm retarded as all hell. Sometimes simply rebooting the phone is the best solution. I made sure your settings matched mine and rebooted. What do you know? It works! ^_^ Thanks, guy!

Does it announce calls? Mine only does it for appointments and high importance email

ID64 said:
Does it announce calls? Mine only does it for appointments and high importance email
Click to expand...
Click to collapse
Unfortunately, mine does it for appointments and text messages/email (you can set it to announce all of them or only high-priority ones) as well -- the ringtone plays in the headset but no calls get announced, even though it's configured to do that. I really miss that...

Hello me I seek it in French version
Bonjour moi je le cherche en version francaise

[PROB] Bluetooth issue on the fuze- can't hear incoming caller

I asked this in the Raphael Software area, but I'm posting it here as it really isn't a software that someone made..
OK, I'm pretty sure BT worked on the phone. Now, any time I answer from a BT device, the incoming caller is muted. He can hear me, I can't hear him.
If I transfer the caller to the phone (which btw I can hear him on the phone) and back again to the BT device, I can then hear him. If I answer the incoming call from the phone buttons, I can hear the caller on my BT device.
I must've spent like 30 calls to my phone (I'm ticked as I'm sure each one counted on my minutes) thinking of different ways to fix this.
I thought it was my BT headset, but it works on my Tilt. So I tried it in my car BT. It can't hear the caller either. So something is wrong.
Here's how I COULD fix it:
If I turn off MS Voice Command "announce incoming calls" my phone itself will play my ringtone while I hear a beep tone in my BT earpiece. If I answer it form my headset, it works!
UPDATE:
I had my unit bloat free by following the "How to skip the bloat! (Fuze)" thread. I did another HARDREST and did the same bloatfree. Right off the bat, I synced my BT and I can't hear the incoming caller. Something is messed up.
One other person has this issue so far. Can anybody else check it? Voice Command is one of the best things there is for this phone. Just make sure its checked to announce incoming calls. Don't worry if you don't hear the incoming call being announced(you might hear a bell sound behind your normal ringtone) as thats a different issue you'll get untill you patch it. Just answer the call from the headset and see if you can hear the incoming caller.

Same Deal
I'm having the same problem. I just unchecked the 'announce incoming calls' and we'll see how that works. I'm on a work conference call so I can't try it till later.

it should work with it unchecked, but that defeats one of the best features on the voice command. Another thing, if you have ring&vibrate set, it you uncheck that feature, the phone will ring and vibrate. so other people around you will know your phone is ringing. In a library, I liked to use the announce feature because my ear piece would ring but the phone would only vibrate.

Here is what worked for me today -and I have been on the verge of sending the phone back to ATT...
1. I deleted all my pairings
2. I paired my JawBone2 first
3. Then, I paired my Plantronics A2DP thing (I had paired this one first before because I had it with me when the phone arrived in the office).
Funny thing: First time I paired my Plantronics 855 I got 2 options under "Advanced" at the end of the pairing procedure: 1. "Stereo Headset" 2. "Handsfree" I checked both. When I re-paired (after pairing with the JB2) I only got the "Stereo" option (which I checked). So now, all works fine. I can hear folks at the other end on either headset (actually, I have added a V1 as well) regardless of whether I or they initiated the call.
We'll see what the future brings here. But, for today, this is working.

I tried hard resets. Still no go.grrr... I dunno about you, but it just drains me to redo all my contracts and settings on the phone after every hardreset.
Hopefully your BT will stay working. Someone else here reported that it worked then stoped working after a while.

I have the same issue called HTC support last week and they where able to replicate this issue. If more people call HTC they may fix this problem faster.

I called ATT about it. Not aware. Of course they tried it and worked. It seems to be random on when it quits working. I know mine worked for a while. I just don't know what caused it to quit. And now that it did quit working, I can't get it to transmit the incoming caller to my BT. He can hear me though.
If it wasn't an hour job to restore it back to the way it was, I would hard reset it again. Tired to that at the moment.

I'm having the same issues on my Fuze. I unchecked 'announce incoming caller' and now it works just like my previous phone. My question is, what does announce incoming call actually do? Is it supposed to say who is calling through the bluetooth headset?

I too have this issue in my car (I haven't tried it yet with regular headsets, but I imagine the result would be the same). I have made the tweaks to the registry to get the Fuze to announce incoming calls, but the announcement is so soft, I can hardly hear it. I also have the issue of not being able to hear the person calling me (outgoing calls are fine).
I just did some experimenting and was wondering if others can duplicate this.
With Announce incoming calls on, when a call comes in and you answer it with the button on the headset (or the answer button in the car), you can't hear the person on the other end even though they can hear you.
Now try having an incoming call answered by hitting the Answer button on the phone itself (I only tried it with the on-screen Answer button, I didn't try it with the phone's hard button). You can now hear the person on the other end and they hear you. I was able to duplicate this numerous times.

Same issues...
With Announce Caller on in Voice Command, I cannot hear the caller if answering via the bluetooth headset. I'm not even sure it's is announcing the caller, but the custom ringtone is playing. If during the call you switch off the handsfree (via phone menu), then turn it back on, you can once again hear the caller.
If I turn off the Announce Caller function in Voice Command, I only get beeps in the headset, but I can hear the caller.
AT&T Fuze

Yes. I'll say the callers name if its in your contacts, or it'll say the phone number if it isn't. real helpful if you don't want to take out your phone.
DaRealGMan said:
I'm having the same issues on my Fuze. I unchecked 'announce incoming caller' and now it works just like my previous phone. My question is, what does announce incoming call actually do? Is it supposed to say who is calling through the bluetooth headset?
Click to expand...
Click to collapse

Err isn't that was I said in the original post? I mean about how its answering from the BT device that causes the incoming caller to be muted.
jglev said:
I too have this issue in my car (I haven't tried it yet with regular headsets, but I imagine the result would be the same). I have made the tweaks to the registry to get the Fuze to announce incoming calls, but the announcement is so soft, I can hardly hear it. I also have the issue of not being able to hear the person calling me (outgoing calls are fine).
I just did some experimenting and was wondering if others can duplicate this.
With Announce incoming calls on, when a call comes in and you answer it with the button on the headset (or the answer button in the car), you can't hear the person on the other end even though they can hear you.
Now try having an incoming call answered by hitting the Answer button on the phone itself (I only tried it with the on-screen Answer button, I didn't try it with the phone's hard button). You can now hear the person on the other end and they hear you. I was able to duplicate this numerous times.
Click to expand...
Click to collapse

Yup. That's the issue. It's only if you have VC to announce the incoming caller on, and you answer the the incoming call from the BT device.
DerralVL said:
With Announce Caller on in Voice Command, I cannot hear the caller if answering via the bluetooth headset. I'm not even sure it's is announcing the caller, but the custom ringtone is playing. If during the call you switch off the handsfree (via phone menu), then turn it back on, you can once again hear the caller.
If I turn off the Announce Caller function in Voice Command, I only get beeps in the headset, but I can hear the caller.
AT&T Fuze
Click to expand...
Click to collapse

starstreak said:
Yes. I'll say the callers name if its in your contacts, or it'll say the phone number if it isn't. real helpful if you don't want to take out your phone.
Click to expand...
Click to collapse
that's what I thought. But even when the announce option is checked, I don't hear anything except ringing on my bluetooth headset.

That's a different issue. But fixable. Do a search for microsoft voice command call announcement.

starstreak said:
I dunno about you, but it just drains me to redo all my contracts and settings on the phone after every hardreset.
Click to expand...
Click to collapse
Are you serious? Have you tried to back up your PIM info with the Sprite Backup that AT&T includes free on the phone? Or even sync it with your desktop?

Err yes. But when it didn't fix the BT issue, I had to hard reset. And resyncing to the computer takes a while, so is trying to redo all the edits you previously made before the issue happened that forced a hard reset.
motionmind said:
Are you serious? Have you tried to back up your PIM info with the Sprite Backup that AT&T includes free on the phone? Or even sync it with your desktop?
Click to expand...
Click to collapse

I just got off with HTC support as well. The other poster that talked to the guy that confirmed it. That tech said he could get it work on the phone itself but not using BT. They have sent some thing to MS to try and get a hotfix for it. Once they get it they will post under the support for the Fuze.
Right now no fix for it.

Does anyone know if there has been a fix to this? On my fuze if I make a call with by BT headset I can't hear the caller when they answer.

are you guys answering the phone on your handset or on your phone? because if you answer a call with bluetooth paired on your phone directly the sound will come out of the phone's earpiece. if you answer the call on your bluetooth headset's answer/hang up button then the sound will come through the headset.

Voice Dialing with Fuze

Does anyone know if you can activate voice dialing over bluetooth? I know that there were several hacks that were necessary to get it to work over my 8525.
Thanks!

Yes you can. It's called Voice Commander. It should be on by default. You can say stuff like "call john smith" or "dial 123-4567" pretty cool.

Voice Command with Bluetooth Headset??
I have an old bluetooth headset, but it doesn't seem to work with Voice Command. Does anyone have one working?

Yes, i have used vc with 3 different headsets. One moto, one jawboneII, one plantronics, and one stereo sony brt50 with a2dp. All worked well when pressing the command button on the hs. I've noticed it doesn't work quite well using phone for the command or to answer when cal comes in. The audio drops or doesn't connect.

Hmm, I have an old Moto H505 from work and not only do I not seem to be able to initiate a voice command using the headset, if I do initiate one using the phone I do not hear the response in the headset.
Thanks for letting me know that it is possible....

I had some issues with the stock VC on the ATT ROM. With ROMeOS though it doesn't come with VC (or at least not that I could find) so I added the latest PPC VC (1.6.19214) and it seems to work just fine now (including announcing calls via BT).

I thought that VC in general did not work with bluetooths. This is a limitation of VC not the phone or the bluetooth. On my old mogul, you could get it to initiate the command but not hear your response or confirmation.

Works fine for me with a Jabra BT-135 headset -- giving commands, getting feedback, and answering phone calls all work as expected. The only thing that doesn't work is announcing the name of the caller for incoming calls; all I get is a ring for that. (I have the stock AT&T ROM.)

pre-record for voice dialing?!
starstreak said:
Yes you can. It's called Voice Commander. It should be on by default. You can say stuff like "call john smith" or "dial 123-4567" pretty cool.
Click to expand...
Click to collapse
That's OK, but what I really want is to record names for each PHONE# foreach contact, like "call Scott CELL" or "call Scott HOME" or "call Josh OFFICE" like I used to do with my HTC MDA w/ WinMo5. Can I do this? I've been searching the phone and forums and this site's postings too... any help?

If you can load the program - it is in the WM 6.0 ROM - it will work with bluetooth devices.

markmensch said:
That's OK, but what I really want is to record names for each PHONE# foreach contact, like "call Scott CELL" or "call Scott HOME" or "call Josh OFFICE" like I used to do with my HTC MDA w/ WinMo5. Can I do this? I've been searching the phone and forums and this site's postings too... any help?
Click to expand...
Click to collapse
There's no need to do that with voice command. As long as your contacts are stored properly (i.e., a contact's mobile number is stored as mobile, their home number is stored as home, etc) you can just say something like "Call name on mobile", or "Call name at home".

From MS on how to use it:
http://www.microsoft.com/windowsmobile/en-us/help/more/voice-command-tutorials.mspx

Thanks Syntrix, Joecd04475 for the help, appreciate it. Not real excited about saying, "Call.. Doe, John... at... Mobile" when I'm used to saying, "John cell", but looks like that's what we got w/ WM6

markmensch said:
Thanks Syntrix, Joecd04475 for the help, appreciate it. Not real excited about saying, "Call.. Doe, John... at... Mobile" when I'm used to saying, "John cell", but looks like that's what we got w/ WM6
Click to expand...
Click to collapse
Well, you can get rid of the "...", at least -- Voice Command, in my experience, seems to be pretty good at deciphering connected speech. And there's no need to invert the names, either (I don't even know if it would work that way). In any event, it doesn't seem a great hardship to say, in a normal speaking cadence, "Call John Doe at work."

You might want to have a look at the German ROM version as there is Cyberon Voice Command included which exactly does what you want. You can record voice commands for each phone number, program, ... on your own. I still think MS Voice Command is more preferable as you do not have the hassle to record voice commands for every contact and so on on your own.
CU,
Cactus World

Call John Cell isn't any different then Call John on mobile.
MSVC also allows you to control other aspects of your phone in addition to calling contacts.
Play Metallica
Play Iron Maiden
What time is it?
What is my signal strength?
Ringer vibrate
Ringer off
Ringer high
and a ton more things you can speak also.

NotATreoFan said:
MSVC also allows you to control other aspects of your phone in addition to calling contacts.
Play Metallica
Play Iron Maiden
What time is it?
What is my signal strength?
Ringer vibrate
Ringer off
Ringer high
and a ton more things you can speak also.
Click to expand...
Click to collapse
Well, on my MS VC the ringer stuff does not work properly with the TP. And controlling the audio player is kinda funny as you have to pronounce the artist's, album's and song's names in a German way So Iron Maiden would have to be pronounced "Eeron My den"
CU,
Cactus World

NotATreoFan said:
Call John Cell isn't any different then Call John on mobile.
MSVC also allows you to control other aspects of your phone in addition to calling contacts.
--snip--
Click to expand...
Click to collapse
Yes, this is a perfect example of the corporate 'give you *more* of what you don't want' that is difficult to avoid when you're innovative over customer-driven.
Voice Command looks like a very nice feature that will do a lot for me, especially the music options you listed (though I assume that requires I 'play nice' by using playlists, import music through Media Player). It's a large feature that I may become an expert in someday, but a busy week into using my new phone, I just want to dial my most used numbers while driving, and Voice Command simply does not recognise my commands 90% of the time. I have a pretty plain-jane American accent, but VC simply doesn't know what I'm saying.

markmensch said:
I just want to dial my most used numbers while driving, and Voice Command simply does not recognise my commands 90% of the time. I have a pretty plain-jane American accent, but VC simply doesn't know what I'm saying.
Click to expand...
Click to collapse
That's strange; I have been really impressed,with 100% accuracy over the dozen or so times I've used it to call people and dial numbers since I got my Fuze. What is your setup? Are you using it over a Bluetooth headset or via the built-in microphone? (Not sure if that makes a difference, as I've not had any problems either way, but it might be something to try with your phone.) If using the built-in microphone, how far away are you holding the phone when you speak? Is Automatic Gain Control off? (The help file, I think it was, recommended not using AGC.)

Sweet. I had AGC on. I'll switch it off and try out on the drive home.
I'm using a wired headset w/ inline mic, usually great sound quality on the other end (others listening to me) so I figured it should've worked fine. Come to think of it, back when I still used a HTC Wizard, I had AGC off too. Shoot, just realized, maybe the inline mic on my earbud is disabled, maybe I need to hold the phone up to my mouth?
Got so angry trying to get it to recognize me on the drive home, almost threw it out the window. "No, you stupd #%$& I said 'CALL! HOME! AT! HOME!' "
Also, I'm frustrated that my old Wizard 3.5mm headset jack (which played sounds in both ears: double mono for phone calls)---when I use it w/ my Fuze (with USB converter brick) it only plays phone calls AND MUSIC in 1 ear: very vexxing.

Fuze - Bluetooth - Answering Incoming Calls

Hey Guys,
I have an issue with my Fuze and am hoping there is a simple setting that may help me out.
I have an Xlink Bluetooth gateway in my home, and have a Jag XK with bluetooth. Previously I had an 8525 where the bluetooth worked well.
I got the Fuze and I thought all was well. But for the last week, when I get an incoming call the blue tooth rings (houseline on XLink or XK Radio), but when I connect the call I get dead silence.
I can make outgoing calls via bluetooth and both devices work fine.
On the Fuze, if when ringing i hit answer on the phone, rather than the car stereo occassionally it connects.
Since I have the same issues (silent connection) when connecting via Xlink or XK I figured it must be an issue with the phone.
Any thoughts or ideas ?
Thanks
Dave

The issue is with Voice Command not with phone. If you update Voice Command to 1.6.19209 it will fix your issue. The other option is to turn off Announce incoming Calls option.

Update Voice Command
The phone has version 1.6.19971 --- So that would be a downgrade not an upgrade....
Does that still make sense ?
Dave

You've tested that specific version and it works? NATF said he tried his version from his Tilt and it didn't work. Please confirm!

Nice work!
You guys are really on it! I started noticing this problem today after enabling 'announce incoming calls' yesterday... didn't even occur to me. So I disabled it as per your suggestion, and it's working fine. Thanks very much for that. If I wanted to roll back to that earlier version, where could I find it? I still have my Tilt which I upgraded to 6.1 (battery's probably dead)... could I get the .cab off of it? Do we know for certain the earlier version works? Thanks again.

We were on it for a long time. You'll see multiple posts about that.

MS Voice Command on Diamond 2 or wait for WinMo 6.5 "TellMe"

Is there any possibility to get MSVC working on Diamond 2? I used it on my old O2 XDA Orbit 2 with Bepes Rom. Now I'm interested in to use it on my Diamond 2, or should I wait for official Update on Windows Mobile 6.5 with "TellMe" ?

I managed it, but it does not work and caused a problems (i.e. once connected to BT, it always stays connected).

Working fine on mine through bluetooth, I'm using V1.6.19214 found in a link here on XDA. I don't bother with the call button activation, which can be problematic to get working, as I only need it for voice dialling through my BT headset.

hmm, okay... thanks for the reply...
i just wanted to use it for incoming calls, so that the callers name is outspoken and for simplyfying writing sms...
I think i will wait for "tellme" in wm6.5
THX guys

eatmyshorts said:
hmm, okay... thanks for the reply...
i just wanted to use it for incoming calls, so that the callers name is outspoken and for simplyfying writing sms...
I think i will wait for "tellme" in wm6.5
THX guys
Click to expand...
Click to collapse
Hi,
I've voice command 1.6 in french, and it works nearly amazing fine. I'm not using bluetooth with it, and the only problem is that, sometimes, when I ask 'CALL ... AT HOME', it asks for confirmation, and it does not understand the 'YES' answer. This problem did not happen with version 1.5.
I also disables incoming caller names, because it has a conflict with the ring, and both are not audible (ring distorded, and voice not understandable).
But it tells you the meetings, mails, battery status, next appointements, etc...
Really amazing on a small device. I don't use contacts mamangers anymore for calling : just using voice command. I even work in the car, with the ambiant sound engine, and radio on (not too loud!). Worth the price for 19.95$ (as far as I remember).
regards,
Olivier.
PS: it fails on install because it has not enough hardware button. After install, go in the settings -> buttons and assing it to the only button. Pressing Green key for two seconds, and wait the the beep and microphone icon on notify bar. If you press the button too long, it makes a loud beep to tell you it is cancelled. You can also magic button, or remap the soft keys.

I used to use Cyberon Voice Commander to make a call. I have no idea how come HTC took off this software on Diamond 2...
I have sent the email to Cyberon to ask if there is any possible way to get their Voice Commander. They responded that the software now has retail version for about 10 languages, and they offer the full function 30-day trial on their website. I am using it so far. It works well on my Diamond 2.

Vito
Vito technology has 2 voice command apps. VoiceDialer to simlpy call some1 and Voice2Go to launch apps and cpntacts and so on.

How come there is just one button to assign something to? I would like to use cyberon voice commander via the headphone mic-button.. is there a way to do this, or is it a limitation in td2?

broman.m said:
How come there is just one button to assign something to? I would like to use cyberon voice commander via the headphone mic-button.. is there a way to do this, or is it a limitation in td2?
Click to expand...
Click to collapse
Try the latest version of Cyberon Voice Commander v2.5.2r from Cyberon website http://www.cyberon.com.tw/order_Product_con.php?NO100=15 as Lacerta mentioned .
This version provides "hold Volume-up" or "hold Volume-down" to launch CVC in Setting, as well as you can start it by pressing the button on BT earset.

Per xhaavardx, I downloaded the app from Vito Technology. Works great in the office. Totally useless driving down the road. And I do mean totally. Will not successfully dial a single voice tag I recorded in the parking lot unless I pull off the road and turn off all accessories, even the heater fan.
There was a post on this site somewhere recently stating that someone had converted the app from the old HTC Wizard into a .cab that could be installed on the diamond 2. I can't seem to search that thread out, though. Can any of you guys find it? That thing worked absolutely great!

mboessen said:
Per xhaavardx, I downloaded the app from Vito Technology. Works great in the office. Totally useless driving down the road. And I do mean totally. Will not successfully dial a single voice tag I recorded in the parking lot unless I pull off the road and turn off all accessories, even the heater fan.
There was a post on this site somewhere recently stating that someone had converted the app from the old HTC Wizard into a .cab that could be installed on the diamond 2. I can't seem to search that thread out, though. Can any of you guys find it? That thing worked absolutely great!
Click to expand...
Click to collapse
This one was ripped from Samsung but haven't tested it.
Tried a text but no luck so far. Will keep trying.
Also, MSVC is working great.

Bruce Inman said:
This one was ripped from Samsung but haven't tested it.
Tried a text but no luck so far. Will keep trying.
Also, MSVC is working great.
Click to expand...
Click to collapse
Tried the Tellme file on my Pure. It works decently while I'm on my wireless network but continually tells me it can't find the network even when it's at full strength on the 3G network. Maybe it's because it was configured to search for Sprint's network, I don't know. I've seen other say they got it to work for them.

Voice Dial for Touch Diamond 2
Hello, All:
Concerning voice dial for the Touch Diamond 2, I found Cyberon Voice Dial on this bulletin board in a thread somewhere, but, regretfully, I can't find it back. IF you can find it, it is DA BOMB!! Yeah, you have to record the voice tags, but it works great in noisy environments and almost never makes a mistake. I don't use BT with the new phone, but Cyberon worked great with the BT on my old Wizard. Whatever you do, don't pay for Vito Voice Dial. It is truly unserviceable in any situation with even moderate noise.
Good Luck! Hope this helps.

GrandAdmiral said:
Tried the Tellme file on my Pure. It works decently while I'm on my wireless network but continually tells me it can't find the network even when it's at full strength on the 3G network. Maybe it's because it was configured to search for Sprint's network, I don't know. I've seen other say they got it to work for them.
Click to expand...
Click to collapse
The program won't even start for me on WiFi.
I believe the network issue is specific to AT&T from what I have read. No fix for this yet.
Pity....