Related
Hi supporters, has anyone got Call Recorder or some similar application for Windows mobile, Or is it virtually impossible, b'cuz of the hardware incompatibility ?
There must have been discussion on this before as well, i am sure..
________________
People say nothing is impossible, but I do nothing every day.
has anyone got Call Recorder or some similar application for Windows mobile, Or is it virtually impossible, b'cuz of the hardware incompatibility ?
Click to expand...
Click to collapse
Resco AudioRecorder and Vito Audio Notes will do what you want to do, if your device supports the feature.
On my HTC Wizard the only way to record both sides of the conversation is to turn the speaker-phone on.
The Vito programmers have included a function in Audio Notes that turns on the speaker-phone automatically when you answer a call. I would assume that they did this because they found no other way around the problem on some devices.
Hope this helps.
rohitsharman said:
Hi supporters, has anyone got Call Recorder or some similar application for Windows mobile, Or is it virtually impossible, b'cuz of the hardware incompatibility ?
There must have been discussion on this before as well, i am sure..
________________
People say nothing is impossible, but I do nothing every day.
Click to expand...
Click to collapse
OMG use search ffs theres a thread as long as your arm (perhaps even longer) where the slickest programmers in the know from XDA dev try everything (and i mean everything) to get this to work then outline the reasons why it wont.
This Helped, Man
SUMM0NER said:
Resco AudioRecorder and Vito Audio Notes will do what you want to do, if your device supports the feature.
On my HTC Wizard the only way to record both sides of the conversation is to turn the speaker-phone on.
The Vito programmers have included a function in Audio Notes that turns on the speaker-phone automatically when you answer a call. I would assume that they did this because they found no other way around the problem on some devices.
Hope this helps.
Click to expand...
Click to collapse
THIS HELPED, MAN
hey buddy, thank u so much for lettin' me know about Vito Audio Notes, it works perfectly fine with my phone, though it needs the speakerphone to be on, while recording. But Something is always better than Nothing. I can compromise on that. And unlike Nokia, there are no more continuous annoyin' beeps at the background, while recording. Thanks again, mate.
________________
F.E.A.R means F**K EVERYTHING AND RUN.
try the livePVR
rtakeo said:
try the livePVR
Click to expand...
Click to collapse
Where can i find it ?
Phone call recording will not work on Palm treo 700w and 750v
Phone call PVR
Phone call PVR is the personal voice recorder mobile application that provides real time phone call recording using Automatic or Manual capture modes. It allows you to record your mobile phone conversations, either by recording all phone calls automatically, or by recording the next call you make.
Note:- Due to hardware limitation, when using LivePVR for phone call recording, the call must be made in speaker mode on some Windows Mobile Pocket PC devices for LivePVR to record the voice at theother end. Otherwise, the voice of the party at the other end may not be clear in the recorded file. Please check the trial version before making a purchase if this is not acceptable to you.
Phone call recording will not work on Palm treo 700w and 750v
http://www.softtrends.com/products/livepvr/livepvrwmppc.htm
mVoice disappoints too
I was hoping that mVoice will provide a solution but it disappointed me.
http://www.motionapps.com/product/mvoice/index.jsp
Here is an extract from mVoice manual:
"For Treo devices direct phone call recording is not available because of the hardware limitations of Treo devices. However phone calls can be recorded on Treo 750/700w having the following in mind:
− If you are using a headset you will be able to record only your voice - sound from the other side of a call cannot reach mVoice since Treo directs it to the ear speaker.
− If you are not using a headset, sound from both participants of the phone call will be recorded, but to make it usable you should turn on the "Speaker Phone" option after answering the call."
Record calls with Wizard without speaker phone
I can record calls getting both sides of the conversation without having to be in speaker phone mode. using my Wizard. Button 4, just hold it down and it will record as long as you hold the button down. I have that button (4) assigned to Record.
anothersmith said:
I can record calls getting both sides of the conversation without having to be in speaker phone mode. using my Wizard. Button 4, just hold it down and it will record as long as you hold the button down. I have that button (4) assigned to Record.
Click to expand...
Click to collapse
Button? what button? Do you mean function + 4 on the keyboard? Or the touchscreen "4" button?
Thanks,
-TheGooch
http://forum.xda-developers.com/showthread.php?t=493118 has been known to work on other devices and there is a thread with other devices in the Dev section.
Good luck
Not sure about the poll? 2 x non HTC devices
Install this cab file, and install any voice record software, it will record two-way conversation. This cab was created by Mskip, even though I found the reg file.
http://forum.xda-developers.com/showthread.php?t=493118
nick_martin said:
Install this cab file, and install any voice record software, it will record two-way conversation. This cab was created by Mskip, even though I found the reg file.
http://forum.xda-developers.com/showthread.php?t=493118
Click to expand...
Click to collapse
Do you have a link for the voice recorder app (in .cab form) that comes with the phone.. the one that starts recording when you hold down Button 4. I installed a custom ROM that didn't come with this app.
Thanks,
-Adam
WM Sound Recorder
I use WM Sound Recorder to record my HTC Touch Pro phone conversation. It could record outgoing and incoming calls automatically. maybe you could have atry.
In short
Call recording and answering machine softwares are available , but needs speaker phone to be on.
This is hardware limitation with HTC but works with some other windows mobile devices like O2.
If works with HTC please let us all know.
Recording for mobile phone users
While this thread is old, a Google search for the topic finds it, so I'll comment. I've always found a voice recorder useful, for general non-phone, landline, and mobile phone use (particularly for recording otherwise undocumented customer (dis)services promises). A Nokia 9500 phone with Psiloc Extended Recorder software gave me most of what I wanted when out and about, but landline recording was problematical. Windows Mobile is more difficult.
But I've found a solution which is pretty much perfect for me. It sounds theoretically awful, like recording music with a microphone in front of the radio, but works extremely well, with both sides of the conversation recording at similar sound levels and without extraneous noise. After buying a "cheap" Chinese recorder which plugged into the landline connection, that ticked the right boxes and worked as specified, but didn't do the job well in practice, I got the right equipment: a tiny voice recorder (95x37x10mm, 47g) and a microphone that sits in your ear, underneath the phone speaker or a hands-free (but not in-ear) headset. Olympus does lots of suitable recorders; I found the WS-210S 2nd-hand & cheap. The unique bit is the Olympus telephone pickup TP-7. It will record with the pickup from any phone you use (eg payphone), and of course from its microphone. The lowest-quality audio (138 hours in 512k! - don't go overboard for massive memory) is 100% fine for understandable speech, voice-activated recording, and low microphone sensitivity for phone or close dictation, high for general conversation. Makes small (60kB/min) time-stamped WMA recordings with useless file names which I move and rename ASAP to a computer into which I have USB-plugged the recorder.
This is so much more versatile than mobile-only software, for about 37 GBP (but no need to buy new version when I change phone) and a small gadget and cable to carry, that I have happily given up the complications of software. I use the mobile phone (and other people's phones) without a headset, and the landline with a Plantronics over-ear headset.
HTH, pol08
PS problems with Chinese voice recorder: needed fiddly settings every time used, didn't start in right mode; voice-activated recording didn't work with compression, and uncompressed file was huge .WAV; compressed file format was non-standard .ACT - could play only with Windows software supplied, but no editing to trim silences; no timestamp.
Since there are recent comments on this thread....
Thus typing-in....ACR call recorded has worked for me without the speaker mode also..
It works smoothly...
http://forum.xda-developers.com/showthread.php?t=536472
Can U do call recording on touch pro? nearly all HTC phones cannot record calls, even with third party software. I remember that when I changed my ROM on my Jasjar from a phone dealer, Call Recording worked but speaker phone stopped. Are there any registry settings?
I'm curious to know this as well. None of my PPC phones were able to do this but my OLLLLLDDDDDDDDDDDDD Nextel i930 phone was able to and it was based off of the old Windows Mobile CE platform, so I don't see why the Raphael can't handle the task...
Maybe because call recording is illegal in many countries...
Try this:
Resco Audio Recorder
It can record all Your calls automatically.
It can do. But it depends on the hardware whether or not it records both sides of the call. This was not the case with the tytn ii. And unfortunately I dont hold out hope for the raph.
Thats why I keep my old SE phone.
The "illegal" argument is pretty thin, its 100% legal if you inform the person you are talking with that you are recording.
This is a useful tool for some people, and its just silly that HTC refuse to implement this feature.
I use VITO Audionotes on my kaiser right now and the calll recording works pretty well, especially on speaker phone.
In Sweden the law says that if one of the callers is aware that the call is recorded, then it's legal. If none of the callers know, then it is illegal.
" if one of the callers is aware that the call is recorded, then it's legal. If none of the callers know, then it is illegal."
?
sounds odd should that not be if both callers know it's legal
but if one dont it's illegal ?
if none of them know then who's doing the recording?
apart from the operators and secret service ?
I use VITO Audionotes on my kaiser right now and the calll recording works pretty well, especially on speaker phone.
Click to expand...
Click to collapse
Really? How did you get it to work? Just tried it and I get no sound at all. Haven't tried speakerphone mode, I imagine that would work, but it is kind of useless.
Great news for you guys interested in recording calls (personally I'm not) There WILL definitely be a recording feature built into the Touch Pro stock ROM
Check out the "Privacy Restrictions" on the first page of the Quick Start Guide!
...but that means call recording is possible?
Sounds like it!
Try the successor to VITO AudioNotes on http://iwindowsmobile.com/mobile-audio-recorder.html Audio Notes Touch
I asked this in the Raphael Software area, but I'm posting it here as it really isn't a software that someone made..
OK, I'm pretty sure BT worked on the phone. Now, any time I answer from a BT device, the incoming caller is muted. He can hear me, I can't hear him.
If I transfer the caller to the phone (which btw I can hear him on the phone) and back again to the BT device, I can then hear him. If I answer the incoming call from the phone buttons, I can hear the caller on my BT device.
I must've spent like 30 calls to my phone (I'm ticked as I'm sure each one counted on my minutes) thinking of different ways to fix this.
I thought it was my BT headset, but it works on my Tilt. So I tried it in my car BT. It can't hear the caller either. So something is wrong.
Here's how I COULD fix it:
If I turn off MS Voice Command "announce incoming calls" my phone itself will play my ringtone while I hear a beep tone in my BT earpiece. If I answer it form my headset, it works!
UPDATE:
I had my unit bloat free by following the "How to skip the bloat! (Fuze)" thread. I did another HARDREST and did the same bloatfree. Right off the bat, I synced my BT and I can't hear the incoming caller. Something is messed up.
One other person has this issue so far. Can anybody else check it? Voice Command is one of the best things there is for this phone. Just make sure its checked to announce incoming calls. Don't worry if you don't hear the incoming call being announced(you might hear a bell sound behind your normal ringtone) as thats a different issue you'll get untill you patch it. Just answer the call from the headset and see if you can hear the incoming caller.
Same Deal
I'm having the same problem. I just unchecked the 'announce incoming calls' and we'll see how that works. I'm on a work conference call so I can't try it till later.
it should work with it unchecked, but that defeats one of the best features on the voice command. Another thing, if you have ring&vibrate set, it you uncheck that feature, the phone will ring and vibrate. so other people around you will know your phone is ringing. In a library, I liked to use the announce feature because my ear piece would ring but the phone would only vibrate.
Here is what worked for me today -and I have been on the verge of sending the phone back to ATT...
1. I deleted all my pairings
2. I paired my JawBone2 first
3. Then, I paired my Plantronics A2DP thing (I had paired this one first before because I had it with me when the phone arrived in the office).
Funny thing: First time I paired my Plantronics 855 I got 2 options under "Advanced" at the end of the pairing procedure: 1. "Stereo Headset" 2. "Handsfree" I checked both. When I re-paired (after pairing with the JB2) I only got the "Stereo" option (which I checked). So now, all works fine. I can hear folks at the other end on either headset (actually, I have added a V1 as well) regardless of whether I or they initiated the call.
We'll see what the future brings here. But, for today, this is working.
I tried hard resets. Still no go.grrr... I dunno about you, but it just drains me to redo all my contracts and settings on the phone after every hardreset.
Hopefully your BT will stay working. Someone else here reported that it worked then stoped working after a while.
I have the same issue called HTC support last week and they where able to replicate this issue. If more people call HTC they may fix this problem faster.
I called ATT about it. Not aware. Of course they tried it and worked. It seems to be random on when it quits working. I know mine worked for a while. I just don't know what caused it to quit. And now that it did quit working, I can't get it to transmit the incoming caller to my BT. He can hear me though.
If it wasn't an hour job to restore it back to the way it was, I would hard reset it again. Tired to that at the moment.
I'm having the same issues on my Fuze. I unchecked 'announce incoming caller' and now it works just like my previous phone. My question is, what does announce incoming call actually do? Is it supposed to say who is calling through the bluetooth headset?
I too have this issue in my car (I haven't tried it yet with regular headsets, but I imagine the result would be the same). I have made the tweaks to the registry to get the Fuze to announce incoming calls, but the announcement is so soft, I can hardly hear it. I also have the issue of not being able to hear the person calling me (outgoing calls are fine).
I just did some experimenting and was wondering if others can duplicate this.
With Announce incoming calls on, when a call comes in and you answer it with the button on the headset (or the answer button in the car), you can't hear the person on the other end even though they can hear you.
Now try having an incoming call answered by hitting the Answer button on the phone itself (I only tried it with the on-screen Answer button, I didn't try it with the phone's hard button). You can now hear the person on the other end and they hear you. I was able to duplicate this numerous times.
Same issues...
With Announce Caller on in Voice Command, I cannot hear the caller if answering via the bluetooth headset. I'm not even sure it's is announcing the caller, but the custom ringtone is playing. If during the call you switch off the handsfree (via phone menu), then turn it back on, you can once again hear the caller.
If I turn off the Announce Caller function in Voice Command, I only get beeps in the headset, but I can hear the caller.
AT&T Fuze
Yes. I'll say the callers name if its in your contacts, or it'll say the phone number if it isn't. real helpful if you don't want to take out your phone.
DaRealGMan said:
I'm having the same issues on my Fuze. I unchecked 'announce incoming caller' and now it works just like my previous phone. My question is, what does announce incoming call actually do? Is it supposed to say who is calling through the bluetooth headset?
Click to expand...
Click to collapse
Err isn't that was I said in the original post? I mean about how its answering from the BT device that causes the incoming caller to be muted.
jglev said:
I too have this issue in my car (I haven't tried it yet with regular headsets, but I imagine the result would be the same). I have made the tweaks to the registry to get the Fuze to announce incoming calls, but the announcement is so soft, I can hardly hear it. I also have the issue of not being able to hear the person calling me (outgoing calls are fine).
I just did some experimenting and was wondering if others can duplicate this.
With Announce incoming calls on, when a call comes in and you answer it with the button on the headset (or the answer button in the car), you can't hear the person on the other end even though they can hear you.
Now try having an incoming call answered by hitting the Answer button on the phone itself (I only tried it with the on-screen Answer button, I didn't try it with the phone's hard button). You can now hear the person on the other end and they hear you. I was able to duplicate this numerous times.
Click to expand...
Click to collapse
Yup. That's the issue. It's only if you have VC to announce the incoming caller on, and you answer the the incoming call from the BT device.
DerralVL said:
With Announce Caller on in Voice Command, I cannot hear the caller if answering via the bluetooth headset. I'm not even sure it's is announcing the caller, but the custom ringtone is playing. If during the call you switch off the handsfree (via phone menu), then turn it back on, you can once again hear the caller.
If I turn off the Announce Caller function in Voice Command, I only get beeps in the headset, but I can hear the caller.
AT&T Fuze
Click to expand...
Click to collapse
starstreak said:
Yes. I'll say the callers name if its in your contacts, or it'll say the phone number if it isn't. real helpful if you don't want to take out your phone.
Click to expand...
Click to collapse
that's what I thought. But even when the announce option is checked, I don't hear anything except ringing on my bluetooth headset.
That's a different issue. But fixable. Do a search for microsoft voice command call announcement.
starstreak said:
I dunno about you, but it just drains me to redo all my contracts and settings on the phone after every hardreset.
Click to expand...
Click to collapse
Are you serious? Have you tried to back up your PIM info with the Sprite Backup that AT&T includes free on the phone? Or even sync it with your desktop?
Err yes. But when it didn't fix the BT issue, I had to hard reset. And resyncing to the computer takes a while, so is trying to redo all the edits you previously made before the issue happened that forced a hard reset.
motionmind said:
Are you serious? Have you tried to back up your PIM info with the Sprite Backup that AT&T includes free on the phone? Or even sync it with your desktop?
Click to expand...
Click to collapse
I just got off with HTC support as well. The other poster that talked to the guy that confirmed it. That tech said he could get it work on the phone itself but not using BT. They have sent some thing to MS to try and get a hotfix for it. Once they get it they will post under the support for the Fuze.
Right now no fix for it.
Does anyone know if there has been a fix to this? On my fuze if I make a call with by BT headset I can't hear the caller when they answer.
are you guys answering the phone on your handset or on your phone? because if you answer a call with bluetooth paired on your phone directly the sound will come out of the phone's earpiece. if you answer the call on your bluetooth headset's answer/hang up button then the sound will come through the headset.
Or is it just me?
While on a call, a incoming call renders all audio on both calls dead. Regardless if you answer, ignore or let go to VM, neither person can no longer hear any audio.
I have tried this in many different scenarios. I am using T-Mobile in the NYC area.
If anyone else is experiencing this, please respond.
UPDATE!!!!!
The "Viber" app I installed was the cause of the problem. Once I uninstalled it immediately fixed the problem.
me too.
Hi, I have the exact same problem. It is quite frustrating.
The only work around I have found so far is to go in to call settings -->additional settings and turn off call waiting. Which is also kind of annoying.
Does anyone have a more elegant solution? (like having the incoming call sound a beep instead of taking over my entire call and rendering the phone useless!)
zyoeva said:
Hi, I have the exact same problem. It is quite frustrating.
The only work around I have found so far is to go in to call settings -->additional settings and turn off call waiting. Which is also kind of annoying.
Does anyone have a more elegant solution? (like having the incoming call sound a beep instead of taking over my entire call and rendering the phone useless!)
Click to expand...
Click to collapse
hi
and Asslam o Alykum
here is same problem
i have samsung galaxy i9000 if calling via viber incoming voice is well
But out going voice is no this just for me or this is a problem in the settings,
kindly help me expert
I've tried EVERY telephone call recording software on the market for my Rooted evo4g, the best I've ever gotten was barealy audible quality from the person on the other end, my voice fine.
I've heard conflicting info whether the problem is hardware or software, apparently overseas an android has an option every time you make a call to record it or not.
Is there any solution to clearly and loudly record (legally of course) a telephone conversation ?
Apparently I gather it's three files that are missing from the US version that prevents this.
Is it possible?
Jef