Database Info

How do I know if my Cingular 8125 is CID Unlocked?

ROM v 2.25.11.1 WWE
ROM 5/11/06
Radio v 02.25.11
Protocol v 4.1.13.12
ExtROM v 2.25.11.102

empiresoftware said:
ROM v 2.25.11.1 WWE
ROM 5/11/06
Radio v 02.25.11
Protocol v 4.1.13.12
ExtROM v 2.25.11.102
Click to expand...
Click to collapse
We don't have a way of telling whether or not it is unlocked, just whether or not you CAN unlock it (depending on whether you have a G3 or G4) I am not sure what you have from this, so please soft reset your phone and give us the IPL and SPL so we can tell you what type of phone you have.
Also, go here once you have found out your IPL and SPL to find out whether you have a G3 or G4. G4s cannot be unlocked and you need to use different software to flash your phone. Good luck.
MOD - Please move this to the General forum for the Wizard.

IPL & SPL
The IPL & SPL are both "2.25" no zeros...so it must be G3.

You should do some reading first before you brick your phone. Many people want to jump right in without reading. You should know if you CID unlocked your phone or not, unless you bought it from someone else.
There is know way to check if it is CID unlocked. Just run the program and choose yes when it asks if you want to CID unlock. You will also find that people here will suggest using the search button.
For your reading enjoyment.
http://forum.xda-developers.com/showthread.php?t=310831
http://forum.xda-developers.com/showthread.php?t=285435
http://forum.xda-developers.com/showthread.php?t=249474
http://forum.xda-developers.com/showthread.php?t=265928

CID Unlock fails
Well I did read the procedure, but I get the following error when trying to unlock or CID unlock the phone:
machinagod's HTC Wizard Unlocker v0.2
NOW WITH CID Unlocking POWER!
--------------------
WARNING: This tool is highly experimental!
I will NOT be held responsible for any problems caused by this tool.
--------------------
Thanks to xda-developers, spv-developers, and especially itsme by the work they
released. This solution would not be possible without them.
--------------------
U. Unlock
L. Lock
C. CID Unlock (SuperCID)
Q. Quit
--------------------
Type the letter and press Enter: C
CID unlocking mobile... DO NOT DISCONNECT UNTIL THE PHONE REBOOTS!
CopyTFFSToFile(0x0, 0x10000, lock_backup.bin)
g=92: 17cc0cb1 - 8dba82c2eac5a1f1
Key idx: 92
olddata: 5a59d28bc2764cc8460f100469464259621e8365aeb43277cf 2858b925828379
newdata: 95ea23df0bf16432cf7be60912a5cbdedee342037c9d3bd3de e342037c9d3bd3
newsum=fe016817 encsum=2d0c87f2537a5c73
This exe file was created with the evaluation version of Perl2Exe.
For more information visit http://www.indigostar.com
(The full version does not display this message with a 2 second delay.)
...
CopyFileToTFFS(cidunlocked.bin:0, 0, 00010000)
ERROR: ITWriteDisk - An internal error occurred.
result=80072746
Your phone is now CID unlocked....
Store the generated 'lock_backup.bin' file in a safe place. It can help to resto
re your device if anything goes wrong.
ECHO is off.
"Standing on the shoulder of giants"
Ricardo Afonso, 2005
Here is are my phone details:
Cingluar 8125
ROM v 2.25.11.1 WWE
ROM 5/11/06
Radio v 02.25.11
Protocol v 4.1.13.12
ExtROM v 2.25.11.102
I'd really like to try these ROMs, but if I can't CID unlock (or verify if CID unlock worked) then I'm screwed.
Thanks!

I saw that in your other post, it says that your phone is now CID unlocked but I don't know about the error. Maybe someone else can answer that.

Yeah that message is pretty much canned in the batch file...am I skipping a step somewhere prior to running lokiwiz?

Xelencin ROM w/Unlocker .. G3-Only .. !
http://rapidshare.com/files/39310061/T-Mobile_RUU_Wizard_2261020_226_22511_ENG_US.exe
This is the link I used....when I received my replacement device.
http://forum.xda-developers.com/showthread.php?t=285435
The newer devices are harder to crack.
You must follow step by step to properly CID Unlock the device.
Xelecin who was a cook created a T-Mo ROM with a built in CID Unlocker built in
Its not guaranteed to work on newer devices but its worth a try.....

Kaiser SuperCID and Security Unlocker + HardSPL with AT command mode support

Kaiser SuperCID and Security Unlocker v0.1
===============================================
Brought to you by jockyw2001
(c)2008 jockyw2001
Consider a donation to keep the R&D going
Click here to send your PayPal donation.
Download links:
Rapidshare
Megaupload
EDIT: new version v0.2 attached!! Download and unpack the full package from any of the above links and replace kaiser-supercid.exe in the step2 directory
NOTE: THIS TOOL IS FOR DEVS AND POWER USERS. IF YOU ONLY WANT TO SIM UNLOCK THEN USE MY KAISER SIM UNLOCKER HERE
Note for Vista users
===============
This guide will explain how to change your drivers to the xp. You will have problems running the unlocker otherwise. Log in as administrator if you run the ROM update tool and unlocker. That also applies to XP users.
Instructions
============
0. Make sure there is a working SIM in the device.
1. Make sure you installed HardSPL as follows: power off and then press power on while keeping camera pressed, this will enter the so called bootloader mode and you see a tri-color screen (Red, Green, Blue). You should see "SPL-1.0 OliPof" or "SPL-1.1.JockyW" on the second line in the top left corner. You can exit this mode by means of a "soft reset": press the reset button with the stylus. Note that the security unlocker does not work with "SPL-3.28.Hard" and "SPL-3.29.Hard".
2. Make a note of the radio version that is currently installed. You see the version strings in the splash screen which appears soon after power on (e.g. "R 1.27.14.09"). Since we will flash a special radio in step 5 you need to flash back your original radio in the last step. You can download radio roms from XDA devs here.
3. Connect PC and Kaiser with a USB cable and keep it connected until the last step.
4. Power on the Kaiser and let it boot into Windows Mobile. On the PC make sure the activesync icon is green.
5. After you unpacked the download you see directories "step1" and "step2". Go into "step1" and run KaiserCustomRUU.exe. This will flash the special patched radio rom. Follow the instructions until it is finished. IMPORTANT: Make sure that the flash correctly finished. The device will restart automatically once the flashing is completed.
6. Power off and power on in tri-color bootloader mode.
7a. right-click activeync icon and uncheck "Allow USB connections" from Connection Settings
7b. On your PC go into the "step2" directory and run "kaiser-supercid.exe". If all went well you will see the text below
7c. right-click activeync icon and check "Allow USB connections" from Connection Settings
Text shown if all went well:
Code:
=== Kaiser SuperCID and Security Unlocker v0.2 (c)2008 by jockyw2001
=== Donations happily accepted, paypal to [email protected]
[] Done, your device should now be superCID and Security Unlocked
[] Your device is unlocked and you can change anything anytime ;)
[] Don't forget to flash your original radio
Press Enter to exit
If you see this:
Code:
=== Kaiser SuperCID and Security Unlocker v0.2 (c)2008 by jockyw2001
=== Donations happily accepted, paypal to [email protected]
Your CID = HTC__001
[] Failed! Please soft reset and try again
[] To soft reset press and hold camera button and then press reset with stylus
Press Enter to exit
then do a soft reset (press and hold the camera button first and then shortly press the reset button with the stylus) and run "kaiser-supercid.exe" again.
8. Download the original radio from here to the "step3" directory on your PC and flash it with KaiserCustomRUU.exe
That's all folks
Now you can look forward to another great tool which I will release soon: "Kaiser Radio Dumper"
Enjoy and ... donate to keep R&D going! Thx!
JockyW
Credits
=======
* des, pof and olipro for SSPL and HardSPL
* arc and all the other great minds at XDA devs
* viperbjk, adfree and all other QC hackers at Modopo
* Tom Codon for testing
(c)2008 jockyw2001
[email protected]
Jan 21th 2008
===========================================
EDIT
HardSPL with AT Command Interpreter Support
This HardSPL is the perfect companion to your security unlocked Kaiser
None of the HTC SPLs for Kaiser (and other MSM7x00 models sich as Wings, Niki, Polaris etc.) support the AT command interpreter mode. I have patched the olipro HardSPL and added support for AT command mode.
To install it you must run the SSPL (e.g. this one here).
If it installed correctly you will see "SPL-1.1.JockyW" in the top left corner of the tri-color bootloader screen.
Use it as follows:
- enter bootloader (press and hold camera and then press power on)
- type "rtask 4"
- type "rtask 7"
- type "ATE" (turn on screen echo)
- type "ATV1" (verbosity 1)
- type "ATI" (information and IMEI)
- type "retuoR" (return to SPL interactive command mode)
- type "ResetDevice"
There are many interesting GSM AT command interface commands described in the Hermes Wiki.
================================================
Edit2: Kaiser Security Relocker
Some users with a security unlocked device would like to relock it again e.g. for warranty purposes. Unzip kaiser-relock.exe from the attached kaiser-relock.zip into the "step2" directory of the security unlocker (in the same directory there should be kaiser-supercid.exe). Carry out the same steps as for the security unlocker but in step 7b run kaiser-relock.exe
Have fun!
(c)2008 jockyw2001
[email protected]
Feb 6th 2008

Good lord man. Do you ever rest? Way to go.
Edit:
Let me be the first to say, once I tried it, then booted to bootloader mode, directly on the top it said "Security unlocked".
Worked like a champ, as if there was ever any doubt. Way to go again bud.

DAMN MAN!
You said "coming soon", but u didn't say lighting fast!
White Screen fixes, Sim Unlocker, SuperCID & Security Unlocker, Radio Dumper....whats next?!?!
Seriously tho:
Thanks for all the hard work and apps!

you are the master i will be sending you a donation cant wait to try it

Coming soon, I figured atleast a week!

guys what is supercid ?

dang, that quick ???
Thanks a lot.

StashCompInc said:
guys what is supercid ?
Click to expand...
Click to collapse
What I'm wondering is, what is the difference with this and Pof's CID unlocker? What more does this do that Pof's unlocker didn't do?

Wow I am truly impressed!! If you have found a way to dump radios you will be the first ever to go public with that type of app. I know of one other radio.nb dumper that works and I sworn to keep the maker secret! Up until now there was also no free SIMunlocker so your saying you also have a free SIM unlocker? the Kaiser forum thanks you for you efforts in this!

Madness, the man who never sleeps.
Thanks, this is an excellent tool! Your a genius!

WOW.. jockyw simply speechless!!!!!!
Feller is in the zone....
ps worked without a glitch again in Vista (with Vista WMD driver). My simplified way (without downgrading to XP WMD drivers) is just by disabling automatic startup of activesync upon device connect.

is there any difference with this and pof's cid unlock?
i'm asking cuz i already did pof's cid unlock a while ago and i just did ur sim unlock a few mins ago.
will this do anything different?

MistaRip said:
is there any difference with this and pof's cid unlock?
i'm asking cuz i already did pof's cid unlock a while ago and i just did ur sim unlock a few mins ago.
will this do anything different?
Click to expand...
Click to collapse
Iam wondering too, what does SuperCID do anyway? can someone give us some explanation about SuperCID? Can we do this if we already did Pof's CID Unlock and Kaiser Sim Unlocker?

WOW that was fast jocky!
I am awaiting the explanation of super cid vs cid before I go for it..

nice, nice work. Unfortunately I need to also ask the question: what can superCID do that HardSPL hasn't done for us already? please don't flame b/c I really just don't know.

waichai said:
Iam wondering too, what does SuperCID do anyway? can someone give us some explanation about SuperCID? Can we do this if we already did Pof's CID Unlock and Kaiser Sim Unlocker?
Click to expand...
Click to collapse
I could not find an answer to this question elsewhere really but I'm wondering the same thing. Could someone enlighten us?

Still curious..

^^Has same question as above 6 posts.

I think It lets you unlock your extended rom so you can modify it and or flash a different one.

^ correct ^

Can someone please explain about CID

I have unlock the sim on my Kaiser 8925
I have unlocked the cid
I have Flash a NoThrills V3
My question is do I have to do the CID unlocker each time I Flash a new rom
Thanks guys

to find this out, hold down the camera button while pushing in the stylus in the reset hole it should take you to a tricolor screen that should say olipof blah blah blah. if it says this, you dont. if it doesnt, i would

cheers mbarvian for the reply
so basically i am free to flash any 8925 rom cause it say SPL-1.0 OliPof
thank you

ron999 said:
cheers mbarvian for the reply
so basically i am free to flash any 8925 rom cause it say SPL-1.0 OliPof
thank you
Click to expand...
Click to collapse
Absolutely.......

I think the Wiki covers this. You can find most answers there faster than typing them in most cases.

ron999 said:
cheers mbarvian for the reply
so basically i am free to flash any 8925 rom cause it say SPL-1.0 OliPof
thank you
Click to expand...
Click to collapse
I would also do this to be on the safe side.
http://forum.xda-developers.com/showthread.php?t=361236
Here are the files you need with instructions
http://www.4shared.com/file/46447471/7ae96b57/Jockyw2001_HardSPL_-_SuperCID.html
Just run the SuperCID steps. This will security unlock your device. After my device got stuck with what was deemed, "the radio from hell" I have become and advocate of this process.
Seems that HTC has been doing some funny things. Jockyw2001 has confirmed this
jockyw2001 said:
A new sort of "Radio from Hell" emerged for the Diamond. See here. It combats rom updating by preventing us from running a SSPL.
A clear advice to all is: always make sure you have HardSPL installed and your device is security unlocked before installing a new radio !!
Click to expand...
Click to collapse
All new radio's might be this way as they only way to change them is to update them.

help me to unlock my phone

hi
Kaiser
help me to unlock SPL-3.29.Hard if i have to install SPL-1.0 OliPof from where i can get this SPL if i have to install window where i can download this windows
i already try this sofy
HardSPL and CidUnlocker
kaiser-simunlocker
its not working
thanks

gully321 said:
hi
Kaiser
help me to unlock SPL-3.29.Hard if i have to install SPL-1.0 OliPof from where i can get this SPL if i have to install window where i can download this windows
i already try this sofy
HardSPL and CidUnlocker
kaiser-simunlocker
its not working
thanks
Click to expand...
Click to collapse
Did you try them and get a white screen? Check out the wiki in the Kaiser general thread! All the info you need should be in there!
EDIT: Actualy, go here and read the FAQ in post #2
http://forum.xda-developers.com/showthread.php?t=396922

Please follow the advice given, and also check out the sticky post by mskip, the whole process is there.
Thanks
Dave

need help PLS...treo 750 unlocking problem.

to all who had been encountered this need you help...
palm treo 750 unlocking..
i had been unlocked the phone using cheetah unlocker
flash SPL successfully
unlock radio successfully
and put herm unlocker at prog.files and run it..it was also successful
when i enter now un-accepted sim it says that....
you have tried 91 times .please wait until time out
i was powering without touching it for almost 4 days but still 91 times
i also tried reseting it still that problem...
anyone out here who could help me in order to put the unlock code so that i will request its codes....

just want to update this trade,admin and to all

phedz said:
just want to update this trade,admin and to all
Click to expand...
Click to collapse
updating..............................
any one.......

I've had this issue too, and to date, I haven't found a solution. If you do find a solution, I'm grateful for it.

i had been unlocked the phone using cheetah unlocker too ...
bootlogo:
By Olipro & Cmonex
IPL-SSPL-OliNex
By Olipro & Cmonex
SSPL-1.01.OliNex
flash SPL successfully
unlock radio successfully
and put herm unlocker at prog.files and run it..it was also successful ...
but "un-accepted sim" ...

"direct bootlogo" (reset+media):
CHEE100
IPL-0.20
CHEE100
SPL-1.40.OliNex
start "cheetah unlocker" :
bootlogo ia again:
By Olipro & Cmonex
IPL-SSPL-OliNex
By Olipro & Cmonex
SSPL-1.01.OliNex
... its OK ?