Database Info

Help Needed Stuck on IPL/SPL Screen

Hi;
I recently bought XDA mini S & today morning when i tried to upgrade to WM6 my XDA with following file i downloaded :
"HTC.Wizard.Faria.WWE.CE.v5.2.318.AKU4.0.0.01.WM6.Rom.Upgrade.USE_AT_YOUR_OWN_RISK.rar"
I ran "romupdateutility.exe" from the installer. It went fine till 99% but suddenly i got error "Error ocured during installation. Pls refer to readme file" but no readme file available
Now my problem is, i am stuck on RGB Screen
IPL 2.21.001
SPL 2.21.001
USB
and can't proceed further.
Can anybody help me out pls.
Thanks.
and it

htcwizard123 said:
Hi;
I recently bought XDA mini S & today morning when i tried to upgrade to WM6 my XDA with following file i downloaded :
"HTC.Wizard.Faria.WWE.CE.v5.2.318.AKU4.0.0.01.WM6.Rom.Upgrade.USE_AT_YOUR_OWN_RISK.rar"
I ran "romupdateutility.exe" from the installer. It went fine till 99% but suddenly i got error "Error ocured during installation. Pls refer to readme file" but no readme file available
Now my problem is, i am stuck on RGB Screen
IPL 2.21.001
SPL 2.21.001
USB
and can't proceed further.
Can anybody help me out pls.
Thanks.
and it
Click to expand...
Click to collapse
Search for Wizard Love ROM , download it and flash it. And hope ..

Read The Wiki
Sounds like you didn't unlock your phone before flashing, so. . .
READ THE WIKI!!!
THEN --
UNLOCK YOUR PHONE!!!
AND -- FOLLOW DIRECTIONS!!!

Of course THERE IS a Readme file
htcwizard123 said:
.............i got error "Error ocured during installation. Pls refer to readme file" but no readme file available .............
Click to expand...
Click to collapse
Right click the RUU that you run and extract the files in it, you´ll find a Word doc file that probably you should´ve read before....! Wizard Love or your original ROM will take you out of the tricolor screen, good luck!

I am on G4 PDA, can anybody post "Step by step" guide how to unlock my PDA & then upgrade to WM 6 . It will be very helpful.
Thanks in advance

There are already step by step guides - read them. If you can't find them, read them, and understand them, then don't flash your ROM. There's an entire board dedicated to the G4 version, but I guess you didn't see it.
http://forum.xda-developers.com/forumdisplay.php?f=343

Try this outline for SIM unlock
htcwizard123 said:
I am on G4 PDA, can anybody post "Step by step" guide how to unlock my PDA & then upgrade to WM 6 . It will be very helpful.
Thanks in advance
Click to expand...
Click to collapse
For SIM Unlock
http://forum.xda-developers.com/showthread.php?t=265928&page=47
For upgrading READ and UNDERSTAND the content of the first sticky of the G4 section. If you are going to save some money not paying to imeicheck you should consider spending enough time reading the diverse threads. Good luck!

DON'T CID UNLOCK YOUR PHONE USING LOKIWIZ . YOU WILL BRICK IT !!!
You have a G4 and it can be unlocked only by http://www.imei-check.co.uk/
You don't necessarily need to unlock it. It's easy. This are the stepps to follow :
1. Search for "Wizard Love ROM"
2. Download it and flash it using RUU.
3. Wait untill it's flashed and the customisation is finished !!!!
4. If you want to flash to a custom ROM, just download a rom of your choice
5. Extract the nk.nbf using WinRar or similar.
6. Download ShellTool
7. IMPORTANT !!! Read SHELL TOOL Readme and follow exactly to proper flash your phone
8. Enjoy !

But Guys my PDA is currently showing RGB screen & i am stuck on this
IPL 2.21.001
SPL 2.21.001
RUU
USB
How to proceed further.Pls instruct me step by step as i am newbie

htcwizard123 said:
But Guys my PDA is currently showing RGB screen & i am stuck on this
IPL 2.21.001
SPL 2.21.001
RUU
USB
How to proceed further.Pls instruct me step by step as i am newbie
Click to expand...
Click to collapse
i forgot lol
Just plug it in the USB and start flashing the Wizard Love ROM by RUU

htcwizard123 said:
But Guys my PDA is currently showing RGB screen & i am stuck on this
IPL 2.21.001
SPL 2.21.001
RUU
USB
How to proceed further.Pls instruct me step by step as i am newbie
Click to expand...
Click to collapse
We still need to know for sure whether you have a G3 or G4. You say you have a G4, but your IPL/SPL ends in 001, which is a G3. A G4 chip will have 3 zeroes -- not 2 zeroes.
So, which is it for sure?? You can't do anything until that gets cleared up.

newbie2 said:
We still need to know for sure whether you have a G3 or G4. You say you have a G4, but your IPL/SPL ends in 001, which is a G3. A G4 chip will have 3 zeroes -- not 2 zeroes.
So, which is it for sure?? You can't do anything until that gets cleared up.
Click to expand...
Click to collapse
That's a G4
G3 is like : 2.XX
G4 is like : 2.XX.XX1

Ok, i Flashed my device with "wizard_love rom" & now i can able to start my PDA but after configuring screen, my PDA stucks at Pop-up menus Window, i can still able to connect with Active Sync on my PC.
Pls help me to move forward.
Thanks in adv.

I guess the Wiki is wrong, then. . .
I've copied and pasted directly from the Wizard WiKi. If this information is wrong, someone needs to correct it.
A *G3* Wizard will have the following:
IPL: 1.xx *or* 2.xx *or* 2.xx.00x (Note that this version only has *TWO* 0's.). _SPL: 1.xx *or* 2.xx *or* 2.xx.00x (Note that this version only has *TWO* 0's.)_
A *G4* Wizard will have the following:_IPL: 2.xx.000x (Note that this version has *THREE* 0's.)_ _SPL: 2.xx.000x (Note that this version has *THREE* 0's.)_
That information was taken directly from this thread. It's the same thread I refer people to in order for them to find out if they have a G3 or G4. If it's wrong, I'm sitting here with egg on my face. . .

Great !!!!! U saved my PDA .....Thanks a lot for the help. I will never make this silly mistake again.
Thanks again.

htcwizard123 said:
Ok, i Flashed my device with "wizard_love rom" & now i can able to start my PDA but after configuring screen, my PDA stucks at Pop-up menus Window, i can still able to connect with Active Sync on my PC.
Pls help me to move forward.
Thanks in adv.
Click to expand...
Click to collapse
Do a hard reset. (hold the comm manager button and the voice speed dial and press the reset button. when asked, press send and it will format.)
Don't cancel the customisation.
@newbie2 now i am confused
@htcwizard123 What did you do ? Who was right ?

Is hard reset is required after flashing the PDA ? I was stuck on POP up menu screen but when i follow the instruction for Cut & Paste it booted normally
I have let completed all the setting to load & again the PAD restarted normally.
Pls let me know if i do the hard reset ?
Thanks again for ur help. I am doing flashing 1 st time that's why i said i am newbie

anichillus he has a G3 device... its obvious

htcwizard123 said:
Is hard reset is required after flashing the PDA ? I was stuck on POP up menu screen but when i follow the instruction for Cut & Paste it booted normally
I have let completed all the setting to load & again the PAD restarted normally.
Pls let me know if i do the hard reset ?
Thanks again for ur help. I am doing flashing 1 st time that's why i said i am newbie
Click to expand...
Click to collapse
No hard reset needed if it's all good. But troubles me ...how could you select the pop up menu before the cut/paste....tutorial appeared...??
Also...you must be lucky that you didn't brick your phone. So next time, think twice and flash only after you're sure that you know what you're doing.
Remember : Don't flash anything that contains IPL/SPL !!! (a G3 bootloader will brick your G4. And from now on flash using ShellTool or unlock your device via www.imei-check.co.uk - that will cost you some money)
DuKe_GR said:
anichillus he has a G3 device... its obvious
Click to expand...
Click to collapse
Why you say that ? I still think that 2.xx.xx1 is a G4
Also i don't think that you can flash a G3 with Wizard Love

Thanks again for all ur help.
But i am sure i have G4 device, i think it is not CID unlocked that's why i came across this issue. Do u think i have G3 device ?
Now i want to Flash it Windows Mobile 6, shall i follow instructions which is given in "G4 step by step install wm6.zip". Will it work fine ?
Pls help

Vox Update SPL (USPL) 1.16

Hi guys,
I've just implemented a Vox USPL which allows you to flash any Vox ROM updates, i.e. you can flash any *official* ROM even if your phone's model and vendor ID doesn't match. It's confirmed that you can also flash cooked ROMs
This SPL is based on original Vox 1.16 SPL but includes 3 patches:
1) g_cKeyCardSecurityLevel = 0 (set 32)
2) Does not check Model & Vendor ID
3) Does not check signature*
(*) code must be formally signed i.e. contain properly-formatted signatures on the right places, however no checking is performed against them.
This means you can flash ANY ROM to your Vox after running USPL on it, no need to pay for CID unlock anymore!
The USPL will *not* help you to SIM unlock your device. You still have to pay for that.
The USPL runs in RAM and is *not* flashed to your device, so there is no risk there. Once it runs you can run any official Vox ROM update utility.
The USPL does *not* permanently CID unlock your phone, like the CID unlocker from imei-check or so.
After you flashed a ROM your phone is again CID locked. Each time you wonna flash a ROM with a different model and/or vendor ID (different from your phone) or a cooked ROM, you must run the USPL again and then flash the ROM.
It's beta and untested and the risk is entirely yours !! Don't blame me if you brick your phone
EDIT:
You can now also flash the USPL allowing you to flash any unsigned (cooked ROM or ROM module, e.g. radio or OS) or signed ROM with any model/vendor ID. The USPL substitutes your SPL until you perform a full ROM update. Consider it as an extra insurance in case something goes wrong with flashing cooked ROMs or any other ROM update !
Instructions:
1. Run the USPL (Vox USPL- CID BYPASS.zip)
2. Run the ROMUpdateUtility.exe (Vox-USPL-RUU.zip)
Have fun,
JockyW
The attachments:
SDA_ApplicationUnlock.zip : application unlocker if u need it
mtty1.42.zip : terminal emulator (not neccessary if u only do ROM updates, but if you wonna play with the bootloader commands you need it)
Vox-USPL-RUU.zip: flash version of USPL (Note: you must first run USPL from "Vox USPL- CID BYPASS.zip" before you can flash it with ROMUpdateUtility.exe from Vox-USPL-RUU.zip !!!)
Vox USPL- CID BYPASS.zip : instructions included
Credits: in particular to pof. This USPL and also the one for Excalibur is based on his USPL for the Elf. See here

I think this is one of the most fantastic news of the century!!!
Finally some cooking can start on this little device.
Thanks again,
Ka.

noob question
what the difference between sim unlock and cid unlock?

This can be found in various threads around here, anyway.
SIM Lock - You can't use a SIM from a different provider than the one who sold you the phone.
CID-Lock - You can't flash your phone with a ROM which hasn't been cooked by your provider (or manufacturer for HTC unbranded phones).
Ka.

jockyw2001 great but make one for htc oxygen pls.

htc s710 - rom
confirm this is working very gd
thanks for all yoru help and support to this fourm

hi, i tried the method described and when it runs haret my vox shuts down... and nothing happens, i have to turn it on myself.

madds said:
hi, i tried the method described and when it runs haret my vox shuts down... and nothing happens, i have to turn it on myself.
Click to expand...
Click to collapse
Same here

anyone online right now wanna drop me a line about this... what do I do exactly with the ruu file. Do I place rom image in that folder while runnning update???

so i followed the instructions and executed the cid bypass(installed itsutils and haret). once i get to the end it says use mtty or flash with RUU. so I attempt to flash right after (am I supposed to flash while the screen is black) but its gives me a connections error. I figure its because the phone is off. So I turn it on and update with the RUU again but only make it to 3% before I get a invalid vendor id. Would anyone care to comment on how I can flash this vox to the dopod rom...

madds said:
hi, i tried the method described and when it runs haret my vox shuts down... and nothing happens, i have to turn it on myself.
Click to expand...
Click to collapse
acid74 said:
Same here
Click to expand...
Click to collapse
To the users who had the same problem as me I am currently flashing my phone and I managed to get past my problem by using the SDA Application unlocker on my vox. I always thought that HTC were already application unlocked. Was going crazy for a while but I guess I should've followed the instructions step-by-step regardless of what I thought.
Big up to jockyw2001(and of course pof for without him alot of us would still be using shipped rom) for this wicked tool.
Cheers

neptune said:
To the users who had the same problem as me I am currently flashing my phone and I managed to get past my problem by using the SDA Application unlocker on my vox. I always thought that HTC were already application unlocked. Was going crazy for a while but I guess I should've followed the instructions step-by-step regardless of what I thought.
Big up to jockyw2001(and of course pof for without him alot of us would still be using shipped rom) for this wicked tool.
Cheers
Click to expand...
Click to collapse
Thanx man,last night i figured it out too......hows the dopod ROM??

acid74 said:
Thanx man,last night i figured it out too......hows the dopod ROM??
Click to expand...
Click to collapse
I only got this phone so I could upgrade it for a friend to stop the boot loop. It seems to have fixed that problem so I guess it's better than the other roms. On the other hand I can't stand smartphone's so my suggestion is to ditch your SP and switch to PPC . Also I read before hand that this ROM doesn't include Windows Live Messenger but it is included in the rom. Just thought I'd let u guys know.

input please
Just ran into another problem and would appreciate some input. I understand that USPL only works for one flash...but I wasn't aware that a hard reset counted as a flash. Regardless my device hung at the dopod boot screen after a hard reset. Is this normal after using USPL on a device, and if so does this occur with all devices??? I would hate to give a phone back and have to tell the person that they can't perform a hard reset...

neptune said:
Just ran into another problem and would appreciate some input. I understand that USPL only works for one flash...but I wasn't aware that a hard reset counted as a flash. Regardless my device hung at the dopod boot screen after a hard reset. Is this normal after using USPL on a device, and if so does this occur with all devices??? I would hate to give a phone back and have to tell the person that they can't perform a hard reset...
Click to expand...
Click to collapse
If you flash a full ROM the SPL is overwritten with the one in the ROM (Dopod = 1.19). Nothing to do with USPL. Booting can take a long time after hard reset. Unplug battery and try again.

jockyw2001 said:
If you flash a full ROM the SPL is overwritten with the one in the ROM (Dopod = 1.19). Nothing to do with USPL. Booting can take a long time after hard reset. Unplug battery and try again.
Click to expand...
Click to collapse
Thanks, I got it to work eventually...Good to know USPL doesn't effect hard resets, I guess you learn something new everyday.
If I had to take a guess before hand I'd figure a SP would boot faster than a PPC, but I realize now that I'd be wrong...
thanks to all for the help, I can finally return this Vox back to its owner
cheers

Hi
I flashed my E650 in French with the swissrom (present on FTP), all works !
an idea to change the logo operator to HTC original ?
thanks

thought I fixed the problem. seems as if after a day it just hangs at the dopod screen. It was working fine everytime I had it. As soon as I give it back it seems to hang. Guess ima just flash it back to the HTC rom, too much hassle for just $20.

why SDA_ApplicationUnlock.zip can't unlock my Orange SPV E650?

Successful rom flash done on a spv e650 on a sim unlock device UK orange

Are there any alternative application to SuperCID unlock? Besides from SPV-Developers

SPV-Developers' SuperCID unlock is not working anymore. I have a perfect connection and ActiveSync is connected to the internet, everything! My whole computer is connected to the internet, but the application can't seem to attempt to the spv-developers site.
There is one application from karhoe, but it's not working on my Tornado device! Some of my friends says that it's a tool for PPC only.
Here:
* If you cannot use SPV-Developers SuperCID tools, download this tool (http://karhoe.net/myfiles/lokiwiz02_173.zip) and use the alternative method. Then do the following.
- Keep your Tornado connected to ActiveSync.
- Extract it with WinRAR etc.
- Open the Lokiwiz.exe
- When you opend the Lokiwiz.exe you will get a black DOS screen with 4 options:
U. Unlock
L. Lock
C. Cid Unlock (SuperCID)
Q. Quit
Press C and then Enter. A few seconds later your phone is SuperCID...!!!
It doesn't seem to work on my Tornado device.

Hey check my post http://forum.xda-developers.com/showthread.php?p=2456333#post2456333
Hope you reach SuperCID your phone!!
See ya from Mexico

You need to run SDA_ApplicationUnlock first.

Is there a way to see if my device had been CID unlocked??

FrmPalm2WM said:
Is there a way to see if my device had been CID unlocked??
Click to expand...
Click to collapse
Yes, run TeraTermPro and type info2, you should see HTCSuperCID if you already unlock, refer my guide for screenshots

NO UNLOCK after follwoing all the steps...

=== Kaiser Sim Unlocker (c)2008 by jockyw2001
=== Donations happily accepted, paypal to [email protected]
can't find HTCE
can't find HTCE
Your Unlockcode =
[] Done, enter the unlockcode
[] And then flash your original radio
Press Enter to exit
when i first run it i dont get anything then i did the soft reset again while having the unlocker running i get that above message....plz some help me with this...
PHONE INFO:
KA1S*0
SPL-3.56.Hard
CPLD-8
R 1.27.12.11
D3.57.00.00

BENGALTIGER said:
=== Kaiser Sim Unlocker (c)2008 by jockyw2001
=== Donations happily accepted, paypal to [email protected]
can't find HTCE
can't find HTCE
Your Unlockcode =
[] Done, enter the unlockcode
[] And then flash your original radio
Press Enter to exit
when i first run it i dont get anything then i did the soft reset again while having the unlocker running i get that above message....plz some help me with this...
PHONE INFO:
KA1S*0
SPL-3.56.Hard
CPLD-8
R 1.27.12.11
D3.57.00.00
Click to expand...
Click to collapse
It doesn't work on the 3.xx hard spl's i don't think. Put hardspl v1.xx on there and then follow the instructions again.

the instructions stated that make sure your device is SPl1.xx, you should revert your spl back.

how to revert spl
tamkhanh said:
the instructions stated that make sure your device is SPl1.xx, you should revert your spl back.
Click to expand...
Click to collapse
HOw do i revert my SPL?

am also stuck on this step how do you get spl-1.0 back

chaos781 said:
am also stuck on this step how do you get spl-1.0 back
Click to expand...
Click to collapse
Just use jump spl and flash profs hard spl 1.0. Get it here!
http://forum.xda-developers.com/showthread.php?t=334679

Hi all. Apologies for hijacking the thread and asking for help on my first post .
jockyw2001 - thanks for the guide, it has served me well up until I get the unlock code.
I am booting the Tri-Colour bootloader mode ok, disabling the USB connections from Activesync, running Niki-supercid.exe, but all I get is the below:
=== Niki SuperCID and Security Unlocker (c)2008 by jockyw2001
=== Donations happily accepted, paypal to [email protected]
Nothing more.
The only way that I can get this to change is by unplugging and plugging in again, and then I get:
=== Niki SuperCID and Security Unlocker (c)2008 by jockyw2001
=== Donations happily accepted, paypal to [email protected]
can't find HTCE
can't find HTCE
[] Done, your device should now be superCID and Security Unlocked
[] Your device is unlocked and you can change anything anytime
[] Don't forget to flash your original radio
It is running SPL-1.15 Hard?
Any ideas?

gunn0r said:
Hi all. Apologies for hijacking the thread and asking for help on my first post .
jockyw2001 - thanks for the guide, it has served me well up until I get the unlock code.
I am booting the Tri-Colour bootloader mode ok, disabling the USB connections from Activesync, running Niki-supercid.exe, but all I get is the below:
=== Niki SuperCID and Security Unlocker (c)2008 by jockyw2001
=== Donations happily accepted, paypal to [email protected]
Nothing more.
The only way that I can get this to change is by unplugging and plugging in again, and then I get:
=== Niki SuperCID and Security Unlocker (c)2008 by jockyw2001
=== Donations happily accepted, paypal to [email protected]
can't find HTCE
can't find HTCE
[] Done, your device should now be superCID and Security Unlocked
[] Your device is unlocked and you can change anything anytime
[] Don't forget to flash your original radio
It is running SPL-1.15 Hard?
Any ideas?
Click to expand...
Click to collapse
do you have a niki or kaiser...this is the kaiser forum
and the spl you mention is not a kaiser spl

Guide for DFT - HSPL / RSPL Tool 4 Spark/ Trophy

Summary:
Guide By : unknown797
Official Thread: http://forum.xda-developers.com/showthread.php?t=1195647
What it does is that it will change your standard SPL (Red, blue, geen and white usb) logo to a RSPL or HSPL.
• RSPL loads on on ram only so upon switching off you lose it and it will return to the original SPL (OSPL).
• HSPL replaces your SPL into the ROM.
Blue = Optional steps or notes
Green = my comments
Purple = woo fun facts/news
Step Action
1. Power Off, then power on while holding volume down.
(Red, blue, geen and white usb) logo, have a quick look at the SPL to compare for Step 3 later.
2. Open the launch file with RSPL label, follow onscreen next and click next to Flash with RSPL (it will reboot your phone).
Note: I’ve got 3 options to select for the SPL versions, but they all revert back to the middle on so it doesn’t matter.
3. Once it is rebooted it will be in RSPL mode with the similar look to SPL, but you can see the numbers are different and labelled RSPL instead of SPL (shown on XDA).
Note: You can do an HSPL bit here if you like, just open the Install file instead of launch labelled HSPL, when its about to reboot hold down volume so you don’t have to manually power off and on again. You will notice it says HSPL now.
Extras: I’m using HSPL incase they patch the SPL bootloader in the near future. Nothing major really just stops the rom flashing software from upgrading.
4. Flash any Ansar or Release Roms from any country (I prefer Europe release as it has the latest radio version) without a signed_spl.ngb file.
Note: some firmware includes the spl into the rom, so you may want to edit it and remove that.
Extras: This part usually fails as it detects wrong vendor ID.
Attention: the DFS team has also released a Mango rom unlocked, but requires zune 4.8 to run and they modified the boot logo to DFS and changed the start page (annoying!), but its running smoothly… so far; I can’t use the caller ID display fix from advancedconfig tool (naturally that tool doesn’t work on mango either).
5. Bingo!
6. Optional - Install HTC connection setup xap and change your network provider to VF NZ so that you have the correct message centre details etc..

wickedpenguin said:
Summary:
Guide By : unknown797
Official Thread: http://forum.xda-developers.com/showthread.php?t=1195647
What it does is that it will change your standard SPL (Red, blue, geen and white usb) logo to a RSPL or HSPL.
• RSPL loads on on ram only so upon switching off you lose it and it will return to the original SPL (OSPL).
• HSPL replaces your SPL into the ROM.
Blue = Optional steps or notes
Green = my comments
Purple = woo fun facts/news
Step Action
1. Power Off, then power on while holding volume down.
(Red, blue, geen and white usb) logo, have a quick look at the SPL to compare for Step 3 later.
2. Open the launch file with RSPL label, follow onscreen next and click next to Flash with RSPL (it will reboot your phone).
Note: I’ve got 3 options to select for the SPL versions, but they all revert back to the middle on so it doesn’t matter.
3. Once it is rebooted it will be in RSPL mode with the similar look to SPL, but you can see the numbers are different and labelled RSPL instead of SPL (shown on XDA).
Note: You can do an HSPL bit here if you like, just open the Install file instead of launch labelled HSPL, when its about to reboot hold down volume so you don’t have to manually power off and on again. You will notice it says HSPL now.
Extras: I’m using HSPL incase they patch the SPL bootloader in the near future. Nothing major really just stops the rom flashing software from upgrading.
4. Flash any Ansar or Release Roms from any country (I prefer Europe release as it has the latest radio version) without a signed_spl.ngb file.
Note: some firmware includes the spl into the rom, so you may want to edit it and remove that.
Extras: This part usually fails as it detects wrong vendor ID.
Attention: the DFS team has also released a Mango rom unlocked, but requires zune 4.8 to run and they modified the boot logo to DFS and changed the start page (annoying!), but its running smoothly… so far; I can’t use the caller ID display fix from advancedconfig tool (naturally that tool doesn’t work on mango either).
5. Bingo!
6. Optional - Install HTC connection setup xap and change your network provider to VF NZ so that you have the correct message centre details etc..
Click to expand...
Click to collapse
so, i have trophy spl version 1.22.2250 and i cant install the rspl, why?
its AT-A1 (mobilkom austria a1) branded.

This was extremely easy on my Spark.
Followed the instructions and within a minute or so I had HSPL.
Super work, thanks a lot!
Now let me try to get Mango on the device.
Robin

LAZMUSTI said:
so, i have trophy spl version 1.22.2250 and i cant install the rspl, why?
its AT-A1 (mobilkom austria a1) branded.
Click to expand...
Click to collapse
Same here, my Trophy is from Vodafone Portugal

cooldfuzion said:
Same here, my Trophy is from Vodafone Portugal
Click to expand...
Click to collapse
Because that version has not been hacked yet.
Read the threads and you will know.

LAZMUSTI said:
so, i have trophy spl version 1.22.2250 and i cant install the rspl, why?
its AT-A1 (mobilkom austria a1) branded.
Click to expand...
Click to collapse
Working just fine for me.. Did you try release #2 ? I'm currently updating my ROM to HTC_EUROPE without any problems..

DominikZ said:
Working just fine for me.. Did you try release #2 ? I'm currently updating my ROM to HTC_EUROPE without any problems..
Click to expand...
Click to collapse
I am also on 1.22.2250, can you provide details on how you did this without problems?

Jorijn said:
I am also on 1.22.2250, can you provide details on how you did this without problems?
Click to expand...
Click to collapse
Sure.
First of all get DFT_XSPL_WP7FG2.rar from here.
Now get your phone into SPL Mode as described above.
Launch DFT_RSPL_WP7FG2_LAUNCH.exe select your SPL version and hit next.
After reboot, verify, that you are on Cotulla RSPL. Now you can launch the ROM Update utility. I used RUU_Spark_HTC_Europe_1.10.401.04_Radio_5.52.09.16_ 22.33a.50.10U_by_ansar from here

DominikZ said:
Sure.
First of all get DFT_XSPL_WP7FG2.rar from here.
Now get your phone into SPL Mode as described above.
Launch DFT_RSPL_WP7FG2_LAUNCH.exe select your SPL version and hit next.
After reboot, verify, that you are on Cotulla RSPL. Now you can launch the ROM Update utility. I used RUU_Spark_HTC_Europe_1.10.401.04_Radio_5.52.09.16_ 22.33a.50.10U_by_ansar from here
Click to expand...
Click to collapse
Actually, I did. The owner of the thread states that there is no working version for that specific SPL yet. That is why I was curious.
Anyway, the required version isn't available in the list.

Jorijn said:
Actually, I did. The owner of the thread states that there is no working version for that specific SPL yet. That is why I was curious.
Anyway, the required version isn't available in the list.
Click to expand...
Click to collapse
Hm. That's interesting. Because my SPL Version is 1.20.2250.0(117833) which was the last entry in the dropdown menu..

DominikZ said:
Hm. That's interesting. Because my SPL Version is 1.20.2250.0(117833) which was the last entry in the dropdown menu..
Click to expand...
Click to collapse
I'm using 1.22.2250. 1.20.xxxx doesn't work yet.

Jorijn said:
I'm using 1.22.2250. 1.20.xxxx doesn't work yet.
Click to expand...
Click to collapse
Apparently it does.. At least it did work for me. Because I'm now using an HTC_Europe Rom w/o any branding. And I got the additional htc Theme colour which was not available before - so definately a new ROM..

for those with problematics spl versions, i had 1.22 so it was impossible to make it
but i found a solution:
go to this thread
http://forum.xda-developers.com/showthread.php?t=924333
download and flash your correpondient version of the rom (it depends on the operator brand)
every rom on that topic has a inferior spl version so if you flash it, it will downgrade the spl version and you will be able to do the rspl/hspl process
regards

If there is a stock ROM available for you operator, that's the way to go. So for example the A1 users don't have luck if they have a bootloader higher than 1.20.xxxx

my phone is unlocked does not belong to any operator (buy it online, no carrier) which rom should I use?

please reply??

kenkoxda said:
my phone is unlocked does not belong to any operator (buy it online, no carrier) which rom should I use?
Click to expand...
Click to collapse
Don't exactly know what you mean, but you can flash any unbranded stock ROM without RSPL/HSPL. The only thing you need to find is the language of your choice.
For the official Mango update for unbranded Trophy look here:
http://forum.xda-developers.com/showthread.php?t=1265701
If you want to flash a cooked rom, you need RSPL/HSPL. Cooked ROMs for Trophy can be found in the Trophy Development section.
The choice of ROM is fully yours, what ROM suits your needs best?
BTW; please don't post the same question in multiple threads, and give the same bump of your question in those same threads.

Trophy with no USB connection on SPL
Hy,
I have a Trophy, and when I go in SPL mode, it doesn't appear anything in the lower side of the screen (serial or usb). Please HELP!
This is what appears:
PC40100 SS-BC (4K)
SPL-5.0.2250.1 (130781) MNG
MicroP (LED) 0x09
Touch A1 (v10,20)
SD SANDISK 7580Mb
Partition Info-v211v413
F400
The Trophy has a Vodafone branding although I bought it from O2.
So the problem is that I cannot connect my Trophy trough USB for RSPL or HSPL further.
Thank you very much for any help!

vulcan-rh said:
hy,
i have a trophy, and when i go in spl mode, it doesn't appear anything in the lower side of the screen (serial or usb). Please help!
This is what appears:
pc40100 ss-bc (4k)
spl-5.0.2250.1 (130781) mng
microp (led) 0x09
touch a1 (v10,20)
sd sandisk 7580mb
partition info-v211v413
f400
the trophy has a vodafone branding although i bought it from o2.
so the problem is that i cannot connect my trophy trough usb for rspl or hspl further.
thank you very much for any help!
Click to expand...
Click to collapse
and i have this problem pls help

dion86 said:
and i have this problem pls help
Click to expand...
Click to collapse
its easy and it works
use this instruction to downgrade your spl ftom v.5.0 to lower version
http://forum.xda-developers.com/showthread.php?t=1362194
then flash rspl/hspl and then flash anu custom rom you want