SPV-Developers' SuperCID unlock is not working anymore. I have a perfect connection and ActiveSync is connected to the internet, everything! My whole computer is connected to the internet, but the application can't seem to attempt to the spv-developers site.
There is one application from karhoe, but it's not working on my Tornado device! Some of my friends says that it's a tool for PPC only.
Here:
* If you cannot use SPV-Developers SuperCID tools, download this tool (http://karhoe.net/myfiles/lokiwiz02_173.zip) and use the alternative method. Then do the following.
- Keep your Tornado connected to ActiveSync.
- Extract it with WinRAR etc.
- Open the Lokiwiz.exe
- When you opend the Lokiwiz.exe you will get a black DOS screen with 4 options:
U. Unlock
L. Lock
C. Cid Unlock (SuperCID)
Q. Quit
Press C and then Enter. A few seconds later your phone is SuperCID...!!!
It doesn't seem to work on my Tornado device.
Hey check my post http://forum.xda-developers.com/showthread.php?p=2456333#post2456333
Hope you reach SuperCID your phone!!
See ya from Mexico
You need to run SDA_ApplicationUnlock first.
Is there a way to see if my device had been CID unlocked??
FrmPalm2WM said:
Is there a way to see if my device had been CID unlocked??
Click to expand...
Click to collapse
Yes, run TeraTermPro and type info2, you should see HTCSuperCID if you already unlock, refer my guide for screenshots
Related
Is there beside the SPVServices software any other software to make your Tornado SuperCID...?!
Because the website of spv-developers went down tonight.
help for me!!!
Aid, and we are two!
I had the same problem as Noxious Inc..
The program spvservices.exe not working, is there another way to do supercid?
My English is not very good, if not forgive me express well.
Greetings and thank you in advance!
LUIGIBER said:
Aid, and we are two!
I had the same problem as Noxious Inc..
The program spvservices.exe not working, is there another way to do supercid?
My English is not very good, if not forgive me express well.
Greetings and thank you in advance!
Click to expand...
Click to collapse
I've found a solution for our problem:
http://forum.xda-developers.com/attachment.php?attachmentid=25299&d=1133191016
Download the file: lokiwiz02_173
- Keep your Tornado connected to ActiveSync.
- Extract it with WinRAR etc.
- Open the Lokiwiz.exe
- When you opend the Lokiwiz.exe you will get a black DOS screen with 4 options:
U. Unlock
L. Lock
C. Cid Unlock (SuperCID)
Q. Quit
Press C and then Enter. A few seconds later your phone is SuperCID...!!!
Greetz
Noxious Inc. said:
I've found a solution for our problem:
http://forum.xda-developers.com/attachment.php?attachmentid=25299&d=1133191016
Download the file: lokiwiz02_173
- Keep your Tornado connected to ActiveSync.
- Extract it with WinRAR etc.
- Open the Lokiwiz.exe
- When you opend the Lokiwiz.exe you will get a black DOS screen with 4 options:
U. Unlock
L. Lock
C. Cid Unlock (SuperCID)
Q. Quit
Press C and then Enter. A few seconds later your phone is SuperCID...!!!
Greetz
Click to expand...
Click to collapse
I'm interested in knowing if anyone has had success in using this to unlock a Tornado... Is it a generic tool?
bipinsen said:
I'm interested in knowing if anyone has had success in using this to unlock a Tornado... Is it a generic tool?
Click to expand...
Click to collapse
It worked on mine =)
Thanks Noxious Inc.!!!
Sorry for my question, but I am also try to use SPV-Services.exe but failed due to spv-developers.com is down. I was trying to SIMUnlock my AUDIOVOX 5600, so can above tool also SIMUnlock my 5600?
Any suggestion would be great appreciated!
Noxious Inc. said:
I've found a solution for our problem:
http://forum.xda-developers.com/attachment.php?attachmentid=25299&d=1133191016
Download the file: lokiwiz02_173
- Keep your Tornado connected to ActiveSync.
- Extract it with WinRAR etc.
- Open the Lokiwiz.exe
- When you opend the Lokiwiz.exe you will get a black DOS screen with 4 options:
U. Unlock
L. Lock
C. Cid Unlock (SuperCID)
Q. Quit
Press C and then Enter. A few seconds later your phone is SuperCID...!!!
Greetz
Click to expand...
Click to collapse
this is for PPC,no for smartphone!!!
it is no work in smartphone!!
sanp007 said:
this is for PPC,no for smartphone!!!
it is no work in smartphone!!
Click to expand...
Click to collapse
Uhh.. Ok?? Contradictory statements in the same thread. Clarification, anyone??
Noxious Inc. said:
I've found a solution for our problem:
http://forum.xda-developers.com/attachment.php?attachmentid=25299&d=1133191016
Download the file: lokiwiz02_173
- Keep your Tornado connected to ActiveSync.
- Extract it with WinRAR etc.
- Open the Lokiwiz.exe
- When you opend the Lokiwiz.exe you will get a black DOS screen with 4 options:
U. Unlock
L. Lock
C. Cid Unlock (SuperCID)
Q. Quit
Press C and then Enter. A few seconds later your phone is SuperCID...!!!
Greetz
Click to expand...
Click to collapse
i have a cingular 2125 and the MS-DOS app isnt working. it says the files may be in use.
The supercid function definiety works on Smartphone. (don't know about the other functions). I have successful supercid'ed my SP5m using Lokiwiz and its now running WM6.
bipinsen said:
Uhh.. Ok?? Contradictory statements in the same thread. Clarification, anyone??
Click to expand...
Click to collapse
Well there are now a few people who tried it... at my Qtek 8310 it works fine. Make sure your phone is simlock free and it will work...
thanks!!
Excellent input. It is really what I needed! Thanks!
Now I have wm6 in mi smartphone
it dindnt work but how do i now if my 8310 is locked please can somebody help me
bestever said:
it dindnt work but how do i now if my 8310 is locked please can somebody help me
Click to expand...
Click to collapse
Try a other provider sim then yours in it... if you can make a call with it then the phone is simlock free, if you can't then you have to unlock it first...
To unlock it, hit the search button...
Try here:
http://forum.xda-developers.com/showpost.php?p=1936435&postcount=6
Kaiser SuperCID and Security Unlocker v0.1
===============================================
Brought to you by jockyw2001
(c)2008 jockyw2001
Consider a donation to keep the R&D going
Click here to send your PayPal donation.
Download links:
Rapidshare
Megaupload
EDIT: new version v0.2 attached!! Download and unpack the full package from any of the above links and replace kaiser-supercid.exe in the step2 directory
NOTE: THIS TOOL IS FOR DEVS AND POWER USERS. IF YOU ONLY WANT TO SIM UNLOCK THEN USE MY KAISER SIM UNLOCKER HERE
Note for Vista users
===============
This guide will explain how to change your drivers to the xp. You will have problems running the unlocker otherwise. Log in as administrator if you run the ROM update tool and unlocker. That also applies to XP users.
Instructions
============
0. Make sure there is a working SIM in the device.
1. Make sure you installed HardSPL as follows: power off and then press power on while keeping camera pressed, this will enter the so called bootloader mode and you see a tri-color screen (Red, Green, Blue). You should see "SPL-1.0 OliPof" or "SPL-1.1.JockyW" on the second line in the top left corner. You can exit this mode by means of a "soft reset": press the reset button with the stylus. Note that the security unlocker does not work with "SPL-3.28.Hard" and "SPL-3.29.Hard".
2. Make a note of the radio version that is currently installed. You see the version strings in the splash screen which appears soon after power on (e.g. "R 1.27.14.09"). Since we will flash a special radio in step 5 you need to flash back your original radio in the last step. You can download radio roms from XDA devs here.
3. Connect PC and Kaiser with a USB cable and keep it connected until the last step.
4. Power on the Kaiser and let it boot into Windows Mobile. On the PC make sure the activesync icon is green.
5. After you unpacked the download you see directories "step1" and "step2". Go into "step1" and run KaiserCustomRUU.exe. This will flash the special patched radio rom. Follow the instructions until it is finished. IMPORTANT: Make sure that the flash correctly finished. The device will restart automatically once the flashing is completed.
6. Power off and power on in tri-color bootloader mode.
7a. right-click activeync icon and uncheck "Allow USB connections" from Connection Settings
7b. On your PC go into the "step2" directory and run "kaiser-supercid.exe". If all went well you will see the text below
7c. right-click activeync icon and check "Allow USB connections" from Connection Settings
Text shown if all went well:
Code:
=== Kaiser SuperCID and Security Unlocker v0.2 (c)2008 by jockyw2001
=== Donations happily accepted, paypal to [email protected]
[] Done, your device should now be superCID and Security Unlocked
[] Your device is unlocked and you can change anything anytime ;)
[] Don't forget to flash your original radio
Press Enter to exit
If you see this:
Code:
=== Kaiser SuperCID and Security Unlocker v0.2 (c)2008 by jockyw2001
=== Donations happily accepted, paypal to [email protected]
Your CID = HTC__001
[] Failed! Please soft reset and try again
[] To soft reset press and hold camera button and then press reset with stylus
Press Enter to exit
then do a soft reset (press and hold the camera button first and then shortly press the reset button with the stylus) and run "kaiser-supercid.exe" again.
8. Download the original radio from here to the "step3" directory on your PC and flash it with KaiserCustomRUU.exe
That's all folks
Now you can look forward to another great tool which I will release soon: "Kaiser Radio Dumper"
Enjoy and ... donate to keep R&D going! Thx!
JockyW
Credits
=======
* des, pof and olipro for SSPL and HardSPL
* arc and all the other great minds at XDA devs
* viperbjk, adfree and all other QC hackers at Modopo
* Tom Codon for testing
(c)2008 jockyw2001
[email protected]
Jan 21th 2008
===========================================
EDIT
HardSPL with AT Command Interpreter Support
This HardSPL is the perfect companion to your security unlocked Kaiser
None of the HTC SPLs for Kaiser (and other MSM7x00 models sich as Wings, Niki, Polaris etc.) support the AT command interpreter mode. I have patched the olipro HardSPL and added support for AT command mode.
To install it you must run the SSPL (e.g. this one here).
If it installed correctly you will see "SPL-1.1.JockyW" in the top left corner of the tri-color bootloader screen.
Use it as follows:
- enter bootloader (press and hold camera and then press power on)
- type "rtask 4"
- type "rtask 7"
- type "ATE" (turn on screen echo)
- type "ATV1" (verbosity 1)
- type "ATI" (information and IMEI)
- type "retuoR" (return to SPL interactive command mode)
- type "ResetDevice"
There are many interesting GSM AT command interface commands described in the Hermes Wiki.
================================================
Edit2: Kaiser Security Relocker
Some users with a security unlocked device would like to relock it again e.g. for warranty purposes. Unzip kaiser-relock.exe from the attached kaiser-relock.zip into the "step2" directory of the security unlocker (in the same directory there should be kaiser-supercid.exe). Carry out the same steps as for the security unlocker but in step 7b run kaiser-relock.exe
Have fun!
(c)2008 jockyw2001
[email protected]
Feb 6th 2008
Good lord man. Do you ever rest? Way to go.
Edit:
Let me be the first to say, once I tried it, then booted to bootloader mode, directly on the top it said "Security unlocked".
Worked like a champ, as if there was ever any doubt. Way to go again bud.
DAMN MAN!
You said "coming soon", but u didn't say lighting fast!
White Screen fixes, Sim Unlocker, SuperCID & Security Unlocker, Radio Dumper....whats next?!?!
Seriously tho:
Thanks for all the hard work and apps!
you are the master i will be sending you a donation cant wait to try it
Coming soon, I figured atleast a week!
guys what is supercid ?
dang, that quick ???
Thanks a lot.
StashCompInc said:
guys what is supercid ?
Click to expand...
Click to collapse
What I'm wondering is, what is the difference with this and Pof's CID unlocker? What more does this do that Pof's unlocker didn't do?
Wow I am truly impressed!! If you have found a way to dump radios you will be the first ever to go public with that type of app. I know of one other radio.nb dumper that works and I sworn to keep the maker secret! Up until now there was also no free SIMunlocker so your saying you also have a free SIM unlocker? the Kaiser forum thanks you for you efforts in this!
Madness, the man who never sleeps.
Thanks, this is an excellent tool! Your a genius!
WOW.. jockyw simply speechless!!!!!!
Feller is in the zone....
ps worked without a glitch again in Vista (with Vista WMD driver). My simplified way (without downgrading to XP WMD drivers) is just by disabling automatic startup of activesync upon device connect.
is there any difference with this and pof's cid unlock?
i'm asking cuz i already did pof's cid unlock a while ago and i just did ur sim unlock a few mins ago.
will this do anything different?
MistaRip said:
is there any difference with this and pof's cid unlock?
i'm asking cuz i already did pof's cid unlock a while ago and i just did ur sim unlock a few mins ago.
will this do anything different?
Click to expand...
Click to collapse
Iam wondering too, what does SuperCID do anyway? can someone give us some explanation about SuperCID? Can we do this if we already did Pof's CID Unlock and Kaiser Sim Unlocker?
WOW that was fast jocky!
I am awaiting the explanation of super cid vs cid before I go for it..
nice, nice work. Unfortunately I need to also ask the question: what can superCID do that HardSPL hasn't done for us already? please don't flame b/c I really just don't know.
waichai said:
Iam wondering too, what does SuperCID do anyway? can someone give us some explanation about SuperCID? Can we do this if we already did Pof's CID Unlock and Kaiser Sim Unlocker?
Click to expand...
Click to collapse
I could not find an answer to this question elsewhere really but I'm wondering the same thing. Could someone enlighten us?
Still curious..
^^Has same question as above 6 posts.
I think It lets you unlock your extended rom so you can modify it and or flash a different one.
^ correct ^
when i run kaiser-HardSPLv1 its stuck in 0% and after few second give error update..
any one know what i can do for cid unlock my kaiser?thanks for advance
Re: HTC Kaiser wont cid unlock
If you're using vista, try going into mobile device center settings and unselect "Allow USB connections" put your phone in boot loader and try cid unlocking it again. This worked for me.
Good Luck!
i use xp not vista :=(
Re: HTC Kaiser wont cid unlock
Try doing the same thing in xp. Go into connection settings in active syns and un-select allow usb connections and let her rip!
i do that but i cant run this application with bootloader .because its give a MSDOS windows it need activesync for run it.other wayS?
Re: HTC Kaiser wont cid unlock
Here's a bunch of files to aid in your efforts.
http://www.4shared.com/dir/14103843/920c8d51/Hard_SPLS.html
muslim2009 said:
i do that but i cant run this application with bootloader .because its give a MSDOS windows it need activesync for run it.other wayS?
Click to expand...
Click to collapse
Better yet.... Why don't you spend an hour or two reading and learning how to do it instead of asking for a quick fix. You are not better than the rest of us who learned by reading. There are four sticky threads that explain how to unlock your CID and trouble shoot all possible issues.
Mods,
Please close this thread as it is redundant and violates the site rules.
Thread closed.
Please use the existing unlocker or "for newbs" thread for any further issues.
Ta
Dave
Anybody who known how to unlock CID on TyTNII without using ActiveSync.
My phone is stuck in bootloader and I can't use the many tools thats out there to unlock CID because I can't connect it to any PC via ActiveSync.
The phone has never had anything else than original store SPL and OS.
I have read tons of wikis and forums but nobody mention a way to unlock beside the ActiveSync-method. It should be possible to do that via MTTY?
No one? Then I must assume there is no way to change SPL. Sad, I liked my TyTNII.
Hm...
You can buy qmat and try with golden card then you can unbrick tytn2 ,,,
Daniel Henzulea, aka Zulea, said today on gsm forum :
In first days of January 2011 will be an easy EXE application (just ONE button) who will automatically generate Goldcard and will automatically write this to any attached microSD/SD via USB card reader/writter (One Click Goldcard cration in just seconds).
Also, my FREE application will allow to FULL FACTORY UNLOCK (CID, SP LOCK, USER LOCK)
any HTC Android based phone Of course, the solution will work on any device ("S-ON" and "S-OFF", doesn't matter), and after unlocking you will have SIMLOCK removed, SuperCID (11111111) and the device "S-OFF".
We are waiting....sir.
The result still is not present?