Related
Hello! It seems I have the first question with my XDA Exec…
It connects to the PC without problem and I can see it on Windows Explorer (Windows Vista). But synchronization (through Windows Mobile Center)… only completes on the first connection.
If I disconnect from the PC and connect again, most of the times the “Sync” begins but never ends. In these cases, the only solution has been to erase definitions (both on the PC as on the PDA); if so… the next time I connect it does not have the problem, but of course I have to define again what I want to synchronize.
Forgive me if there is already some forum on this issue, I looked for before placing but I did not find.
Some solution? Many thanks and regards from Portugal.
am also having the same problem .. any aid please ?
Same problem here too - device connects, charges, shows in explorer but when WMDC tries to connect the device continues to charge but drops out of explorer.
If I find a solution I'll report back here, meanwhile can anybody save me the heartache?
-sf
Vista Sync Problem
Which version of WMDC are you using?
I am using 6.1.6965 and having no problems. Alternatively, go to the network icon in your task bar after connecting your PPC thru USB and repair connection. This should resolve the problem
I had a similar problem, I reverted to 6.0.6783. Although come to think of it I think this was particular to an app I use, that refused to sync using the later version of WMDC.
Might be worth a try though.
Has anyone applied SP1 yet? What version of WMDC do you end up with?
I seem to remember unticking (and maybe reticking) the "Enable advanced network functionality" on the "USB to PC" applet on "System" tab of Settings.
Can't remember if that's what fixed it.
hey guys, the main problem if ur using an antivirus/internet security or firewall it will be blocked!!
u need to configure ur antivirus/internet security or firewall to allow and solve the sync problems
haardman said:
I seem to remember unticking (and maybe reticking) the "Enable advanced network functionality" on the "USB to PC" applet on "System" tab of Settings.
Can't remember if that's what fixed it.
Click to expand...
Click to collapse
This fixed it for me too, which is interesting given that the general advice is to *enable* it if there are problems syncing. This is definitely what fixed it for me - the device now always syncs on my recently reforatted XP machine whereas previously it was intermittent (which is odd because I'd never experienced problems before, but hey, it's fixed so I don't care any more)
-sf
--------------------------------------------------------------------------------
hey guys, the main problem if ur using an antivirus/internet security or firewall it will be blocked!!
u need to configure ur antivirus/internet security or firewall to allow and solve the sync problems
--------------------------------------------------------------------------------
ditto.... that solved it
Managed to solve the Problem
Hey there guys,
I seemed to be having the same problem anj just solved it...
1 Remove the Enable advanced network functionalty check from the USB to PC connection settings "Start > Settings > Connections > USB to PC".
2 Make sure that the Mobile Device is connected via USB to the PC.
3 Install Windows Mobile Device Center 6.1 (either 32bit or 64bit, I installed 64bit)
4 Open Control Panel on the PC and run Windows Mobile Device Center 6.1
5 At the bottom of the application you will see Mobile Device Settings, and within that you will see Connection Settings. Open the Connection Settings
6 Make sure that the second check box named Allow connections to one of the following is checked, and that the Drop Down below is changed to COM 1 (or which ever COM Port your Mobile Device is connected to via your USB cable) and save the changes
7 Disconnect the Mobile Device and Reconnect and hopefully it will work for you.
I realise that this solution might not work for some, but it did work for me, and hopefully it will work for others.
-----------------------------------------------------
Desktop
Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.4GHz
8gb RAM
Windows Vista Ultimate 64bit
Mobile
Keiser HTC TyTn II
Windows Mobile 6.1
haardman said:
I seem to remember unticking (and maybe reticking) the "Enable advanced network functionality" on the "USB to PC" applet on "System" tab of Settings.
Can't remember if that's what fixed it.
Click to expand...
Click to collapse
Thanks, this worked for me too, unchecked enable advanced network functionality... who woulda thought something advanced would be bad...
problems to Sync with Vista
Hi I followed the instructions but my htc didn't sync, it happens noting, no error, nothing, This happens after apdate my room with Golden Globe Manila2D - 21198/build 21198 Fast and Stable., it works great but sync is dead
osber2003 said:
Hi I followed the instructions but my htc didn't sync, it happens noting, no error, nothing, This happens after apdate my room with Golden Globe Manila2D - 21198/build 21198 Fast and Stable., it works great but sync is dead
Click to expand...
Click to collapse
Wrong forum mate
I understand that you do not own an HTC Universal (Universal not means all HTC devices!, it´s a model. One of the best by the way)
Sync Problem
1 Remove the Enable advanced network functionalty check from the USB to
PC connection settings "Start > Settings > Connections > USB to PC".
2 Make sure that the Mobile Device is connected via USB to the PC.
3 Install Windows Mobile Device Center 6.1 (either 32bit or 64bit, I installed
64bit)
4 Open Control Panel on the PC and run Windows Mobile Device Center 6.1
5 At the bottom of the application you will see Mobile Device Settings, and
within that you will see Connection Settings. Open the Connection Settings
6 Make sure that the second check box named Allow connections to one of
the following is checked, and that the Drop Down below is changed to COM
1 (or which ever COM Port your Mobile Device is connected to via your USB
cable) and save the changes
7 Disconnect the Mobile Device and Reconnect and hopefully it will work for
you.
I already done all the instruction, disable the firewall and antivirus, i also go to device manager too to update the driver/device, but still couldn't connect. Anyone can help me please.
using prophet wm5 upgrade wm6
vista home basic machine
f
haardman said:
I had a similar problem, I reverted to 6.0.6783. Although come to think of it I think this was particular to an app I use, that refused to sync using the later version of WMDC.
Might be worth a try though.
Has anyone applied SP1 yet? What version of WMDC do you end up with?
Click to expand...
Click to collapse
Hi yes i've applied SP1 and my current WMDC is version 6.1.6965 working without any problem......
Cheers
Rajiv
Sync with vista solved!!
Already solved my problem. Stupid me .
popshah said:
Already solved my problem. Stupid me .
Click to expand...
Click to collapse
Ohh Great news.... well enjoy than....
popshah said:
Already solved my problem. Stupid me .
Click to expand...
Click to collapse
How did you resolved the issue???? I have an Iolite which does not synch (connects only as a guest), keep getting the message "there is a problem with your connection........"
any help will be appreciated
Even this is a legacy thread there are some people out there (including me) still using Windows Mobile devices (but also using WP7 ...).
Had exactly the same problem and in my case just using another USB cable did it! It seems that WM devices are a bit "fragile" when using a not 100% perfect USB cable
Hi
I dont have ActiveSync on my laptop.
I want to use WM6 Internet Sharing with USB cable,
but when I connect my EXEC with my laptop,
Windows XP derects PocketPC USB Sync device
and can'r find any driver for it...
What do I need to use Internet Sharing? ActiveSync?
Thx
Yes, depending on wich OS you're using
duanes said:
Yes, depending on wich OS you're using
Click to expand...
Click to collapse
?
I'm using WM6 on my EXEC and Windows XP on my laptop PC... I said that before...
Mr Groch said:
?
I'm using WM6 on my EXEC and Windows XP on my laptop PC... I said that before...
Click to expand...
Click to collapse
You have to install Activesync and will be done. Driver is installed with ActiveSync.
Try this version of AS...
http://winfuture.de/news,27513.html
Internet sharing from your Universal to an XP PC
I had looked for a solution for this for some time, I then tried the following option, which required my computer to be connected to the internet initially, I hope it works for you.
Enable Internet Sharing in your Universal, plug it into your internet enabled XP computer with the normal USB cable (Active Sync if installed should disable and lose it's green colour) your computer at this time should be looking for new hardware drivers, if you enable the option for it to look for drivers on the Microsoft site automatically (this takes some time for your computer to search the microsoft site and find the driver), then it sholud find it.
After the hardware driver successfully installs (forgive me I don't remember the name, it had 'idvendor & modem' somewhere in it) then you should be able to unplug your ethernet cable, USB internet connection, disable your wireless which every it is you use, and as long as you computer is set up correctly (I think automatically acquire DNS and IP , the default or standard settings found in networking should be fine) then you should be able to go through the whole process again and this time your computer has the right drivers and will be able to utilise internet connection sharing through your Universal channeling it through to all programs on you computer
It worked well for me, I had my work station on this internet sharing connection through my Universal and unlimited T-Mobile web&walk for 2 weeks, because when we moved our ISP could not initiate ADSL for that period, everyone in the office would use it and it was constantly logged in to remote exchange server, several instant messaging protocol
and surfed the net easily
Could you please tell me, how do I Enable Internet Sharing on my Universal, i have looked for a way to do it but I cannot find any setting or something similar.
Internet Connection Sharing .cab on XDA Developers
JohnWB said:
Could you please tell me, how do I Enable Internet Sharing on my Universal, i have looked for a way to do it but I cannot find any setting or something similar.
Click to expand...
Click to collapse
Hi, you'll need to find Internet Connection Sharing cab or installer, it is very likely linked to on XDA Developers if you want to do a search, it might even be down loadable from Microsoft's site!
If any one finds one could they post a link?
Hi,
Just bought the official cradle from HTC, plugged it into my PC, but it generally won't sync at all, or when it does it loses the connection again after a few minutes.
Most of the time, once connected, activesync will do nothing at all for about a minute, and then comes up with a dialog saying unable to connect
Also, the light around the touch sensitive button still illuminates to show that it's charging. So there's definitely a connection.
Any clues?
^bump
Can anyone help? I've added a bit more info which might help to diagnose.
I also got the original HTC desktop cradle and it works like a charm for me.
But what you could try is
Start -> Settings -> Tab Connections -> USB to PC and uncheck "Enable advanced network functionality".
This normally solves USB connection problems.
HTH
You're a genius! I could kiss you! XD
DeepThought said:
I also got the original HTC desktop cradle and it works like a charm for me.
But what you could try is
Start -> Settings -> Tab Connections -> USB to PC and uncheck "Enable advanced network functionality".
This normally solves USB connection problems.
HTH
Click to expand...
Click to collapse
Hi DeepThought, have you got an answer for "Windows Mobile Device Center" sync with HTC Pro? I have got vista x64 and it won't sync with MS Outlook
GaZ said:
You're a genius! I could kiss you! XD
Click to expand...
Click to collapse
I'm glad I could help, but please leave it at a hug!
(except if you are the new bond girl )
Cyber-mate said:
Hi DeepThought, have you got an answer for "Windows Mobile Device Center" sync with HTC Pro? I have got vista x64 and it won't sync with MS Outlook
Click to expand...
Click to collapse
Hi!
It just doesn't want to sync with outlook or it does not want to connect at all? If it doesn't want to connect at all: have you tried changing the setting above?
DeepThought said:
I'm glad I could help, but please leave it at a hug!
(except if you are the new bond girl )
Hi!
It just doesn't want to sync with outlook or it does not want to connect at all? If it doesn't want to connect at all: have you tried changing the setting above?
Click to expand...
Click to collapse
It connects & I could explore except that when I select device setup or sync, there when it triggers the error!
Cyber-mate said:
It connects & I could explore except that when I select device setup or sync, there when it triggers the error!
Click to expand...
Click to collapse
You could try to delete the WMDC Partnership when your TP is not connected and than reconnecting your phone. It should as you for a new partnership then and also give you the possibility so sync it with outlook.
Hi guys,I have a problem with my vox..I have a notebook with windows xp and activesync 4.5..I connect it to my phone easily using usb cable (also internet connection works),but there is no way to connect it through BT.I tried to add a new COM port by the phone port but i failed..Could somebody help me to fix this problem?Thank you very much,regards..
old active sync for Windows XP does not include BT connection for sync. Use Windows Vista where you can sync your device via BT. That is the only way how to use BT for sync.
bluetooth and active sync work perfect with xp, try to use generic microsoft driver for bluetooth
nunilo said:
bluetooth and active sync work perfect with xp, try to use generic microsoft driver for bluetooth
Click to expand...
Click to collapse
Drivers work infact I can connect it to my pc through BT (I can also transfer files) but in connection settings on activesync 4.5 cannot find the option "through BT"..There is only sth about COM3/COM4 devices
I would like to share my laptop's internet connection without using usb cable..Please help me!!
ueghio said:
Drivers work infact I can connect it to my pc through BT (I can also transfer files) but in connection settings on activesync 4.5 cannot find the option "through BT"..There is only sth about COM3/COM4 devices
I would like to share my laptop's internet connection without using usb cable..Please help me!!
Click to expand...
Click to collapse
what you need to do is creationg virtual serial ports use your btsoftware for this and then just conenct activesync via this port to your mobile
hashtowent said:
what you need to do is creationg virtual serial ports use your btsoftware for this and then just conenct activesync via this port to your mobile
Click to expand...
Click to collapse
I don't know..Maybe is my BT software because I add for example COM port 6 on my pc and assign Active sync to it,click "allow connection to one of the following devices" COM6,Then from my phone :\activesync\connect via Bluetooth and it says cannot find an existing bt partnership with a pc that supports ActiveSync.Would you like to set a partnership now?
Any suggest?Thanks
I found on another forum a guide to make bluetooth work with activesync under XP.
http://www.modaco.com/content/smart...oof-guide-almost-to-activesync-and-bluetooth/
Sakis said:
I found on another forum a guide to make bluetooth work with activesync under XP.
http://www.modaco.com/content/smart...oof-guide-almost-to-activesync-and-bluetooth/
Click to expand...
Click to collapse
Unfortunately guide link is unavailable....
Hi! well as yoou can see by the thread my diamond will not connect to my computer via activesync or usb. Yet it shows that it is charging. I have tried as much as possible heres a list of what i have. Windows 7, Diamond Windows 6.5 BsBL verion. If anyone has an idea it would be greatly appreciated
Hy,
1. Do you use active sync or the windows mobile device center? You must have windows mobile device center v6.1!
2. What are the active sync settings on your phone?
Greatz
i am using wmdc and i have the setting on active sync normal not with enhanced file transfer
Thanks for helping!
try to delete the partnership on ur device and wmdc. Ball ache to re-sync everything i know, but it works, or should......