I have a Sony Ericsson A2DP Headset. It connects fine for both calls and for listening to music. There is however one small annoying issue.
If I'm listening to music (generally I have to have the volume up quite high) and a phonecall comes in and I take the call; something weird happens when the call ends.
The bluetooth connection is dropped and basically everyone in the vicinity gets and earful of whatever music I was playing before the call. This can be pretty bad if I'm sitting at one of our quiet, open plan offices. If I press the play buttin on my headset it reconnects and audio comes in over the headset again but it's not good to have to do this after every call.
Anyone else had this issue?
Thanks in advance.
Whenever I encounter a quirky bluetooth problem, deleting the pair relationship and repairing sometimes helps.
Works fine for me... Could be headset specific, as I use Motorola S9's and Plantronics 855's without the issue you're having.
It does it for me too. After the phone call the music is played through the phone's speaker for just a couple of seconds, then gets transferred to the headset in mono for a couple of seconds before reverting back to normal.
I can see this would be annoying if you were in a quiet place.
Sony Headset
and me, funnily enough I have a Samsung MP3 player and the headset works perectly with that - good old HTC
Related
this is a major annoyance... I've had a Samsung i760 for a couple months now and have found it seems to have a serious design flaw.
I like to listen to music at work, through my phone using a wired headset (two way headset with mic). I work in a quiet office environment. I always set my ring to silent/vibrate while at work. If I'm listening to music, and happen to receive a call, the music will stop playing through the headset and will start playing through the built in speaker of the phone for all my coworkers and supervisor to hear.
The music would continue to play like this even after answering the call... I have to bring up the player and stop it manually. I was able to partially alleviate this by disabling the 'play in background' setting. With that, the music will still play through the external speaker briefly, roughly 3 seconds, before the player pauses the song. Which is still unacceptable.
I have tried TCPMP and Windows Media and had the same result.
Also, if I have the phone set to ring audibly, the ring is forced through the speaker as well, and the music I was listening to AND the ringtone will play at the same time for those 3 or so seconds.
what I'm hoping someone can help me with is a) a way to make ringtones play through the wired headset if possible, or b) at least keep the sound from being forced through the external speaker when the wired headset is connected and I recieve a call. As it stands, I either can't listen to music at work (a big part of why I bought the phone), or I have to turn the phone receiver off and risk missing calls. Either option sucks and is making consider another phone... though I don't know if this is a WM6 issue or an issue with this specfic phone.
any help would be greatly appreciated!
*bump* anyone?
any way thru the registry to disable the built in speaker alltogether while leaving the headphones operational?
On Acer s200, you can change the value of registry key HKLM\Software\Acer\Scenario\HeadsetIn to 1...
Maybe that can help...
Hi there!
I got my Trinity about 2 weeks ago and got I love that thing...she is so beautiful!
Yesterday I got a good deal on a Sony Ericsson HBH-DS200 Bluetooth Audio Device.
It connects via A2DP and then you can connect any std. 3,5mm jack headphone.
After I pair the devices everything works fine, handsfree and wirless stereo!
Now I disable Bluetooth and turn off the DS200 to shut it down.
Next time I restart Bluetooth and the DS200 it switches to Bluetooth Audio and all is well. But as soon as I try to play music it "skips" in 2-3 sec. jumps. This is as you can imagine not acceptable.
If I delete the conn. and repair it...it works again..up to the point where I turn it off and then on again.
Anybody have an idea?
thx!
pls search a2dpfix to sovel this bug.
but, it will make up to 90% cpu rate.
I got the HBH-DS200 headset, for music it works all fine.
But when i use it in a call the sound are really crappy. A lot of noice and very low volume.
I have tried my headset with other phones without this issue. does anyone have a soluton to have the same clear sound in a phone call as i have when lissen to music
I got the HBH-DS200 headset, for music it works all fine.
But when i use it in a call the sound are really crappy. A lot of noice and very low volume.
I have tried my headset with other phones without this issue. does anyone have a soluton to have the same clear sound in a phone call as i have when lissen to music
(Sorry i dident see this was wrong forum. Its a Tytn II i have)
Is there anyway to fix the Bluetooth streaming? I hoped maybe another audio app would be more streamlined than the one that comes preloaded with the phone, but they don't allow me to stream music through bluetooth. Right now my phone sucks at streaming music, even when I close every other app open. My last phone never had any problems at all with A2DP, but I can't get this one to play music at the same level which is a major buzz kill. If no fixes are known, is it reasonable to think that this situation might be alleviated with the Froyo update?
I'm having the same problem, and it's a deal breaker for me. I need the bluetooth A2DP to work. This same headset worked on my Fuze for over a year. When I use the headset on the Captivate, the sound starts and after a minute it fades out to nothing. I've tried Dogg Catcher and the default player.
I dont know...I got a blueant Q1 when I bought the phone and I've no issues using mortplayer, default video player, pandora and radiotime over it.
I did have one problem, when i first connected it, my bluetooth was connected as a single bluetooth. I disconnected and unpaired, then repaired and instead of the phone icon next to my bluetooth device in settings I now have a headset icon. So any sound whatsoever that comes over the phone from 'tap' sounds to games to music comes over my blueant....
Main thing I had to do was unpair and repair to make sure I had headphones icon next to my bluetooth device in Settings-wireless and network-bluetooth settings
I am hoping we can get better sound quality with Froyo. My Old Tilt sounded better than this.
I figured it out. My headset is a Jabra 8010. Factory default on the headset fixed it. First I unpaired it from the phone, just for good measure. Turned off the media player, turned off the bluetooth signal and headset. Turned the headset, defaulted it, then turned on the phone's bluetooth, then the player. Not sure if all that was needed but, it's working.
And the sound is much 'richer' than when it was paired with my Fuze.
How is the Bluetooth audio quality on the S6? I use many wireless headphones and speakers so this is an important factor for me. Is it true that the Bluetooth audio randomly stops sometimes?
Mine randomly starts to skip and pop after some time playing. Turning the BT off/on fixes it for a while.
The problem is worse when paired with my Bēm speaker, rare when paired with my JBL speaker, and nonexistent when paired with my Sony soundbar.
All of these speakers work fine with my other devices.
I only use bluetooth with my truck's stock stereo, but this is the first Android device I've had paired with it that doesn't skip over BT. I've used it with S6, Note 3, Note 4, S5 Active, S4 Active and iPhone 6+. iP6+ was the only other one that didn't skip.
S5 Active and Note 3 also skip with a Jensen BT Nav headunit in a different vehicle.
An update to my previous comment..
I went for an hour-long drive and experienced no skipping or popping while paired to my car's stereo.
It seems the issues are only with specific Bluetooth receivers/speakers.
I can get on-board with this. I have a few different bluetooth devices, all of which have no trouble, ever, but then sometimes (and ONLY sometimes) my BT headphones will skip and stutter to the point that I just turn them off. The other devices work fine 100% of the time.
I'm at my wit's end with the bluetooth on this device. It skips and stutters more times than not. It's embarrassing when friends are over and we're trying to have some background music playing.
xxbeanxx said:
I'm at my wit's end with the bluetooth on this device. It skips and stutters more times than not. It's embarrassing when friends are over and we're trying to have some background music playing.
Click to expand...
Click to collapse
No BT problems here. Maybe you have a defective phone. Take it back to the store and try to exchange it. There is no excuse for crappy BT on a $700+ device.
My wife has an S6 also, with the same issues.
I have FINALLY noticed an issue with the BT on my phone. When connected to my truck and listening to music, I go to a call (incoming or outgoing doesn't matter), when the call ends and goes back to the music, the volume "flutters". It goes low/high/low/high alternating twice a second. It's a very slight change, but it's enough to notice that it sounds "weird".
Exiting and restarting PowerAMP, or switching to a different input then back to the BT audio stream will fix it, so I haven't figured out if it's the phone or my truck.
So, this is a weird one, and chances are none of you will ever experience it, but maybe you might know how to fix it.
I use a Moto Hint "earset" to listen to podcasts with Pocket Casts and audiobooks with Audible. When I get into the car, the car tries to pair with the phone, but since my car only has phone bluetooth and not audio bluetooth support, I don't bother disconnecting the Hint and plugging in an audio cable unless I'm going further than a few minutes.
But whenever the car tries to connect to the phone, the audio stops. ONLY if I'm using Pocket Casts! And ONLY with the Moto Hint! Audible works fine. My Plantronics headset works fine. Waze works fine.
I've contacted Pocket Casts as well, but I don't expect them to treat this as a red ball