Is there anyway to fix the Bluetooth streaming? I hoped maybe another audio app would be more streamlined than the one that comes preloaded with the phone, but they don't allow me to stream music through bluetooth. Right now my phone sucks at streaming music, even when I close every other app open. My last phone never had any problems at all with A2DP, but I can't get this one to play music at the same level which is a major buzz kill. If no fixes are known, is it reasonable to think that this situation might be alleviated with the Froyo update?
I'm having the same problem, and it's a deal breaker for me. I need the bluetooth A2DP to work. This same headset worked on my Fuze for over a year. When I use the headset on the Captivate, the sound starts and after a minute it fades out to nothing. I've tried Dogg Catcher and the default player.
I dont know...I got a blueant Q1 when I bought the phone and I've no issues using mortplayer, default video player, pandora and radiotime over it.
I did have one problem, when i first connected it, my bluetooth was connected as a single bluetooth. I disconnected and unpaired, then repaired and instead of the phone icon next to my bluetooth device in settings I now have a headset icon. So any sound whatsoever that comes over the phone from 'tap' sounds to games to music comes over my blueant....
Main thing I had to do was unpair and repair to make sure I had headphones icon next to my bluetooth device in Settings-wireless and network-bluetooth settings
I am hoping we can get better sound quality with Froyo. My Old Tilt sounded better than this.
I figured it out. My headset is a Jabra 8010. Factory default on the headset fixed it. First I unpaired it from the phone, just for good measure. Turned off the media player, turned off the bluetooth signal and headset. Turned the headset, defaulted it, then turned on the phone's bluetooth, then the player. Not sure if all that was needed but, it's working.
And the sound is much 'richer' than when it was paired with my Fuze.
Related
Hi,
I searched the forum, wiki, etc., but didn't find an answer.
I have an AT&T Fuze with the stock ROM (WM 6.1). I know the Fuze is supposed to support multiple simultaneous bt connections. What I would like to do is connect A2DP to my Pioneer stereo for music playback, and also connect handsfree to my Jawbone 2 headset for phone calls while in the car.
I can successfully connect A2DP to my stereo for music by itself.
I can successfully connect HFP to my Jawbone 2 by itself.
I *have* managed to connect to both at the same time, by staying on an active phone call with my Jawbone, then telling my Fuze to connect to the car stereo. However, no music could be heard (from either Mortplayer or WMP). The phone call stayed up just fine though.
Anyone know if there's a way to get both working at the same time?
(And before you ask, I would just use the hands-free capability of my Pioneer stereo for phone calls too, but I've found my car is too noisy for anyone to hear me with the Pioneer's microphone unless I hold it right in front of my mouth, which defeats the "hands free" goal...)
Thanks for any help you can offer.
Best,
Chris
In your case I do not think that is possible since the concept of being able to juggle 2 devices at the same time requires 1 to relinquish control while the other goes active. It turns off the music so you do not get distracted while talking and reconects the music after the call is over.
It seems to be a software protocol if anything. Yes both can be connected at the same time, but both cannot be "active" as in doing both music playback and voice calls.
I have a bt headset that handles 2 profiles at once and according to the protocol, if a call comes in, it pauses my ipod and then picks up the call and then resets back to normal after the call.. Either you have to mess with the coding itself or someone has to come up with a workaround, but I do not think that is possible.
Thanks for the reply. I had hoped it might be possible for the Fuze to route stereo audio to one BT profile (A2DP), while non-stereo audio (e.g., phone call, system tones, etc.) to the HFP profile, almost as though the profiles acted as addressable "service ports" (ala HTTP, SMTP, etc.).
But, unlike with TCP/IP, I admit to knowing next to nothing about how the BT stack works and how profiles are applied to certain types of data (or, how data is routed to a given BT association based on profile).
Thanks again,
Chris
well the thing is.. the fuze can connect to multiple devices simultaneously, but based on the music and voice call order, it is prohibited from doing both at the same time. so therefore when there is no call, the music plays, but when a call comes it, the music is paused and resumed after the call is done. (obviously the call has higher priority here).
My only suggestion is to leave it as it is since it is done so that you do not get distracted while talking and probably while you're driving.
Multitasking is difficult when you're listening to 2 things, responding to 1, and driving at the same time. The more you multitask the less you are able to devote to your main activity (in your case, driving).
but yeah. if you can find someone who can mess with that and allow for both to be active at the same time, then congrats. Otherwise just think of it as a safety measure.
Except that, when I had both the headset and the stereo connected to the Fuze, the music *didn't* pause. It just didn't output (as though the volume was muted). In fact, in both Mortplayer and WMP, it appeared as though it was playing at ~2X the normal rate (just watching the track playback time counter).
I know what you're talking about re: listen to music, call comes in, music pauses, call ends, music resumes. That's the behavior I get when I use the car stereo for both handsfree and A2DP.
The behavior when connected to two different devices seemed to be different, though, so I hoped that might mean it was in fact possible.
-Chris
yeah I know what you mean, but maybe the fact that it tried to do both tripped it up and so it took the call as a higher priority and focused the data towards the call.
atleast that is what I think.
I have almost the exact same configuration, except I am using a Sony car stereo but have a jawbone. What I have to do every time I get in the car is the following.
1. Let my stereo connect to both hands free and wireless headphone services.
2. Open bluetooth settings
3. Manually connect to my Jawbone.
It works great.
ATT Fuze
Energy Rom 072209
Old jawbone
Sony XPLOD Car Stereo
I'll also add it's pretty neat to be able to push the jawbone to activate MS Voice Commander and choose what music I want to play over my car stereo.
frankrizzo said:
What I have to do every time I get in the car is the following.
1. Let my stereo connect to both hands free and wireless headphone services.
2. Open bluetooth settings
3. Manually connect to my Jawbone.
It works great.
Click to expand...
Click to collapse
Thanks for the reply. I'll give that a shot. I'm not sure that my Pioneer stereo will automatically connect both handsfree and A2DP. I know it will do handsfree automatically. We'll see...
-Chris
Yesterday morning i got my Tilt (Hyperdragon III ROM) off the charger and noticed that the bluetooth icon on the start bar was different. It had a headphone icon around it, instead of the headphone icon with a music note inside it. (I looked for pictures on the intertubes, but couldnt find an example).
Anyway, I'd seen the icon before, but only when I had a meeting reminder going off or if I accidentally activated voice tags. I thought it was odd, so I put my Plantronics 220 headset on and tried to play some music just to see what would happen.
For an hour, I was able to listen to music through my headset! When I got into my car to go to work, the icon went back to a normal bluetooth icon and my music switched to the phone's speaker. I think the reason it did that is because the phone automatically connected to the BT Speakerphone in my car. I've not been able to listen to music through my headset since.
I've tried and tried to make this happen again, and the only thing I can do is get 3-4 seconds of audio through the headset if I activate voice tags. I've read about a third party app that toggles audio output between the headset and the speaker, but I didnt have any interaction with any app when this happened yesterday.
Any idea how I was able to do that?
could be it hands-set vs. wireless stereo bluetooth connection ?
That's how mine delineates between the two...
No. If I go into the properties for my headset, the only profile is "Hands Free"
Hi,
Yesterday, I installed a new car stereo and after a lot of frustration installing it, I was happily surprised the A2DP worked by default, just paired my touch pro with my stereo, start playing in wmp and it comes through my stereo system. However during the day I started looking for another player to use (during my breaks of course ) and installed pocket music player bundle ( I don't know if it has anything to do with my problem, just trying to include as much info as I can ). In the evening I enabled bluetooth of my phone again, I think I also had the headphone logo, but when trying to play using pocket music player and wmp, it always just used the speaker of the phone and didn't seem to send anything through A2DP.
Any idea how this can be? Is there a setting somewhere to change what audio is used (A2DP/Speaker/ whatever...)?
TIA!
OK, this seems to have been quite stupid.
Haven't been in my car since, but same behaviour with my logitech a2dp bluetooth headset.
Going into bluetooth settings, "right click" on logi_stereoV01 and "instellen als draadloos stereo" (set-up as wireless stereo) did the trick, probably the same for my CAR--BT,sorry for the stupid post.
Although it would be nice if the touch pro would automatically set the detected bluetooth device as wireless stereo every time, just as it seems to do for setting it headset when in range while turning on the bluetooth.
Sorry for the strange sentences... it was a long day
same problem
i just bought a bluetooth receiver for the car.
it fits in the lighter place and transmits via FM to the car radio.
My htc connected staight away (no code required to me) with the new "car Kit" found, but whatever i try i always have the sound from the htc speaker...
How can i solve this?
Thanx in advace.
I used to have a Galaxy SII that was able to connect to my car stereo through bluetooth with no issue.
With the Tmobile One S, often time my phone does not full connect it will do things like only connect for phone use but not for listening to music. I also used to be able to control moving the songs and I can no longer do that. I also cannot get the metadata to show up on the car display.
Many times a reboot will hook the audio up and I can listen to music, but I still can only go forwards and backwards by using the phone.
Is anyone else having issues like this?
Yep, I got the same issues....A2DP sync problem.
Does it sync your phone contacts too. If so change what contacts are synced only allow google contacts. This was a solution for a similar issue in another thread.
Sent back in time to find Marty.
No, I don't sync my contacts...worked perfectly with MyTouch4G...also noticed headset droid and jays headset control take away Bluetooth control capability...anyone know a work around besides disabling?
Same issue here with my bluetooth headset (Cardo scala rider G4) and HTC One X.
Since installing Jays headset control for my Jays One+ (which is a one-button wired headset) my bluetooth headset control fails big time. I can only use my headset play functionality and after disconnecting the headset the music player starts playing music again within a couple of minutes.
I'll try to disable Jays headset control and let you know if this resolves my bluetooth problems.
how do/when do you select which contacts to send to headset? Didn't see an option for this in Bluetooth settings.
I received the Tmobile update today and I still have the issue of the phone not transmitting the metadata to my radio. Interestingly enough when I stream Pandora the data from pandora shows on my radio display.
Do any of you all know of a ROM that will allow the metadata to be sent from my phone to the radio?
This is the only thing that really annoys me about this phone. Thinking of selling it when the SIII comes out.
How is the Bluetooth audio quality on the S6? I use many wireless headphones and speakers so this is an important factor for me. Is it true that the Bluetooth audio randomly stops sometimes?
Mine randomly starts to skip and pop after some time playing. Turning the BT off/on fixes it for a while.
The problem is worse when paired with my Bēm speaker, rare when paired with my JBL speaker, and nonexistent when paired with my Sony soundbar.
All of these speakers work fine with my other devices.
I only use bluetooth with my truck's stock stereo, but this is the first Android device I've had paired with it that doesn't skip over BT. I've used it with S6, Note 3, Note 4, S5 Active, S4 Active and iPhone 6+. iP6+ was the only other one that didn't skip.
S5 Active and Note 3 also skip with a Jensen BT Nav headunit in a different vehicle.
An update to my previous comment..
I went for an hour-long drive and experienced no skipping or popping while paired to my car's stereo.
It seems the issues are only with specific Bluetooth receivers/speakers.
I can get on-board with this. I have a few different bluetooth devices, all of which have no trouble, ever, but then sometimes (and ONLY sometimes) my BT headphones will skip and stutter to the point that I just turn them off. The other devices work fine 100% of the time.
I'm at my wit's end with the bluetooth on this device. It skips and stutters more times than not. It's embarrassing when friends are over and we're trying to have some background music playing.
xxbeanxx said:
I'm at my wit's end with the bluetooth on this device. It skips and stutters more times than not. It's embarrassing when friends are over and we're trying to have some background music playing.
Click to expand...
Click to collapse
No BT problems here. Maybe you have a defective phone. Take it back to the store and try to exchange it. There is no excuse for crappy BT on a $700+ device.
My wife has an S6 also, with the same issues.
I have FINALLY noticed an issue with the BT on my phone. When connected to my truck and listening to music, I go to a call (incoming or outgoing doesn't matter), when the call ends and goes back to the music, the volume "flutters". It goes low/high/low/high alternating twice a second. It's a very slight change, but it's enough to notice that it sounds "weird".
Exiting and restarting PowerAMP, or switching to a different input then back to the BT audio stream will fix it, so I haven't figured out if it's the phone or my truck.