Hi there!
I got my Trinity about 2 weeks ago and got I love that thing...she is so beautiful!
Yesterday I got a good deal on a Sony Ericsson HBH-DS200 Bluetooth Audio Device.
It connects via A2DP and then you can connect any std. 3,5mm jack headphone.
After I pair the devices everything works fine, handsfree and wirless stereo!
Now I disable Bluetooth and turn off the DS200 to shut it down.
Next time I restart Bluetooth and the DS200 it switches to Bluetooth Audio and all is well. But as soon as I try to play music it "skips" in 2-3 sec. jumps. This is as you can imagine not acceptable.
If I delete the conn. and repair it...it works again..up to the point where I turn it off and then on again.
Anybody have an idea?
thx!
pls search a2dpfix to sovel this bug.
but, it will make up to 90% cpu rate.
I got the HBH-DS200 headset, for music it works all fine.
But when i use it in a call the sound are really crappy. A lot of noice and very low volume.
I have tried my headset with other phones without this issue. does anyone have a soluton to have the same clear sound in a phone call as i have when lissen to music
I got the HBH-DS200 headset, for music it works all fine.
But when i use it in a call the sound are really crappy. A lot of noice and very low volume.
I have tried my headset with other phones without this issue. does anyone have a soluton to have the same clear sound in a phone call as i have when lissen to music
(Sorry i dident see this was wrong forum. Its a Tytn II i have)
Related
i have a XDA2i and a jabra 250v, when i turn on the headset the XDA responds by showing the headset icon, it also shows the icon showing sound is comming from the headset, and in the headset you can her a crackley sound. This is normal to me and has done it with other jabra headsets and also on the XDA2s.
But my point is today soon after turning on the headset in my ear i heard a reminder going off, so i started media player and played 10 mins of a film i had on my SD card, then a MP3 track, all with the audio comming from the headset not the XDA.
i had never tried this befor, as i stated it oftern shows the sound comming from headset icon, and a crackle is heard in my ear and i just quickley send and end a call and this disnonects the audio, but leaves the headset connected.
as this worked for audio is there a way to make it work properley ie you have the abilaty to turn the feature on and off
Thanks
John
Is this possible with o2 mini?
Anyone with o2 mini have got this experience?
Regards,
Arto.
What bluetooth headsets will work with the touch diamond?
other question: why should there be any headsets not working?
i have a really cheap but nice looking samsung headset, no problem to get paired with the diamond. should work with any other headset, too!?
My existing is just a cheap iTouch bluetooth headset and it works perfectly.
I don't think Diamond has any problem to work with other brands.
I have an old Motorola Bluetooth headset (4 Years) and it will not pair with my Diamond. Looks like its time to upgrade to a Jawbone!! hehehe
i have the jabra bt3030
its a stereo bluetooth headset working on A2DP
works great and looks awesome!!
So can I listen to music through any bluetooth headset (that has headsets to play music)?
My Plantronics P590 works like a charm
DiamondMflexx said:
i have the jabra bt3030
its a stereo bluetooth headset working on A2DP
works great and looks awesome!!
Click to expand...
Click to collapse
Say something about the sound, it is better (or/and louder) then original HS or same quality?
Here you go!
dave94o said:
So can I listen to music through any bluetooth headset (that has headsets to play music)?
Click to expand...
Click to collapse
Theres a app called btAudio (keep a google-eye open for newer versions) that does exactly this, it will send ALL sound to the headset, despite of what windows had in mind for the sound (as in if it was gonna use headset or build-in speaker)
Tho, it sometimes chokes when you dont shut down the app before you disable the bluetooth headset or phones bluetooth function, but i guess that kinda makes sense (its even sayd in the program to not do that, but im a sucker for trying such things hehe)
And another thing, this happend for me too (taken from comments on some site, linked below)
The program runs well however if you try to make a phone call with the blue tooth ear piece while the program is active the program is not available after the call is completed.
I had to reset my phone to enable the program again. - source of comment
Guess thats related to windows not being to happy theres multiple apps using the headset, lets hope for a next version which auto-disables when calling and re-enables when u hang up.
I'm waiting for this one (Jabra BT530, due end August according to Play.com)...
http://www.mobilefun.co.uk/product/16778.htm
Got the manual that Jabra put up on their support site for a day or two before taking it off. Manual says it also supports A2DP and can stream music.
And what about battery life? Could somebody using bluetooth stereos write how long the Diamond can last, and what is the overall impact on battery life while listening to music?
I use this headset, its got very good sound and is also nice and comfortable, since i have my tragus peirced i cant wear "normal" headphones!
http://www.amazon.co.uk/Sony-DRBT20...6?ie=UTF8&s=electronics&qid=1216998998&sr=8-6
It also works on my pc and my PS3 as a wireless headset/mic!
I have proper enclosed stereo headphones Dell DH-200 with volume control, next and previous track plus play/pause buttons and it all works fine with HTC DT. The only think I am not sure about is which profile it is using, the sound is not as good as when I have it paired with my laptop, which would suggest a low speed profile as opposed to HQ.
You can change the bluetooth profile in Schap's Advanced Config. I've set bitpool to 70, max to 76 and min to 64. Now the sound quality is waaay better.
I can't connect my Jabra 320's (worked with SE W880i) to BT Stereo, it only see's the headphones as a handsfree unit on the HTC
Jawbone. Nothing else comes close (for hands free anyway!). And the new one even matches the Diamond... sort of!
Has anyone suffered the sound periodically dropping out for a second or two, mainly during the first minutes of connection but still persisting now and again several tracks down the playlist?
I have a Sony Ericsson A2DP Headset. It connects fine for both calls and for listening to music. There is however one small annoying issue.
If I'm listening to music (generally I have to have the volume up quite high) and a phonecall comes in and I take the call; something weird happens when the call ends.
The bluetooth connection is dropped and basically everyone in the vicinity gets and earful of whatever music I was playing before the call. This can be pretty bad if I'm sitting at one of our quiet, open plan offices. If I press the play buttin on my headset it reconnects and audio comes in over the headset again but it's not good to have to do this after every call.
Anyone else had this issue?
Thanks in advance.
Whenever I encounter a quirky bluetooth problem, deleting the pair relationship and repairing sometimes helps.
Works fine for me... Could be headset specific, as I use Motorola S9's and Plantronics 855's without the issue you're having.
It does it for me too. After the phone call the music is played through the phone's speaker for just a couple of seconds, then gets transferred to the headset in mono for a couple of seconds before reverting back to normal.
I can see this would be annoying if you were in a quiet place.
Sony Headset
and me, funnily enough I have a Samsung MP3 player and the headset works perectly with that - good old HTC
Is there anyway to fix the Bluetooth streaming? I hoped maybe another audio app would be more streamlined than the one that comes preloaded with the phone, but they don't allow me to stream music through bluetooth. Right now my phone sucks at streaming music, even when I close every other app open. My last phone never had any problems at all with A2DP, but I can't get this one to play music at the same level which is a major buzz kill. If no fixes are known, is it reasonable to think that this situation might be alleviated with the Froyo update?
I'm having the same problem, and it's a deal breaker for me. I need the bluetooth A2DP to work. This same headset worked on my Fuze for over a year. When I use the headset on the Captivate, the sound starts and after a minute it fades out to nothing. I've tried Dogg Catcher and the default player.
I dont know...I got a blueant Q1 when I bought the phone and I've no issues using mortplayer, default video player, pandora and radiotime over it.
I did have one problem, when i first connected it, my bluetooth was connected as a single bluetooth. I disconnected and unpaired, then repaired and instead of the phone icon next to my bluetooth device in settings I now have a headset icon. So any sound whatsoever that comes over the phone from 'tap' sounds to games to music comes over my blueant....
Main thing I had to do was unpair and repair to make sure I had headphones icon next to my bluetooth device in Settings-wireless and network-bluetooth settings
I am hoping we can get better sound quality with Froyo. My Old Tilt sounded better than this.
I figured it out. My headset is a Jabra 8010. Factory default on the headset fixed it. First I unpaired it from the phone, just for good measure. Turned off the media player, turned off the bluetooth signal and headset. Turned the headset, defaulted it, then turned on the phone's bluetooth, then the player. Not sure if all that was needed but, it's working.
And the sound is much 'richer' than when it was paired with my Fuze.
I have a Plantronics Voyager Legend Bluetooth headset which I use with the Nexus 5.
(Almost) every time I make a call, the headset first blips and you can see in the dialer that Bluetooth is chosen for sound output.
But just after dialing, the audio is back at the phone (handset earpiece). So I have to switch to Bluetooth again. Then during calls, sometimes the audio is routed back to the phone again.
It always works when you move it back to the Bluetooth headset again but it is very annoying.
Phone has stock 4.4.2-latest.
Any other threads about this? Bugs @ Google? Couldn't find anything..
I guess it depends on the Bluetooth device you're using. My nokia bluetooth headphones work perfectly where as I face similar problems like you when I'm using it in my car.
Maybe try the app soundabout from the playstore. Seem to work (sometimes) on my N4 when I had phone audio problems.
Easy solution to my problem: Unpaired the headset and paired it again, now it works as expected!