Hello, this is my first Post in this Forum.
I recently got a HTC Touch Pro and installed Morphgear and PocketGBA.
Now i have a Problem with assigning the keys propery..
I would like to use the Keyboard (W,A,S,D) for the directional pad (Up, Down, Left, Right).
But every key gets the same Keycode, in morphgear it is 229 and in PocketGBA its 00E5.
Now when i press a key in a game, every command (Up,Down,Left,Right) gets done at the same time.
Both emulatores worked fine with the Keyboard of the Tytn II.
I already searched in different Forums, Google etc. but could not get any answer.
It would be cool if anyone could help me with that.
Greetz!
Edit (Seems to be the same Problem here):
http://forum.xda-developers.com/showthread.php?t=423444
Face buttons/controller?
Hello,
Sorry to not have an answer for you but I am also considering this phone. I have a tilt and can't do without morphgear (which works fine for me using the buttons on the face of the phone).
I have a question for you: are you unable to use the controls on the face of the touch pro with morphgear? Or do you simply prefer the keyboard as a controller.
Any information on this is much appreciated...
Thanks!
I wrote a small application for Raphael which made it possible to map the following buttons in emulators (e.g. PocketSNES, Morphgear...etc) and some games possibly:
A, S, X, Z, 1, 2, -, =, backspace, enter, left, right, up and down.
Usage:
1. Download the cab and install.
2. Start Menu -> Programs -> Games -> Run "K for Raphael."
3. Launch any emulator and you can set the buttons mentioned above to keys in game.
Please note that this is just a workaround, as you can see the key code catched by the target application is not the actual key code of the hardware button. So, please remember to close this application when you no longer need it.
If you need more keys to be in the white list, please let me know.
I hope HTC can pay more attention to this problem. Nothing's more shameful than paying $800 for a full QWERTY device just for text messaging and web browsing.
Is it possible to have the keys send the code they are supposed to send? I'd like to run some dos games on some dosbox clone, but if they don't get proper keypresses it's useless?
hi there, im got an HTC touch pro too, but i downloaded PocketGBA and i cant install it, when i try to install it, it says installation was unsuccesfull... i dont understand why...
a frind got a HTC touch and it works with his phone..
why is that??
and sry for my english..!!!
thx
I am using MorphGear and it is really good. Especially now when we can use the keyboard!
marios96 said:
I am using MorphGear and it is really good. Especially now when we can use the keyboard!
Click to expand...
Click to collapse
coul u put the link please or pm me please.. i dowloaded one, but seems its broke..
dilta said:
I wrote a small application for Raphael which made it possible to map the following buttons in emulators (e.g. PocketSNES, Morphgear...etc) and some games possibly:
A, S, X, Z, 1, 2, -, =, backspace, enter, left, right, up and down.
Usage:
1. Download the cab and install.
2. Start Menu -> Programs -> Games -> Run "K for Raphael."
3. Launch any emulator and you can set the buttons mentioned above to keys in game.
Please note that this is just a workaround, as you can see the key code catched by the target application is not the actual key code of the hardware button. So, please remember to close this application when you no longer need it.
If you need more keys to be in the white list, please let me know.
I hope HTC can pay more attention to this problem. Nothing's more shameful than paying $800 for a full QWERTY device just for text messaging and web browsing.
Click to expand...
Click to collapse
Great could you make a fit for azerty TP ?
dilta said:
I wrote a small application for Raphael which made it possible to map the following buttons in emulators (e.g. PocketSNES, Morphgear...etc) and some games possibly:
A, S, X, Z, 1, 2, -, =, backspace, enter, left, right, up and down.
I hope HTC can pay more attention to this problem. Nothing's more shameful than paying $800 for a full QWERTY device just for text messaging and web browsing.
Click to expand...
Click to collapse
Just question, when I click on " TF3D Toogle " but got a error message " cannot toggle TF3D plug-in "... Did I missing something?
rayho said:
Just question, when I click on " TF3D Toogle " but got a error message " cannot toggle TF3D plug-in "... Did I missing something?
Click to expand...
Click to collapse
I forgot to mention that you don't need to toggle TF3D to enable the keyboard mapping function.
Please ignore the TouchFLO 3D Toggle button. Thanks to the fact that TF3D almost consumes no CPU time when it's in the background. After some tests, I found the toggle nearly useless.
BTW... I'll try to spend some time dealing with the key code problem this weekend. I myself also got some games to play with DOS emulators. sigh...
cool, if you manage to get it working for all the keys, ill might donate a small amount if you give us your paypal, and maybe even some other people?
With the workaround listed above, what's the maximum number of action buttons you can currently have - besides the directional buttons on the keyboard?
Also - if you use that workaround, can you perform diagonal motion by hitting two buttons at once?
A, S, X, Z, 1, 2, -, =, backspace, enter, left, right, up and down
That is a total of 10 action buttons and 4 directional!
marios96 said:
A, S, X, Z, 1, 2, -, =, backspace, enter, left, right, up and down
That is a total of 10 action buttons and 4 directional!
Click to expand...
Click to collapse
Thanks for clearing that up - that's awesome. I thought that portion of the post meant that the letter buttons REPLACED the 4 directional buttons. So I thought there might only be the 4 directional buttons and 2 action buttons.
What about diagonals - or pressing 2 buttons at once? Can the Raphael handle it?
P0ll0L0c0 said:
Thanks for clearing that up - that's awesome. I thought that portion of the post meant that the letter buttons REPLACED the 4 directional buttons. So I thought there might only be the 4 directional buttons and 2 action buttons.
What about diagonals - or pressing 2 buttons at once? Can the Raphael handle it?
Click to expand...
Click to collapse
YES! Emulating games on TP is awsome! Every game I tried worked great with MorphGear...
Hey guys . I didn't want to start another topic. As long as you talking about emus, i got a question about them. Can you recomend me best emus for Snes, Genesis, Nes, GBA, SEGA MasterSystem and SCUMMVM (lucas arts old point & click games) From what i understand there are diferent emus on the net , please tell me what is the best one. Aso does Sega Cd works thrue some Genesis emus
Thanks in advance
tokitad said:
Hey guys . I didn't want to start another topic. As long as you talking about emus, i got a question about them. Can you recomend me best emus for Snes, Genesis, Nes, GBA, SEGA MasterSystem and SCUMMVM (lucas arts old point & click games) From what i understand there are diferent emus on the net , please tell me what is the best one. Aso does Sega Cd works thrue some Genesis emus
Thanks in advance
Click to expand...
Click to collapse
In fact would be a great idea
guys , anyone?
just download a bunch and test them for yourself, or try and use the search function before asking
KforTouchPro is released
I figured out the way to let you map keys to their correct key codes. The problem lies in the built-in M5 IME, which intercepts virtual key codes sent by the OS without proper handling.
This release of KforTouchPro simply allows you to switch between M5 and your system default IME as the "preloaded IME" at run time.
Instructions:
1. Download & install the CAB.
2. To play emulators/games, click on the "Disable M5 IME" button of KforTP.
Unlike KforRaphael, you may close KforTP after disabling M5.
Congratulations, your hardware keyboard now talks directly to the M$ IME in correct key codes.
3. When you want your M5 functions back (auto-completion/auto-corrections), just click on the "Enable M5 IME" button. No soft reset is needed.
Afterall, I still didn't feel so good for the need to switch between two modes: gaming & typing. Maybe M5 & HTC should be responsible for this.
BTW.. I just put a relay IME between your current preloaded IME and the M$ default IME. Thus, it should be working even if the bundled IME is not M5.
Reminder: Don't forget to backup your device before giving it a try.
Updated GMT+8 6:41 PM: I am sorry for causing system crash for some users. The attachment was temporarily removed. Now I only get positive confirmation from traditional Chinese devices. I'll try to figure out the reason causing the crashes.
Related
i mean, is that possible to develop a SW for ppc,
Which shows a mouse in ppcs screen, and we can use navigator key control the mouse.
That's quite easy, but would there be much point?
The program you're using would then loose use of the control pad.
An idea tho would be, say:
Record button toggles mouse (shows/hides cursor)
Joystick/pad controls mouse cursor
Contacts button sends left click
Calendar button sends context menu click.
It could work. I might play with this sometime. :wink:
V
there is a soft for virtual mouse
if u have a ppc with usb host function then u can connect ur computer's mouse to the ppc using the usb connection there is a software available for the mouse pointer here's the link
http://www.deje.gmxhome.de/download.html
u can make it someting special.
for exmaple.
in SW setting we can choose by which programme activating the mouse.
Re: there is a soft for virtual mouse
dhiraj228 said:
if u have a ppc with usb host function then u can connect ur computer's mouse to the ppc using the usb connection there is a software available for the mouse pointer here's the link
http://www.deje.gmxhome.de/download.html
Click to expand...
Click to collapse
yes i know about this.
but a virtual mouse does not mean only a tool to control the ppcpe.
it can be very helpful for one hand ppcpe operating.
sometimes we have only one free hand to use ppcpe.
Hi vijay or other developer
Any development/thought on virtual mouse - I like the idea of non stylus control of my wizard esp when in case. You could assign a button to switch on and off. You could call it VJmouse or VJrodent I would pay for this - I know that's music to your ears
Cheers
generating mouse clicks is easy enough but the drawing of the cursor in different locations would be the harder part. I have not seen cursors drawn in places other than the centre. How could that be done without drawing to the screen buffer?
One possible idea is a transparent window, say a 16 by 16. Any way I just wanted to mention that HP iPaq 4700 has a native app in its ROM that shows a mouse cursor and lets the arrow key area act as a touch pad just like on a laptop.
Guys, this is by the guy that did the FileDialogChanger, a genius in his own time:
http://www.geocities.co.jp/SiliconValley-Cupertino/2039/FakeCursorPPC.zip
Please indicate if it does or doesn't work. I don't think it would be too difficult to write a new mouse emulator, but there's no point reinventing the mouse wheel :wink:
V
Thanks vijay that's wicked
Finally true one handed operation of my pda - es
So I want have to pay you all my bucks after all!
I have tried this app and it is really good but has a couple of bugs. one is that it won't delete or backspace on the virtual keyboard, second it call and end call buttons and softkeys are immobilized when the fake cursor is operational. If it could be developed further and possibly include other pointer styles it would be an excellent app - I think marketable and some thing that should be part of the OS.
Smartphone users will be particularly interested as I am being a long trrm spv user.
cheers
wicked man... I like it
kudoos to the developer
vijay555 said:
That's quite easy, but would there be much point?
The program you're using would then loose use of the control pad.
An idea tho would be, say:
Record button toggles mouse (shows/hides cursor)
Joystick/pad controls mouse cursor
Contacts button sends left click
Calendar button sends context menu click.
It could work. I might play with this sometime. :wink:
V
Click to expand...
Click to collapse
I'd be interested in a "mouse" or "Cursor control" app.
IMHO the one thing missing from the Universal is a "clit-mouse" (the tiny joystick type thing you used to get on Laptops). I dont' think it would have been that hard to implement physically either.
vijay555 said:
Guys, this is by the guy that did the FileDialogChanger, a genius in his own time:
http://www.geocities.co.jp/SiliconValley-Cupertino/2039/FakeCursorPPC.zip
Please indicate if it does or doesn't work. I don't think it would be too difficult to write a new mouse emulator, but there's no point reinventing the mouse wheel :wink:
V
Click to expand...
Click to collapse
can someone describe exactly what this does?
Does it slow the device down at all?
(and has anyone translated the txt file in that zip???? )
Yes works qute will as a cursor / mouse you can control with d-pad. no does not slow device down and no can't translate txt but is quite self explanatory when you use. Give it a go tis cool!
Find attached for other users in case link goes down
I have added mouse cursor just place in same directory as fake cursor.exe and you will have typical mouse pointer.
meschle said:
Yes works qute will as a cursor / mouse you can control with d-pad. no does not slow device down and no can't translate txt but is quite self explanatory when you use. Give it a go tis cool!
Find attached for other users in case link goes down
Click to expand...
Click to collapse
I assume the .exe in the zip is for installing over Activesync? Or is it run on the PPC itself?
Run on ppc itself - i stuck it in \program files\
custom cursor
If it could be developed further and possibly include other pointer styles it would be an excellent app - I think marketable and some thing that should be part of the OS.
Click to expand...
Click to collapse
Just put any 16 color win95 cursor file in the same directory as FakeCursor.
a program called GoldIcon creates cursors that are compatible with FakeCursor.
I love this app, I have a top soft key dedicated to this so I can activate/deactivate it at any time.
there is no installation; the EXE can be located anywhere on the device and creates 2 lnk files in windows/startmenu/programs when run:
FakeCursor.lnk (toggle on and off) and FakeCursor Settings.lnk
Doesn't seem to be anything FAKE about it. It's a real Dpad mouse!
Thanks for the tip - do you have any you could post particularly mouse style pointer.
thanks
can you use XP mouse pointers, I havent seen a win95 machine for years.... or if you have one around would be great if you could simply post a few.
hi all,
i am almost certainly getting this phone, but i am still very curious about it's ability to handle console emulators, specifically the NES emulator. i have a titan/mogul now which is damn near the perfect NES emulator since it has 2 buttons above the screen when held in landscape, has the button setup of a NES controller.
the only flaw with the mogul is that it can only support 2 simultaneous button presses....this becomes a problem in say a mario game, where you want to run and jump with precision(hold dpad left + b, then press a). i have learned to live with this, but i am worried that the touch pro might actually be worse when it comes to emulators....
will someone who has a TP please test a few NES or SNES games and answer my few Q's?.....PM me if you need an emulator or a few ROMs to perform the test.
since the TP doesn't have buttons on the top of the sceen, i think i'd end up playing the games in portrait with the dpad and the right 2 buttons as a&b(onscreen controls are notoriously sucky)....
1) is the emulator playable in this setup?
2) can the TP register 3 simultaneous button presses(a running jump in mario)?
how about with the keyboard slid out in landscape....
3) does 3 simultaneous button presses register?
4) with the TP being twice the resolution of the mogul, but only having a slightly more powerful processor, how do the emulators perform? i'm kind of worried about SNES/Genesis playability.....
Thanks.
yerp
Most emulators seem to work fine - I tested many. Those who don't are mostly stuck in irrelevant things (like the file requester!).
I haven't tested any simultaneous controls though (or in fact anything on NES/SNES).
PM me to see if I can help.
tip
you should consider keeping your current device on the side.
i found the tp not realy suited for fast paced games because of the lack of buttons, the inabilty to map the existing buttons, and the inability to effectively use the buttons. `real` buttons such on the wizzard and polaris i owned will kick the tp`s touch dpad`s behind with two fingures in the nose.
Hi,
Is there nobody that has had a working SNES emulator for the TP? I have tried some like PocketSNES but like someone stated above, you can't succesfully map the hardware keys. Anyway is there someone who has a tip for a good SNES emulator for the TP
Greetz
Hey everyone,
this thread is for your videos and comments playing any game on your HD2 with FPSECE. I will post some videos time by time and i hope other support this thread too to show other others how nice the HD2 can be
Tekken 3
http://www.youtube.com/watch?v=GfGoa6jmTFk
MediEvil 2
http://www.youtube.com/watch?v=corgVPZlHcA
Quick guide
http://www.youtube.com/watch?v=63XAci8jDgg
How to exit FPSECE 0.10
http://www.youtube.com/watch?v=BVSdGQ69OcY
FPSECE 0.10 and HTC HD2 - Best Of playing Games
http://www.youtube.com/watch?v=fgiSFzd9kdo
FPSECE 0.10 and HTC HD2 - Install / Configure / Play - Complete HowTo incl BGP100 Gamepad
http://www.youtube.com/watch?v=Kb3MJAQMrCE
FPSECE 0.10 can be found on fpsece.net. The 0.10 is the newest version of the "First PlayStation Emulator for windows CE" (the one before is 0.96 - i know the version numbers are a bit squishy ...).
For information about how to set up FPSECE 0.10 go check i900frenchaddict on youtube. He has a lot of videos which help. But its for a TG1 so it might differ in some points. Maybe im going to record the same stuff for HD2.
In free version there is no G-Sen, Gamepad, Multitouch support for HD2
For the supporter version:
-Gsensor working with every HTC including HD2
-MSI BGP100 bluetooth gamepad working for the HD2 (and every device) without extra drivers
-The delay when you touch the screen is now fixed, no delay at all!
-Overlay in Tekken 3 are back!
-Multitouch is working now
Videos by i900frenchaddict:
G-Sen HowTo
http://www.youtube.com/watch?v=nOcvM8bHiZM
HD2 with MSI BGP100 (doesnt seem to run with every BGP100)
http://www.youtube.com/watch?v=_667zwB3nLE
Can you be a bit more specific about where we can find this emulator and about the games for it? I like it very much but I'm a bit noob to Windows Mobile so I will be glad to have a little more details on the subgect. Thanks in advance!
hey, no problem. i thought it was clear but i see i was wrong ... edit will follow in just a moment
hi, you can configure the the controls like video... you cn share the ini with congure?
in my HD2 the fpsece run but faults only the controls...
[zozi] said:
hi, you can configure the the controls like video... you cn share the ini with congure?
in my HD2 the fpsece run but faults only the controls...
Click to expand...
Click to collapse
Just read the manual or the other Fpsece thread; you need to configure the vol up and down button to play Tekken 3 because of the input delay.
Final Fantasy VII and VIII plays perfectly.
Go check http://www.youtube.com/user/i900frenchaddict especially http://www.youtube.com/user/i900frenchaddict#p/u/2/SVm1tg6H90Q. It helped me to understand how the setup works.
fpse.ini
[FPSE]
DisclaimerAgree=1
LastGPU=gpusoftdx.dll
LastSPU=0peopspu109.dll
LastJOY0=joy0pse.dll
LastJOY1=joy1key.dll
LastCD=cdrimage.dll
LastPAR=parnull.dll
CDCountry=1
UseOtherMDEC=off
CDUseCache=off
CDCacheSize=16384
CDStreamSpeed=0
CpuMode=on
CpuMode2=off
ShowGenCode=off
AutoSpeed=on
MDEC_bw=off
DisableEngines=off
DisableLogo=on
EnableHLE=off
EmuConsole=off
UseSubQ=on
CacheSubQ=off
BiosName=SCPH1001.BIN
RomName=SCPH1001.BIN
MemCard1=slot1.mcd
MemCard2=slot2.mcd
ArmCoreV5=on
ArmCoreMMX=off
UseSerial=off
ComPort=COM2
Verbose=off
Disasm=off
Debugger=off
EnablePCDRV=off
PCDRV_RO=off
CDDA2SPU=off
HideMouseCur=off
RunSPUsync=off
SmartChnRead=off
EnableDatel=off
IgnoreCdErrs=on
[PocketPC]
Onscreen_OC14=0
Onscreen_O14=0
Onscreen_14=0
Onscreen_OC13=0
Onscreen_O13=0
Onscreen_13=0
Onscreen_OC12=0
Onscreen_O12=0
Onscreen_12=0
Onscreen_OC11=0
Onscreen_O11=0
Onscreen_11=0
Onscreen_OC10=0
Onscreen_O10=0
Onscreen_10=0
Onscreen_OC09=0
Onscreen_O09=0
Onscreen_09=0
Onscreen_OC08=0
Onscreen_O08=0
Onscreen_08=0
Onscreen_OC07=0
Onscreen_O07=0
Onscreen_07=0
Onscreen_OC06=0
Onscreen_O06=0
Onscreen_06=0
Onscreen_OC05=0
Onscreen_O05=0
Onscreen_05=0
Onscreen_OC04=0
Onscreen_O04=0
Onscreen_04=1
Onscreen_H=3
Onscreen_W=5
Onscreen_OC03=0
Onscreen_O03=0
Onscreen_03=0
Onscreen_OC02=0
Onscreen_O02=0
Onscreen_02=0
Onscreen_OC01=0
Onscreen_O01=0
Onscreen_01=0
Onscreen_OC00=0
Onscreen_O00=0
Onscreen_00=5
Main_Volume=1
Da_Volume=1
Xa_Volume=1
Isos_PATH=\Storage Card\ROMS
GFXDRV=2
Orientation=0
FpsCount=on
EnableSound=on
Stretch_x=0
Stretch_y=0
Start_y=10
SoundVolume=10
PadType=1
FullScreen=1
Stick_Left=0
Stick_Right=0
Stylus_Wide=20
Sensor_Zx=700
Sensor_Gpz=127
Sensor_Mpz=200
Sensor_Npz=20
Sensor_Gpx=127
Sensor_Mpx=200
Sensor_Npx=20
Stylus_Mode=1
Sensor_Mode=0
[GPUSOFT]
Odd_Even_Fix=0
Busy_Fix=0
Lazy_Update_Fix=0
High_Res_Boot_Fix=0
Frame_Skip_Mode=0
[JOY0KEY]
AutoRotate=0
MultiFix_GunB=0
MultiFix_GunA=0
MultiFix_Left=16777344
MultiFix_Down=16777220
MultiFix_Right=524288
MultiFix_Up=4
MultiFix_Select=50331680
MultiFix_Start=33554464
MultiFix_Quadrangle=34078720
MultiFix_Triangle=33554448
MultiFix_Circle=34603008
MultiFix_Cross=50331664
MultiFix_L1=0
MultiFix_L2=0
MultiFix_R1=0
MultiFix_R2=0
MultiFix=0
Button8=0
Special8=0000000000000000
Button7=0
Special7=0000000000000000
Button6=0
Special6=1000000000000000
Button5=0
Special5=0000000010000000
GunB=87
GunA=81
Up=69
Down=88
Left=83
Right=70
Start=112
Select=113
Triangle=80
Quadrangle=76
Circle=8
Cross=13
L1=0
L2=86
R1=0
R2=66
Special1=1000000010000000
Button1=87
Special2=0010000010000000
Button2=82
Special3=0001000001000000
Button3=0
Special4=0001000010000000
Button4=79
[JOY1KEY]
Up=38
Down=40
Left=37
Right=39
Start=112
Select=113
Triangle=69
Quadrangle=83
Circle=68
Cross=88
L1=81
L2=87
R1=82
R2=84
Device=0
Switch=8
An1Up=89
An1Down=66
An1Left=71
An1Right=72
An1Action=86
An2Up=73
An2Down=77
An2Left=74
An2Right=75
An2Action=78
[SPUPeops]
UseXA=1
Volume=1
XAPitch=0
UseTimer=0
SPUIRQWait=0
DebugMode=0
RecordMode=0
UseReverb=0
UseInterpolation=0
DisStereo=0
UseDBufIrq=1
Click to expand...
Click to collapse
Tekken 3.ini
[FPSE]
DisclaimerAgree=1
LastGPU=gpusoftdx.dll
LastSPU=0peopspu109.dll
LastJOY0=joy0pse.dll
LastJOY1=joy1key.dll
LastCD=cdrimage.dll
LastPAR=parnull.dll
CDCountry=1
UseOtherMDEC=off
CDUseCache=off
CDCacheSize=16384
CDStreamSpeed=0
CpuMode=on
CpuMode2=off
ShowGenCode=off
AutoSpeed=on
MDEC_bw=off
DisableEngines=off
DisableLogo=on
EnableHLE=off
EmuConsole=off
UseSubQ=on
CacheSubQ=off
BiosName=SCPH1001.BIN
RomName=SCPH1001.BIN
MemCard1=slot1.mcd
MemCard2=slot2.mcd
ArmCoreV5=on
ArmCoreMMX=off
UseSerial=off
ComPort=COM2
Verbose=off
Disasm=off
Debugger=off
EnablePCDRV=off
PCDRV_RO=off
CDDA2SPU=off
HideMouseCur=off
RunSPUsync=off
SmartChnRead=off
EnableDatel=off
IgnoreCdErrs=on
[PocketPC]
Onscreen_OC14=0
Onscreen_O14=9
Onscreen_14=257
Onscreen_OC13=0
Onscreen_O13=10
Onscreen_13=259
Onscreen_OC12=0
Onscreen_O12=0
Onscreen_12=0
Onscreen_OC11=0
Onscreen_O11=0
Onscreen_11=0
Onscreen_OC10=0
Onscreen_O10=27
Onscreen_10=25
Onscreen_OC09=0
Onscreen_O09=11
Onscreen_09=260
Onscreen_OC08=0
Onscreen_O08=12
Onscreen_08=258
Onscreen_OC07=0
Onscreen_O07=0
Onscreen_07=0
Onscreen_OC06=0
Onscreen_O06=0
Onscreen_06=0
Onscreen_OC05=0
Onscreen_O05=0
Onscreen_05=0
Onscreen_OC04=0
Onscreen_O04=3
Onscreen_04=261
Onscreen_H=3
Onscreen_W=5
Onscreen_OC03=0
Onscreen_O03=0
Onscreen_03=0
Onscreen_OC02=0
Onscreen_O02=0
Onscreen_02=0
Onscreen_OC01=0
Onscreen_O01=0
Onscreen_01=0
Onscreen_OC00=0
Onscreen_O00=0
Onscreen_00=0
Main_Volume=3
Da_Volume=0
Xa_Volume=1
Isos_PATH=\Storage Card\ROMS
GFXDRV=2
Orientation=0
FpsCount=on
EnableSound=on
Stretch_x=0
Stretch_y=0
Start_y=10
SoundVolume=10
PadType=1
FullScreen=1
Stick_Left=2
Stick_Right=0
Stylus_Wide=20
Sensor_Zx=700
Sensor_Gpz=127
Sensor_Mpz=200
Sensor_Npz=20
Sensor_Gpx=127
Sensor_Mpx=200
Sensor_Npx=20
Stylus_Mode=1
Sensor_Mode=0
[GPUSOFT]
Odd_Even_Fix=0
Busy_Fix=0
Lazy_Update_Fix=0
High_Res_Boot_Fix=0
Frame_Skip_Mode=0
[JOY0KEY]
AutoRotate=0
MultiFix_GunB=0
MultiFix_GunA=0
MultiFix_Left=16777344
MultiFix_Down=16777220
MultiFix_Right=524288
MultiFix_Up=4
MultiFix_Select=50331680
MultiFix_Start=33554464
MultiFix_Quadrangle=34078720
MultiFix_Triangle=33554448
MultiFix_Circle=34603008
MultiFix_Cross=50331664
MultiFix_L1=0
MultiFix_L2=0
MultiFix_R1=0
MultiFix_R2=0
MultiFix=0
Button8=0
Special8=0000000000000000
Button7=0
Special7=0000000000000000
Button6=0
Special6=1000000000000000
Button5=0
Special5=0000000010000000
GunB=87
GunA=81
Up=69
Down=88
Left=83
Right=70
Start=112
Select=113
Triangle=80
Quadrangle=76
Circle=8
Cross=13
L1=0
L2=86
R1=0
R2=66
Special1=1000000010000000
Button1=87
Special2=0010000010000000
Button2=82
Special3=0001000001000000
Button3=0
Special4=0001000010000000
Button4=79
[JOY1KEY]
Up=38
Down=40
Left=37
Right=39
Start=112
Select=113
Triangle=69
Quadrangle=83
Circle=68
Cross=88
L1=81
L2=87
R1=82
R2=84
Device=0
Switch=8
An1Up=89
An1Down=66
An1Left=71
An1Right=72
An1Action=86
An2Up=73
An2Down=77
An2Left=74
An2Right=75
An2Action=78
[SPUPeops]
UseXA=1
Volume=1
XAPitch=0
UseTimer=0
SPUIRQWait=0
DebugMode=0
RecordMode=0
UseReverb=0
UseInterpolation=0
DisStereo=0
UseDBufIrq=1
Click to expand...
Click to collapse
Not sure if it helps but these are my *.ini's
How do I use these .ini files for my phone?
I have everything working on my HD2 but I battle to play the games because I cant configure the controls even with the help of the video's.
One question that I cant figure out is how to bring back the FPSE menu once you have activated the game in landscape? I have to pull out my battery and restart to "exit"...
stefanfuchsuk said:
One question that I cant figure out is how to bring back the FPSE menu once you have activated the game in landscape? I have to pull out my battery and restart to "exit"...
Click to expand...
Click to collapse
Tap the very top right hand corner of your HD2 screen to flip it back to portrait.
Note: Tekken 3 may bring problems in displaying the overlays of the onscreen buttons due to its specific patch (that can be removed but the game may be slower, see tekken3 in the gamelist file and see tekken3 config file if you want to try removing this patch)
So if you have difficulties in setting the overlays, don't try with tekken 3 at first, try any other game, Tekken 3 is the only one with that kind of overlay problem
(I would say a not too fast RPG is good to learn how to use the onscreen buttons. And once again, HD2 users will have to wait for Schtruck to work a little more to get fast and responsive onscreen controls since the capacitive screen and its bad compatibility with WinMo 6.5 has brought new problems including a big delay on the onscreen keys, that doesn't occure with a resistive screen)
The G sensor doesn't work on my HD2 ! Is there any plug in I have missed?
Its not a feature with the HTC HD2 yet.
I have driver 2 and wipeout working like a dream on my hd2, except the screen is far to sensitive and makes it impossible to drive.
Any settings to change this?
Why are there two threads on the FPSECE when most of the questions and replies in this thread are of the same type in the other thread?
basically this thread is for the gameplay showed in videos and for sure people will ask how it works if it doesnt for them.
later on i will give you guys a video of MediEvil 2 on HD2 but atm i still play with the setup. Hardware buttons doesnt have a delay but the game gets a bit laggy
Did someone get the G-sensor working?
nope, for gsen working under HD2 we have to wait for next version (ive read this somewhere, cant remember where).
See first post, ive added MediEvil 2 video
added a quick guide for those who really dont have a clue what to do with fpsece
FFVII is...not really working. The sound is cutted but the game speed is always at 61f/s.
But the big problem for me is the virtual pad. It responds very slowly and the multitouch isn't working at all.
I don't know if that because I don't have the good bios or else, but it's quite unplayable.
Someone have a clue ?
lets say it this way: there is no HD2 support at the moment but it will change soon. FPSECEs core is rewritten and there is support for the TG01 (g-sen) as far as i know. So 0.10 works much better than 0.96, so far i didnt have any problem to open a rom. my guess: still the problem is there are many different devices and this emulator depends on the hardware of a device (kind of screen, hardwarekeys, bluetooth for gamepads differs, etc.).
But somewhere on http://www.fpsece.net ive read about one of the guys of fpsece will get a HD2 soon and there will be support for it
Hum...I see, I misunderstand "multitouch screen" and "on-screen multi-touch button-assignment".
Then I'll wait for another release. FFVII will wait for me too ! ^^'
Straynart said:
Hum...I see, I misunderstand "multitouch screen" and "on-screen multi-touch button-assignment".
Then I'll wait for another release. FFVII will wait for me too ! ^^'
Click to expand...
Click to collapse
Why can't you just set some of your keys to toggle? Did this for FFVII and FFVIII and it works beautifully.
Is there a way of submitting Alt commands via an Android keyboard to my windows PC?
I presently use Air Mouse on an Ipod Touch to control my HTPC remotely.
This is the only use I have for the thing and I'd like to think that there will be the perfect Android solution for me soon.
The benefit of Air Mouse over RemoteDroid and GMote is the Alt key ability which neither of the Android apps have (or if they have I haven't found it yet), a function I find a lot of use for.
(I should add that the only Android device I have at present is an HTC Desire....so I guess that could be the limitation rather than the apps)
I don't really understand what you mean by alt key ability. Could you please explain, and maybe we can help sugest a solution?
What is it that this alt key ability of air mouse do, or more importantly, what is it that you want to accomplish with such an alt key ability?
Thanks for the reply, I had a feeling I wasn't being very clear.
I'd like to use my Android device as a trackpad and mouse for my HTPC.
My media player of choice (MPC-HC) uses a lot of keyboard shortcuts with the "Alt" signifier. For example Alt+X closes the program. These shortcuts are especially important because the program runs in a fullscreen mode which removes any context menus.
All the various android soft keyboards I have seen have no Alt key so I would lose a lot of functionality controlling the HTPC from an android device.
I have read that pressing the trackball twice on an HTC Desire may be a substitute for pressing the "Alt" key but have never got this to work in practice.
Just found an app that might suit your needs. I suggest you check it out.
GRemote Pro
Edit:
Ok, I just tried this app out, and it does exactly what you need.
It comes packed with an app alt, ctrl, tab and del buttons that let you alt+tab among other things.
I didn't see MPC-HC in the server setup, but that's not a problem as you can configure your own profiles with specific commands.
Fair warning, it's a bit on the slow side (seems to be a port of a winmo app), but I'm sure it'll get better with time and updates. It's a very polished Remote app for android and it even comes with drivers for a G-sensor controller to play games with (use android as wii-mote/controller).
This app defenitly rocks.
You sir (or madam) are a legend.
I was disappointed at first to see that this app doesn't simply add Alt and Ctrl keys to the standard keyboard, but it does allow considerable control of the media player directly.
Need to have a much longer play to see if it's really what I need...but I appreciate your effort already.
Another Suggestion
Have you tried unified remote?
It's got a full windows keyboard, You can create your own custom remotes and if you wanted, you could even have multiple droids connected.
Yes, this reply is s bit late, but better late than never
try Hackers Keyboard
I installed hackers keyboard and tried to activate it. It gives a prompt message that this will collect all information except passwords, including personal data and credit card numbers....!!!
Dosbox Turbo was just updated to allow Xperia Play button mapping / screenshot of the new mapping page attached
FTAiii said:
Dosbox Turbo was just updated to allow Xperia Play button mapping / screenshot of the new mapping page attached
Click to expand...
Click to collapse
SWEET....... now... time to fire up WING COMMANDER...... HAHAHAHAHA
...If this works as it should there are some amazing possibilities here.
It doesn't seem to allow for different mapping profiles for different games, just 1 generic mapping, but agree - lots of possibilities !
I'm gonna go work up some mappings for Ultima IV !
Ahh i tried to search for people discussing this and i didn't find anything and posted a topic lmao... some1 shared the link to here.
$2.99 tempting. Now while Wing Commander was already said.. Ill say another that I could see myself playing..
Shufflepuck Cafe and Bar Games!
Hrm.. Install Win95.. yes this could have some options..
Just bought it myself
been playing
commander keen
jill of the jungle
sim city 2000
monster bash
castle of the winds
daggerfell
Does this mean you could play Daytona USA on the xplay?
I remember playing Daytone USA in DOS mode back in the day.
Ok with the on screen mouse, I just got done playing Nukewar (Fun fun game)
Playing Bargames right now. Need to map the X to be the enter button.
Also learned the option use the dpad as an input toggle is worth using. Easier for those up down left rights in the game.
Profile mapping WOULD be nice.
Edit: Ok one flaw in this program.. How on earth can I map the space bar or the enter key to a button...? So many games play like this.
Could someone check Sensbile World Of Soccer 98, Manchester United The Double and Lous 1,2,3 ? How does it works ? I thinking about buying this emulator.
TheVicious said:
Could someone check Sensbile World Of Soccer 98, Manchester United The Double and Lous 1,2,3 ? How does it works ? I thinking about buying this emulator.
Click to expand...
Click to collapse
So far, every game I have tried worked without config. Also Any GoG game that uses dosbox works. (Oooo I forgot.. I can play Dungeon Keeper on android now)
ONLY issue I have seen be meh, is that I cant map enter or spacebar to a gamepad key. Also has sometimes an issue with screen rotation. (Gets stuck in landscape mode sometimes when I NEED it vertical while I type on keyboard) Minor gripe, but so far its solid.
Just contacted the dev of dosbox turbo with the comments from this thread. He said the ability to map enter and spacebar will be in the next release. Also I asked about the possible profile loading for those who needs "x" mapping for "x" game.
Oh god, if this thing can actually run daggerfall fullspeed I'm gonna cry. Did anyone try that? How does it run? And what about the controls? On andosbox it ran really slow, and I couldn't get some of the controls to even work.
Interesting, Managed to get a Windows 95 image booted, it crashed the explorer.exe but still started up.. http://vogons.zetafleet.com/viewtopic.php?t=24936 to make your own win 95 image (if you dont just download a predone one)
This really is starting to look good. =D
Hello Everybody,
I'm the author of DosBox Turbo. One of the members here kindly pointed out this thread to me today and suggested I drop by.
Wanted to let you know that I'm sorry for leaving out the "Enter" and "Space" mappings, it just slipped my mind! But, the good news is, I'm finishing up a quick bugfix release (v1.2.1) and some of the new Xperia Play specific features I already have completed include:
Ability to map Enter & Space to an Xperia Button
Ability to see what current button mappings are w/o having to select each one.
Once I'm finished testing this release, I'll push it out to the Android Market (sometime on Mon or Tue).
I'd be very interested to hear your feedback/suggestions for new features, as I do not have an Xperia Play, so I'm just coding this stuff up without really having a chance to test it. Some of the new features I have planned for the very near future include being able to use the Analog touchpad on the Xperia Play as a true analog joystick, as well as supporting saving button/configuration profiles.
Cheers,
Gene
Thanks for taking the time to drop in and let us know what you have in the pipeline, i actually just bought your app earlier today and have been playing raptor call of shadows, im also looking around for other dos classics i missed when i was younger, the games i would never probably bother with on a pc haha.
the suggested improvements are pretty much everything i could ask for off the top of my head, keep up the good work.
Gene.. Question, Can one do a Ctrl+Alt+Del? Also later down the road, a "windows" key could be good.
Been fiddling with this booting of Windows 95 lol. Another thing that could be nice is a "reset dosbox" option in menu vs "exit" and reloading.
Mysticales said:
Gene.. Question, Can one do a Ctrl+Alt+Del? Also later down the road, a "windows" key could be good.
Been fiddling with this booting of Windows 95 lol. Another thing that could be nice is a "reset dosbox" option in menu vs "exit" and reloading.
Click to expand...
Click to collapse
As far as I'm aware, DosBox proper doesn't support a reset function or CTRL-ALT-DEL (correct me if I'm wrong). I did a bit of research on this, and it seems to be somewhat difficult to implement (reference this thread over in the DosBox forums) for various reasons. On Android, it would be possible to kill the app and restart it via a button, but it wouldn't be much different than hitting exit and starting over. I'll look into a way of cleanly implementing such a feature in a future version if you guys feel it would be beneficial.
By the way, there is a thread over on the ASUS transformer forums with some people having success running Windows 95/98. I also recorded a video of an old version of DosBox Turbo running Windows 95. I apologize in advance for the poor video quality and lack of sound (I was using an old camera phone to record it).
Edit: I forgot to answer your Q. about the windows key. I'll add the windows key for you extreme users running Windows. =)
[post deleted]
Mael5trom said:
Thanks for taking the time to drop in and let us know what you have in the pipeline, i actually just bought your app earlier today and have been playing raptor call of shadows, im also looking around for other dos classics i missed when i was younger, the games i would never probably bother with on a pc haha.
the suggested improvements are pretty much everything i could ask for off the top of my head, keep up the good work.
Click to expand...
Click to collapse
Sure! Happy to drop in an answer some questions. I'm a big RTS Fan (Warcraft II, etc). In case there are any other RTS fans here, I can certainly recommend playing Warcraft II and set the Mouse Tracking mode to "absolute" and in the Gesture Configuration map the Double-Click to "right click". This will allow you to tap once for left click, and double-tap for rightclicks to move units. Long Press and drag your finger to highlight units. Makes playing RTS games very comfortable on the Touchscreen alone.