Touc Pro Att how to reset no customizations? - Touch Pro, Fuze General

I know with the ATT Tilt you could master reset it with holding two buttons and pushing reset button, then when it started installing customizations you could push reset button again to stop it from installing ATT crapware.
Is there a way to do this with the Touch pro coming to ATT?

There probably will and i'm guessing it'll be the same procedure.

cool, thx I will look forward to getting this

Related

Hard Reset Dilemea

So some of you might recall that I got a fake IPhone with Windows Mobile and it was working great, but now it won't boot, it'll sit at the blue Windows Mobile screen and not advance from there. I've tried pulling the battery and it doesn't help. Obviously I'd try a hard reset but the only buttons I have are, the on/off switch, a soft reset button, a camera, some sort of back button and 2 volume buttons. I've tried a combination of those buttons and I do recall getting a blue screen a while ago but none of those combinations have worked this time.
Can anyone help?
EDIT: FIXED!!!!!! Camera+Volume Up gave me a blue screen, after that it booted! So I didn't get any sort of tri-coloured screen but the blue screen seem to have Hard Rest it maybe.
Umm, obviously this thread is sort of pointless now but if someone else has a Daxian X999 and has the same problem then this should help them.
Thanks
Seems like i'm the first to try your way of hard reset with this phone. Thanks a lot, I thought my phone is dead, and now it works perfect.
What is a "fake iphone with windows mobile"?
Chinese knockoff?
jep kinda "chinese knockoff"
but its a quite good phone, though...
i just wish it would be possible to upgrade the os to wm6.1
It works but you have to push the camera the up volume and the power key at the same time. you get a blue screen then the windows screen.
It does not work with mine. I still receive only the Windows Mobile screen.
I worked for me a few times and now it just sits at that blue windows mobile screen and then it goes to a white screen or a tri color screen. And it wont boot any further. Anybody got a idea how to get it back up. I called the place i got it from and they dont answer the phone and dont return calls. Tronicvasion is the place i got it from. Their customer service stinks. I feel like i am let hanging, kinda stinks spending 437 bux for a 1 month old phone that crapped out. But i am glad i still have my trusty Tmobile Wing tho.
have you figured out how to hard reset? it isnt working, and I cant bypass the unlock code..
Hard reset is done as explained in the 1st post here, by holding a combination of buttons and then the power button, or the reset. now you have 4 buttons plus the power button, hold the upper ones (one side camera, other side volume up) in and then press the power button. Keep the buttons pressed for a couple of seconds thou. If the phone is on, you can do the same but instead of power, press the reset.
One last thing i saw is if i hold the vol up and vol down then reset, it does not reset, but only stay on blank screen, this might be helpful for some one who's hard reset does not work.
I also suggest removing all sim and memory cards before a hard reset.
Even thou my phone is "branded" Chinese knock off I personally think it's great, and very stable
Happy to have a iphone lookalike running Micro$oft Windowzzzzzz

Ran Flash-SPL and Unlock Radio - Pixelated Boot?

Hey guy,
Did I just brick my new Tilt? I downloaded the KaiserUnlock took with the nifty 3 steps button and ran the first two; after restarting from step 2 - after the AT&T bootscreen it's all just pixelated crap. It's obviously alive and active-sync's but I can't use it.
Can I recover from this?
Thanks!
Jeremy
Did you read the textbox that popped up on your screen before clicking the ok button? Because I think that will have your answer.
Ummm
The one that said are you sure? I can't do a hard reset because I can't read my screen to touch anything (and I think I need to for the hard reset?)
Ah Ha
OK, Apparently my fat fingers just had a hard time with the soft keys. Leave it to the fairer sex
Jeremy
Well..
ok the hard reset worked - it reloaded all the settings and then after it was done customizing everything it booted back up into pixel land?
Well
anyone? I'm frantic here
triksterut said:
The one that said are you sure? I can't do a hard reset because I can't read my screen to touch anything (and I think I need to for the hard reset?)
Click to expand...
Click to collapse
No. The one that said you may need to upgrade to Windows Mobile 6.1 before continuing....
I'm assuming that you're using Olipro's kit. You really might want to read through that thread.
Thought about that
But I can't upgrade anything; it won't even active synch after the radio upgrade?
put your device in bootloader and flash from there
How do I force it into boot loader mode? Is there a keyboard combination?
Jeremy
why do you even jump straight into doing this without doing any research first??
http://wiki.xda-developers.com/index.php?pagename=HTC_Kaiser
look for kaiser resets, and whatever questions you have next, just read the upgrading section.
the straight answer
the straight answer is hold down power key and camera press reset button on bottom with stylus and hold to side keys till 3 graidents. plug in and upgrade to a windows mobile 6.1 rom. i did the same thing because i was rushing... sometimes you have to learn the hard way to read before you leap.
Heck I know that before I did anything that would have royally mucked up my $400 phone I wanted to make sure that I read everything I was going to do to it .... twice.
Bootloader
* Press and hold the Camera button
* Using a stylus, press and hold the soft reset button at the bottom of the phone
* Release both buttons once the bootloader screen appears
From wiki
PS Sorry, I did not read until the end of the tread.
Press and hold the camera button, then push the stylus into the reset hole near the USB connecter, while still holding the camera button.
*edit* Oops, missed the fact there was a page two, bit late on the details there..

hard reset? how to..

im wondering how to do a hard reset on the cruise? can anyone help with this. having some dramas with new rom and not sure how to do a hard reset, after rom installed,as suggested in thread.
Push and hold GPS button and Internet button, push reset button with stylus shortly, release GPS and Internet button only when you see the white screen showing up.

Fuze w/ EnergyROM "Slide to Unlock" no longer working

This is the craziest issue.. My slide to unlock is no longer working so therefore I can hardly use the phone except that I can take inbound calls. I have tried to factory reset using down volume, circle, reset. Please please please any other ideas are greatly appreciated! I am totally stuck with a useless phone and am having to use a BJ II for now! Uggh!
How come the hard reset didn't work? You need to hold down vol down and the dpad button until the tri-color screen appears.
The easiest thing would be to connect to your pc, then access the registry with ceregeditor. Switch HKLM\Software\Microsoft\Shell\Lockscreen\enabled:1 to 0 and soft reset. Then just unlock off the old screen.
Beats the heck out of me.. I hold the volume button down, and hold down the dpad and nothing. I have done it on reboot, I have done it from the lock screen and nothing. As for your registry idea I like it, its just too bad I cannot get the phone to connect to windows. I have tried it on 2 Windows 7computers now. Anymore ideas?
You need to figure out how to hard reset-you're clearly doing it wrong. Hold down vol-down and the d-pad button simultaneously. Keep holding them down. Then just soft reset. Don't hold down the soft reset-just tap it with the stylus. Wait until the hard reset screen appears, then let go of the other two buttons. There is really no way that it won't work, it's a bootloader operation and it doesn't matter what crap you have on your main memory.
I'm having the same issue. Just flashed the Energy Rom and now I can't unlock my phone. I'll try some of the suggested tips and let you know which worked.
Farmer Ted said:
The easiest thing would be to connect to your pc, then access the registry with ceregeditor. Switch HKLM\Software\Microsoft\Shell\Lockscreen\enabled:1 to 0 and soft reset. Then just unlock off the old screen.
Click to expand...
Click to collapse
I edited the registry with the above value and it solved my problem - Phone is no longer locked on bootup. Now my issue is that somehow my touchscreen is unresponsive (probably why I couldn't unlock my phone). I believe it's a hardware issue not a software one because it looks like liquid got under the screen somehow. Lame. Now I need to flash back to stock ROM and lock it so I can send it in under insurance.

help needed major problem!

guys, after installing a cab to tweek my hd2 I've screwed the phone up! the
today page is all messed up and some of my soft keys don't work! what I need to do is either uninstall the cab or do a hard reset but I can't use the bottom right soft key in the settings tab to access all files?!
is there any way to reset the phone manuallyor get to uninstall progs via file explorer? basically I'm screwed and I need to hard reset but can't get to it!!!
thanks guys
http://www.mobilejaw.com/articles/2010/02/how-to-hard-reset-the-htc-hd2/
http://www.youtube.com/watch?v=Wq64BzDLTvU
I hope can i be help you....
To perform a HTC HD2 Leo hard reset with buttons
1. With the phone turned off, press and hold the VOLUME UP and VOLUME DOWN buttons, then press the END/POWER button shortly and release it. You will then see this message on the screen.
2. Release the VOLUME UP and VOLUME DOWN buttons.
3. Press the VOLUME UP button to perform the hard reset, or press any other button to cancel the reset.
Here's more info on this
http://www.hardreset.eu/htc_hd2_leo_hard_reset_soft_reset_en.html
Thanks very much chaps all back to defaults now
Remember if your phone wont respond but you can get an active sync connection to work, you can uninstall cabs from there.
bobbyball said:
Remember if your phone wont respond but you can get an active sync connection to work, you can uninstall cabs from there.
Click to expand...
Click to collapse
One to remember thanks mate, i've relatively new to all this but learning a lot off here and its good to know there's a back up if it all goes badly wrong!!

Categories

Resources