Related
I did the Hard-SPL and followed the instructions to a T. The phone rebooted after the hards-spl and everything worked fine. I installed BlackBerry Connect to my device and it rebooted. Now it just sits at the windows mobile screen and won't proceed any farther. Anybody have an idea why? Or what I can do to get it working again? I did the HardSPL using windows XP and not vista.
When I enter the bootload this is what I get.
KAIS*0 MFG
SPL-1.0.OliPof
CPLD-8
Serial
Please help.
Anybody have any ideas?
Go to the wiki and look up how to flash from a microSD card, then flash a clean copy of whatever rom you had put on there so you can get a fresh start. Unless something is physically broken with the phone, that will save it. Saved me plenty of times.
Just had to do a hard reset. Fixed the problem. Loaded new HTC ROM everything is up and running.
How did you do the hard reset? I can't even get it to work. (hold right & left soft keys and press/release reset until some screen I never get)
rbryant said:
How did you do the hard reset? I can't even get it to work. (hold right & left soft keys and press/release reset until some screen I never get)
Click to expand...
Click to collapse
hold the left and right soft keys while pressing the reset button simutaneously for 5 seconds.
alltheway said:
Just had to do a hard reset. Fixed the problem. Loaded new HTC ROM everything is up and running.
Click to expand...
Click to collapse
congrats, glad u fixed it.
what new htc rom
Thanks! That worked! Now to reinstall BB Connect on the device not the SD card. . .
rbryant said:
How did you do the hard reset? I can't even get it to work. (hold right & left soft keys and press/release reset until some screen I never get)
Click to expand...
Click to collapse
continue holding the left/right soft key after you put the stylus to reset, and the extra screen will show up.
can i hard reset by doing the clear storage thing?
gula187 said:
can i hard reset by doing the clear storage thing?
Click to expand...
Click to collapse
no, u have to do the left & right soft keys and reset all at the same time for 5 secs. thats the only way i know of to do a hard reset.
P1Tater said:
no, u have to do the left & right soft keys and reset all at the same time for 5 secs. thats the only way i know of to do a hard reset.
Click to expand...
Click to collapse
i held the cam.+ power button and held the reset button and its doin the same thing it does when i soft reset it
all 3 actions must be at the same time and hold for 5 secs. if you get the short vibrate, just keep trying over and over. it wont hurt anything. at least it never did to mine.
Yep, you cannot install the BB connect software to the SD card & then reset. Your device will be looking for the BB connect software before the device SD card has booted & come online.
HOWEVER,
with SK Tools you can go into the startup folder & reorder the start up files. If you move BB Connect down to the end of the start up sequence it might work. Well, it did for me. Ylu have to go in after installing though, & before the reset & change the start up sequence down so that it's the last item to auto start.
You will have this type of problem with any program you install to the SD card where the program has a higher priority auto start because as I said before, you have an item trying to boot before it's operating files are available. Therefore, you stop the whole boot sequence because it can't move on to the next start up item without finding the start item it's looking for.
AS for the Hard reset. I find the easiest way to do this is:
1. Soft Reset.
2. while the device is soft resetting depress both soft keys.
3. When you get to the first boot screen depress the soft reset key & hold while simultaneously holding the soft keys.
4. follow the instructions on the screen, i.e. push send (green phone button) to restore, etc...
Works every time for me.
P1Tater said:
all 3 actions must be at the same time and hold for 5 secs. if you get the short vibrate, just keep trying over and over. it wont hurt anything. at least it never did to mine.
Click to expand...
Click to collapse
This is not random!
When I press:
RightSoft + LeftSoft it always works.
LeftSoft + RightSoft it never works.
Sequence is important. Not sure if it is left or right first though.
If other can confirm, could someone put it in the wiki, please. I've pulled a lot of hair over this topic.
gula187 said:
i held the cam.+ power button and held the reset button and its doin the same thing it does when i soft reset it
Click to expand...
Click to collapse
that is to enter BootLoader NOT to start a Hard reset. when holding the power AND the camera button then resetting using the stlyus you should see the tri-color screen listing your SPL, Kaiser model, and one more thing i forget right now
EDIT - Make sure you are not pressing the ok button while going into BootLoader as the way the buttons are laied out its easy to press the ok by mistake.
ok..recently aquired this phone...
I've discovered that there is no sound from the speaker at all, no mp3 alarm ringtones .... I've used the slider on the side with no luck, and also tried changing the profile, volume control ect...no luck
Does anybody fancy talking me through any possible fixes for this...
Somebody suggested a hard reset?.... Any suggestions on doing this?...
Is this likely to be a software / registry change to fix this, or is it likely to be a case of sending it back for repair?... I'm sure its under warranty... but if its not, any suggestions on where I could take / send for repair?.... I'm in the Beckenham, bromley, south London region....
I have a basic understanding of pc's, but am not confident of doing registry changes without step - by - step instructions....
Anybody fancy a challenge?.... Thanx in advance...
PS.. just curious...any reason why this forum site is very simular layout to AV Forum site?....
Bump......
Try a Hard Reset first :
festermania said:
To perform a hard reset :
Press and hold the GPS/MESSAGING and INTERNET EXPLORER buttons, and at the same time, use the stylus to press the RESET button at the bottom of your device.
Release the RESET button, but continue pressing the GPS/MESSAGING and INTERNET EXPLORER buttons until you see this message on the screen:
"Release the buttons, and then press SEND on your device to perform the hard reset, or press any other button to cancel the reset."
To see bootloader page :
Hold power button + Camera button and push reset button with stylus wait 3 seconds and then release the reset button but keep pressing the power button + camera button u will be then in bootloader page
Click to expand...
Click to collapse
...did you go to Start Menu->Settings->Personal Tab->Sounds & Notifications to make sure that you've Enabled Sounds for Programs? a Hard-Reset certainly seems to be the option of choice here if nothing else is working. you can perform the Hard-Reset by selecting Start Menu->Settings->System Tab->Clear Storage and then follow the prompts to complete the process.
Nope...hard reset didnt work...just to say... I can hear through the earpeice when speaking in a phone conversation...just no other sound at all... even tried the option for beeps or clicks when using the keypad and still no sound... Also...that bootloader option...It just takes me to a screen with 4 different coloured stripes and some writing..I'll try it again and post what it says, but basicly it just freezes, then I have to do a soft reset to get the phone back on....
Bumpity bump....
m3uch4 said:
Press and hold the GPS/MESSAGING and INTERNET EXPLORER buttons
Click to expand...
Click to collapse
Please remember that the Orbit II does NOT have these buttons!
Update...
I've done another hard reset using this method....
1) Get your stylus and place it in the hole next to the USB port, BUT DONT PUSH! Just get it ready but dont actually push the button inside the hole.
2)Place your fingers on the Windows and OK buttons
3)Press and hold the buttons, dont let go.
4)Stright away push the stylus into the hole and press the button inside. You can let go of the stylus once the button inside has been pushed
5)Keep holding onto the Windows and OK buttons
6)After 5 seconds let go of the Windows and OK buttons
7)If asked to press SEND, just press the green pickup call button.
....
And still no sound!....
Any ideas?
Yes that's the correct procedure, strange about that sound though.
What ROMs it running?
Any clue about what it might be?....
hang on I'll find out........
ROM Version. 1.25.206.3 WWE
Is that the latest Rom..Would it be worth updating if there is a newer version?....
Is that an official ROM or cooked?
I think its official...
you could have a hardware problem...i would have sent it back for a replacement 3-4 days ago!
I cant, bought it second hand. Will take it back for refund if I cant get it fixed...just thought it might be a common problem with a easy fix!...
i believe you've tried most options without any success. the only other options are to open it up and see if maybe the speaker has been dislodged. not sure how easy that would be. good luck!
OK.... thanx anyway!... Damned tiny little screws inside...cant get to the speaker... Ok...off to the shop it goes!
No sound
I had this problem on another HTC device 'the Kaiser' and was informed some specific Roms are not compatible with the radio on the device ( does your device have the original Rom? ) Flashing a new may have caused this problem.
So what did I do....
I installed .net 3.5 compact on my phone, and then installed Advanced config and made a few TF3D tweaks. Everything seemed to work ok. I then installed hTorch and it worked.
I then installed dotfred's taskmanager and then did another TF3D tweak. (The cache size one) and then did a soft reboot.
Now my phone doesn't even work. I can barly boot up and when it does boot up I get all of these error about ***.exe can run because it is not a valid
application.
Im thinking it was the .net 3.5 maybe.. or the dotfreds... no idea really.
Phew... so What'd I do wrong? I cant figure out how to un-install the stuff I put on it, because active sync wont run because it wont load on my phone. I literally cant do anything on my phone. The time doesn't even show. All I can see is the battery, reception and that it is on vibrate. I cant even change the volume.
Thanks for any help... I would love a way to do it w/o losing all of my numbers but that maybe the only way. (but I dont even know how to do it like that)
cableguy84 said:
So what did I do....
I installed .net 3.5 compact on my phone, and then installed Advanced config and made a few TF3D tweaks. Everything seemed to work ok. I then installed hTorch and it worked.
I then installed dotfred's taskmanager and then did another TF3D tweak. (The cache size one) and then did a soft reboot.
Now my phone doesn't even work. I can barly boot up and when it does boot up I get all of these error about ***.exe can run because it is not a valid
application.
Im thinking it was the .net 3.5 maybe.. or the dotfreds... no idea really.
Phew... so What'd I do wrong? I cant figure out how to un-install the stuff I put on it, because active sync wont run because it wont load on my phone. I literally cant do anything on my phone. The time doesn't even show. All I can see is the battery, reception and that it is on vibrate. I cant even change the volume.
Thanks for any help... I would love a way to do it w/o losing all of my numbers but that maybe the only way. (but I dont even know how to do it like that)
Click to expand...
Click to collapse
The simplest would be a hard reset but will cause you to loose data, to do this press the the volume down button while pressing the reset button (next to the usb port) then it will ask if you want to hard reset so press the volume up. This will place your phone back to factory defaults.
Any idea how this happened? I would like to do all of this over again, just not sure what I did / didnt do...
I cant get this thing to hard reset.... ugh!
I have tried pressing and holding the volume down button and then pressing and holding the reset button next to the USB and it just keeps rebooting. (Also tried the center button and the volume button at the same time and then hitting and/or holding the reset button.)
Whats odd is sometimes is comes up with my password prompt and it works, other times that same password prompt comes up but my password doesnt work....
Wow... after about 15 reset, and 5-10 times trying to hard reset it... it just started to work all of a sudden..
I'm afraid to reset it again. No idea whats going on... worst part is that I work in IT so I'm really confused as to what is going on.
Hard reset is performed by doing the following.
1. Press the volume down button.
2. Press the action button.
3. Press reset button with stylus.
Press all of the above mentioned sections and continue pressing until you are prompted to perform a Hard Reset.
hchavarria said:
The simplest ... press the the volume down button while pressing the reset button (next to the usb port) then it will ask if you want to hard reset so press the volume up. This will place your phone back to factory defaults.
Click to expand...
Click to collapse
This is the method for entering bootloader mode, not Hard Resetting the device.
If you have your phone synced to outlook, you should be able to restore your contacts. Also I save all my contacs to sim via sim manager.
a bit of advice which I use... always backup ur phone after installing a program. After each single install do the backup, you should have Sprite Backup which came with ur phone. This way, you can go back to any one point in time to see what F'ed up, takes a bit longer but its worth it.
This doesnt solve ur current problem but at least u can make sure it doesnt happen again... and fyi, everyone ends up hard resetting their phone at some point in their life and lose all data... ur not the first and wont be the last so breath and take it easy.
Hi all,
Perhpas this has been answered before, but I couldn´t find any related thread.
My Rapahel is turned on but can´t see anything on the screen! is totally black.
I know it´s turned on because I can up or down the volume key and I hear the sound and feel the vibrate.
Yesterday was ok, nothing new installed but today I just pressed the power button and nothing!!
This happened me before on Universal, problem was that in some way the phone change itself the brightness to cero.
If I conect to wall charger nothing happens also, not any sign that device is charging.
But still can see something. Now on my Rapahel I cant see anything?
Any help would be much than apreciated please!!
Thanks,
I would
1 softreset
2 hardreset
3 rma
Rudegar said:
I would
1 softreset
2 hardreset
3 rma
Click to expand...
Click to collapse
thnaks,
soft reset done: nothing
hard reset done: nothing
sorry, what is rma?
Any other advice?
help please!
Hey masters!
A light would be great here!
Sorry to insist!
orb3000 said:
thnaks,
soft reset done: nothing
hard reset done: nothing
sorry, what is rma?
Any other advice?
help please!
Click to expand...
Click to collapse
Not a master, but still try to help:
What happend during the soft or hardreset, is the screen showing during the booting ?
How did u do the hardreset, by holding keys ?
After the hardreset u have to get the screen aligned how did u get after that point ?
Help!
Ok this is what I did:
When sof reset not any screen was appearing during the process.
Yes tryed the hard reset presing volume down the center button and the hole behind the charging usb and nothing happened
Snince then I can just hear the sound but nothing on the screen at all
Thanks for any advice!
orb3000 said:
Ok this is what I did:
When sof reset not any screen was appearing during the process.
Yes tryed the hard reset presing volume down the center button and the hole behind the charging usb and nothing happened
Snince then I can just hear the sound but nothing on the screen at all
Thanks for any advice!
Click to expand...
Click to collapse
Hard Reset the device:
This will wipe all the storage (not the sd card) and your device will be reset to default settings.
Hard reset (option 1)
1. Pull out the stylus.
2. With the device turned on, press and hold the VOLUME DOWN and CENTER buttons, then press the RESET button with the stylus tip.
3. Continue pressing the RESET, VOLUME DOWN and CENTER buttons until you see this message on the screen:
This operation will delete all your personal data, and reset all settings to manufacturer default. Press ?VolUp to restore manufacturer default, or press other keys to cancel.
Hard reset (option 2)
You can also use Clear Storage to reset your device back to factory default settings.
1. On the ?TouchFlo3D Home screen, slide to the Settings tab and then tap All Settings or goto Start and press Settings.
2. On the System tab, tap Clear Storage.
3. Enter “1234” and then tap Yes.
Hard reset (option 3)
1. Pull out the stylus.
2. Turn device OFF.
3. While pressing the CENTER button, turn the phone on with the POWER button.
4. Continue pressing the CENTER button until you see this message on the screen:
This operation will delete all your personal data, and reset all settings to manufacturer default. Press ?VolUp to restore manufacturer default, or press other keys to cancel.
This works on at least some Verizon CDMA phones on which option 1 will not work.
Hard reset (option 4)
1. Pull out the stylus.
2. With the device turned off, press and hold the VOLUME DOWN and CENTER buttons, then press and hold the POWER button.
3. Continue pressing the POWER, VOLUME DOWN, and CENTER buttons until you see this message on the screen:
This operation will delete all your personal data, and reset all settings to manufacturer default. Press ?VolUp to restore manufacturer default, or press other keys to cancel. (works with Alltel touch pro)
Click to expand...
Click to collapse
Ok this is out of the wiki, u see that all methods let u press the vol up button to really start the hard reset than. So on either method do the key presses, wait a while and then press the vol up to start the process.
Its a little try and error because u are not seeing the the actual message to press the vol up. but mybe thats worth to try until u get the point. I think option 3 is a good and easy one.
hopefully the hardreset works, maybe u can try to take a torch or bright sun light to get the display information, if the display itself is not broke u should see a slight shadow of what is written on the display. I had that problem with my wifes phone once and the information was the but its not a reflective display so it was very faint to see.
Finally tho, if all that fails:
RMA = Return merchandise authorization
It means a warrenty return.
It sounds to me like the lcd has croaked. If you dont have suitable warrenty / insurance i'd suggest ebay! i've just found a screen & digitiser for less than £25 (thats for a Raph 100, i honestly dont know if parts are the same on different raph models but i suspect they are)
Good luck!
Thanks a lot guys but nothing worked
I cant do any hard reset option but sound stills hearing perfect
I can understand why one day was perfect and next no screen!!
Can anyone confirm that the LCD Display+Touch Screen For HTC Touch Pro T7272 form the last link will work on my At&t version?
Any other advice?
Thanks in advance
orb3000 said:
Thanks a lot guys but nothing worked
I cant do any hard reset option but sound stills hearing perfect
I can understand why one day was perfect and next no screen!!
Can anyone confirm that the LCD Display+Touch Screen For HTC Touch Pro T7272 form the last link will work on my At&t version?
Any other advice?
Thanks in advance
Click to expand...
Click to collapse
Sorry to hear that nothing worked.
Not shure but if the phone fails to hard reset it is not only the screen that is broken ! Take this into account, do u still have warranty, maybe it is better so exchange the whole phone.
Well that is the problem
I live in other country so warranty is not valid here, and there is not a single place where I can take it to repair here
Very strange as one day was perfect ant the next day no screen!!
I took the battery out and then place it again, all works normal, it starts (vibrations feels) then nothing!, I know its turned on because I can move volume up or down and I hear the sound and vibration, if open the keyboard not any light turns on on it.
I´ll wait patient till some member can recomend more options in order to make it work again.
I´m so frustrated...
Thanks anyway for your kind help!
orb3000 said:
Well that is the problem
I live in other country so warranty is not valid here, and there is not a single place where I can take it to repair here
Very strange as one day was perfect ant the next day no screen!!
I took the battery out and then place it again, all works normal, it starts (vibrations feels) then nothing!, I know its turned on because I can move volume up or down and I hear the sound and vibration, if open the keyboard not any light turns on on it.
I´ll wait patient till some member can recomend more options in order to make it work again.
I´m so frustrated...
Thanks anyway for your kind help!
Click to expand...
Click to collapse
Dont give up, hope that I not get on ur nerves. But still I think a hard reset must be possible.
When u turn ur device of how do you do that ? When u turn it OFF with the power button you have to answer a question on the screen, u do not see the question but is the touchscreen working or how do you know where the YES/NO field is ??
So another way is take the batt out, and when u insert the batt than turn it on with one of the mentioned hardreset procedures.
There is than a question also but this is answered with the Volume UP button.
Maybe u need a second person for helping with the buttons,
The hardreset must be possible somehow, it cant be a broken touchpro
OK I tried with my phone and procedure 1.
VOL DOWN and CENTER with Phone ON
Then Push RESET with the Stylus and hold all three until:
After 5 seconds the Bootscreen showed, after that the message to press VOL UP for Restore.
You do not see the boot screen but just wait the time
You are so kind my friend!
I have tested all the hard reset options but none seems to work
Aparently I can´t do a hard reset
as every time I follow any process and wait 5 sec, then press vol up and it seems that nothing has happened, not even a soft reset!
Pressed center button and vol down, then press the rest button located behind the usb port (the one with a symbol for headphones....)
But nothing happens.
I´lll upload a small video with me doing the process, hope it helps in anyway
Here the link of the video I took with my problem
https://www.yousendit.com/download/ZW9DQ3QxeWFEbUx2Wmc9PQ
Hope this helps in any clue to solve my mysterious problem
Thanks a lot!!
Ok will wait for the video.
Inbetween another option, did u try to flash the ROM.
Can u get a rom to download from ur provider, to do so ?
After the flash the device more or less does a hardreset.
Update:
saw the video, it seems that the phone is not reacting to the center or the reset button. Because when u push reset, even if it is not in hardreset mode, it should do a soft reset right away.
But ur phone is straight reacting to the Vol keys, very strange.
Is the mentioned ROM update an option ??
What is the reaction when u hock the phone to the pc, is active sync working ?
Do you see the internal memory of the phone ?
Remove the SIM and any memory card, maybe they are causing trouble ?
Exactly, Raphael is not reacting to a hard reset and dont know why?
I´ll keep trying all methods.
Yes, I´ll try to reflash to the original AT&T ROM for Fuze tomorrow as today I am not close to a computer.
If you have any link for that mentioned ROM would be great, if not no problem I´ll find it.
Once again thanks a lot and I´ll keep looking this thread in case someone else have another recommendation
Cheers,
orb3000 said:
Exactly, Raphael is not reacting to a hard reset and dont know why?
I´ll keep trying all methods.
Yes, I´ll try to reflash to the original AT&T ROM for Fuze tomorrow as today I am not close to a computer.
If you have any link for that mentioned ROM would be great, if not no problem I´ll find it.
Once again thanks a lot and I´ll keep looking this thread in case someone else have another recommendation
Cheers,
Click to expand...
Click to collapse
Here ya go:
http://wiki.xda-developers.com/index.php?pagename=HTC_Raphael_WM6.1_ROMs
Take the one matching ur cell phone. Check the thread links for more Info.
Thanks, downloading
Tomorrow I´ll try to reflash and post results later
Cheers,
(Anyone? another idea?)
UPDTATE: I conected raphael to my computer and using pocket controller I can see that all is working ok inside but nothing on the screen, or keyboard lights.
I´ll try to hard reset now...
Hope this can help in order to solve my problem
Thanks
Attached the picture
UPDATE 2: I performed the wipe data from the device, this must be exactly as a hard reset I pressume, and nothing....
So now is there anything I can check to see if there is something loose in the connection from device to screen?
Any recommendations on how to do this?
signal from device working perfect simply does not come to screen or even to turn on light on keyboard
Any help is GREATLY apreciated!!!
What rom did you have? I had a similar problem and just had to rma it.
Hi,
I dont know what happened but since this afternoon (no matter how many times I perform a soft reset) sense is unable to start. I cant even navigate my phone. however I can still send and recieve calls but that's it.
Does anybody know what caused this? Although I install various software on an regular basis I'f never flashed the standard ROM.
Can you please tell me how to perform a hard-reset if software doesn't allow me to?
quote from the manual:
"To perform a hard reset
1. With the phone turned off, press and hold the VOLUME UP and VOLUME DOWN buttons, then press the END/POWER button shortly and release it. You will then see this message on the screen.
This operation will delete all your personal data, and reset all settings to manufacturer default. Press VolUp to restore manufacturer default, or press other keys to cancel.
2. Release the VOLUME UP and VOLUME DOWN buttons.
3. Press the VOLUME UP button to perform the hard reset, or press any other button to cancel the reset"
However before you do that, you could try disabling sense + soft reset + enabling sense -> this helped me few times when my sense wouldn't start.
The question is can you get to Start Menu / Settings? or - if not - does your ActiveSync work?
Some info from the Htc website..
Performing a Factory/Hard Reset You can return your phone to its original state, as it was when it left the factory. This is also called a hard reset. You might want to do this if you are giving your phone to a friend or relative and you want to remove all your data first, or if your phone has a persistent problem that is not solved by powering off the phone and then powering it on again.
A factory reset is a drastic measure. It permanently erases all your personal data and customized settings, and also removes any programs you have installed. Make sure that you have backed up the information and files you want to keep. For information about ways of backing up your phone, see the following topics:
Synchronizing With Outlook on Your Computer
Backing Up Your Phone Using Microsoft My Phone
Performing a factory reset via settings
The most convenient way to do a factory reset is via the phone settings.
On the Home screen's Settings tab, tap Menu > All Settings > System > Clear Storage.
Enter 1234.
Tap YES to perform the reset, or tap NO to cancel the reset.
Performing a factory reset using phone buttons
If you cannot turn on your phone or access the phone settings, you can still perform a factory reset by using buttons on the phone.
With your phone powered off, press and hold the VOLUME UP and VOLUME DOWN buttons.
While holding the volume buttons, press the END/POWER button briefly and then release it.
When you see a warning message on screen, release the VOLUME UP and VOLUME DOWN buttons.
Press the VOLUME UP button to perform the reset, or press any other button to cancel the reset.
p107r0 said:
quote from the manual:...
...The question is can you get to Start Menu / Settings? or - if not - does your ActiveSync work?
Click to expand...
Click to collapse
...The answer is: No...I'll try your manual quote tnx...
Yes Activesync still works...
Shum97 said:
Performing a Factory/Hard Reset... ...
Click to expand...
Click to collapse
Tnx guys but no luck, when phone is off and I hold the volume buttons then briefly tap power button the damn thing turns on...the the whole crap starts all over again...nothing works except sending and recieving calls...
ok, before you attempt to loose all your data, try copying unpacking the attached file to your Windows folder - it can be done with ActiveSync,
if I did not screw up, once the file is copied there, long-press of phone button should bring the today settings, where you can try to disable sense, and see what happens then...
dub027 said:
Hi,
I dont know what happened but since this afternoon (no matter how many times I perform a soft reset) sense is unable to start. I cant even navigate my phone. however I can still send and recieve calls but that's it.
Does anybody know what caused this? Although I install various software on an regular basis I'f never flashed the standard ROM.
Can you please tell me how to perform a hard-reset if software doesn't allow me to?
Click to expand...
Click to collapse
WTF... Same here... Turning the phone on this afternoon, suddenly Sense does not want to start anymore... No mather how many times I try!!!
Update: at least the "Hard Reset" worked. So back to basic and Sense worked again. :-( Now updating the phone again... Sigh...
Righard said:
Update: at least the "Hard Reset" worked. So back to basic and Sense worked again. :-( Now updating the phone again... Sigh...
Click to expand...
Click to collapse
one more (sad) reason for investing in good backup app, be it SPB, Sprite, Resco or whatever...
p107r0 said:
one more (sad) reason for investing in good backup app, be it SPB, Sprite, Resco or whatever...
Click to expand...
Click to collapse
Agree 100%. I backup regularly but now I cant even hard-reset so that's not my problem.
Until now a hard reset always worked. Putting your (p107r0) file in the windows folder at least gave me the uportunity to disable sense and grand me access to the settings. But the touch screen seems to suffer from this virus too...when I try to purge my stored info (entering 1234) the keyboard shows what key I press but the number doesnt appear in the textbar...
Even trying to install a cab doesnt work. I can find everything on the phone but tapping does nothing...
I'm very close to flushing the phone down the toilet or something...
I feel your pain (1 month with overheating mainboard), but don't flush it yet
try the second method for HR - the one where you start with both vol keys pressed
p107r0 said:
I feel your pain (1 month with overheating mainboard), but don't flush it yet
try the second method for HR - the one where you start with both vol keys pressed
Click to expand...
Click to collapse
TNX!!! tried and at last problem 'solved' (hard reset worked) let's hope it's a last for me...
mods you can close this thread as far as I'm concerned.