Hello ppl,
just flashed my device with hard spl which was o.k. but i need a question answered. Looking at the WIKI pages i couldn't find the same protocol version as iv got on my touch pro. mine is as follows
ROM version 1.90.405.1 WWE
Rom Date 08/01/08
Radio 1.02.25.19
Protocol 52.33.25.17W
the ones on WIKI ends in a "U" not a "W" is there a difference, if so what is it. will it affect if i had to send phone back to HTC under warrenty if restored to the "u" protocol.
The phone is HTC unbranded handset (factory unlocked)
Cheers Goodstone
goodstone said:
Hello ppl,
just flashed my device with hard spl which was o.k. but i need a question answered. Looking at the WIKI pages i couldn't find the same protocol version as iv got on my touch pro. mine is as follows
ROM version 1.90.405.1 WWE
Rom Date 08/01/08
Radio 1.02.25.19
Protocol 52.33.25.17W
the ones on WIKI ends in a "U" not a "W" is there a difference, if so what is it. will it affect if i had to send phone back to HTC under warrenty if restored to the "u" protocol.
The phone is HTC unbranded handset (factory unlocked)
Cheers Goodstone
Click to expand...
Click to collapse
The letter at the end depends on which band you are currently using. The number is the important part.
mrvanx said:
The letter at the end depends on which band you are currently using. The number is the important part.
Click to expand...
Click to collapse
many thanks for info
Related
How can I tell if my phone is cid-locked, I would really like to change the ROM without the risk of bricking it. Has anyone one tried lokiwiz to cidunlock their phone? any advice would be appreciated. BTW I bought the phone from gray market in Hong Kong and is Vodafone branded, do you think it would be locked?
It came preloaded with Dopod Rom, but I don't like it that much. Also what is the best radio rom, the dopod radio rom is a bit weak.
IPL 2.15.0001
SPL 2.15.0001
Rom vs: 2.15.13.27 WWE
Radio: 02.19.21
Protocol version: 4.1.13.09
Ext ROM: 2.15.13.21
Thanks
locked
you are on G4, so yes you are still CID locked.
Normally when you flash your rom you will know imediately when it try to update.
kenxu said:
you are on G4, so yes you are still CID locked.
Normally when you flash your rom you will know imediately when it try to update.
Click to expand...
Click to collapse
so should I try to flash a rom and see what happens? if it goes through without an error it is cid unlocked? if an error pops up it is locked? Should I try this or should I avoid the risks? Any ROM suggestions? Qtek maybe?
Since your phone is G4 chip, i'm pretty sure you are CID locked. Dont worry about the CID locking for now, GOOD ROMS outthere been using different programs to get around CID locking problem. I suggest you can start with PDAMobiz rom from the other thread. REMEMBER USE G4 program not G3 or other programs. or look for any rom that has NoVender CID in the name.
MDA VARIO II with Dopod WM6
I recently bought Tmobile MDA Vario ii with Dopod Wm6. When it boots it shows dopod sign so I think it is dopod. The ROM is 3.54.707.3.
I want to upgrade to Wm6.1 but Tmobile has only official 3.60.xx rom presently available for download. Can I directly flash any Hermis compatible ROM on MDA Vario II.?
Since it has Dopod WM6 the CID lock must have been diabled I suppose. Am I right? and should I directly flash any HERMIS official or extended ROM? what are your suggestions Thanks
Hemant
I don't know enough about the Hermes and flashing to be certain, but I think you'll need to HardSPL (which bypasses bootloader CID checks) before flashing a ROM.
Take a look at the Hermes sub fora before doing anything though...
i'm trying to upgrade a second hand bought qtek s100 (presumably a magician). i hoped it would be a piece of cake, being a qtek device (thus sim and cid lock free). the simlock part is correct, any sim will work. but the cid lock free part does not hold. i tried several rom upgrades from the shipped rom section on the xda server:
nl113 rom (i think this is the tmobile rom)
the uk wwe 112 rom
the wwe 112 rom
the wwe 113 rom
and so on.
i also tried the xda unlock tool, hoping that i made a mistake and that something was still locked. after running it, it told me that unlocking worked (but it was already simunlocked to begin with). but still afterwards, running any of the above roms still didn't work. still country error.
with all the roms i get an country 112 error. even with the original qtek roms? i tried both the uk and wwe rom (not quite sure if this is a native dutch s100 or an expansys (uk) s100). did not matter, both didn't work. never had so much problems with my mda vario.
current rom is radio version 1.05.00
protocol version 1337.39
rom version 1.06.00wwe
extromversion 1.06.154wwe
maybe someone can shed some light why my qtek s100 does not take any of the shipped qtek wwe roms?
many thanks for reading my thread (and hoping for your suggestions)
solved it. just needed to run the MaUpgradeUt_noID.exe. then it stated the current rom and so on, after which it gave an country error while putting it into bootloader menu. then i ran MaUpgradeUt_noID.exe again while the qtek was still in bootloader menu, now the summary sheet stated blank at the rom version and so on. now it was able to upgrade correctly. for those like me who have the same problem, just run MaUpgradeUt_noID.exe twice and immediately after the first attempt!
Hi all,
I have also a HTC Wizard and i want also the WM6 titanium on this device.
But what i do, it doesnt work. The flashing is going well (i haved flashed it to the WM6Titanium rom).
When i reset the wizard it stil stays in the WM5 with the following details:
ROM version 2.26.10.2 WWE
ROM date: 6/7/06
Radio version: 02.25.11
Protocol: 4.1.13.12
ExtROM: 2.26.10.105
Model NO: WIZA200
AKU: 2.3
IPL: 2.17
SPL: 2.17
GSM 02.25.11
I did the "Howto flash a Wizard... a little tutorial" from member Vippie before i do any WM6 flashing. What i try, it will not flash to any WM6
Who knows what the problem is?
Then you're phone is probably CID locked. I recommend you reading the thread about how to get rid of the CID lock.
Succes
Your right.. I had upgrade my wizard before with a other ROM. I think there was an lock in it.. Thanks..
PLEASE make sure you go through the Wiki and read all of the Stickys before you ask questions like this. Almost no phone comes CID unlocked (the ones on eBay that are used sometimes are) but everything else is blocked.. so you need to CID unlock it and make sure that you read everything about it so you don't brick your phone. good luck
Nstefanelli
What is the process for restoring the factory T-Mobile ROM?
I have an T-Mobile SDA which shipped with:
ROM Version 1.0.14.0
Operator Version 1.9.19.16
Radio Version 4.0.13.20_01.09.00
IPL ?
SPL?
First I upgraded to:
ROM Version 2.0.9.0 (Qtek 8300)
Operator Version 2.5.322.1
Radio Version 4.1.13.28_02.61.01
IPL ?
SPL?
Finally, I upgraded to:
ROM Version Windows Mobile 6 for Tornado Perfect English Edition
Operator Version 10.0.0.15341
Radio Version 4.1.13.28_02.61.01
IPL 2.00
SPL 2.00.0008
I have no idea what the SPL/IPL versions were in the original ROM.
I need to return the phone for a swap under warranty (unrelated to flashing)
I have seen conflicting posts about whether or not there was a problem reverting to an older bootloader, etc. Most of the posts seem to be referring to the UK SDA (Typhoon), not the US SDA (Tornado). But they are similar enough that the concerns might be valid.
So the question is... How do I get back the SDA back to "factory fresh?" I have the original T-Mobile ROM. I downloaded it from HTC months ago. Is it as simple as running the original EXE, or will I need to jump through hoops?
Thanks for any help you can give.
dc
Use TyphoonNBFTool and open the nbf file in your original ROM, you will see the versions
The Dopod 577w AKU2 ROM for my Tornado comes with IPL and SPL, so if your ROM comes with it, then it will be patched. Just run the ROMUpgradeUtility.
Here is what TyphoonNbfTool gives me.
So, since it shows IPL and SPL are in the ROM, I don't need to worry about being able to downgrade?
Also. by going from WM6 to WM5, do I need to launch teraterm and "FORMAT BINFS" again?
Hi Community,
my mda vario III (HTC Kaiser) is an waranty case and i badly need the original rom incl all, this one in the forum is only the OS without radio spl and so on.
best regards
HT
I also needed it, bust just installed the OS and a working Radio.
T-Mobile does not even care what is installed, i guess they don't even startup the device but send it straight back to HTC. I switched about 20 T-Mobile HTC Devices and it worked everytime to just install the OS and a working Radio.
If you know the Radio and OEM SPL version you can probably get them from this site somewhere. They dont have to be extracted from the Dumped Shipped ROM.
Ta
Dave
DaveShaw said:
If you know the Radio and OEM SPL version you can probably get them from this site somewhere. They dont have to be extracted from the Dumped Shipped ROM.
Ta
Dave
Click to expand...
Click to collapse
thats teh problem i dont know them :-(
Ah, Just have to see if anyone knows the OEM SPL and Radio versions.
Does it have to be WM6 or Wm6.1 Versoin, or are you not bothered. I don't think anyone will care so long as it is a T Mob stock version.
Ta
Dave
WM 6.1 T-Mobile German
You can download the latest German ROM from the T-Mobile website
http://www.t-mobile.de/fremdcontent/1,2790,123254,00.html