Database Info

HTC Touch Pro - Active Sync with Vista via Bluetooth

I love the phone but I cannot believe that its so hard to sync with Vista via Bluetooth. It has the latest mobile software and vista is the new OS, how can they **** things up so badly?
I know there are some issues with the Sony Vaio Bluetooth stack. Its super confusing and the Bluetooth settings are hard to find.
Is it actually possible to Sync with Bluetooth to vista from WM6? Has anyone got this working?
Thanks, even a yes or no would be great here, so that I know if I'm wasting my time.
Ben

I did. After connecting my TP to the PC via bloetooth, i synced them, but using the phone's ActivSync, and not the Windows Mobile Device Center.

You need to go to your phone and instruct a "bluetooth activesynce".
It worked fine for me and my Vista SP1, using a dead-cheapo USB-bluetooth adapter.

Got it working too. Paired the 2 devices and entered passcode. Then started AS on the phone and selected Connect using BT and off it went. No problems what so ever.

Its good to hear that it works for people.
I think its an issue with the Sony Bluetooth stack. I can pair the devices but the device doesn't show that the laptop has activesync, just wireless stereo. I think I might hate Sony more than Microsoft, Mac next time for sure, so so sick of Vista and spending a week online working things out.
Its a long shot, but I don't suppose anyone has it working on a Sony Laptop with Vista?
Thanks for the replies and listening to me moan.

Indeed, having the same problem with Toshiba Bluetooth Stack. No Activesync profile when searching for available profiles. Is the any solution on how to add the "Activesync profile"?

my phone found the desktop with bluetooth and i checked activesync and on the phone i hit connect bluetooth it works fine but i hit sync and nothing happens?

remmyhi said:
Indeed, having the same problem with Toshiba Bluetooth Stack. No Activesync profile when searching for available profiles. Is the any solution on how to add the "Activesync profile"?
Click to expand...
Click to collapse
Did you try this https://forums.microsoft.com/WindowsMobile/ShowPost.aspx?PostID=2382825&SiteID=65
I had the same problem with my VAIO TZ and my Tytn II, didn't try with the TP yet.
Apart from replacing the drivers, I seem to remember there was a trick related to changing the COM Port or something (the default port was incompatible with Activesync) but I'm afraid I don't remember. I'll give it a go when I have time to connect both, but it may not happen until I getmy new laptop.
EDIT: forget the above, that's the trick I half remembered (and used): http://forum.xda-developers.com/showthread.php?t=397419

i have the same problem with Toshiba laptop..i have tried everything

remmyhi said:
Indeed, having the same problem with Toshiba Bluetooth Stack. No Activesync profile when searching for available profiles. Is the any solution on how to add the "Activesync profile"?
Click to expand...
Click to collapse
If this is the case, try adding comm port for both your laptop and tp. Outgoing for TP and incoming for laptop. Then you need to set Windows Mobile Center to connect via COM?? (?? is the number you've chosen)
ActiveSync connection (via bluetooth) is actually a comm port connection.

lbhocky19 said:
my phone found the desktop with bluetooth and i checked activesync and on the phone i hit connect bluetooth it works fine but i hit sync and nothing happens?
Click to expand...
Click to collapse
Try removing the pairing and rebond.

It also works fine for me with Vista (non-SP1), newest version of Mobile Center, and a Bluetooth dongle with Microsoft stack.

This worked for me
I used many websites, a lot with very similar advice, but none specific to the HTC touch Diamond conundrum.
However, this is a very useful step by step guide:
http://www.inspectmygadget.com/2007/05/31/how-to-connect-your-wm5-device-to-wmdc-via-bluetooth/, which although provides advice for WM 5, is still the same principle.
The advice below is device specific
I use:
HTC Touch Diamond (with WM 6.1)
WMDC 6.1
Bluesoleil V6 Bluetooth Dongle
Although I had found the above advice on previous websites, and it had not worked I remained persistent.
I was able to find 'Activesync' as a service when, on my PC, changed the WMDC connection settings to COM 3.
However every time I tried to 'connect via BT' on my device, it said 'no partnership existed......'.
I therefore established some more com ports on my computer (in addition to COM 3, COM 4, COM 5 which I had taken authorisation off of):
COM 6
COM 7. Both without authorisation.
I then used the trial and error method to find which com port would broadcast 'activesync' to my device. It was still COM 3.
However, on trying 'activesync via BT'on my device this time, it began to connect!!!
I am not sure whether opening up the extra ports (COM 6 and COM 7) or whether my computer/device decided it was now the time to play ball since it realised I was about to take a cricket bat to it worked but it now syncs fantastically.
NB: There was no need to reinstall any software or windows operating system (as some other posts on other websites have suggested)

I still cannot get this to work. I couldn't on my Sprint Touch and now I can't on my Touch Pro.
I have Vista Home Premium SP1 with WMDC 6.1
Computer was formatted to factory settings today. Touch Pro is new as of yesterday.
I paired the phone to the computer and the computer to the phone. ActiveSync was a profile available for the computer and I made sure it was ticked.
I plugged in the phone via USB and set up the partnership. All is good there.
When I open ActiveSync on the phone and click "connect via bluetooth" it tells me it cannot open the port.
This is the exact same problem I had with my Touch. The computer is newly formatted and isn't communicating with any other bluetooth device at all. How can the port not be available? I've tried the regedit. Tried making incoming ports on the computer. No avail. However, I cannot make new outgoing ports on the phone. The tab is there but no option to do so.
Any help?
Thanks in advance

EZ Solution
I just found an easy solution for u guys who using Toshiba Bluetooth Stack ...
U guys no need to remove anything ...
All u need to do is verify the COM port of ur bluetooth ...
1. Go to the “Bluetooth Local COM” Applet in your Control Panel
2.Open “Bluetooth Local COM” applet where you will see a list of Ports
3. The Corerct port you need to use is
“COM7 Toshiba BT Port (COM7) LocalCOM-Server[SerialPort(TOSHIBA LocalCOM)]
and not “COM6 Toshiba BT Port (COM6) LocalCOM-Client”
From this guy here ... << http://thinkabdul.com/2006/10/12/tu...c-via-bluetooth-with-toshiba-bluetooth-stack/ >> TQ sir ...
Then ... u guys need to use ur REGEDIT to find this ...
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows CE Services
Notice there is SerialPort ?? yes ... JUST CHANGE THE string 'Bluetooth' to COM7 ...
After this just pair ur wat ever PDA u've got & thats it ... u got the ACTIVESYNC in the advance option of the services available ...
Hope u guys enjoy !!!
P/S :- BTW i just bought my HTC TP 2 weeks ago ...

woks perfectly!!!
many thanks.

Activesync won't recognize Raphael,...

hello everyone,
I cannot get Activesync to recognize my htc touch pro no matter what i do,... i've uninstalled and reinstalled shut everything off then on, followed all of MS's advice, and nothing works,...
Any suggestions,...? No problems connecting my tytn II and my hermes,...
thanks,
ek

Are you running any firewall software? If so, this is relevant to you.

start>>settings>>connections>>usbtopc>> un check the "enable advanced network functionality"

sorry attnoob, was trying for your quick fix, but it didn't work,... thanks anyway,... now will go to the firewall issues noted above, but i already opened the ports as per ms's recommendations in help,...
will try other suggestions and get back to you,...

ok, so allenh, read all the info at the link you sent me, and actually did all these things yesterday, but it didn't work,... also, something strange happens when i hook the device to the PC in that, the device immediately goes to the 'internet sharing' program you use when tethering, it establishes a connection with the internet, and there is a comments saying 'check usb cable connection' and this never happened with the tytn II,...
your help is appreciated,...
ek

Check the USB cable
It seems the USB cable the Tilt uses and the one the Raphael/Fuze use are different, If i use the cable that i usued with my tilt the computer would not recognize the Fuze it will charge it though, only if i use the usb cable that came with the Fuze it works fine.

Are you using the stock ROM or a cooked ROM. Some of the new cooked ROMS are having this problem.

Also, are you using Vista or XP. The problems seem to be with XP.

my fuze seems to also be having this issue... i can hear my laptop do the little noise saying something is attached but my phone never pops up with the screen anymore asking what i would like to do. sometimes i get lucky and it will randomly connect to active sync but would not give me any warning whether it was going to work or not.

btw, it didnt start doing this until i flashed NATF's v2.1 and also loaded a custom theme and toolbars and such.... it worked after i loaded NATF's rom, just randomly stopped at some point after that.

if you are putting on a new rom then put the phone in bootloader mode it worked for me

LostcauseZ06 said:
my fuze seems to also be having this issue... i can hear my laptop do the little noise saying something is attached but my phone never pops up with the screen anymore asking what i would like to do. sometimes i get lucky and it will randomly connect to active sync but would not give me any warning whether it was going to work or not.
Click to expand...
Click to collapse
My Fuze is doing this too, excep every single time. I can't get Activesync to work through USB. And I'm running the stock ROM. Internet Sharing automatically connects.

Okay, I set Internet Sharing to Bluetooth PAN (instead of USB), which kept it from automatically starting when I plugged in the USB. This let ActiveSync and the 'choose a connection type' startup on my Fuze and everything has been fine.

Try your PC Network settings
Hi,
I have the same problem recently. My AS does not want to recognize my Raphael. What I did was go to the network setting of the PC (Network Connections) and disable the 1394 adapter. Then my AS now can recognize my Raphael. The next unsolved thing is how to make the connection stable enough to make happen the syncing.
Drax

Hi, I had similar problem. Once upon a time the connection between my Touch Pro (WM6.5.3) and PC stopped working. Activesync did nothing and after a minute gave error message with troubleshoot guide. So I opened control panel ---> device manager (with mobile connected via USB), where I found "Windows mobile based device" between network adapters. I opened it and under it's advanced settings I found "network address" which was set to "unavailable". So I changed it to 192.168.2.2 and now it works again ;-)
Hope it helps someone ;-)

Does HTC Cruise work like a modem?

I've a software to control a locator GPS-GSM device and I need my HTC works like a modem. When I put my HTC into the USB must be recognized like a COM (start-control pannel- system-hardware-device administrator) to make a data call via this software. It musn't initiate the Active Sync software.
This software only works when a modem is connected. Before I connected my V3 Motorola Phone.
Any solutions?
Thanks

You can disable the ActiveSync on your PDA, just activate it, Menu -> connections, untick...
But for what reason would you wan't to use it as a modem? use it as a wired GPS device or connect to the Internet using it?
If the First, I'd recommend the Franson GPSGate, for the second use the ICS (internet sharing) App on your PDA...

I want my HTC Cruise was recognized like a modem when I connect it with the PC via USB.
Why?
Because I must download tracks from a GPS-GSM locator device installed into my car to recover my car if it were stolen, via software installed in the PC.
Before I connected my V3 Motorola Phone via USB to the PC, then it was recognized like a modem USB in COM4 for example. Then I set the communications setting from the software and I maked a data call from the software PC via V3 phone to the SIM installed into the car.
Now I need to connect my HTC instead of V3 and I expect it was recognized like a modem in certain COM.
Do you understand me?
Thanks

Yes this can be done.
1. Connect TC to PC like you would to sync. (you do need to make the active sync setting for allow wireless connection is checked)
2. go to progarms on the Pocket PC. There you find an app called Interent sharing.
3. Hit conect once you open the progarm.
4. Do what you need on the net.

I don't need sync the HTC with the PC and I don´t need to connect to the net.
Let's imagine that we want to use the hyperterminal program in the PC, you must select a modem that it's installed in a certain COM with a desired speed, protocol, etc
Do you understand now?
Thank you.

I guess I'm seeing where this is headed...
Basicly you wan't the PDA to show up as a Dial-Up modem... I've done a bit of searching and with WM6, the dial-up modem function has been effectively replaced by the ICS, the main reason is, it was a b*tch to configure for internet access, and that is use of it in 99% of cases...
Unless the program you're using needs to actually see the modem I'd try to configure the ICS (add an extra connection) to connect to it... if it needs to see it as a modem, (and you want to keep the PDA), get a cheap phone that you can occasionally use as a modem for this task
Using the ICS will disable the activesync for that connection, but if you wan't to disable the activesync just follow the steps mentioned before...

I reckon bluetooth is the only way to go for this, need to dig out my BT dongle to check but I think it should allow you to use the phones dial-up service.

Maybe this?
Maybe you need this?
http://www.mobile-stream.com/usbmodem_wm.html

Unable to get tethering or internet sharing working on VZW TP2

It's easier if I just post a link to the thread over at smartappsworld so I'm not stuck re-writing it all. http://smartappsworld.com/thread-t...-getting-error-692-hardware-failure-in-modem
I still have not been able to resolve these issues. Tethering worked without problems on my Q9M, but on the TP2 it gives me error 692 -There was a hardware failure in the modem - . Internet sharing isnt cooperating either. New hardware wizard in XP pops up for Generic RNDIS device. When I tried to feed it some drivers for Internet Sharing (pulled by another xda member in another thread here somewhere), XP gives me some bogus error about a missing entry in one of the .inf files that I pointed it towards. It doesnt specify which file, then it closes and there is a big yellow ( ! ) over Internet Sharing device in network devices (Driver not installed).
Thats a quick run through of the issues I'm dealing with. I really need this working as this is my only way to connect my PC to the internet. I live in boonie land where cable is nowhere in my neighborhood and dsl is too far to connect.
Yes I searched. I spent a great deal of time going through xda forums and Google... before I decided to post here. Thanks for anyones help in advance.
T.C.

I have not had a problem tethering my tp2 with verizon using Win XP Pro x64, or XP home x86.
The way that works for me is:
Run the internet sharing program, Not the VZW access manager crap.
Tell it to connect
After it connects, then plug in usb from pc to phone
The pc recognizes it as another network connection
It gets its IPs and all no problems.
Open up your choice of browser and off you go.
I have never had to install drivers to do any of this, and also it doesnt use active sync when doing it this way.
hope this helps.

I pulled the internet sharing program out of the Windows folder (made a shortcut ). The problem is when I connect to the PC. The install new hardware wizard comes up for Generic RNDIS device. This is after I clicked "Connect" in IS. I have clicked cancel , then it says install failed, your new hardware may not work properly. IS disconnects and Activesync starts syncing. I tried it the first way , letting AS sync once then turning IS on, same problem.
I dont use VZ Access Manager. I was forced to uninstall that and Activesync when suddenly the PC wouldnt recognize anything while the phone was plugged in. After that, the phones internet wouldn't work either so I then had to restore the phone to factory defaults via a hard reset. After resetting, I found that 228 wouldn't program the phone. The next day I nearly took it in to VZW. tried 228 again and it worked finally. Got my phone internet back and I'm back to trying to get IS working. I didn't install VZAM, but I do have the USB driver installed.
Are there certain files that are needed on XP for this? I am still running 32bit XP Pro if that makes any difference. Service packs maybe? I'm up to the point where I'm about to go out and buy a WiFi card and try connecting it that way. Something Has to work here.

The generic RNDIS ( Remote Network Driver Interface Specification ) drivers are part of the ActiveSync install and are needed for TCP/IP between the PC and the phone.
Install ActiveSync.
Plug in the phone.
Don't cancel the New Hardware Found - let it install the drivers.
Set up a sync relationship with the PC if you like - not needed.
When you tell ICS to connect, it should drop any other connection to the PC (Hard Drive, Active Sync) and make the Windows connect sound. Then you should see the network negotiation icon in the System Tray as it sets up the internet sharing.

When I dont cancel New Hardware wizard, it doesn't find any drivers to install. This is if I let it search for drivers automatically, and after Activesync is installed. See what the problem is here? What should normally work, doesn't. Are there key files missing in the copy of Activesync that is included on the CD from VZW? What am I missing here? When I turn Internet sharing on, on the phone, it always says something like ''Check USB cable connection'' and it never changes. The hardware wizard never finds the drivers, and when I try to point it towards driver files, it says theres an entry missing and wont install.
Grr..if you read through the other thread link above, you know how long i have been trying to get it to work. Frustrating!!

Wallking HotSpots
THE-COPS said:
It's easier if I just post a link to the thread over at smartappsworld so I'm not stuck re-writing it all. http://smartappsworld.com/thread-t...-getting-error-692-hardware-failure-in-modem
I still have not been able to resolve these issues. Tethering worked without problems on my Q9M, but on the TP2 it gives me error 692 -There was a hardware failure in the modem - . Internet sharing isnt cooperating either. New hardware wizard in XP pops up for Generic RNDIS device. When I tried to feed it some drivers for Internet Sharing (pulled by another xda member in another thread here somewhere), XP gives me some bogus error about a missing entry in one of the .inf files that I pointed it towards. It doesnt specify which file, then it closes and there is a big yellow ( ! ) over Internet Sharing device in network devices (Driver not installed).
Thats a quick run through of the issues I'm dealing with. I really need this working as this is my only way to connect my PC to the internet. I live in boonie land where cable is nowhere in my neighborhood and dsl is too far to connect.
Yes I searched. I spent a great deal of time going through xda forums and Google... before I decided to post here. Thanks for anyones help in advance.
T.C.
Click to expand...
Click to collapse
I myself use WalkingHotSpots http://www.walkinghotspot.com/. It is 24.99 for a lifetime license and currently they allow you to use the license over and over when you upgrade your phone. I used it first when I had the Touch Pro and now I am using it with my TP2. It is a program that allows me to add up to 5 connections and use my TP2 as a Hotspot. Now of course it would requre you to have your TP2 connected and charging via wall outlet. But basically it will allow me to connect 3G using my WiFi. I just used it Tuesday night while at church to connect back to my business server and resolve some databases issues. My laptop was running at an excellent speed and I was online over 2 hours with no drop connections. The walking hotspot website says that it will not work with Verizon but I can personally say that it does. I do not have the Internet connection software installed on my TP2 so I am going all WiFi for my connection. I added a password and name for my Walking HotSpot so no random joe could just drive by and conect lol and I was up and running in about 10 minutes. They don't offer a free tiral but you can try it for 1 month for 6.99 and if it doesn't work you will not have wasted 25.00. Just choose to use it for a Touch Pro and you should be able to get the download. I have had it over a year now and it has come in very handy especially when I go home to visit Mom as she has no internet and walking hot spots runs my husband's laptop and mine without any issues. So whatever you ultimately do I hope you get it worked out

WMWifiRouter
I use WMWifiRouter on my phone for internet sharing. It works great. This may be an alternative for you.
http://www.wmwifirouter.com/
(the site appears to be down at the moment)

I just loaded a program called PdaNet and was really amazed at how easy it was to install. Hooked up on Verizon @ 2.4mbps - actually faster than my DSL!!!
I've only tried it a couple times but I recommend going to here http://www.junefabrics.com/pdanet/index.php and download a trial version.

WMWiFiRouter
I second the vote for WMWiFiRouter. I used it on my Mogul and now on my TP2 (both with Sprint) -- no issues whatsoever -- more importantly, no tethering fees.

For me now, when i use USB or Bluetooth over ICS, my browser has to go to 3g.vzwdun.com. It didn't use to do that before. How can I keep the device from reporting that I'm tethering...

*SOLVED* ActiveSync via Bluetooth? NO COM PORT CHOICES?

Hi,
I am in need of some help on this topic. I am not certain if it is a ROM issue, an AS issue or a ME, like me issue.
Please don't flame me, done lots of googling, searching, etc and no luck.
Trying to sync with my laptop over bluetooth and using AS.
All goes well with the setup, each device sees each other, but when on the HTC Iolite, I go to
AS
CONNECT VIA BLUETOOTH
YES, to SET UP AN AS PARTNERSHIP
on the MODE tab, TURN DISCOVERY ON
on the device tab, Add a NEW Device
on the COM PORTS tab, to try to set up an OUTGOING PORT I do NOT have any options to select.
with my HTC Iolite I am running the latest iOmEgA rom installed.
Has anyone else had this same issue and BT with ANY other ROM on any other HTC or PDA? I have not flashed a different rom or tried this previously, so am not sure if it is a rom issue or a AS issue or what.
Thanks in advance for any help.
malloy0

I usually only get it to work if there's a partnership established already. Meaning you should first connect it by wire, do an initial sync, and then try using bluetooth.

malloy0 said:
Hi,
I am in need of some help on this topic. I am not certain if it is a ROM issue, an AS issue or a ME, like me issue.
Please don't flame me, done lots of googling, searching, etc and no luck.
Trying to sync with my laptop over bluetooth and using AS.
All goes well with the setup, each device sees each other, but when on the HTC Iolite, I go to
AS
CONNECT VIA BLUETOOTH
YES, to SET UP AN AS PARTNERSHIP
on the MODE tab, TURN DISCOVERY ON
on the device tab, Add a NEW Device
on the COM PORTS tab, to try to set up an OUTGOING PORT I do NOT have any options to select.
with my HTC Iolite I am running the latest iOmEgA rom installed.
Has anyone else had this same issue and BT with ANY other ROM on any other HTC or PDA? I have not flashed a different rom or tried this previously, so am not sure if it is a rom issue or a AS issue or what.
Thanks in advance for any help.
malloy0
Click to expand...
Click to collapse
zzattack, others...
Well...it took me almost all night, but I learned aha! that the devices were NOT paired, when they are and ONLY WHEN THEY ARE, do you have the option to set an OUTGOING PORT. so I got it to work, frankly, this should be easier than it is. Now, with this said the AS connection is very, very tempermental in that
1. I stop syncing,
2. leave my office, with my phone / PDA with me,
3. return and reconnect via BT, then
4. activate sync from the phone / PDA AS, via the Connect via Bluetooth
5. I get the SET UP AN AS PARTNERSHIP and say YES then I can resync
6. Again too, too funky, but at least no USB cord
7. In the end I wil give this sync method a whirl and see how it goes.
Thanks!!
malloy0

THread moved to Q&A

Best way to get it working properly is:
Delete any existing pairings on both the pc and ppc.
Check that the bluetooth program on your pc has a com port set up and that your pc is discoverable.
Go to activesync connection settings on pc and check that it is set to use the same com port as the previous step.
On ppc, go to activesync and attempt to 'connect via bluetooth'.
When it doesnt find a connection, select t create one, add device, and create a partnership with your pc. It SHOULD find activesync as a service.
Now you can close the bluetooth menu, and 'connect via bluetooth' again.
Make sure you are initiating the pairing from the ppc, and always initiate the sync from the ppc.