HELP !!!! - JAMin, XDA Neo, S200 Software Upgrading

just upgraded my orange M600 to (ROM My Diamond Edition (WM6.1), it says finished but phone just boots back to 3 colour screen even after hard reset? any help appreciated
mark

Marc,
wot steps did you do prior to flashing?? wots your IPL/SL and did you follow the wiki/guidleines to the letter??
If you want people to help you, you need to give more info rather than just "help"

Related

Brainless & Confused

Sorry guys & gals. New to this but cannot get a handle on the right thing to do. Can anybody help? Yes have read the basics but its not basic to me I am afraid.
I have got an HTC TYTNII from Orange. Need to unlock the sim card lock. Then would like to clear out all the Orange rubbish with a rom flash I think its called (havent got all the words right just yet). However as I paid a few quid forthe phone do not really wish to stew it!! If you know what I mean Harry! Cannot find hardspl etc on so on have ativesync fitted and running. All help greatly appreciated.
This webpage has a ton of files that have been extremely helpful to me so far...
http://duttythroy.lives-in.eu/
dont really know how to help
but
if you want to use hardspl is on the sticky thread
activesync can be downloaded from ms depending on the os you are using.
if you want more help tell me what you need and i will guide you
satiros
Lots of reading
I suggest you do lots more reading.
However, as a starter, go to :
http://www.imei-check.co.uk/kaiser-unlock.php
Pay for the unlocking service.
Then, and only then, install HardSPL
Following that, you can install any ROM you like (for Kaiser / TYTN II)
If you install a ROM based on Windows Mobile 6.1, chances are you will have to install a new Radio coding too. You should install the one for UK Vodaphone on :
http://wiki.xda-developers.com/index.php?pagename=Kaiser_Radio
Don't worry, it works on Orange, I have it on mine.
I recommend the Alex ROM even though it is still a Beta version, it is very good.
After you install the ROM and done a hard reset (keep both soft buttons pressed down whilst pressing the reset button with your stylus) install the radio, then do another hard reset.
Bingo, it's like a different phone.
Thanks for the info have carried out the first bit awaiting reply. Where can I download HardSPL please? Having looked at your recommended ROMs Which one?.. wow some cooking I can see I will be Flashing all day!!
cloudbasher said:
... Where can I download HardSPL please?
Click to expand...
Click to collapse
if you cannot look & find it right there in one of the sticky threads of this forum ... I'd suggest you do not attempt any flashing to your device !!!
as some of those stickies contained mandatory informations that you need to READ THOROUGHLY !!!

AT&T Tilt Stuck in Boot Loader

First off I'd like to apologize for what must seem like a duplication of a thousand other "stuck in boot loader" threads, but I've got what appears to be a fairly unique situation here and none of the fixes I've found searching the forum have worked for me.
Yesterday I flashed Dutty's WM6.1 ROM using JumpSPL, everything went fine. Today I went to install one of Niki's radios using JumpSPL again, but it got stuck at 99%. I went through the recovery process (several times) and each time after that got stuck at 0%. I've tried soft and hard resets, every time it comes back to the tricolor boot loader. MTTY doesn't give me the USB port option, even if I disable any and all tasks related to Mobile Device Center. Stock AT&T ROM won't load, says "This update utility cannot be used for your PDA phone." I can't flash HardSPL, after I hit enter it doesn't do anything. I tried the Vista fix available on Modaco, but it's not compatible with 64-bit Vista so I'm SOL there too. I'm really at wits end here, could someone please point me in the right direction? I've read time and time again here that as long as you still get the tricolor screen your phone is not bricked, but I seem to be all out of options and nothing has helped.
The boot screen displays the following:
RUUNBH (Top right corner)
KAIS1*0
SPL-1.56.0000
CPLD-8
Please, any and all help would be greatly appreciated!
I don't believe JumpSPL is intended for radio flashing. Flash HardSPL and reflash with a shipped AT&T ROM.
I can't flash HardSPL for some reason, when I press enter in the prompt it brings up nothing happens.
Good job there slick! Did you purposefully ignore all the posts about safely flashing your device?
If you don't mind a little berating & a ton of sarcasm, I may be compelled to take an interest in helping you to fix the device (or to see how badly you've f'd it up & if it can be salvaged at least). Anyway, find me on MSN IM if you want & I'll walk you thru the steps for diagnostics & if possible, recovery.
You'll have to promise not to rush into doing any more stupid things though.
MSN/Live IM: ([email protected])
Yeah, yeah, gung ho, help the newbie, man this is getting old.
for I friend
Hi there ...
a friend of my has a same problem with his Vodafone VPA compact V, can I give him your hotmail ?
Or can you my little tutorial ?
thanks in advance .
Srdjank
T- Mobile MDA Vario
owner , when I am big I will have Tytn II
Managed to get it straightened out, for some reason MTTY 1.42 wasn't working properly with my system but 1.16 did the trick- Rebooted through there and flashed HardSPL then loaded my ROM without a hitch. Thank you everyone for being so responsive and helpful!
srdjank said:
Hi there ...
a friend of my has a same problem with his Vodafone VPA compact V, can I give him your hotmail ?
Or can you my little tutorial ?
thanks in advance .
Srdjank
T- Mobile MDA Vario
owner , when I am big I will have Tytn II
Click to expand...
Click to collapse
Ahhh, one more staisfied customer! Glad I could help out srdjank. Just remember that you can't treat a Kaiser like it's a Wizard. Similar yes, but there are different processes for safely flashing.
So far I've seen that Flashing Radios with JumpSPL is a sure recipe for bad memory blocks. Always, ALWAYS, HardSPL!
i also had the same problem when i tried to sim unlock my mda vario iii in progress screen the progress stuck at 95%. i would appreciate any help to recover the phone. thanks in advance

pm300 help

hi everyone,my problem is that after uprading my pm300 it stuck into bootloader any idea on how to solve this problem and is g4 i realy need your help urgently thx in advance
What ROM did you upgrade to? If it was to a WM6 ROM using the "new" upgrade method, you may have failed to hard SPL your device. What ever the cause, the solution (as ever) can be found on the wiki.
yes you are right i didnt HARDSPL my device befor updating with (ROM
MY GREEN EDITION WM6.1)is there any hope that my phone will come back to live,by the way thx for the reply
If the device can get into bootloader, it should be possible to recover it In my previous post there was a link to the wiki page for recovering devices from bootloader. If you want any more info, I'll be happy to try and help...
thx for the quick reply but my problem now is if i connect the phone i can see the usb on the screen alright but the computer doesnt sync it and if i go ahead and update the rom i get error make sure the usb/cradle is connected properly i dont know what to do plssssssssss i need help to revive this phone thx in advance
thx mr 13v5y for your help my is alive and working like never before thx to you once again i rely appreciate the help you gave me more greep to shoulders ve a nice day
No problem! If you ever have any issues, take a look at the wiki first though
I double posted! I blame Linux!

Death of my Kaiser, Help please

Please, I need urgent help ...
Kaiser dead when installing official ROM 6.1. It has been hung at 15% after having put the Jump SPLv1 because it's Vodafone. Now in Boot lights and not leaving there putting:
KAIS130
SPL-1.56.0000
CPLD-8
I try to install the ROM again and gives me the error of ID Provider.
Thanks!!!!!!!!!!!
I'll be nice ...
Read this link:
http://forum.xda-developers.com/showthread.php?t=369282
You need to review the info in there to understand the process of flashing. Simple answer - Jump SPL is only use to put a HardSPL on your device.
Three Words my friend.
"Wrong SPL Version"
Now go and read the above link and the Kaiser FAQ WIKI and GWENI. Before you make your phone a big expensive paper weight..,.. If you haven't already.
Thank you for your help, and got me out of the tricolour and has restarted its old ROM with Vodafone. The question now is to switch back to mind the new ROM official HTC and I was back to being 15% and hung again. Any solution? I have already cooled files, etc.. Not because it does at 15% as did the first time that I feel that I had hung the computer or something.
Thank you for everything!
Did you install HardSPL?
If you don't have a "modified" version of SPL your phone will only accept ROMs from Vodafone.
sercontri said:
Thank you for your help, and got me out of the tricolour and has restarted its old ROM with Vodafone. The question now is to switch back to mind the new ROM official HTC and I was back to being 15% and hung again. Any solution? I have already cooled files, etc.. Not because it does at 15% as did the first time that I feel that I had hung the computer or something.
Thank you for everything!
Click to expand...
Click to collapse
Install jumpspl
Then install Hard spl
Then flash new rom
Thank you so much for your help, finally I've succeeded and I could install the new ROM HTC. I was beginning to worry, jeje. A hug and muchisimas gracias.

HTC TYTNII Bootloader issue

Hello Guys,
I have been facing this issue since a week & I'm looking to get to a solution by reading thru the sticky's posted. but, im being confused on what steps i need to do clearly. Could anyone help me in getting me out of this situation?
My Phone is a HTC TYTNII Unlocked version.
Thanks a ton!
Issue: Bootloader gets stuck in startup screen with Red/Gree/Blue/White colored horizontal bars. In one of them. It displays.
KAIS130 MFG
SPL-1.0.OliPof
CPLD-8
i tried using Mtty.exe & used Boot command as directed in the earlier posts, It fortunatley started up the booting process & phone is back to is Normal mode. but again i do the soft reset on it. It again goes back to the same issue as above. I really need a help if i'm doing something wrong in my process?
Pls guys Help!!!!!!
Regards
Sean
Please post on the Stuck on SPL thread .. (mod, please move it there )
Have you tried hard reset the phone? Hopefully the ROM will be loaded fresh again.
Please post issues in my thread.
You'll probably be best upgrading the SPL via the SD card using one of the "nostuckinSPL" SPL's from this thread : http://forum.xda-developers.com/showthread.php?t=498320.
If you are using WM6 you want 1.1, if you're using WM6.1, a 3.* version.
Ta
Dave

Categories

Resources