hi .. every one
after i want to upgrade my Qtek 8310, i used tera term pro format all, after reset device blank white screen tot go to color screen, USB connection failed, Any one have an idea to connect it to PC please HELP ME.....
sorry to say this but there is nothing you can do once you see white screen the phone is useless
It's dead, why did you format ALL ?
Just format BINFS only !
Related
hi .. every one
after i want to upgrade my Qtek 8310, i used tera term pro format all, after reset device blank white screen not go to color screen, USB connection failed, Any one have an idea to connect it to PC please HELP ME.....
I stated to update ROM but unfortunately unplugged the cable with mistake.
Now my JAM is showing only black Screen with Text USB V1.02 . What i should do now, After rebooting many time, nothing happend, same screen.
Please help
You need to flash it again:
- fully charge your magician ( remove battery cover and plug in the charger )
- after you start your magician in bootloader ( You press power button + camera, and hit reset with stylus )
- download the rom u want ( magician wiki has loads of them and dont forget to disable USB Connections on Active Sync )
- and use matupgradenoid if you have country id error.
Rom Update Problem
Hi,
Thanks for Writing me.
I repeated all the step you sent me.
I rebooted the device and it shows USB Boot Sceen.
I downloaded ROM from clubimate.com and tried to install.
but its not working. its says unable to connect device.
Attached is the error screenshot. Please help
Hmm, can u fully upgrade your rom ?
Hi
I have the same problem.
When i try to load the rom, the device "boot" and stay in blank screen!
I tried what was sugested, bu t with no luck!
I ideias,
Thanks
Nuno Cancelo
I had a similar problem. I tried to flash the ext ROM with NZ Vodaphone and it didn't finish. The Phone would boot then hard reset. I tried to reflash with the ROM file from PC but it keep failing. Luckily I have a spare Jam. I dump the ROM of the old phone and reflashed it to the broken one. To dump the ROM of a good Imate Jam goto http://forum.xda-developers.com/showthread.php?t=230151
Once you have done this, Reboot your phone into the ROM flash menu with the SDCARD that you used from the good phone into yours.
I think from there it sees the ROM files and gives you options to reflash.
Good luck.
How can I fix this problem, the phone does not want to enter into arrangements Booth, the problem is a program StorageManager, then it does not want to load win mobile, hard reset and give accordingly pressed 0, the phone off and nothing there, it even laptop recognized, please advice on what to do in this case, how to put it in standby Booth, so I can reinstall it.
Rom v V5.2.20931 WWE
Radio 1.14.10
Rom data-11/13/08
Protocol v-42.49.Р8
R 1.14
G 42.42.P8
0 D.07.70 RAN
problem is solved, I found the right combination of buttons, then came into phone mode flash, now works perfectly
please help!!! O2 XDA Exec - CANT OPEN
lm still in the official o2 rom wm5, but last week, l hv try to install a file "Xda_Exec_Upgrade_v1.30.162" through my computer (window 7), when i installing the file , l saw my xda exec's sceen is freeze!!!!! so l just unplug the usb cable through my computer, and soft reset my xda exec, but a worse thing happen. when it it start loading is freeze at the o2 screen with 3 line word at right down corner - ( R 1.09.00 ) , ( G 42.42.P8 ) , ( D 1.30.107 WWE ). And so strange, when l charge my exec there is no light showing, when l remove the battery the light is showing red. l hv put my battery to my friend exec it work!!!
so please help!!!!
1. screen keep freeze at o2 screen???????????
2. when remove battery, and then put it back and charge, the o2 screen come out immediately. without touch any button????? and no light showing.
3. only showing red light when remove the battery????
sorry for the poor english
please help.............
@ jeffeu : put your universal (exec) in bootloader then try to flashing (install) it again.
and do not forget to read xda-wiki -- universal (our device).
Try to activate bootloader and from there to flash, I have a problem with the Win Seven and flash only XP
I have a hp ipaq hx2190, and i want to put wm6 on it.
But when i try to put it in bootlader mode i get a white screen.
So i searched around the forum and the white screen seems normal.
so i runned the update software, but it stucks on verifying the information on your ipaq pocket pc.
and when i not put it in bootloader the progres bar stucks at 0.1%.
please help me.
best regards shailo
ps. sorry for bad english im dutch
i forgot to say it ends up in a error saying something about active sync error
my pc gives a bleep when i connect it
come on no body
Hi guys,
My Imate SP5 is stuck at the first screen where the IMATE logo (clubimate.com) comes up and then it does proceed any further ....and after about a minute it becomes blank.
I tried to do a hard reset but even that ended up in the blue screen .
I got it into the bootloader mode and tried to load a fresh rom . However the tera term pro says that it cannot open the device.
I am stuck at this point and cant proceed further ...
Please help
Farhan
Did you disable USB in Active Sync?