Just tri to update my UNI to Pdaviet Rom 6.1 latest !!
When going to bootloader just went dead !!
No charge .. no turn on !!!
Just conect to windows and say's "new device ... but windows can not identity device"!!
Can any on help me?
Just move to full reset .... led blinks red and goes to full reset screen but canot make full reset ...
How to enter USB bootloader mode?
jllb said:
Just move to full reset .... led blinks red and goes to full reset screen but canot make full reset ...
How to enter USB bootloader mode?
Click to expand...
Click to collapse
Please READ the Wiki, you´ll find all you need there
Good luck
Uni not dead
In wiki .... i did find the solution ...
Try a few but my UNI is alive !!
Best regards to all.
jllb said:
In wiki .... i did find the solution ...
Try a few but my UNI is alive !!
Best regards to all.
Click to expand...
Click to collapse
can u help me out i am stuck at the screen where it says press x to restore defaults and 0 to exit i have tried everything exit bootloader mtty everything given on wiki can u tell me how you got your uni working again
mandy_bikerboy said:
can u help me out i am stuck at the screen where it says press x to restore defaults and 0 to exit i have tried everything exit bootloader mtty everything given on wiki can u tell me how you got your uni working again
Click to expand...
Click to collapse
Strange that you couldnt solve your problem after reading the Wiki
Try to reinstall to another different ROM form cero, perhaps this could help
Good luck
mandy_bikerboy said:
can u help me out i am stuck at the screen where it says press x to restore defaults and 0 to exit i have tried everything exit bootloader mtty everything given on wiki can u tell me how you got your uni working again
Click to expand...
Click to collapse
Sure to help ... just did this WIKI solution .. and then a new rom !!
http://wiki.xda-developers.com/index.php?pagename=Uni_Stuck_Bootloader
I try method 0, not method 1 .. just work with me !!!
Related
i have tired v3 wm6 update and..after the update my screen is stuck...at o2 sign..with bubbles,, the four red words appear on the screen but doesn't change anything...
i'd like to reflash back but it doesn't seem like connecting to PC via USB..
what do i do...?
and i found..
it just stopps in the boot loader mode and turns to black screeen .. and that's it...
I cna't even connect to USB so which means i can't flash back to normal..
is there any suggestions??
like resseting back up?
I have tried soft and hard reset but both don't seem to work.. still stuck in the bootloader mode....
What do I DO>>>>>>>>>>>>>....please help me...><
Try to Enter Bootloader:
Hold down the camera button and reset the device. (Boot Loader Mode is: Press Camara + Soft Reset, then release soft reset and keep pressing camara button till appear the Boot Loader.)
However, you have to write in the right post, i guess you mean the Ohlala_WWE_WM6_v3 ROM. If you had read the entire post youl'd know that this one is bad. V4 should solve the problem.
thanks for your answer !!but..
yes i have entered to that 3 coloured mode(bootloader mode like you said)
and I have connected my usb and it showed USB on the left corner ...
but the problem is...after I connect usb.. computer doesn't recognize my O2 device so I can't reflash my rom with SMart 1.
I ran the file called "upgrade_rom" for smart1 wm6 but it keeps telling me that "no device found.." so..
what should i do...
please help me...
and i really thank you for your response!
llvll said:
yes i have entered to that 3 coloured mode(bootloader mode like you said)
and I have connected my usb and it showed USB on the left corner ...
but the problem is...after I connect usb.. computer doesn't recognize my O2 device so I can't reflash my rom with SMart 1.
I ran the file called "upgrade_rom" for smart1 wm6 but it keeps telling me that "no device found.." so..
what should i do...
please help me...
and i really thank you for your response!
Click to expand...
Click to collapse
You cannot use "upgrade_rom.bat" to flash ur device with RGB screen. The bat file is for upgrade, not for fresh install. It means that you have to install AKU2.xx NVID.exe (executable) first. The .exe file can recognize ur device via RGB screen.
After reset ur device with AKU2.x and successfully connect to the PC vis Activesync, you then can run upgrade_rom.bat.
And... don't be too panic. You have to read more.
thank you so much !!
i' ll try it right now !! omg ...i'm so relived that I got an answer !!!
you are the best!
um...
i search it thru the forum.. but i Can't seem to find that file... AKU2 .xx.nvid..
can you please direct me to download that program?..
please... thanks again !
llvll said:
i search it thru the forum.. but i Can't seem to find that file... AKU2 .xx.nvid..
can you please direct me to download that program?..
please... thanks again !
Click to expand...
Click to collapse
here http://www.4shared.com/file/12240109/ca99469a/RUU_Prophet_220734_2207114_024721_NVID.html
thanks !!!
is there an o2 version of NVID??? anywhere? i've just installed this but it says Qteck..
No it's a Qteck ROM not an O², I don't know if there is a 2.20 NVID ROM from O² here, sorry.
i've just installed AKU...thing
after installing AKU...
my phone doesn't seem like it can connect to Antisync program..
is there any reason why..this is happpenin..?
make hard reset after flash firmware!
yese !!
i did the hard reset but still Activesync says It cannot be connected...
is there any other way to fix this???
I don't no if this can help but.. my device orignally was O2 and now i flashed up with Qteck AKU...
does this matter...?
if then would you let me know where i can find o2 AKU file..please...?
thanks for your reply !
you could try this. Someone else posted it here, and when my phone stopped connecting after some update it fixed activesync. It's a switch.
llvll said:
i did the hard reset but still Activesync says It cannot be connected...
is there any other way to fix this???
I don't no if this can help but.. my device orignally was O2 and now i flashed up with Qteck AKU...
does this matter...?
if then would you let me know where i can find o2 AKU file..please...?
thanks for your reply !
Click to expand...
Click to collapse
Had O2 ever released HTC Prophet?
Sorry but I'm not O2 fan.
I have only Prophet so I know only Prophet.
You could go to the right thread for ur device O2 and look for the right .exe file.
PS: is it XDA Neo? If it is Prophet it should be OK.
Try holding Camera+Comm buttons during pressing reset button ur device will ask u to Format something. Press send button (green phone button) and try again.
Safe
Thanks guys, you saved my S200
Matos
Ohyea !!
I found the solution !!! dat Qteck one worked but um....
yea and my phone is Xda Neo !!!
the black one !
thanks for all the replies guys !!!!!!!
Whoohoo, thanx for mentioning the bootloader mode (by only holding the camera button ) Now I can try another WM6 rom, which does work I hope
hello there same problem here.. mine is also xda neo.. when trying to upgrade wm6 it stuck exactly same as yours..how did u fix the problem? thanx for ur advice
Hi all
I was upgrade my Jasjar by mistake with jam rom, after upgrading my Jasjar didn't work and the screen didn't show any thing (black screen). Please I need help, if any one can solve this problem give me the solution.
Hi!!!
Take it easy.
Trye to see if the device can go to "bootloader" press "camera"+"on/off"+sof reset.
IF you can go to "boot loader", see the wiki in this forum.
Me too have the same problem, but i was enable to fix-it.
Remove the batery form device, until you find the solution, I think tat you can not charge the batery.
(sorry, by not making links, but I am Flashing my Universal)
Good luck
Thank you, my friend
I tried many times to go to boot loader but I can't, any how I am waiting for the solution.
try this . brightness button + power button + soft reset buton (using ur styles ofcourse) lol . then u enter bootloader the hard way i guess. from there connect the usb althou ur active sync may or may not detect the connection . but on ur fone the serial link wud change to USB . then try flashing a shipped rom 1st then . after that do CID unlock (that if u haven done it yet with ur fone). then flash any rom of ur choice
Look in Wiki... there are many methods =) Wiki rules!!
it saved my exec.. =)
i have the same problem and i treid this way it does not go some one told me that to charge the battary by another jasjar but right now i am not able to find one els to charge the battry..
also i did chat with imate support and they advice me to send it to the service center and i don't know what to do.
even wiki does not have a soultion for that.
I think the bootloader is broken and need to be reinstall but how????
of course you've got this bad rom form ce4ara.com right
it's soo bad
well how can the bootloader b fukd man ?? lol anyways here r the two bootloader editions the instructions to which u can find in universal wiki . here is the link ::
http://wiki.xda-developers.com/index.php?pagename=Universal_Bootloader
well when u connect ur fone in bootloader mode to the pc do u c the "serial" on the top change to "usb" ?? if so go here ::
http://wiki.xda-developers.com/index.php?pagename=Uni_Stuck_Bootloader
get the mtty utility and do as instructed
ps:: dumb azz customer care knows jus two things if u ask them anything about a screwed jasjar. :: install new shipped rom or get to service centre lol. not any other excusehas added to that list as of yet
aahmed12 said:
of course you've got this bad rom form ce4ara.com right
it's soo bad
Click to expand...
Click to collapse
try stable roms and not beta version to test ur fone efficiency for instance for start install jus shippd rom as they are the most stable with almost no bugs ! so always wen u have a broken jasjar n need to b reconstructed innercorely lol use shipped rom. thats wat i do ales lol
I tried these both links before the problem there is no serial or USB on the screen it's completly black no even when you connect it to usb gives u message on computer unrecoginze device then how to upgrade or reinstall bootloader??
with MTTy says usb device not found frist i have to run bootloader again on my jasjar frist to do what writen in wiki
does ur fone charge up by the wall charger n the charging led turns red? ? mayb ur fone not properly charged or so to even enter bootloader ??
I tried all mouthed but I can't fix it, last tried I toke it to the technician and he said the board was damaged.
Thank you,
Sorry for that but first try to charge you battary by another jasjar it might work
okay man .. if u didnt already solve ur prob
i had that prob b4 & here's the steps i took ( i thought i damaged my chip 2 )
1. disable usb connections in active sync 4 now (or remove it from ur pc)
2. get into boot loader by pressing backlight botton+power botton .. dont press soft reset
3. connect ur USB
4. open the MTTY utility .. download it from the wiki if u dont have it
5. press on USB botton on the right of the MTTY window
6. on the window that appears press (enter) ... a wiered word will appear .. press enter again
7. write task 28 55aa (just write it dont copy or it wont work) and press Enter
8 . write task 28 55aa again and press enter
now u can close the MTTY and setup a new rom on ur device .. just choose a proper 1 from this forums
these instructions worked 4 me & i hope u find it useful if u didnt already solved ur problem
jasjar problem
I completely have the same problem with my jasjar and non of these steps worked with me cuz it wont get in a bootloader
(It wont startup at all)
my problem is not solved yet.
hi all...
last time i try to flash my universal with wm6.1 , i see an error on my pc on ROM Upgrading progress... and after that i try many roms (wm5 Original,wm6 & 6.1) for several times but i see that error again & again & ... now my pc can detect my device and on bootloader mode the "Serial" change to "USB" when i connect it to pc but i can not flash the rom successfuly,and i can not hardreset it or came back to my old rom too
PLZ help me to solve the prblm
sorry 4 my poor english
Read Wiki.
Do a DOC format using mtty and reflash, things should be alright.
Regards
You shold find answeres here:
http://wiki.xda-developers.com/index.php?pagename=HTC_Universal
Tanx for the answer ... i will try it
tanx a lot...my universal back to life
mat226 said:
tanx a lot...my universal back to life
Click to expand...
Click to collapse
Good, I had a fat problem with the clear storage from Ranju's 7.7
I used MTTY to format the flash and my uni backs to life too...
i think i found d solution actualy i was flashing a rom but 99% it stopped, nd mah fone in bootloader mod, trying 2 flash again but cudnt got succes i hve tried mtty 1.42 utility also,,nw after serched many thread i m dwnloading d bottom rom http://rapidshare.com/files/43423464/Xda_MiniS_LaunchROM_v154102.exe nd i will try dis
arundhiman said:
active synchronisation doest work in bootloader mod
please help becase of my wizard in bootloder mod when i was flashing it light gone nd it is now in in bootloder moid nd active synchronisation not work
it shows datacable not recognise when i cnnect it
and upgrade error is ppc not cnnected or active synchronisation not working properly
Click to expand...
Click to collapse
but you still can flash from bootloader (many times i have flashed using the bootloader.....)
and yes, the PC dont recognize your WIZARD on bootloader mode, but still you do not need to be "syncro" to flasha rom on the WIZARD.
I strongly suggest you to read some info to know "how to" flash a semi bricked device
Good luck
can i delete mah dis post how
arundhiman said:
can i delete mah dis post how
Click to expand...
Click to collapse
lolwut?lolwut?lolwut?lolwut?lolwut?lolwut?
arundhiman said:
can i delete mah dis post how
Click to expand...
Click to collapse
because of till now there is no solution i get, wenever i cnnect via usb everything is right but cnt do flash ipl spl both are 2.26 and usb shows bottom but shows updating error not connect to pda
i am cmes again there
plz help is my device is totaly bricked or not
...it is..stuck in bootloader screan no hard reset possible cover it....and shows not connect with usb or cradel wenever i m upgrading
hi man
i have one jasjar and my device dont turn on,only red light work in charging
and when i go to in bootloader i see this message "DOC version is error"
any body can help me?! how can i fix my device
majdifar said:
hi man
i have one jasjar and my device dont turn on,only red light work in charging
and when i go to in bootloader i see this message "DOC version is error"
any body can help me?! how can i fix my device
Click to expand...
Click to collapse
Have you tryied to hard rest, or look for HTC Universal in the XDA Wiki there is all information you may need. Good Luck
i do this too man but dont work
Reza WM said:
i do this too man but dont work
Click to expand...
Click to collapse
Try use MTTY tool if you stuck in the bootloader. Remove the sim card, The SD Card and have your battery fully charged. When u use mtty you must disable active sync's usb connectoin on ur pc so the mtty can connect through this port. What is the status of your device at the moment? what happens when u connect it to your pc?
here is my problem with mtty
majdifar said:
hi man
i have one jasjar and my device dont turn on,only red light work in charging
and when i go to in bootloader i see this message "DOC version is error"
any body can help me?! how can i fix my device
Click to expand...
Click to collapse
Hi, Your Battery Is Dead, U Need To Change One. It Does Not Link To DOC Format. I Have This Problem Before.
Hope It Helps