hello,
just forget this ! it was a hardware issue! ;-) solved it! - thank you anyway.
moderator: you can delete this post !
hey dude! i have the same problem with my magician.. what did you do? can you help me? thanks in advance!
What I find that solves my problem, is to pace my phone in FLIGHT MODE, then exit FLIGHT MODE again.
i've already tried that bro.. nothing happened.. it didn't even helped me.. sometimes my Magician gets network signal.. but when i use it, the network signal disappears again.. can anybody help me? thanks in advance again guys.. god bless!
^dane.15^
daniel15 said:
sometimes my Magician gets network signal.. but when i use it, the network signal disappears again
Click to expand...
Click to collapse
This happens to me all the time.
What I usualy do is to enable 'flight mode' then disable it again. At one point, I thought my internal antennae had gotten loose.
i don't know if it's the internal antenna.. but i already checked inside the unit.. i already tightened the screws and some loosed hardware.. tsk.. i hate it.. i can't use my phone when it's emergency..
Daniel15, did you try enabling, then disabling FLIGHT MODE?
Related
hi everyone.
im new to wm6-can navigate and use reasonably well-came from a prophet before.
my problem is when i pick up the touch after it being idle/unused for some time when i check the screen, the gprs has somehow connected itself. even if the touch has been keylocked it still seems to be able to connect to the vodafone network.
is it possible that the power button also acts as a connect button and i dont know about it??
the touch is stock standard and is only really used as a phone. any help or thoughts would be appreciated!!
also the bluetooth turns itself off reguarly when its connected to an earpiece. it hasnt happened incall but it seems to happen when the earpiece/touch are idle and nothing has happened between them.. again any thoughts appreciated. thanks in advance.
regarding your first question: are you using the "Weather"-apllication that comes with the cruise?
Try using this free application. I am using it too.
http://www.modaco.com/content/Pocket-PC-Software/246171/New-FREE-Utility/
MoDaCo_NoData.CAB
jaiden said:
regarding your first question: are you using the "Weather"-apllication that comes with the cruise?
Click to expand...
Click to collapse
yes i have used the weather app before-but i can leave the cruise on the bench overnight,keylocked and when i get up in morning gprs is connected. today alone this happened approx four times that im aware of. keep in mind the cruise is keylocked and its still turning itself on. thanks.
donchen said:
Try using this free application. I am using it too.
http://www.modaco.com/content/Pocket-PC-Software/246171/New-FREE-Utility/
MoDaCo_NoData.CAB
Click to expand...
Click to collapse
do i paste this in a certain directory on the phone?? what do i do with it..sorry!! newbie still learning.
start>>settings>>connections>>advance>>select network>>and select other than your operator (e.g. my work network)
Top Mario said:
start>>settings>>connections>>advance>>select network>>and select other than your operator (e.g. my work network)
Click to expand...
Click to collapse
that will work! thanks top mario.
hi im havng problems enabling wifi. but i have realised when hsdpa is enable wifi can not be turned on is this normal. when i disable hsdpa wifi can be enabled. is this correct?
No this is not normal. They should both work. Can you give us any more info, ie. did it ever work? Have you tried a hard reset?
hi,
just found out that my camera doesnt work now! did work b4. yes hspda did work b4 with wifi i have hard reset a few days ago. should i hard reset it again?
rom 1.25.405.1 WWE
radio 1.58.21.23
has anyone found a reason why wifi cannot be turned on??? min use to work fine and now it doesnt switch on i have hard reset it has made no difference,
intrancer said:
has anyone found a reason why wifi cannot be turned on??? min use to work fine and now it doesnt switch on i have hard reset it has made no difference,
Click to expand...
Click to collapse
Are you sure you have performed a HARD reset. A hard reset means that your device is in the same state as when you first took it out of the box.
If then the WIFI fails to switch on, you probably have a hardware problem and should send the device for repairs.
I have had a problem with the WIFI function as well. In my case it was caused by a program which allows the Cruise to act as a WIFI access point. After using that software once, the WIFI cannot be switched on any more. I have had the same problem on my "standard" Touch.
Robin
hi mate,
yes i it is a hard reset everything deleted and restored to orignal state. looks like i need to contact HTC. did u send yours in for repair or did the hard reset resolve the issue?
the strange thing is the wifi did work before
intrancer said:
hi mate,
yes i it is a hard reset everything deleted and restored to orignal state. looks like i need to contact HTC. did u send yours in for repair or did the hard reset resolve the issue?
the strange thing is the wifi did work before
Click to expand...
Click to collapse
In my case the hard reset resolved the issue both on my original touch and on my touch cruise. The latter needs to go back for repairs now anyway because the speaker has decided not to function anymore.
Robin
intrancer said:
has anyone found a reason why wifi cannot be turned on??? min use to work fine and now it doesnt switch on i have hard reset it has made no difference,
Click to expand...
Click to collapse
I'm having a similar problem on my Cruise. My WiFi is switching on in the Comm Mgr. I see the icon working for a couple of seconds then it seems to freeze. I try to sign in on Skype or access an Internet site with no success. Strange. It was working a couple of days ago.
Am at the moment using a Laptop via a WiFi connection, so it's not a general WiFi connection problem.
Appreciate some advice.
Hi
Just a quick extra comment to my question above. Would a Hard Reset really help? Or is this just an option to find a solution?
hi i called htc and returned the device for repair i will update on the progress
Idk wats the problem but ever since i did hardspl on my phone active sync doesn't respond to my phone anymore but the problem was that that i was trying to flash with a customruu instead i used hardspl by mistake..so if anyone know how i can fix the problem it'll help..thanks
so no answers huh
go to settings, connections, usb to pc. Disable the advanced network thing and then try
OMFG THANK YOU SO MUCH DUDE! it works perfectly man i appreciate the help and reply
omg thank you so much!!
Hi, Guys.
I have very strange problem :
A few days ago, suddenly I got No GSM at boot screen.
First, after some reset, it show My Radio version back.
But now, I must take out my battery for about 1 or 2 minutes and then put my battery back in and then power on my Universal to get my Radio Version back. Or else it show No GSM.
I have do SIM Unlock, reflash original ROM. But the problem still occure. My device is Super CID already.
What going on with my Universal? I cannot get my radio working with soft reset.
If my radio broke, why I can still get it with battery take out and in?
Note : I do Radio upgrade, with take the battery out, and place the battery in, and then hold Bulb button + Reset + Power. Or else it will give me error 114.
Now I'm using Radio 1.15 and ROM Tomal 8.5. I post this with my Universal + Opera Mini 4.2.
Thx for Ur help, Guys. Cheers...
PS : Sorry for my bad english...
Problem Solved!
Problem solved!
Hi, guys, finally I found the solution for no gsm... (for me... Maybe it can help other...)
First, U must have your radio version on Ur boot screen. For me, I take my battery out for at least 2 minutes, and then put it back in. And then power the device on. Then U should see Ur radio version.
Second, U change Ur Network selection to manual, wait, and then choose Ur Operator.
Third, On communication manager turn off, and then turn on Ur Phone.
It works for me, may not be to other. Just try to share...
I really2 hope this can help others..
Cheers... And Good Luck.
Hi antonny ,
Now I can't solved this problem
Can you tell me step by step to fix it for work again. -*-
I tried to do follow that you told . But it's still not working.
Thx....
sand
works for me, may not be to other. Just try to share...
Hi, hacker_boy3, It works for me, may not be to other. Just try to share...
First, U must have your radio version on Ur boot screen. For me, I take my battery out for at least 2 minutes (maybe more for others...), and then put it back in. And then power the device on. Then U should see Ur radio version.
If still not, try to reset...
If U cannot pass this step (Still show no gsm), I'm affraid that Ur Radio Hardware is fully damaged.
Second (If U can pass this the first step), U change Ur Network selection to manual, wait, and then choose Ur Operator.
Third, On communication manager turn off, and then turn on Ur Phone.
It works for me, may not be to other. Just try to share...
I really2 hope this can help others..
Cheers... And Good Luck.
Just wanna share, may be it can prevent No GSM..
Hi guys, at last my uni get no gsm (when I pull out the battery.. (duh!)... If U're succedd with my step, please don't pull out the batterry)...
Any way, I bring it to repair centre.
After My uni fixed, the repair centre said that every pda must turn off radio every day, cause as far we know, our device can't be turn off (unless we pull out&put it back without press power button). So our radio can get rest... (hmmm now I know why my uni get no gsm.. cause it never turn off and always on for years! Can U imagine that... The Uni radio always searching for signal 24 hour 7 days for years...No wonder my uni radio get broke...)
Anyway, from now, everynite I turn off my uni radio and turn it back on in the morning... Also, now I use ROM Tomal/Ranju 7.7 (cause this ROM can still boot quick&correctly with no gsm...(just prepare if the problem occure again..)
Thanks.. Hope this is right and do a little help...
Hello everyone, im new here also im new user of this big machine -Tytn II
From begining my jurney with it i notices that My wifi dont work, on settings i see option to run WIFI, but when i try Start it on commmgr its trying but its go back to off mode.
I tryied put upgrade on my 6.1 WM but its still the same, later i tryied use some registry tweaks but the same.
Ive serched whole internet for solution of it, PLEASE help me.. im loosing my hope ;/
Hope that i poste it on good place.
Sorry for mess, cant wait for answers!
Regards ADAM
to ensure, see your wifi's power save mode. go to comm manager, press settings at bottom right and choose wifi. under power save tab try avoid adjusting to best battery. see if it solves your problem. if not u might having a faulty wifi kaiser. im using 6.5 so i might slightly different than yours. hope this help good luck
adamekkp said:
Hello everyone, im new here also im new user of this big machine -Tytn II
From begining my jurney with it i notices that My wifi dont work, on settings i see option to run WIFI, but when i try Start it on commmgr its trying but its go back to off mode.
I tryied put upgrade on my 6.1 WM but its still the same, later i tryied use some registry tweaks but the same.
Ive serched whole internet for solution of it, PLEASE help me.. im loosing my hope ;/
Hope that i poste it on good place.
Sorry for mess, cant wait for answers!
Regards ADAM
Click to expand...
Click to collapse
Install an official HTC ROM. Then disable power save in wifi settings. Turn wifi on and try scanning for networks.
Try changing Radio version as well. I recommend 1.65 or higher
Ok, ive been changing power mode before. after playing with registry i cant go to advanced options of wifi.. only white screen.
Can i have download url? and in shortlist what to do step by step. Beocuse i dont want to mess it again ;/
BUMP
also got problems with batteries, gone sleep with 50% and after 7 hours, i heard alarm and phone fall down. - new soft can fix it ? or its just battery?
adamekkp said:
BUMP
also got problems with batteries, gone sleep with 50% and after 7 hours, i heard alarm and phone fall down. - new soft can fix it ? or its just battery?
Click to expand...
Click to collapse
The problem is that Kaiser uses 3G which uses lots of energy. In WM 6.5 there's option in Comm Manager to turn off 3G (I can't find anything similar in WM 6.1). The internet connection will be slower, but the battery performance will slightly increase.
help me guys, i cant run setup when i use D-pad.
I want to instal android to check wifi etc.
can i have Yours solution ;/
ive instaled android hero from sdcard. but wifi still not working, the same with bt, when on WM bt was working, dunno maybe wifi is hardware problem ;/
Have you checked the rear panel of the phone where the antenna is?
check the pins they could be bent of broken off
Just a thought
They'r looking good