[q] [wifi][wlan] tytn ii - Tilt, TyTN II, MDA Vario III Windows Mobile ROM De

Hello everyone, im new here also im new user of this big machine -Tytn II
From begining my jurney with it i notices that My wifi dont work, on settings i see option to run WIFI, but when i try Start it on commmgr its trying but its go back to off mode.
I tryied put upgrade on my 6.1 WM but its still the same, later i tryied use some registry tweaks but the same.
Ive serched whole internet for solution of it, PLEASE help me.. im loosing my hope ;/
Hope that i poste it on good place.
Sorry for mess, cant wait for answers!
Regards ADAM

to ensure, see your wifi's power save mode. go to comm manager, press settings at bottom right and choose wifi. under power save tab try avoid adjusting to best battery. see if it solves your problem. if not u might having a faulty wifi kaiser. im using 6.5 so i might slightly different than yours. hope this help good luck

adamekkp said:
Hello everyone, im new here also im new user of this big machine -Tytn II
From begining my jurney with it i notices that My wifi dont work, on settings i see option to run WIFI, but when i try Start it on commmgr its trying but its go back to off mode.
I tryied put upgrade on my 6.1 WM but its still the same, later i tryied use some registry tweaks but the same.
Ive serched whole internet for solution of it, PLEASE help me.. im loosing my hope ;/
Hope that i poste it on good place.
Sorry for mess, cant wait for answers!
Regards ADAM
Click to expand...
Click to collapse
Install an official HTC ROM. Then disable power save in wifi settings. Turn wifi on and try scanning for networks.
Try changing Radio version as well. I recommend 1.65 or higher

Ok, ive been changing power mode before. after playing with registry i cant go to advanced options of wifi.. only white screen.
Can i have download url? and in shortlist what to do step by step. Beocuse i dont want to mess it again ;/

BUMP
also got problems with batteries, gone sleep with 50% and after 7 hours, i heard alarm and phone fall down. - new soft can fix it ? or its just battery?

adamekkp said:
BUMP
also got problems with batteries, gone sleep with 50% and after 7 hours, i heard alarm and phone fall down. - new soft can fix it ? or its just battery?
Click to expand...
Click to collapse
The problem is that Kaiser uses 3G which uses lots of energy. In WM 6.5 there's option in Comm Manager to turn off 3G (I can't find anything similar in WM 6.1). The internet connection will be slower, but the battery performance will slightly increase.

help me guys, i cant run setup when i use D-pad.
I want to instal android to check wifi etc.
can i have Yours solution ;/

ive instaled android hero from sdcard. but wifi still not working, the same with bt, when on WM bt was working, dunno maybe wifi is hardware problem ;/

Have you checked the rear panel of the phone where the antenna is?
check the pins they could be bent of broken off
Just a thought

They'r looking good

Related

Gigabyte gsmart i300 running WM6 eng

yup Windows Mobile 6 pro is running on the i300 the (free upgrade from gigabyte)
http://www.gigabytecm.com/Turkey/WM6/
http://www.gigabytecm.com/turkey/WM6/download/GSmarti300_V2.02.04_ENG-Turkey.zip
so far so good
Working good the update?
No problems at al?
one thing i noticed of the bat was MS active sync program is slow.... i guess they have to fix it up, when its doing the sync its taking a lot longer, and if it doesnt work with outlook, i found the fix and this was for wm5 and wm6 is that in outlook if you download all your mail and then hit the sync button, in outlook it will then work with active sync, its a known issue i think with some older outlook ver :/
but ya right now with wm6 it lags a bit in the connection activation, i think as far as the speed its the same speed as before, its just annoying, i might try the active sync beta that is out
the os seems more responsive, i have yet to test the gps and wifi or IE
I can get working GPS
SiRFDemoPPC.zip dl that from the manu run it until u get signal if not, in settup switch to binary mode and do a col reset or reset manu settings then switch back to nmea, it can take a while, play around with it, i know that if i can get a lock with that program then i can get lock with others after i exit this one
oh the device on i300 is GSW3
Hi, just a few questions.....is the I300 as a phone any good?....is the call quality on both ends clear etc?.....and also the back speaker, is it loud?.....i am looking at getting this phone but i would like to know the above first if anyone can answer these questions for me......also does anyone know the correct gps settings to get tomtom 6 to work?.......thanks in advance!!!
Cheers
irv777
as far as quality i think its same as any other phone quality... no diff from my other phone, (moto v300) the speaker is a loud speaker ya you can play games or mp3s etc... and its loud enough IMO, but there is only so much volume and quality of something of that size, regardless of phone IMO unless a phone has stereo, but this and most phones is mono 1 speaker, the headset is stereo and BT can be stereo too
Thanks for the reply, what about tomtom 6?.....does it work with this phone and what are the ps settings to get a proper fix?.......thanks again in advance.
i havent tried tomtom6 but some ppl have i believe on this device, IMO should work just fine
http://www.gsmarena.com/gigabyte_g_smart_i300-1817.php
yeah i was just reading some reviews on it from the gsmarena website.....how are you finding the battery life though?......is battery life better with WM6 or WM5, any differences?....thanks
well i really want the 1300mah battery, but i havent been able to see one, maybe they will release one later, or some other third party will
wm6 i think might give better battery life but mostly on idle or low activity, if you run anything intensive then i dont think there is anything that will save your battery hehe the charging seems faster or it could be just me
and for the rest i think you have to get some nice tweaking util to really optimize any PPC, i for one havent bothered much... everything is installed on my miniSD card
i think since its a free upgrade its quite worth it, all the small changes to all the apps is big
i cant really say a whole lot for wm5 vs wm6 becaues i havent been using either one long enough, some other vets could have a diff opinion im sure
i think its sad that any PPC if you use anything like Wifi, GPS or if you had a TV it kills the battery life very quick... same for if you try to run something that takes up all the resources (cpu) it does about the same... i was playing the sega emu and it did drain battery life but not as bad as wifi, gps does, mp3 playback takes even less cpu, as far as movies i dont know but i think it would be a little more then mp3 depending what its encoded i think
but for movies i can use my cowon D2 PMP
btw my i300 came with 2x 900mah batteries i dont know about others but most ppl said so, those that they got from ebay
could anyone export the i300WM6 registry and post it here, please?
GPS icon in settings > connections
I have enabled GPS icon in settings > connections. Programs now can not use built in GPS. Could you please post the registry keys and values in the following location:
HKLM\Control Panel\Gps Settings\
Thanks.
How do I get the voicemail indicator to work on my Gigabyte i300? I am using ATT and it doesn't ever tell me about new voicemails nor waiting voicemails.
balikci said:
I have enabled GPS icon in settings > connections. Programs now can not use built in GPS. Could you please post the registry keys and values in the following location:
HKLM\Control Panel\Gps Settings\
Thanks.
Click to expand...
Click to collapse
Sorry balikci, just saw your post today.
I did not upgrade my i300 (so, English WM5 firmware so far).
There is not such an entry (HKLM\Control panel\GPS Settings\) in my registry file!
GPS is not working with Wm6 firmware version?
GPS works perfectly fine in wm6, also the think outside ultra slim BT keyboard does work with this device you need 4.52 driver i think and disable the standard devices hid driver or so... its a check box when you run it for the first time, and then it works just right
I300 seems to have over exposure issue with the camera in wm5 and wm6, in very bright sunny area, after the first picture all pics are over exposed, if you close the app and start the first picture works perfectly but others that fallow do not... it must be a driver/software issue
could somebody help me with taking device into bootloader mode? i want to upgrade to WM6
in it's official website , it says you need to push Send End and power key , while the device is off.
first , what is send and end keys? green and red ones?
second , which one is power key? the suspend key or the soft reset hole key?
third , what does it mean by turning device off ? suspend it or turn it off completely , if so how?
and , is this ROM
http://www.gigabytecm.com/Eng/gbc_supportdetail.aspx?sid=26
WWE , i heard there are certain parts non english , which is okey , but if you know of any full WWE link , please let me know
cheers
king_dani, Send (green) is what you use to aswer a call, End (red) is what you press to end a call. Power key's the suspend key. Turning device off means turning it off compleatly, just hold the power key to turn the device off. The rom you gave the link to is WWE.
datdat said:
king_dani, Send (green) is what you use to aswer a call, End (red) is what you press to end a call. Power key's the suspend key. Turning device off means turning it off compleatly, just hold the power key to turn the device off. The rom you gave the link to is WWE.
Click to expand...
Click to collapse
thnx alot man , so at least i know i'm pushing the right keys. well i tried these combination , in completely shut down device , still, it turns on and won't go into bootloader mode , for some yet unknown reason. plus , do you know if i should empty the whole card ? or can i use a partially loaded miniSD card? i mean , would it work if there are other files on it , and also , should they files be on root folder?
cheers
try another combination: turn the device on, hold Send and End keys, do a soft reset (don't release send and end buttons!), wait for Image Utility. All files from a downloaded archive should be placed in a root folder (/Storage card). It's Ok if there're files on a card.

Wizard turns on without any reason

Hello,
I have Wizard + WM6 (faria) and recently I noticed that my PDA turns on without any good reason. Previously the display turned on when I received SMS or when there was an incoming call. Needless to say it drives me crazy!!!
Is there any way to investigate the issue (find a reason for this strange behavior)? Pls help.
P.S. Locking the device is not a solution.
Hikari said:
Hello,
I have Wizard + WM6 (faria) and recently I noticed that my PDA turns on without any good reason. Previously the display turned on when I received SMS or when there was an incoming call. Needless to say it drives me crazy!!!
Is there any way to investigate the issue (find a reason for this strange behavior)? Pls help.
P.S. Locking the device is not a solution.
Click to expand...
Click to collapse
i noticed that before and solved but i cant remember where is the problem exactly.
i think there is something with the connections or something like that
if it happened every short-time try to turn on flight mode, then check if it gone will be sure it is something with connection/phone
its right said:
i noticed that before and solved but i cant remember where is the problem exactly.
i think there is something with the connections or something like that
if it happened every short-time try to turn on flight mode, then check if it gone will be sure it is something with connection/phone
Click to expand...
Click to collapse
I had this problem with the 1413 build, but not since going to the new 318 setup.
mattk_r said:
I had this problem with the 1413 build, but not since going to the new 318 setup.
Click to expand...
Click to collapse
Where I can download it from???
Hikari said:
Where I can download it from???
Click to expand...
Click to collapse
there many roms now build on 318
have a look and you will see
its right said:
there many roms now build on 318
have a look and you will see
Click to expand...
Click to collapse
Hmmm but my rom is 5.2.318 (build 15341.4.0.01)
I tracked that down as being a problem with radio signal strength. Every time the radio signal strength changed it would wake up the phone. That was annoying, but I never found a fix for it since I upgraded to a different to a different ROM that doesn't have that problem. It may have been a problem caused by BatteryStatus's signal strength monitor though rather than the ROM's because it didn't start until I installed BS if I remeber right.
just lock the phone
before put the wizard in sleep mode. then it doesn't wake up when you dont neeD it
Hikari said:
Hello,
I have Wizard + WM6 (faria) and recently I noticed that my PDA turns on without any good reason. Previously the display turned on when I received SMS or when there was an incoming call. Needless to say it drives me crazy!!!
Is there any way to investigate the issue (find a reason for this strange behavior)? Pls help.
P.S. Locking the device is not a solution.
Click to expand...
Click to collapse
don't use a windows mobile password in WM6 (start -> settings -> lock). for mee it makes the phone wake up often. if I remove the password it doesnt wake up automaticly any more
hmm
maybe theres a ghost inside your wizard loll
I had a ghost in my wizard once, had it exorcised, and then it moved into my car. Now my car starts on its own!
Indeed I have a password. Furthermore I noticed that at the outset (WM6 + all software I'm using) the problem didn't exist at all. I think that it started after hard reset + system restore (spb backup).
I did some hard reset, but unfortunately the problem still exist (at least I think so, but today I will check it more thoroughly) HELP!
Here's what I would do if I wanted to keep my current rom - assuming it didn't have this behavior before (I've been known to be excessive at times ):
Back up your phone with something like PIM Backup or whatever you prefer - don't forget your themes, pictures, whatever.
Do a hard-reset.
Test for this symptom before installing any applications.
If the symptoms exist, try a different radio, if not, install BatteryStatus and test again.
Continue until you find the culprit.
Might take a while, but you should be able to find the issue...
its right said:
i noticed that before and solved but i cant remember where is the problem exactly.
Click to expand...
Click to collapse
I don't need to know the reason - I just need a solution?
BTW which one is the best WM6 ROM for wizard now?
The problem lies on having a both a password set and backlight settings on. Either remove the password or turn off the "turn off backlight if device unused for..." setting. It solved the problem for me!
You're right, but unfortunately I need the password :/
This weekend I switched to NBD 7.2 and the problem still exist.
Hikari said:
You're right, but unfortunately I need the password :/
This weekend I switched to NBD 7.2 and the problem still exist.
Click to expand...
Click to collapse
If you need a password, then you'll have to go back to WM5. If you just want a password because you want to protect some files, then you should look into encrypting those files.
I hope that there is some way/there will be some rom to support device lock for Wizard's WM6
some WM6 roms seem to work with password.
I am still on a 'old' rom Wizard Reloaded 1.5 and there I can enable the password without waking up problems.
Just try with any rom, if it wakes up, remove the password. I suppose that's not such a big problem for most of us...you can still use Mobile Justice
I hope someone will find the exact cause (regkey probably) of this waking up problem, so any further roms wont have the problem anymore...

please help

Hi
My first post and my first wm device so please bear with me...
just two questions: speaker volume...searched, seen all the threads, can somebody simply say is there a way to turn it up permanently, not to be lost after soft reset, and if permanently, how?
second, i got my tp but instead of a globe on tf3d in internet tab, there is an ad, or branding of some shop...pissing me off..how to get the globe? dont want to flash rom.
thank you very much...
oh, and cingular radio, much better 3g and hsdpa for me then stock...for those in europe
re
oh, and one more...
is there a way to have tp ask you what to connect to?
so you can pick 3g or wifi, also is there a way to auto disconnect from 3g data after, say updating weather?
thanks again
1. no idea sorry, but it is not that hard to press volume up 5 times to the max... but mine stays at the same level after soft reset
2. you need diamond touchflo 3d config http://forum.xda-developers.com/showpost.php?p=2373839&postcount=1
3. if you are connected via wifi, it will choose wifi over 3g... if i remember correctly, you can use advance config tool to auto disconnect 3g after certain time
thanks man...
tf config worked...
oh and volume, it is too quiet when i do max it, i saw dome db limitations can be removed, and asked hof if anybody knows...
thanks
for the volume, see if this thread helps
http://forum.xda-developers.com/showthread.php?t=420964
diamondtweak
http://forum.xda-developers.com/showthread.php?t=409540
I seem to recall that the removal of the 100dB limiter doesn't work on the Raph at the moment

WIFI problem need help!

Balur said:
Hey guys, I've been having a problem with the wifi on my universal for awhile, it just won't turn on, antenna stays off, no scanning, it's just off.
Going into the Wireless lan settings in the control panel "Wireless LAN OFF" is displayed, click "Turn on WLAN" it thinks for a few moments then returns to off with nothing changed.
Does anyone know if this is fixable? It doesn't appera to be a software issue, as it has continued on 3 diffreent ROMs... so i'm not sure how to proceed
Click to expand...
Click to collapse
hi @ all
this tread is a bit "past" but now i got the problem mentioned by balur.
i actually use maxstegis rom(5.2), but i also tried it with te shipped one from t-mobile.
i used google and the forum search, but i was not able to find a solution. i hope smb. can help me, because i need the wifi tomorrow!
1) Perhaps some of these ROMs are based on others that have the same problem.
solution: choose another ROM. Tomal8.2, minhanhtran, nncuong are ROMs that I vouch for that work on my maching with no WIFI problems
2) Perhaps your radio is not good
solution: try flashing another radio. I use 1.18, but many say 1.15 is the most stable. I have had problems with neither - but it may be worth reflashing your radio to make sure it is ok and stable.
Personally, I think if your original t-mobile ROM doesn't work, then you have problems with phone hardware. First I'd check other things can connect to you WLAN, to make sure it's definately the phone that's not good - or perhaps try and connect to a friends WLAN.
JonMorgan said:
2) Perhaps your radio is not good
solution: try flashing another radio. I use 1.18, but many say 1.15 is the most stable. I have had problems with neither - but it may be worth reflashing your radio to make sure it is ok and stable.
Click to expand...
Click to collapse
i tried both but no one solves the problem.
JonMorgan said:
Personally, I think if your original t-mobile ROM doesn't work, then you have problems with phone hardware.
Click to expand...
Click to collapse
i hope not. is there probably a tty command? when i had prolems with flashing my rom this helped
JonMorgan said:
First I'd check other things can connect to you WLAN, to make sure it's definately the phone that's not good - or perhaps try and connect to a friends WLAN.
Click to expand...
Click to collapse
how can connect to a friends wlan? Quote(Balur): "returns to off with nothing changed." i cant even turn it on!
but thanks for your help!!!
I've the same problem with Tomal's 8.2. An other rooms I've tried.
The only thing I did was to change my 2Gb SD to a 4Gb HDSD
I experienced automatical turning off WiFi on Tomal 8.2 when i installed some tweaks - one to edit system settings and speed up Uni, second to disallow applications turn on GPRS - only manual turn on.
I'm not sure which of them was causing it .... don't you have something like that installed?
I'll try to find exact names of them when I'll have a while ...
Yes I had the XCPU Scalar. But now, even if I install an Original Shipped ROM, I can't turn on the wifi. I think that something is swiched off permanently, but I don't know what nor how.

[Ask Your Questions Here] Questions & Answers for Magician Users

I have decided to open a Questions and Answers thread on this section of the forum. This is a good way to keep the number of new threads with questions down to a minimum, which will make new threads essentially for people that are contributing to the Magician. This includes, but is not limited to, people that are providing the following:
- Roms & Kitchens
- Programs & Apps
- Fixes & Tweaks
- Skins & Themes
- Tips & Tricks
I would like to request the help from other members to keep the thread in order and in check. This will have the added side effect of creating an ever self updating knowledge base that will far extend the content of the Wiki. This will in turn save us from having to answer the same question a billion times...
Please refer to the Wiki first before asking any questions though! It can be located here: http://forum.xda-developers.com/wiki/index.php?title=HTC_Magician
Hi all,
I have a seriuos problem with my htc magician s100. I first had WM2003SE installed on it and it kept restarting for no reason, then I upgraded it to Cotulla's WWE 3.03 and it still keeps restarting for no reason. Anyone had or has this problem? Any help would be appreciated.
Thanks in advance
i also have a problem with my qtek s100 there is no gsm i cant call plz help me
xharoonx said:
i also have a problem with my qtek s100 there is no gsm i cant call plz help me
Click to expand...
Click to collapse
you'd better use SummaryUtilitySP2 to solve connection problems
Anyone? :-(
please give me battery port pinout.
thanks.
tehb13 said:
please give me battery port pinout.
thanks.
Click to expand...
Click to collapse
you can look at http://pinouts.ru/PDA/qtek_power_pinout.shtml...
hi
i'm kind of new in this forum,
would you mind to tell me is there any UI we can install to magician?
i ever using manilla 2D but it has spent alot of memories
i was using WM 6.1 by cotulla(tx a lot cotulla)
n i don't have any credit card,can u tell me any other way so i will be able to donate in this forum.
tx
don't use manilla 2D you can ues SPB mobile shell 3.7
No need of credit.
Guys, I've updated my O2 Mini to HTCMAG_ROM_WWE_O5...
But now I can't synchronize to outlook, it seems that active sync can't recognize the device... Any workaround about this?
Thanks
alen_ws said:
Hi all,
I have a seriuos problem with my htc magician s100. I first had WM2003SE installed on it and it kept restarting for no reason, then I upgraded it to Cotulla's WWE 3.03 and it still keeps restarting for no reason. Anyone had or has this problem? Any help would be appreciated.
Thanks in advance
Click to expand...
Click to collapse
i think it's because magician battries is suck! i had the same problem,but maybe you can use:advanced configuration tools,juice defender,or maybe battrey guard
galuh said:
i think it's because magician battries is suck! i had the same problem,but maybe you can use:advanced configuration tools,juice defender,or maybe battrey guard
Click to expand...
Click to collapse
No, usually the rebooting-by-itself problem on the Magician is caused by loosed contact on the back cover, you need to put a small piece of paper in order to prevent the device from rebooting alone.
Use activ sync 4.5
hallo... I just took my magician out again... it's not working since 4 years ago, when I, as a terrible dumb man, made it poweroff while installing a radio upgrade.. now all I get is the boot screen and in few seconds it goes to black screen and USB 2.0 (or something similar) on the lower side of the screen... is there anything i can do to make it live again?
Hi everyone, can someone please advise me on the smallest/fastest most naked rom for the Magician?
I used to have a Russian rom which I set to English and this when fully tweaked gave me 42Mb of free ram and I used this for some time (mainly as a backup sat nav)
Anyway over the years I saw the newer roms and decided to try them but the best I can achieve now is around 32Mb free.
I don't care which rom or even if office etc have been removed I just need a really striped down naked rom for my 64Mb Magician.
Anyone please, and I have tried to look but there is sooo many pages and I have tried quite a few Cotula roms.
Sound Off Problem
hello Sir, i have i-mate Jam WM5
i have sound off problem, after 2 or 3 hours sounds will automatically gone off, and then no player play the song, and no ring tones rings for call or msgs, then i reboot it but after 2 or 3 hours, i create the same problem, plz tell me any solution
nadeem8403 said:
hello Sir, i have i-mate Jam WM5
i have sound off problem, after 2 or 3 hours sounds will automatically gone off, and then no player play the song, and no ring tones rings for call or msgs, then i reboot it but after 2 or 3 hours, i create the same problem, plz tell me any solution
Click to expand...
Click to collapse
should tried hard reset device to factor default settings your Pocket PC Phone by Press and hold the power button, and then use the stylus to press the soft reset button at the same time
O2 XDA II Mini not turning on.
Hi guys.
Some time ago i tryed to unlock my device, but the software i used made it stop turning on.
Now wen i press the power buton little blue light flashes for a second, and the light above the display also flashes a blue light for a second.
When i connect it to usb or or the charger, its always flashing light from the display, but the little light above it flashes in red.
Can anyone tell me if there is any way i can make it work again ?
Keep up the good work
need rom for s110
Please can anyeone provide working link with rom fo magician maybe 6.1 thanks

Categories

Resources