Database Info

Screen Disalign? Read this!

Hello to all!
After I've upgraded my Magician to 1.13 I recognized my screen disaligns after 5 minutes of use. The I've downgraded to 1.12, but the disalign still stays. After browsing the forum I've recognized that much people have the same problem too. Some guy says that you should downgrade your ROM, or take the unit to the HTC European Service (if you have guarantee).
After browsing in the registry, I've found a regkey about Calibration. I modified it, and now the machine runs good, without disaligning.
So the method is the next:
1. Open your favourite Regeditor (Resco, Total Commander etc.)
2. Open HKLM/HARDWARE/DEVICEMAP/TOUCH/
3. Open CalibrationData You will see coordinates.
- The first coordinate is always x coordinate, so that is the horizontal
- The second coordinate is alwasy the y coordinate, so that is the vertical
- The first number pair (ex.: x,y) is the center point
- The second one is the upper left
- The third one is the bottom left
- The fourth is the bottom right
- and the last one is the upper right
My screen calibration is:
474,498 814,773 814,228 119,228 119,773
I hope it will help to guys who has the same problem.
If someone finds better calibrate coordinates, pls post it.
Cheers,

cheers for this , I have the same problem and have tried many different tweaks with no result.
My co-ordinates were different but then I was getting a mis-alignment problem I will give your co-ordinates a go and report back.

mine has no issue or whatsoever. working fine since...
my coordinates are:
502,498,862,771 859,223 138,229
hope this helps...

Never got no problems with it.
Coordinates are:
499,503 861,774 856, 231 148,223 142, 773

What a great discovery
Mine is a HTC Charmer (MDA Compact 2) on WM5. My data is very different
1928, 1960 3308, 617 3296, 3316
(WARNING! THIS IS NOT Magician configuration!)

can u tell me more in details pls coz i have the same problem. I must align the Screen oftenly
u wrote : Open your favourite Regeditor (Resco, Total Commander etc.)
Where can i fin this programme ?
pls help. Tks

i found the total comander and do wat exactly wat u say.
But the my problem doesnt solve

calibration data 2020i alpine
i have resive one devise with problems in alighn screen first my thought was that the problem was at rom and the extrom that was missing after lot of trying and with resco registry i found that the calibration data was missing pls pls if any one can help me by posting the coordinates of that device QTEK 2020i

Why don't you ask in the matching topic?

hey guys can you make a permanent fix for the disalignment bug of xda mini?
i have this problem...but i got a solution on this topic,but the problem is when you hardreset the ppc its going back again the problem unless you tweak it again in regeditor...
can the rom developers include this tweak for the upcoming cook rom for xda mini so that the screen disalignment can be fix...
thanks

to HyperMalac:
so, the solution is to change the coordinates with yours?? hmmm ok i will try it.. i (and my friend here) have the same problem. i thought this is LCD problem and cannot be fixed unless u change the lcd (as 1 of the member said) thx~! i'll let you know~!

not working
i have to constantly align my screen and even putting in the coordinates..it still doesn't work. I will be sending it back to the repair centre sooon.

dear all,
I want to ask how to open the registry in the WM2003?
I've installed the Total Commander, but after that I still confused what to do next.
many thanks

Open TC and open the "folder" named: \\. this \\ folder contains the registry...

NEWS:
Finally I've took my Magician to the HTC Europe Service Center...Waiting, for solution....Will post the result
Cheers

hypermalac....
so the reconfiguration in registry do not solve the screen missalignment problem? Coz I've try, but it seems no result, only the frequent of screen become missalign is decrease...
any solution for this?

Well, the registry modding, only reduced the misaligns, for me too. I saw somewhere on this forum that this problem is hardware problem, but I don't think so. Someone said, that the touchscreen has a factory malfunction. Anyway I'd took it to the service, an as soon as I get it back, I will post, if it's solved the problem, or not.
Cheers

@HyperMalac:
well, when u get ur mini back from service centre, ofcourse it will be fixed, no more sreen disaligned, for sure..
now, the problem is, why this happend to many people (from different countries) ?? can you ask the service center while they keep your mini : what is wrong with xda2 mini lcd?? why this disaligment happend? how can we avoid this?? how to fix (without send back to factory) etc etc.. please ask, if possible, ofcoz... thx alot
FYI, this is not the only problem that many xda2mini from difference countries get. other problem is after take the battery out for only 5 secs, you will get HARD reset. the backup battery is not functioning~! happend to me~! then sent mine to factory, they fix it but strangely, they change the MOTHERBOARD~!
ah, i think someting is wrong with HTC.....

erwinsie said:
@HyperMalac:
well, when u get ur mini back from service centre, ofcourse it will be fixed, no more sreen disaligned, for sure..
now, the problem is, why this happend to many people (from different countries) ?? can you ask the service center while they keep your mini : what is wrong with xda2 mini lcd?? why this disaligment happend? how can we avoid this?? how to fix (without send back to factory) etc etc.. please ask, if possible, ofcoz... thx alot
FYI, this is not the only problem that many xda2mini from difference countries get. other problem is after take the battery out for only 5 secs, you will get HARD reset. the backup battery is not functioning~! happend to me~! then sent mine to factory, they fix it but strangely, they change the MOTHERBOARD~!
ah, i think someting is wrong with HTC.....
Click to expand...
Click to collapse
Well, when I get it back, I'll ask your questions, if it's possible, and I hope too that the service give some solution for us, to avoid this problem (screen misalignment), without taking our magician to service.
Battery problem:
Changed the motherboard???Do you mean the hardware buttons?
Well, my magician works fine expect the sreen, so I haven't got any batt problem. But I will ask it too.
Cheers

Hardware Issue
Pretty sure this IS a hardware issue. Happened on my MDA Compact and got progressively worse.
No amount of hard resets, software configuration and ROM upgrades fixed it.
Came back from HTC good as new.
I have heard that using screen protectors causes this as it is touching the screen all the time.
I no longer use a screen protector so I'll let you know next year if the problem has come back again!

Wifi problems, no FM Radio & sometimes no soft-reset

Dear readers,
I have some problems with my Polaris.
I'm running the original 6.0 rom.
The problem is this:
Sometimes the wifi stops or won't go on at all!
FM Radio won't work, i start the fm tuner, plug in my headphones and it does nothing. I try to get a predifined station but it does nothing!
The blue led on the left top 'flickers', it doesnt blink like the normal status, but it really 'flickers'.
Sometimes i can't soft reset it, it stay's black and removing the battery for few seconds and then pushing the on button is the only solution
Of course i have hard-resetted the device multiple times (you know, format) so add-on software could'nt be the problem.
And, fm radio worked in the beginning, as wel as wifi . it all happend the last month or so.
I only have the device for about 2 months! Can someone give me some help about what to do? Of course i have insurance on the device, but i hope not to use that because then the device would be gone for weeks. (the service of the dealer i bought it from isn't that good...)
Thanx in advance! Any help is wanted!

send in the device or look at the cooked roms. they might solve some problems.

Pawel062 said:
send in the device or look at the cooked roms. they might solve some problems.
Click to expand...
Click to collapse
"Send in the device"
What do you mean, send it back to the shop i bought it from?

question for all universal experts

I bought a used universal three months agn universal was wm6.1 rom but universal freezes and i have about a 10 resets per day,i tray to change rom and radio rom to some of wm6 but still device work very unstable,universal just freezes and when i reset he works normaly even i tray to flash wm2005 rom but i have same problem,i begining to think that problem on my universal is hardware is that posible,do anybody have eny solution or opinion on my problem,maybe i have to install some fabrick rom or somethung like that please help i just want to my universal work properly and i want to dont have a 10 even a 20 resets per day,help!!!

It seems hardware problems maybe the battery, try another bat...

i already buy a new battery and he works good for 2days without crash but then same story,freeze

Could Be Hardware Or Software.
Could Be A Software Issue.
What Rom Are You Using And What Software?
HTC Home Is Known To Cause Lagging/Freezing On The Universal I Believe.
Also OverClocking G3 Devices Can Prove Unstable, Some Roms Enable Overclocking By Default.
Regards,
OllieD

krle92 said:
i alerady buy a new battery and he works good for 2days without crash but then same story,freeze
Click to expand...
Click to collapse
What rom are you trying? Are you installing something else in it? what's your cpu speed 624 or 520?

i tray ranju,Jwrightmcps,PDAViet,Beasty & Laurentius now i am testing KDSkamal WM5 Ultimate edition,on some there was option to overlock but i try dont to use them and when i am test i dont use htc home or same programs but phone freeze

when i buy new battery i use that and old battery sometimes, maybe its have something because i use that old battery

krle92 said:
when i buy new battery i use that and old battery sometimes, maybe its have something because i use that old battery
Click to expand...
Click to collapse
I don't think so. Just one question your Uni freezes no matter what, or only when you power on? (turn on the screen)

uni works normaly during the work on it but when i put backlight of or stand by and try to turn on he freeze,or do not come back from stand by and have to reset.Or sometime when i do not turn backlight of ,he just stay turned on for 10min and when i tap screen he freeze,i also have a few freeze during the work on it

but that freeze during work are rare i can sey that they are normaly but real problem is from stand by

That happens to me, but it was the HTC Home plugin.
Try again Ranju's - v7.6, remove SD card, and don't put anything (contact's, etc) or install anything on it!! Sim card only and test it for a while...

thanks i will try later because i nom test some wm2005 rom and it seems that work good but i will see in a few days also i will try ranju,i can see on forum that he is one of the best

IE problem
how to not make any ie(internet Explorer) page pooling in my program memory

loiz said:
That happens to me, but it was the HTC Home plugin.
Try again Ranju's - v7.6, remove SD card, and don't put anything (contact's, etc) or install anything on it!! Sim card only and test it for a while...
Click to expand...
Click to collapse
Many roms are settings "Performance applet" in 624MHZ. This is my problem in all roms, but setting "Performance applet" in 520MHZ solve my problem and not random freeezes and never reboots!
My english is very bad!

ROM is one thing to look but Radio is also something you need consider. if your reception pure then universal may freeze

i try diferent radio roms,now i use ranju 7.7rom and 1.15 radio and still i have 2-3 freeze on day and also 3-4 restarts

krle92 said:
i try diferent radio roms,now i use ranju 7.7rom and 1.15 radio and still i have 2-3 freeze on day and also 3-4 restarts
Click to expand...
Click to collapse
My advice would be to reset partitions, instructions are in the wiki.
After resetting with MTTY, flash the rom of your choice, but also flash the radio and a blank extended rom image, all at the same time.
If you still have problems after this, it could still be a battery issue, there are lots of bad batteries being sold on Ebay that do not provide enough power for all the devices functions, especially when using WM6 and Wm6.1 Roms.
Please reset with MMTY as above, and post back your results, if you are still having issues after this, charge the battery, and test with a full battery and powered device from the mains.
Cheers,
Beasty

can you give me link on wiki,or say how to reset partitions,does the reset do with commands like set 14 0,task 28 55aa and task 28 or with something other commands,please help sory if im borring,my english is bad can you explain how to test battery

can you please answer me the question

krle92 said:
can you give me link on wiki,or say how to reset partitions,does the reset do with commands like set 14 0,task 28 55aa and task 28 or with something other commands,please help sory if im borring,my english is bad can you explain how to test battery
Click to expand...
Click to collapse
Yes - the commands "task 28 55aa" should reset the partitions (via the MTTY tool)
As for testing your battery - you should get a couple of days and it should drain to about 5-15% before dying, if not check the wiki

WM6.5 "No service"

I've recently upgraded my O2 xda ii mini from WM2003 to Cotulla's WM6.5, and Radio 1.13
Everything's OK but except:
Whenever my battery drop down below 60%, it will display no signal at all, no service... And when click con Phone, Phone Setting, Sim Manager... It'll pop up: "The phone is not ready, wait 15 sec" => Then wait all day long with no result... (If I plug the charge, everything'll be fine)
I bought a new battery, and still not works...
And I don't know why, now, even the battery indicator gone mad... Always 0%, charging, when the phone running smoothly...
Sorry for my bad English.
How can I solve those problems now?

Hi,
are you sure you have radio 1.13?
So long,
MrFX

can you post some screenshots of Device Information and Phone Settings.? so that we can diagnose properly. . .

I don't know how to take a screenshot on my PDA, but I'll write it down...
Device Infomation:
ROM version: 3.06.00 WWE
ROM date: 25/12/09
Radio version: 1.13.00
Protocol version:1337.43
ExtROM version: <Nothing>
And Phone Setting:
Well, my network, I set to auto, not work, then I set to manual, but still can't solve...

Hi,
how the hell you've installed this rom with radio 1.13? If i tried this, there was a bad radio error...
Please try the radio 1.12 like described on cotullas site:
*You must have installed 1.12 or 3.00+ radio.
Click to expand...
Click to collapse
Best wishes,
MrFX

I've installed radio 1.13 first... Then install that ROM, and they're still work OK if battery is over 60%...
How do I down grade to 1.12? The 1.12 installer always said that the cable is disconnect...

MisterEffiks said:
Hi,
how the hell you've installed this rom with radio 1.13? If i tried this, there was a bad radio error...
Please try the radio 1.12 like described on cotullas site:
Best wishes,
MrFX
Click to expand...
Click to collapse
Well, I did downgrade to 1.12...
Still the same...

Hi,
is it an old or a new battery?
I had also some problems with my older bat, it shows always a good status, but i was not able (with full bat) to flash any new ROM to the Magician, and sometimes the Phone was going down.
After i replaced the battery with a new one, the Magician works very well.
So long,
MrFX

Sorry, both the old one and the new one brought no good result...

Hi,
do you have the same problem with WM 2003 (now)?
So long,
MrFX

MisterEffiks said:
Hi,
do you have the same problem with WM 2003 (now)?
So long,
MrFX
Click to expand...
Click to collapse
Ah yes... I think that's hardware problem
And another problem is:
Now my O2 will not sound anything out when receive a message or a phone call if PDA is off (it still vibrate though). If it's on, it sounds normally...
I don't know what the heck is going on... Everythings works fine before I flash the WM6.5 in... Even now I flash back to WM2003... It still screwed up...

are you sure you have downgraded to 1.12 wm2003se.?
if you still have that same problem, try to change network provider or change SIM, maybe you have a network bandwidth problem.
check the antenna pads if it's tightly intact, if there still no luck, you better find a technician.

ohh i forgot, the last time you upgraded your device did you use and run this file.? MaUpgradeUt_noID.exe if yes, then you should not be having problems with your network cause that file helps fix country id error.

Yes I did...
I tried another SIM from a different Provider, but no hope.
I cleaned the antenna, still the same.
Try a different battery. Nothing happen (still below 60% and no services).
Now, if some one call me or SMS, it has no sound at all, unless the PDA is turned on (that means the screen still show Windows menu, not black).
The Cotulla's WM6.5, the virtual keyboard: Sometimes the Delete or the Backspace key doesn't work at all, and I have to reboot.
If I press a hard button, it will show a message box said the short cut is invalid.
If I flash WM2003, then, I can't turn off the device by the side button. I must set it auto turn off after 1 min.
My country have no such technician for me to ask. Just a bunch of liars... ^^
May be it's too old, and I have to buy a new one.

BabyRaptor said:
Yes I did...
I tried another SIM from a different Provider, but no hope.
I cleaned the antenna, still the same.
Try a different battery. Nothing happen (still below 60% and no services).
Now, if some one call me or SMS, it has no sound at all, unless the PDA is turned on (that means the screen still show Windows menu, not black).
The Cotulla's WM6.5, the virtual keyboard: Sometimes the Delete or the Backspace key doesn't work at all, and I have to reboot.
If I press a hard button, it will show a message box said the short cut is invalid.
If I flash WM2003, then, I can't turn off the device by the side button. I must set it auto turn off after 1 min.
My country have no such technician for me to ask. Just a bunch of liars... ^^
May be it's too old, and I have to buy a new one.
Click to expand...
Click to collapse
before you buy a new one, do first an experiment so that we can corner the problem, you must downgrade to the original rom, just ignore the turn off button, i think it can be tweak in the registry.
follow this steps, this is my way of downgrading.
1.) download this rom http://files.pdamobiz.com/ROMs/XDA/Magician/MA_O2Asia_11200_920_11200_Ship.exe
2.) extract those files in a folder. (any folder name you like, use winrar.)
3.) run the file ROMUpgradeUt.exe
4.) download and save this file inside the folder where you extracted the files in step 1. http://files.pdamobiz.com/ROMs/XDA/Magician/MaUpgradeUt_noID.exe after you downloaded it, run it.
5.) follow the onscreen instruction until your done flashing.
observe your device if it still have the same problem.

I did try as you suggest...
The same problem... Nothing changed... And even still no sound when the PDA is "sleeping"...
I don't know what to do with this "thing" now...

BabyRaptor said:
I did try as you suggest...
The same problem... Nothing changed... And even still no sound when the PDA is "sleeping"...
I don't know what to do with this "thing" now...
Click to expand...
Click to collapse
maybe you have a hardware problem. let them check by a technician. cotulla's rom works fine on my device. no problem encountered so far.

[q] [wifi][wlan] tytn ii

Hello everyone, im new here also im new user of this big machine -Tytn II
From begining my jurney with it i notices that My wifi dont work, on settings i see option to run WIFI, but when i try Start it on commmgr its trying but its go back to off mode.
I tryied put upgrade on my 6.1 WM but its still the same, later i tryied use some registry tweaks but the same.
Ive serched whole internet for solution of it, PLEASE help me.. im loosing my hope ;/
Hope that i poste it on good place.
Sorry for mess, cant wait for answers!
Regards ADAM

to ensure, see your wifi's power save mode. go to comm manager, press settings at bottom right and choose wifi. under power save tab try avoid adjusting to best battery. see if it solves your problem. if not u might having a faulty wifi kaiser. im using 6.5 so i might slightly different than yours. hope this help good luck

adamekkp said:
Hello everyone, im new here also im new user of this big machine -Tytn II
From begining my jurney with it i notices that My wifi dont work, on settings i see option to run WIFI, but when i try Start it on commmgr its trying but its go back to off mode.
I tryied put upgrade on my 6.1 WM but its still the same, later i tryied use some registry tweaks but the same.
Ive serched whole internet for solution of it, PLEASE help me.. im loosing my hope ;/
Hope that i poste it on good place.
Sorry for mess, cant wait for answers!
Regards ADAM
Click to expand...
Click to collapse
Install an official HTC ROM. Then disable power save in wifi settings. Turn wifi on and try scanning for networks.
Try changing Radio version as well. I recommend 1.65 or higher

Ok, ive been changing power mode before. after playing with registry i cant go to advanced options of wifi.. only white screen.
Can i have download url? and in shortlist what to do step by step. Beocuse i dont want to mess it again ;/

BUMP
also got problems with batteries, gone sleep with 50% and after 7 hours, i heard alarm and phone fall down. - new soft can fix it ? or its just battery?

adamekkp said:
BUMP
also got problems with batteries, gone sleep with 50% and after 7 hours, i heard alarm and phone fall down. - new soft can fix it ? or its just battery?
Click to expand...
Click to collapse
The problem is that Kaiser uses 3G which uses lots of energy. In WM 6.5 there's option in Comm Manager to turn off 3G (I can't find anything similar in WM 6.1). The internet connection will be slower, but the battery performance will slightly increase.

help me guys, i cant run setup when i use D-pad.
I want to instal android to check wifi etc.
can i have Yours solution ;/

ive instaled android hero from sdcard. but wifi still not working, the same with bt, when on WM bt was working, dunno maybe wifi is hardware problem ;/

Have you checked the rear panel of the phone where the antenna is?
check the pins they could be bent of broken off
Just a thought

They'r looking good