Database Info

usb internet connection

i have this problem with my qtek9000 and any idea for resolve it ,it happened only in usb and not in bluetooth mode , i have any firewall on my pc and xp firewall is disabled .
it is my rom now :Rom 2.10.02 WWE
RADIO 1.15.00
protocol version 42.51.p8

USB Internet
Did you check the box on your pc for internetsharing?
Or... what kind of o.s do you use?

duanes said:
Did you check the box on your pc for internetsharing?
Or... what kind of o.s do you use?
Click to expand...
Click to collapse
thank you for your replay , i'v giust resolved it , if we select ''enable advance network functionality'' will have this problem .

Try this:
Go to Settings> Connections> USB to PC
And, un-check
Enable advanced network funtionality.
Note: This will also give you a connection icon on the today screen, near the battery icon.
KOR™

King of Rapture™ said:
Enable advanced network funtionality.
Note: This will also give you a connection icon on the today screen, near the battery icon.
KOR™
Click to expand...
Click to collapse
i have just solved this problem unchecking Enable advanced network funtionality.
but couldn't underestand why i should enable it again and how and when it will be usefull for me .
This will also give you a connection icon on the today screen, near the battery icon. ??? now i'm realy confuse excuse me .

Hi Babak,
My Original Quote is to un-check this option:
King of Rapture™ said:
Try this:
Go to Settings> Connections> USB to PC
And, un-check
Enable advanced network functionality.
Note: This will also give you a connection icon on the today screen, near the battery icon.
KOR™
Click to expand...
Click to collapse

King of Rapture™ said:
Hi Babak,
My Original Quote is to un-check this option:
Click to expand...
Click to collapse
ok , thanks again

babak said:
This will also give you a connection icon on the today screen, near the battery icon. ???
Click to expand...
Click to collapse
Hi Babak,
When you sync your PPC through USB port via the Microsoft ActiveSync, it will show a sync connection icon at the lower right hand side on your screen of your PPC. At the bottom right hand side of your PPC. I am not sure, but I believe it is called the task bar.
You don't have to look now at the Microsoft ActiveSync to make sure if you are synced or not. If the icon is shown at your PPC, then your PPC ise properly synced with your PC.
Thanks again,
KOR™

Do it on your PC:
1- Click Start --> Run --> type "regedit"
2- Find on your registry brower HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows CE Services
3- Add a DWORD with name = "AllowLSP"
4- Set Default value = 0

Windows Mobile Device center (Vista) and Sync problem

Hello! It seems I have the first question with my XDA Exec…
It connects to the PC without problem and I can see it on Windows Explorer (Windows Vista). But synchronization (through Windows Mobile Center)… only completes on the first connection.
If I disconnect from the PC and connect again, most of the times the “Sync” begins but never ends. In these cases, the only solution has been to erase definitions (both on the PC as on the PDA); if so… the next time I connect it does not have the problem, but of course I have to define again what I want to synchronize.
Forgive me if there is already some forum on this issue, I looked for before placing but I did not find.
Some solution? Many thanks and regards from Portugal.

am also having the same problem .. any aid please ?

Same problem here too - device connects, charges, shows in explorer but when WMDC tries to connect the device continues to charge but drops out of explorer.
If I find a solution I'll report back here, meanwhile can anybody save me the heartache?
-sf

Vista Sync Problem
Which version of WMDC are you using?
I am using 6.1.6965 and having no problems. Alternatively, go to the network icon in your task bar after connecting your PPC thru USB and repair connection. This should resolve the problem

I had a similar problem, I reverted to 6.0.6783. Although come to think of it I think this was particular to an app I use, that refused to sync using the later version of WMDC.
Might be worth a try though.
Has anyone applied SP1 yet? What version of WMDC do you end up with?

I seem to remember unticking (and maybe reticking) the "Enable advanced network functionality" on the "USB to PC" applet on "System" tab of Settings.
Can't remember if that's what fixed it.

hey guys, the main problem if ur using an antivirus/internet security or firewall it will be blocked!!
u need to configure ur antivirus/internet security or firewall to allow and solve the sync problems

haardman said:
I seem to remember unticking (and maybe reticking) the "Enable advanced network functionality" on the "USB to PC" applet on "System" tab of Settings.
Can't remember if that's what fixed it.
Click to expand...
Click to collapse
This fixed it for me too, which is interesting given that the general advice is to *enable* it if there are problems syncing. This is definitely what fixed it for me - the device now always syncs on my recently reforatted XP machine whereas previously it was intermittent (which is odd because I'd never experienced problems before, but hey, it's fixed so I don't care any more)
-sf

--------------------------------------------------------------------------------
hey guys, the main problem if ur using an antivirus/internet security or firewall it will be blocked!!
u need to configure ur antivirus/internet security or firewall to allow and solve the sync problems
--------------------------------------------------------------------------------
ditto.... that solved it

Managed to solve the Problem
Hey there guys,
I seemed to be having the same problem anj just solved it...
1 Remove the Enable advanced network functionalty check from the USB to PC connection settings "Start > Settings > Connections > USB to PC".
2 Make sure that the Mobile Device is connected via USB to the PC.
3 Install Windows Mobile Device Center 6.1 (either 32bit or 64bit, I installed 64bit)
4 Open Control Panel on the PC and run Windows Mobile Device Center 6.1
5 At the bottom of the application you will see Mobile Device Settings, and within that you will see Connection Settings. Open the Connection Settings
6 Make sure that the second check box named Allow connections to one of the following is checked, and that the Drop Down below is changed to COM 1 (or which ever COM Port your Mobile Device is connected to via your USB cable) and save the changes
7 Disconnect the Mobile Device and Reconnect and hopefully it will work for you.
I realise that this solution might not work for some, but it did work for me, and hopefully it will work for others.
-----------------------------------------------------
Desktop
Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.4GHz
8gb RAM
Windows Vista Ultimate 64bit
Mobile
Keiser HTC TyTn II
Windows Mobile 6.1

haardman said:
I seem to remember unticking (and maybe reticking) the "Enable advanced network functionality" on the "USB to PC" applet on "System" tab of Settings.
Can't remember if that's what fixed it.
Click to expand...
Click to collapse
Thanks, this worked for me too, unchecked enable advanced network functionality... who woulda thought something advanced would be bad...

problems to Sync with Vista
Hi I followed the instructions but my htc didn't sync, it happens noting, no error, nothing, This happens after apdate my room with Golden Globe Manila2D - 21198/build 21198 Fast and Stable., it works great but sync is dead

osber2003 said:
Hi I followed the instructions but my htc didn't sync, it happens noting, no error, nothing, This happens after apdate my room with Golden Globe Manila2D - 21198/build 21198 Fast and Stable., it works great but sync is dead
Click to expand...
Click to collapse
Wrong forum mate
I understand that you do not own an HTC Universal (Universal not means all HTC devices!, it´s a model. One of the best by the way)

Sync Problem
1 Remove the Enable advanced network functionalty check from the USB to
PC connection settings "Start > Settings > Connections > USB to PC".
2 Make sure that the Mobile Device is connected via USB to the PC.
3 Install Windows Mobile Device Center 6.1 (either 32bit or 64bit, I installed
64bit)
4 Open Control Panel on the PC and run Windows Mobile Device Center 6.1
5 At the bottom of the application you will see Mobile Device Settings, and
within that you will see Connection Settings. Open the Connection Settings
6 Make sure that the second check box named Allow connections to one of
the following is checked, and that the Drop Down below is changed to COM
1 (or which ever COM Port your Mobile Device is connected to via your USB
cable) and save the changes
7 Disconnect the Mobile Device and Reconnect and hopefully it will work for
you.
I already done all the instruction, disable the firewall and antivirus, i also go to device manager too to update the driver/device, but still couldn't connect. Anyone can help me please.
using prophet wm5 upgrade wm6
vista home basic machine
f

haardman said:
I had a similar problem, I reverted to 6.0.6783. Although come to think of it I think this was particular to an app I use, that refused to sync using the later version of WMDC.
Might be worth a try though.
Has anyone applied SP1 yet? What version of WMDC do you end up with?
Click to expand...
Click to collapse
Hi yes i've applied SP1 and my current WMDC is version 6.1.6965 working without any problem......
Cheers
Rajiv

Sync with vista solved!!
Already solved my problem. Stupid me .

popshah said:
Already solved my problem. Stupid me .
Click to expand...
Click to collapse
Ohh Great news.... well enjoy than....

popshah said:
Already solved my problem. Stupid me .
Click to expand...
Click to collapse
How did you resolved the issue???? I have an Iolite which does not synch (connects only as a guest), keep getting the message "there is a problem with your connection........"
any help will be appreciated

Even this is a legacy thread there are some people out there (including me) still using Windows Mobile devices (but also using WP7 ...).
Had exactly the same problem and in my case just using another USB cable did it! It seems that WM devices are a bit "fragile" when using a not 100% perfect USB cable

Problem syncing with HTC Desktop Cradle

Hi,
Just bought the official cradle from HTC, plugged it into my PC, but it generally won't sync at all, or when it does it loses the connection again after a few minutes.
Most of the time, once connected, activesync will do nothing at all for about a minute, and then comes up with a dialog saying unable to connect
Also, the light around the touch sensitive button still illuminates to show that it's charging. So there's definitely a connection.
Any clues?

^bump
Can anyone help? I've added a bit more info which might help to diagnose.

I also got the original HTC desktop cradle and it works like a charm for me.
But what you could try is
Start -> Settings -> Tab Connections -> USB to PC and uncheck "Enable advanced network functionality".
This normally solves USB connection problems.
HTH

You're a genius! I could kiss you! XD

DeepThought said:
I also got the original HTC desktop cradle and it works like a charm for me.
But what you could try is
Start -> Settings -> Tab Connections -> USB to PC and uncheck "Enable advanced network functionality".
This normally solves USB connection problems.
HTH
Click to expand...
Click to collapse
Hi DeepThought, have you got an answer for "Windows Mobile Device Center" sync with HTC Pro? I have got vista x64 and it won't sync with MS Outlook

GaZ said:
You're a genius! I could kiss you! XD
Click to expand...
Click to collapse
I'm glad I could help, but please leave it at a hug!
(except if you are the new bond girl )
Cyber-mate said:
Hi DeepThought, have you got an answer for "Windows Mobile Device Center" sync with HTC Pro? I have got vista x64 and it won't sync with MS Outlook
Click to expand...
Click to collapse
Hi!
It just doesn't want to sync with outlook or it does not want to connect at all? If it doesn't want to connect at all: have you tried changing the setting above?

DeepThought said:
I'm glad I could help, but please leave it at a hug!
(except if you are the new bond girl )
Hi!
It just doesn't want to sync with outlook or it does not want to connect at all? If it doesn't want to connect at all: have you tried changing the setting above?
Click to expand...
Click to collapse
It connects & I could explore except that when I select device setup or sync, there when it triggers the error!

Cyber-mate said:
It connects & I could explore except that when I select device setup or sync, there when it triggers the error!
Click to expand...
Click to collapse
You could try to delete the WMDC Partnership when your TP is not connected and than reconnecting your phone. It should as you for a new partnership then and also give you the possibility so sync it with outlook.

Sprint Touch Pro2 w/ Mighty ROM LOVE (2/24/10) - WMDC (Win 7) ISSUE!!!

My cell phone won't connect to Windows Mobile Device Connection after flashing my ROM.
I just installed Mighty ROM LOVE (2/24/10) on my Sprint Touch Pro2. Next, I executed "Carrier Provisioning" with the Sprint parameter. Then I went to Settings -> Connections -> USB to PC -> and I
unchecked "Enable faster data synchronization."
I'm running Windows 7 and have installed "Windows Mobile Device Center 6.1 Update."
Since I can't connect to WMDC, I can't seem to do ANYTHING that involves connecting my phone to my laptop.
PLEASE HELP! I feel like I just bricked my phone. What are my options? Any hope will be greatly appreciated!

mogul111 said:
My cell phone won't connect to Windows Mobile Device Connection after flashing my ROM.
I just installed Mighty ROM LOVE (2/24/10) on my Sprint Touch Pro2. Next, I executed "Carrier Provisioning" with the Sprint parameter. Then I went to Settings -> Connections -> USB to PC -> and I
unchecked "Enable faster data synchronization."
I'm running Windows 7 and have installed "Windows Mobile Device Center 6.1 Update."
Since I can't connect to WMDC, I can't seem to do ANYTHING that involves connecting my phone to my laptop.
PLEASE HELP! I feel like I just bricked my phone. What are my options? Any hope will be greatly appreciated!
Click to expand...
Click to collapse
I would first just reboot your laptop and soft-reset your phone. If that doesn't work, recheck "Enable faster data synchronization". If that still doesn't help, you may need to do a hard-reset. Good luck!

Impact and love have problems resumeing from sleep ocasionaly and the camera messes up on impact ocasionaly

i went to nagrom. stripped down to basics. and just add what i need and the rom flies...

LinearBurn said:
Impact and love have problems resumeing from sleep ocasionaly and the camera messes up on impact ocasionaly
Click to expand...
Click to collapse
this is a problem inherent in winmo, not a specific rom. I have noticed some people saying they cannot connect w/ win 7, using an xp machine fixes the problem. have you tried connecting w/ xp?

Help - ActiveSync Menu gone.

Hello All,
I have an issue that I have lost my Active sync Menu.
what use to happen is when I hooked up my HD2 to the PC. I would get the following menu.
1. ActiveSync
2. Internet Sharing
3. Use as Hard Disk
I now don't have these options appearing and my HD2 just defaults to Syncup with my PC.
I really would like these options to be displayed as it can take a long time to transfer large files to your storage card.
Any help appreciated.
Regards

Start > Settings > Connections > USB to PC > untick the box at the bottom

Thanks to the_scotsman.
Much Appreciated. Very Happy Now!!