Related
I am having issues with my Captivate's micro-USB port being loose. This is my second Captivate, and although it's still under warranty, the first one was RMA'd with the same issue. I never drop the phone while charging, etc, and I've tried multiple chargers so I really can't see why this would be happening. Both phones were 1008 versions, not sure if the 1008 is known to have this issue, or if I just have horrid luck. If anyone here can solder / fix the phone, I'm hesitant to go to AT&T again, as last time they made me go to the store and have the person working there verify that the USB port was not broken (luckily it still charged if you held it a certain way, and even more luckily I was able to flash stock before returning it!). Anyways, this phone is a refurb, and I did call and almost get it replaced as soon as I got it, as it had this issue slightly upon arrival, but decided it would be a hassle. It's only been about a month since the RMA, so I'm pretty sure that if I try now, they're going to get very mean about it, and possibly try and send me a bill for the phone, not to mention, the guy at the AT&T store will probably think something is up.
Any ideas are welcome, I love my Captivate, and I was just getting into develping on XDA :S
Sent from my Cappy using XDA Premium App
I actually found a fix to my issue. I actually was looking at it one day, and figured that in theory, it should be easy to fix, so I (CAREFULLY!!!) took a small knife I had and gently bent the inner part of the port up just a tad (it looked like it was too far down, and yes, I know it's supposed to be far down, but not that far), and it actually worked perfectly.
Thats weird... It kinda has to be what you're doing with it, since mine doesn't even have an irregular slight wiggle.
Obviously it could be just your luck but i doubt it.
edit: and who cares if the att dude thinks somethings up... its your $500..
Like I said, the second one actually had the issue upon arrival, but it was barely noticeable (the USB port would work, but if you moved the phone a lot, etc, it'd disconnect, then reconnect). I called in and talked to them, but decided not to RMA because it'd be a pain (in hindsight I should have...), and the problem just got worse.
Is the port internally lose? Or just when you plug a cable in it wiggles alot? Ive heard about people stretching the casing inside the port from alot of flashing (plugging in the usb). But if the hole port moves inside the phone thats no good lol. You should try to locate a nearby device service center and show them the problem and make sure you walk out with refurb thats fine. Dont worry about the people at atnt questioning it. Hell I use to walk in and just say "gps dosent work" and they would switch it out no questions.
What you said makes sense, the port looks like it's pretty sturdy, it's just that the cable wiggles a LOT, and it makes it hard to get it to even register.
I had the same issue but a new cable solved it
Sent from my samsung captivation
erraz said:
I had the same issue but a new cable solved it
Sent from my samsung captivation
Click to expand...
Click to collapse
I also had this issue, i opened up the stock Samsung Cable end to find that two of the four wires had insufficient strain relief and broke off at the solder joints
Oddly enough I had issues with the first cable as well, but I replaced it, and have tried others from my current.
Anyone else having issues with the mSd card slot?
Plug a card into mine and it makes a sound and works, knock the device or touch the card and it makes the unplugged sound and disappears..
Looking into the port the pins look like they are at a bit of an angle and the plastic slot moved a bit, a few of the screws weren't exactly tight so I gave them a quick tweak, the slot itself doesnt move anymore but the problem persists..
I've raised it with MS support and they are doing an advanced replacement but didnt know if anyone else had seen, had or heard of this before, I'd put it down to a build quality issue tbh..
Just hope they dont say its not covered as some of the screws have a bit of silver showing where I tweaked them, didnt take it to bits or anything depends how anal they are I guess...
Nope no issues.
I have seen a few people show images of obvious user damage they claim as magically appearing that Microsoft did returns on. You should be fine.
Had that same issue on mine; if I held the card in with my fingernail it would work fine, but as soon as I let go it would come out just enough that it would disconnect. Microsoft exchanged it no problem. My only issue was the support rep told me to send back all accessories, yet they only shipped me a lone Surface, with no charger! When I asked another support rep about it, they said that the accessories ship separately, which means I received my Surface overnight, but had to wait a week for the charger.
Yes, I had this issue on my previous surface. I got an exchange on it, as it randomly stopped booting a few weeks ago, and I haven't noticed it on my current one.
As long as I'm not the only one then, I did try a few different cards so knew it wasnt that, its not like I use the card much atm but its nice to have the extra space seeing as I dont have a bloody drop box app yet
Guy I live chated too at Surface support said just send the Surface back without any of the accessories, then rang me a few hours later as there was a problem on the system and then went through it on the phone, if only Samsung support were as good with this Slate 7 I have :/
Anyways replacement should be in the building shortly, it left the local UPS depot just before 6am, not sure how much use I'll get out of it tho as the charger is sat at home and I didnt even think about it until I saw the post above...
New device 50% power, that'll do, installing updates now, d'oh, battery will probably be dead by the time its done, it sbeen going for an hour and is installing 4 of 18...
Replacement sd card is a much better fit, doesn't wiggle in the slot at all and doesn't disconnect when you touch it..
However I might have a different problem now... :\
bump... anyway to fix this without an exchange? going back to school tomorrow and the closest MSoft store is 2 hours away (Tucson --> Scottsdale). The MSD is def loose and it constantly is disconnecting. pain in the ass when trying to listen to music.
my current solution is I stuck a tiny folded sheet of paper in between the msd and the tablet to try and hold it in place. so far so good, but its only been a few min...
eeisner said:
bump... anyway to fix this without an exchange? going back to school tomorrow and the closest MSoft store is 2 hours away (Tucson --> Scottsdale). The MSD is def loose and it constantly is disconnecting. pain in the ass when trying to listen to music.
my current solution is I stuck a tiny folded sheet of paper in between the msd and the tablet to try and hold it in place. so far so good, but its only been a few min...
Click to expand...
Click to collapse
I did mine on an advanced exchange so wasn't an issue for me, meant putting a holding charge on my card tho, not sure if that's an option..
Ok, I've been having some network issues, some of you may know. My service cuts off randomly and im quite sick of it. I've tried everything, nothing will fix it. I dont have an extra $400 laying around to RMA it. So, I am at the last resort. Its been fun, its a good phone, but at this point it really doesnt matter to me if i break it. I can get a moto g for $120 thqt will work like it was ment to. I really thunk its something wrong with the phone, I've never had this problem on tmobile before.
Anyway, im ready to crack this thing open and see if i cant fix it on my own. Maybe a connection is lose or something. I've watched a few videos, looks easy, ive popped my N72013 open so i im not worried.
Now, would anyone have any ideas what it could be? It acts like its a grounding issue, i can do just about anything, but when i download a rom, app, stream a video, anything that maxes out my internet, the service just completely drops, and says "no service" but usually comes back on after a few seconds. Sometimes the whole phone reboots. But, if is use 3g i never have any problems
So, any ideas on what to look for inside the phone? I was gonna unplug the wire for 4G and 3G, inspect maybe dust it off, and plug it back in.
If anyone has any ideas please fill me in. Thanks for your time.
Andromendous said:
Ok, I've been having some network issues, some of you may know. My service cuts off randomly and im quite sick of it. I've tried everything, nothing will fix it. I dont have an extra $400 laying around to RMA it. So, I am at the last resort. Its been fun, its a good phone, but at this point it really doesnt matter to me if i break it. I can get a moto g for $120 thqt will work like it was ment to. I really thunk its something wrong with the phone, I've never had this problem on tmobile before.
Anyway, im ready to crack this thing open and see if i cant fix it on my own. Maybe a connection is lose or something. I've watched a few videos, looks easy, ive popped my N72013 open so i im not worried.
Now, would anyone have any ideas what it could be? It acts like its a grounding issue, i can do just about anything, but when i download a rom, app, stream a video, anything that maxes out my internet, the service just completely drops, and says "no service" but usually comes back on after a few seconds. Sometimes the whole phone reboots. But, if is use 3g i never have any problems
So, any ideas on what to look for inside the phone? I was gonna unplug the wire for 4G and 3G, inspect maybe dust it off, and plug it back in.
If anyone has any ideas please fill me in. Thanks for your time.
Click to expand...
Click to collapse
They don't cash the 400 bucks, they just put a hold on it, I did it recently via a credit card, and the charge was quickly reversed.
I'd recommend replacing it, if you still don't want to do it (because of money), go directly through LG they'll have you send in the device and they'll fix it for you.
What you're suggesting is a last resort when you're out of warranty
Andromendous said:
Ok, I've been having some network issues, some of you may know. My service cuts off randomly and im quite sick of it. I've tried everything, nothing will fix it. I dont have an extra $400 laying around to RMA it. So, I am at the last resort. Its been fun, its a good phone, but at this point it really doesnt matter to me if i break it. I can get a moto g for $120 thqt will work like it was ment to. I really thunk its something wrong with the phone, I've never had this problem on tmobile before.
Anyway, im ready to crack this thing open and see if i cant fix it on my own. Maybe a connection is lose or something. I've watched a few videos, looks easy, ive popped my N72013 open so i im not worried.
Now, would anyone have any ideas what it could be? It acts like its a grounding issue, i can do just about anything, but when i download a rom, app, stream a video, anything that maxes out my internet, the service just completely drops, and says "no service" but usually comes back on after a few seconds. Sometimes the whole phone reboots. But, if is use 3g i never have any problems
So, any ideas on what to look for inside the phone? I was gonna unplug the wire for 4G and 3G, inspect maybe dust it off, and plug it back in.
If anyone has any ideas please fill me in. Thanks for your time.
Click to expand...
Click to collapse
Looks like u are not running stock kernel ? Dose that kernel run westwood or googles default cubic for TCP congestion ? And have u tried restore factory IMG and test ?
drawde40599 said:
Looks like u are not running stock kernel ? Dose that kernel run westwood or googles default cubic for TCP congestion ? And have u tried restore factory IMG and test ?
Click to expand...
Click to collapse
Yes, I've fastboot flashed stock 4.4.4, 4.4.3, 4.4.2, 4.4, tried different kernels, roms, called tmobile numerous times, changed sim cards, gone to different areas in town, you name it, I've probably tried it.
I had a similar problem with my nexus 5 it would be on LTE most of the time but after a few minutes of watching YouTube it would switch to h/h+/3g I did RMA through T-Mobile and this new one hasn't done it if you don't have a warranty your only choice is to replace the antenna or the radio hardware
So you are willing to buy a Moto G but not deal with Google RMA? RMA is free, a hold on your credit card is just that, nothing is charged unless you plan on skipping town with the 2nd Nexus.
Google support is one of the best in the business.They do everything they can possibly do to make your RMA as quick and painless as possible by cross shipping you the replacement device. If you have an issue with Google's RMA then you must have never been forced to RMA something before.
Its not that i have an issue with rma, its just, by the time i save up $400 and they ship me the new one, this phone will be obsolete anyway. The battery life isnt that good, its starting to get lcd bleed, ive read many people go through 5+ device and have the same issues. Im not saying its a bad phone, its the best phone ive ever had and ive had many good android phones im just saying, at this point it doesnt seem worth the time and effort, its like a 50/50 shot that ill get a good one.
Andromendous said:
Its not that i have an issue with rma, its just, by the time i save up $400 and they ship me the new one, this phone will be obsolete anyway. The battery life isnt that good, its starting to get lcd bleed, ive read many people go through 5+ device and have the same issues. Im not saying its a bad phone, its the best phone ive ever had and ive had many good android phones im just saying, at this point it doesnt seem worth the time and effort, its like a 50/50 shot that ill get a good one.
Click to expand...
Click to collapse
It's like you're not listening...
It's a hold, not a charge.
ALSO.
LG (directly) will FIX / REPLACE FOR FREE. NO HOLDS YOU JUST SEND IT IN FIRST.
ericerk said:
It's like you're not listening...
It's a hold, not a charge.
ALSO.
LG (directly) will FIX / REPLACE FOR FREE. NO HOLDS YOU JUST SEND IT IN FIRST.
Click to expand...
Click to collapse
..::FACE PALM::..
Nope... not even going to try anymore
Please dont. You obviously dont get the point of my post.
Not sure if I know the point of your post either, but another option is sending your N5 for RMA first (that way there's no hold on your account at all) and wait for them to send you a new one. You can even buy a moto g use it for the week or two you won't have a phone and return it or something.
I understand that you're trying to see if anyone knows what's wrong but to me it's like a needle in a haystack. You're going to be opening up the device to look for a loose connection, but it could be something completely different. Maybe it's a hardware part that is malfunctioning in which case you would need to track down a replacement. This is why everyone is suggesting you just RMA because, speaking from experience, it really isn't a bad experience at all. If you really want to try and fix it yourself of course you're free to do as you wish since it is your device, but I highly doubt anyone on the forum will be able to say for sure what the problem is.
Sounds like you're in a fringe 4g area like me. A few blocks away I get full 4g. On my block, I get almost nothing. I constantly drops 4g, then picks it back up again.
I get a full lte signal nearly everywhere i go, it doesnt just drop 4g, it drops all service completely
Well I have been a owner of a LG Nexus 5 for the past (almost) 2 years now, in fact I am coming to the end of my contract very soon and will be able to either goto another company or get a new phone.
Anyways, sometime ago I experienced a problem with my microphone and external speakers not working, or at at least some of the time... After a bit of research online I found out my problem was related to a connection inside the phone that connected the bottom assembly to the main board at the top of the phone. It required me to remove the back panel and a few screws to remove the plastic cover, but the poster suggested putting some tape on top of that connection to hold it down more firmly to the socket it connected too. So I did this. I put some black tap (electrical tape cut to fit.) on top and then assembled the phone again. Viola, It worked!
Well, a short time after I decided that I wanted to update my phone from stock kitkat (4.4.4). Always been curious about custom ROMs and gave Cyanogenmod a try. Not only that I got bold and tried the nightly releases of the new marshmellow update. After some time I started experiencing things not working, like the camera, and a lot of freezing, hang ups and random reboots (not so much the reboots as the constant freezing). Often I couldn't get anything on the screen or the phone to respond from a locked state and when I did, often the phone would lag so much, that doing anything would take a long time and proved to be impossible.
I started thinking it was the nightly releases as the source of my problem and just kind of shrugged it off and figured "they will eventually fix the problem". I kept this thinking for quite some time. But it occurred too me one day that something else was causing the issue I was facing for the simple fact that the lag started showing up in the recovery mode (also custom) and a lot of times would continue to show up after I rebooted my phone. Hence, would rule out any 'software' issues I was facing.
I began to think that my problem was hardware. Maybe it was just time for a new phone. But still months away from the end of my contract, this meant I would have to pay off the 'problematic' phone first before getting a new one. I really didn't like that idea. So while looking into this problem, in a last ditch effort, I opened my phone again. Dunno why but I also decided to get rid of the tap on the connection I tried to fix before... I popped off the connection there and had a look at it. It didn't seem damaged in any way nor did the socket. Strange as it was I put that connect back in the socket and put the cover plate back on making sure not to torque the screws and assembled everything back up....
Now the mic and ext speakers work just fine and the phone is working like I just opened the box and took it out for the first time. And I have not once seen any problems... I understand what's happening here... still just wanted to share that for it was definitely weird or what?
https://drive.google.com/open?id=0B0pUNVcVRCJ7MThMc0NHLUNkSEU
Sorry about the link, only way I can upload an image.
Just so there is no confusion... an image of the effected area, inside the phone. The arrow points to the connector and more importantly the area of the connector that seems damaged. If I press lightly where the arrow is pointing on this image, the assemable at the bottom (speaker/mic) will work, indicating a loose connection. Although after visual inspection, I cannot see any damage to connector or the socket. I suppose the only way to really "fix" the issue is to order a new part. As stated previously, already tried tape on the socket to help hold it down, but that seem to cause just as many issues with the phone performance. Any other suggestions?
When ordering a replacement part, you need to be careful because there was another XDA member replaced the same part with a cheap 3rd party solution and the phone would not charge until he replaced it with an oem part.
http://forum.xda-developers.com/google-nexus-5/help/to-buy-usb-charging-port-flex-cable-t3314357
Does anyone else have issues with there ext. speaker and mic not working?
An update on the phone;
back to square one. My ext speaker and mic will not work. And that socket has something to do with the LCD connection on the screen as it will black out if just the right area on the back of the phone is pressed. Only way to revive the phone is to long-press the power button for a reboot. Then will come up fine but speaker and mic still do not work.
audit13 said:
When ordering a replacement part, you need to be careful because there was another XDA member replaced the same part with a cheap 3rd party solution and the phone would not charge until he replaced it with an oem part.
http://forum.xda-developers.com/google-nexus-5/help/to-buy-usb-charging-port-flex-cable-t3314357
Click to expand...
Click to collapse
Wow, that sounds pretty low level tactics of LG... just shameful really, but not hard to believe these days...
Quite honestly, I am just going to replace the phone. Think I got a pretty good run out of it and think its pretty well time for an upgrade. Anyway, for the reason I got the phone, it wont matter the speaker and mic don't work. Just going to use it for development and it will be a good test device.
Oh an this post is related to this thread so I thought I would link it for it may help someone else facing similar problems....
https://forum.cyanogenmod.org/topic/125227-nightly-cm13-releases-make-my-nexus-5-very-slow/
I'm not sure that LG had anything to do with the low-quality replacement parts.
If I were you, look for a n5 with a smashed screen that is suitable for parts.
audit13 said:
I'm not sure that LG had anything to do with the low-quality replacement parts.
If I were you, look for a n5 with a smashed screen that is suitable for parts.
Click to expand...
Click to collapse
Good idea, except the iphone is the most popular phone around here ... find it pretty hard to find one, been looking. But thanks.
I have seen quite a few busted n5 phones in Toronto. I have managed to get working phones with a smashed screen for as little as $30 which is rare for Toronto. Average I pay is $40 to $50. For this price, I either use the phone for parts in several phones or I get third part screen from Aliexpress for around $40 CAD.
I just want to update this as well...
I am fairly certain (now thinking about causes) its not really a design flaw, but more so because I frequently sat on my phone when it was in my back pocket...
audit13 said:
When ordering a replacement part, you need to be careful because there was another XDA member replaced the same part with a cheap 3rd party solution and the phone would not charge until he replaced it with an oem part.
http://forum.xda-developers.com/google-nexus-5/help/to-buy-usb-charging-port-flex-cable-t3314357
Click to expand...
Click to collapse
It was not me but I had that same experience. Replaced with a cheap oem and it didn't charge after that.
I found out why. The charger usb socket was not connected to anything ! Unbelievable! It lacked the black plastic backing for that part of the cable to connect to.
Owned the phone for about a month now. Phone was working perfectly fine for the majority of this time. I use 2 different sims and they were both working smoothly until recently.
A few days ago, I woke up and the phone wouldn't recognize the Sim cards anymore. I took out the Sim tray, cleaned the Sim cards and the tray as thoroughly as I could and they both started working again. A few days later, I restarted my phone and both of the Sims stopped working again.
This time nothing I would do would solve the matter, so for the next few days the phone wouldn't recognize either Sim. I have unlocked the bootloader and rooted, factory reset it and updated it none of which seems to solve the issue.
I use this phone for gaming so last night to my surprise one of the Sims started working (sim was in for a couple of days) and all connectivity was perfectly fine - I tried putting in my other Sim as well but again the phone wouldn't recognize them anymore. Tried putting in only one card on the Sim 1 slot but it made no difference. I don't understand what the issue could be.
Do you have a converted CN version or did you buy a global version? (just curious, as far as I know only CN -> WW versions faced this issue and I would like to know if this is a coincidence or an issue with these versions. But I could be wrong as well)
Nevertheless I would make use of warranty and send it back to Asus to get it repaired.
Yeah it's CN version > WW ROM. It's absurd how randomly it was hit with this issue. Again, the phone was reading a sim card perfectly fine out of the blue last night, then when I took out the Sim tray to insert another card, went back to square one and wouldn't recognize either.
I know.. If you had searched this forum or the rog reddit you would have noticed there are multiple topics like yours and all people explained the very same. Seems totally random.. sometimes it works, sometimes not. Unfortunately no one was ever able to post an accurate answer of why this is the case or how to fix it. At least there is none here, on reddit or the zentalk forums.
Since all device so far were CN -> WW version I don't know any successful case. Asus mostly rejects the support and redirects people to their sellers but those mostly refuse to do something. (they probably know that issue and it's cheaper to do nothing)
I wish you best of luck. Maybe you could try to contact Asus and report the outcome so we finally have a documented successful repair.
Edit: as said, that's only my knowledge, maybe there is a fix and someone found a way but they either didn't publish it or they posted it in a not so well known forum.
I wonder if the connections that touch the SIM are poorly designed. If it is such a widespread issue that randomly seems to come and go, it could be similar to the issue I had with the Kunai 3.
The pins on the side are designed to give a little when sliding the controller off and on the mount or charger. After moving them between the mount and charger twice, some pins fell off and others never popped back into place so they could make a connection. It turns out they never secured the pins well enough to handle it.
Hello, I had a similar issue.
My sim-cards wouldnt be recognized, sometimes only one of them, sometimes both. Additionally, my fingerprint-sensor wasnt working too. By checking pictures of a disassembled phone I could locate the problem inside. It has a connector on the lower end of the phone, which is for sim and FP-sensor. I can definitely and easily come loose.
Quick and dirty fix for me, was pressing with controlled but quite some force on the lower end of the LED-Rog logo while the phone laying flat on the table. I used my thumb, pushed and restarted the phone to check. Didnt work, pushed a bit harder and restarted again until it worked. The back glass has some flex to it, to make it possible to push the connector back in. Still, be careful to not break it, if you try it yourself.
When I found that solution, I've sent it in on warranty for proper fixing with this Information to ASUS. They replaced allegedly the mainboard. But I actually think, they just fixed the connector in place, because bending the phone to a certain degree "unfixed" it in my case again. I dont know, if its the same issue you have, but if it is, hope it helps everyone.
r0me5 said:
Hello, I had a similar issue.
My sim-cards wouldnt be recognized, sometimes only one of them, sometimes both. Additionally, my fingerprint-sensor wasnt working too. By checking pictures of a disassembled phone I could locate the problem inside. It has a connector on the lower end of the phone, which is for sim and FP-sensor. I can definitely and easily come loose.
Quick and dirty fix for me, was pressing with controlled but quite some force on the lower end of the LED-Rog logo while the phone laying flat on the table. I used my thumb, pushed and restarted the phone to check. Didnt work, pushed a bit harder and restarted again until it worked. The back glass has some flex to it, to make it possible to push the connector back in. Still, be careful to not break it, if you try it yourself.
When I found that solution, I've sent it in on warranty for proper fixing with this Information to ASUS. They replaced allegedly the mainboard. But I actually think, they just fixed the connector in place, because bending the phone to a certain degree "unfixed" it in my case again. I dont know, if its the same issue you have, but if it is, hope it helps everyone.
Click to expand...
Click to collapse
Good tip and glad it worked - this could help a few out there. Perhaps ASUS should have included some instructions explaining how to press/bend the device back in order when it happens ...
I had the same issue and quickly found a fix. I bought a OnePlus 9 Pro and relegated this glitchy piece of junk to my desk drawer. Good riddance.
nickdagriff said:
I had the same issue and quickly found a fix. I bought a OnePlus 9 Pro and relegated this glitchy piece of junk to my desk drawer. Good riddance.
Click to expand...
Click to collapse
Paying over $2,000 for a OnePlus 9 Pro seems like an expensive solution, but I am glad it worked out for you. Best of luck over there.
r0me5 said:
Hello, I had a similar issue.
My sim-cards wouldnt be recognized, sometimes only one of them, sometimes both. Additionally, my fingerprint-sensor wasnt working too. By checking pictures of a disassembled phone I could locate the problem inside. It has a connector on the lower end of the phone, which is for sim and FP-sensor. I can definitely and easily come loose.
Quick and dirty fix for me, was pressing with controlled but quite some force on the lower end of the LED-Rog logo while the phone laying flat on the table. I used my thumb, pushed and restarted the phone to check. Didnt work, pushed a bit harder and restarted again until it worked. The back glass has some flex to it, to make it possible to push the connector back in. Still, be careful to not break it, if you try it yourself.
When I found that solution, I've sent it in on warranty for proper fixing with this Information to ASUS. They replaced allegedly the mainboard. But I actually think, they just fixed the connector in place, because bending the phone to a certain degree "unfixed" it in my case again. I dont know, if its the same issue you have, but if it is, hope it helps everyone.
Click to expand...
Click to collapse
Works like a charm here! Congratz!
Omg worked here too, now I have a Poco F3 AND a revived ROG Phone 5...
.
You are the mvp. I love this phone and using it for almost a year. Suddenly sim no longer detected. I tried everything, unlocked bootloader, update firmware. Hour and hours of trying to revive it. I even called Asus and they said to call the Chinese warranty support. Then finally came across this thread. Pressed down hard on the lower end of the logo of the phone on its back. Restarted and now it's detecting the sim again. Thank you so much