Related
the last post tells you the detail
THANX
buzz
Thanks for reply.
Hope for good news
Can't replace wince.nls
I have a Win Mobile Phone Edition 5, very first one in U.S.
I tried to load chinese so that I can read chinese. I copy over font file and am able to see Chinese in Word, providing that I select options.
However I got issues with IE, because I there is no option for me to change the encoding.
I learned that I need to change wince.nls file. And I downloaded your file. Now I got an issue "Access Denied" message when I try to override original wince.nls. Looks like it was in ROM.
Any idea?
Thanks
you should use another file explorer other than the system's one, and then you can overwrite it
the tool is in the attachment(it's in chinese language), it's a green software
The attribute is grayed out.
Thanks for your prompt response and the program.
maybe i did not use it right, some how the menu of the program is mess up. see the attached.
I have Resco Explorer 2005, which also show wince.nls is in rom. Every time I change the other attributes, it changes back when I re-open property page.
While I have a pocket PC 2003 Dell x3. The wince.nls is not rom file.
Can I override rom file?
It is about mid night here in U.S. I will check back first thing in the morning, just in case you do not get response from me right away.
Again, thanks for your help.
on wm2003 it was possible to "override" files in ROM.
Now it is not.
You have to wait until we'll be able to decompress the ROM and inject your wince.nls into ROM.
buzz
ok, i've downloaded your chinese.rar to test-it ...
i've replaced the wince.nls with this procedure
in \windows\ , i've renamed wince.nls to wince5.nls
got an error message "Can't delete wince.nls" , but it's renamed
Copy the new wince.nls to \windows\
Copy fonts to \windows\fonts\
import reg file ... modified
soft-reset
...
Anything appears ...
i'm not able to choose chinese in regional settings
In the registry , after soft-resest , nls automaticly set to "0409"
if i set to 0804 and soft-reset , poof .... 0409
I think there is another problem
OK, I will wait.
One another thing I noticed: through ActiveSync, I can create a folder in windows, (well, as you expect). But I can't copy the wince.nls file to even the newly created folder, not just windows folder. On my PC, the message saying... no space or no permission, etc. I do have like 3-4mb left in main storage and install other program.
Just for your infomation.
it is easily possible to copy wince.nls to your \Windows folder. Just create a cab for it.
But it is not taken into system... That;s the problem here...
Will look at it further...
buzz
I'm success to copy it in my himalaya. I had tried several method, one of them is o.k. but not sure is this one or not.
1) copy the wince.nls to somewhere in your SD Card.
2) Boot your Himalaya into Safe Mode.
3) Then copy the wince.nls to your Himalaya's \windows\
4) Soft Reset.
Do you mean that you can choose the Chinese region now?
Re: The attribute is grayed out.
zoneu said:
Thanks for your prompt response and the program.
maybe i did not use it right, some how the menu of the program is mess up. see the attached.
I have Resco Explorer 2005, which also show wince.nls is in rom. Every time I change the other attributes, it changes back when I re-open property page.
While I have a pocket PC 2003 Dell x3. The wince.nls is not rom file.
Can I override rom file?
It is about mid night here in U.S. I will check back first thing in the morning, just in case you do not get response from me right away.
Again, thanks for your help.
Click to expand...
Click to collapse
see the menu in the attached
buzz_lightyear said:
on wm2003 it was possible to "override" files in ROM.
Now it is not.
You have to wait until we'll be able to decompress the ROM and inject your wince.nls into ROM.
buzz
Click to expand...
Click to collapse
Waiting for your good news ...
only 1.60b could be chineselization
I had tried to replace wince.nls in WM2K5_160C_WWE in various ways mentioned in xda-dev forum. none of them could be finished this job.
so i had to refresh my rom to 1.60b, everything is OK now. I can override the wince.nls, import *.reg, set regional to PRChina and so on.
expecting a perfect WM2K5_160C supproting Simple Chinese.
mazinka said:
I'm success to copy it in my himalaya. I had tried several method, one of them is o.k. but not sure is this one or not.
1) copy the wince.nls to somewhere in your SD Card.
2) Boot your Himalaya into Safe Mode.
3) Then copy the wince.nls to your Himalaya's \windows\
4) Soft Reset.
Click to expand...
Click to collapse
How do u manage to boot ur Himalaya into Safe Mode? Pardon me of becoming a dumbo.
WM5 CHS version SD image
Hi buzz:
I have got a SD image from a Himalaya which rom is CHS version, it's backup from a friend of mine. He got it from the seviece center. but when i use this image to flash my himalya, i replaced the SD head, write it to my SD card and flash...finished, hard reset, and I got an error like this:
"Device authentication failure. Please contact the product manufacture. For reference, please provide your device ID.
xxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxx"
Then I found a way to convert the SD image to a .nbf file for the xda-developers site. converted and flashed using the PC through cable, but the same "Device authentication failure..." error occucred again.
And then, I asked my friend flash the SD image to his device which the image came from. succeeded
!
Any way to make the rom work for my device? help pls...
ljm2020
2005/11/16
Re: WM5 CHS version SD image
ljm2020 said:
Hi buzz:
I have got a SD image from a Himalaya which rom is CHS version, it's backup from a friend of mine. He got it from the seviece center. but when i use this image to flash my himalya, i replaced the SD head, write it to my SD card and flash...finished, hard reset, and I got an error like this:
"Device authentication failure. Please contact the product manufacture. For reference, please provide your device ID.
5083252100381951 38000050bf3f5173"
Then I found a way to convert the SD image to a .nbf file for the xda-developers site. converted and flashed using the PC through cable, but the same "Device authentication failure..." error occucred again.
And then, I asked my friend flash the SD image to his device which the image came from. succeeded
!
Any way to make the rom work for my device? help pls...
ljm2020
2005/11/16
Click to expand...
Click to collapse
hi ljm,
i already answered to you on buzzdev.net )
buzz
I've tried another rom image for my mda compact 2 and now my mdac2 does'nt start any more.
I have tried several rom-images (for compact, atom, ewtc..), but I can install no one .
On the T-Mobile Homepage there is no Image for the MDAc 2.
Can anyone help me ?
I only come to the bootloder screen (red - green - blue).
I need a rom-image, that i can start from the bootloader.
thx
Try this link from TMO UK http://t-mobile.iris-global.com/download_manager_mda_com2.html
Success, M
I've already tried this, and it starts updating but then comes the message :
ERROR [294] : INVALID VENDER ID
THis Update Utility cannot be used for your PDA Phone.....
Maybe I have to unlock the CID first ?
But can I unlock the CID with the aWizard, when the Comp.2 is in the Bootloader mode (red-gree-blue) ?
Ouch,
Yes the cid-unlock will be needed :-( Can't you fix the RUU.conf or something simular with a first line like checkid=1 ? I've read about it on the board & seems to work for magician. & there's some tool like MaUpgradeUT_noid for the wizard too, but I don't remember whether that is awizard :-(
You're almost of to the shop isn't it.
BTW when you unzip the shipped-rom, do you get all kinds of nbf files. & Do they all start with the same word when you open them in hexeditor? I use nbfdec to decode them to a 'normal' file which can be edited, then you could be able to fix the header of the nb1 encode it again & try to update your device.
& have you tried some of these tools ftp://xda:[email protected]/Wizard/DumpROM/
Ouch,
Yes the cid-unlock will be needed :-( Can't you fix the RUU.conf or something simular with a first line like checkid=1 ? I've read about it on the board & seems to work for magician. & there's some tool like MaUpgradeUT_noid for the wizard too, but I don't remember whether that is awizard :-(
You're almost of to the shop isn't it.
BTW when you unzip the shipped-rom, do you get all kinds of nbf files. & Do they all start with the same word when you open them in hexeditor? I use nbfdec to decode them to a 'normal' file which can be edited, then you could be able to fix the header of the nb1 encode it again & try to update your device.
& have you tried some of these tools ftp://xda:[email protected]/Wizard/DumpROM/
In the unzipped folder is no file like RUU.conf.
Only RUU.dll and RUUREsource.dll
There are following files in the folder
EnterBootloader.exe
nk.nbf
README.doc
ROMUpdateUtility.xex
RUUGetInfoi.exe
RUUResource.dll
RUU.dll
And I've downloaded " nbfdec " , but I can not start this program.
I think i have to reboot my computer.
un zip all the files from the t-mobile package
ftp://xda:[email protected]/Wizard/Roms/Wizard_RomUpgradeUtility_noID.rar
download this and unrar and overwrite in the same folder.
connect up the phone in bootloader to pc and run the ..._NoID.exe
as theres no activesync connection it will pause for a bit on the checking existing rom but still let you carry on
ignore the picture of the wizard, just make sure your installing the right nk.nbf for the compact 2
I've exactly done what you said, the update ended with 100 % and now the device starts until the bootloader-screen (red-green-blue).
Have I done something wrong ?
What has happened ?
dave106 said:
ftp://xda:[email protected]/Wizard/Roms/Wizard_RomUpgradeUtility_noID.rar
Click to expand...
Click to collapse
That's the one I was referring to, thanks.
Bundy did you reset afterwards?
M
Yes, I did a Hardreset, a Softreset , but I only get to the picture with the 3 colors.
IPL 1.12
SPL 2.15
I'm terribly sorry, but we've ran out of my knowlegde of the MDA Compact II. So besides the usual question: have you ran the update a second time, for me this would be warranty issue.
Hope Dave is worth more.
Good luck, M
Yes , I have done the update a second time, but with the same effect - the device only starts in the three-color-screen.
So I think I can do nothing more ....
:-(
Well here I am stupified. I updated the ROM to a WM6 the phone works well with one exception USB and Blue tooth connections will not work. I am struggling with an sd card update ( to reinstall another rom) , but have failed so far. Any suggestions as to how to have my phone talk to th epc again. I can use the sd to get files back and forth. Obviously I am a novice.Txs
AT&T 8525 aka hermes,tyten etc,
What phone do you have?
Duuh, should have mentioned that
ATT&T 8525 aka hermes tyten etc
Are you using XP or Vista to do the upgrade?
In case you have a preproduction HERMES and you can not update the ROM (due to the fact that your bootloader is <1.04) here the very easy solution:
- format a SD card with FAT32
- extract the .NBH file from the rom image you like
- rename the .NBH to HERMIMG.NBH and copy it to your SD card
- put SD card in phone and start it in bootloader (hold OK button on left side and POWER button at same time and stick with stylus in RESET on bottom)
- confirm flashing on screen
- flashing might hang after some time but this is normal. Just wait. Complete flash takes about 30 minutes.
This also works for normal (non preproduction) devices but keep in mind that if the CID does not match the flashing might not work.
John
P.S. Same applies to other devices: BREEIMG.NBH, STARIMG.NBH, ...
(i didn't write this)
have a vista x 64 and a xp laptop
bootloader starts
screen shows
Herm100
ipl-1.04
herm100
spl-2.10.Olipro
serial
- format a SD card with FAT32
no issue
- extract the .NBH file from the rom image you like
can do, but only receive
splash.nb os.nb and sub splash file
- rename the .NBH to HERMIMG.NBH and copy it to your SD card
where is the .nbh file coming from? is this the org rom download?
what do I miss?
BTW Thanks for all the help
htmsjurgen said:
- format a SD card with FAT32
no issue
- extract the .NBH file from the rom image you like
can do, but only receive
splash.nb os.nb and sub splash file
- rename the .NBH to HERMIMG.NBH and copy it to your SD card
where is the .nbh file coming from? is this the org rom download?
what do I miss?
BTW Thanks for all the help
Click to expand...
Click to collapse
Just go to the Hermes forums and look for a rom that you like over there and download the package. More than likely, the zip/rar file will have the upgrading tools as well as a file called nk.nbh. This is your rom. Just do as nir36 said and you should be fine.
Good luck!
everything done as above sugested.
I cannot get past the multicolered page with the above mentioned information. ???
Herm100
ipl-1.04
herm100
spl-2.10.Olipro
depending of situation it says serial or usb
I left it their over night with no change,pushed ok buttons no change
what can i do??
did you use a different rom?
I assume you hardspl'd your device prior to flashing a rom right?
Before I did anything I used
http://www.mrvanx.org/thg/index.php?option=com_content&task=view&id=16&Itemid=26
from olipro to hardspl my herm
I then succesfully uploaded a vanilla 2d from josh. As the phone went dead( nirvana) a couple of timnes i tried to use a different rom
which i could upload, afterwards though the phone works but no bluetooth or usb connection hence no contact to activity sys and no restoring of my contacts.
Am i bricked or what is it. Can I somehowe eras all info and start from scratch?
MAin concern is I cannot get my huge contact list back in the phone
I have finaly got it to work fyi if someone needs it
I botted into the bootmaster connected to my computer and installed via "olliinstaller" a new rom told the softawre to ignore and safe hard boot.
It worked .
Thanks for all the suggestions and help
Hi all
Do you switch your HTC Kaiser on first thing in the morning? Are you fed up looking at some naff operator logo. Well, look no further. I've made a custom Splash Image sequence called "Dawn Chorus". It's designed to make you feel that little bit better in the morning. Here goes:
1) Copy "welcomehead.96.png" in "Dawn Chorus.zip" to the \Windows folder on your device. You may need to use a programme like Total Commander PPC.
2) Copy "animated.gif" in "Dawn Chorus.zip" to the "\Windows" folder as above.
3) You MUST have your device HARD SPL'ed. If you don't have Hard SPL installed then don't go any further!
4) Copy KAISIMG.nbh (in Dawn Chorus.zip attached) to the root of your Storage Card.
5) Completely power down your phone using long press power and selecting "Yes".
6) Press and hold the camera button and press the power button. Keep the camera button pressed until you see the tri-colour bootloader screen.
7) When prompted to, press the power button again to start the flash of the new splash screen.
8) Wait for the progress bar to go all the way over. After you have COMPLETED! SUCCESS! or something like that in blue writing on grey background soft-reset the device using the stylus in the hole method.
9) Enjoy your new splash screen and feel better every morning!
10) Delete KAISIMG.nbh from the root of your Storage Card.
Gorgeous
Gorgeous, been some great sunsets over the last few days.
Thanks.
Okay, have to be doing something wrong. Phone goes into bootloader, but no prompt to press power button
What am I doing wrong ? I followed all the steps, copied kaisimg onto my SD, camera power,bootloader, nothing.
hmmm
Well it works for me but never did get the green button holding the power and camera but held it till i got the tricolor screen and waited and restarted and all works ok for me . I have a great sun rise now
Thank you
Root of SD
denco7 said:
Okay, have to be doing something wrong. Phone goes into bootloader, but no prompt to press power button
What am I doing wrong ? I followed all the steps, copied kaisimg onto my SD, camera power,bootloader, nothing.
Click to expand...
Click to collapse
Hi
Did you place KAISIMG.nbh on the root of your SD card? Is your device security unlocked? If you can't get it to work, try SSPL. I don't know if that will work but it may be worth a try.
Cheers
andrew-in-woking
Thanks for the reply.
Yes , I put it on the root of my SD card. Tried moving it with Total Commander, tried cutting and pasting it on to the SDcard. My phone is security unlocked and flashed with 3.29Hard. For some reason when I put the phone into Bootloader, KAISIMG.nhb just won't run. Is there a way to run it off the desktop?
andrew-in-woking said:
Hi
Did you place KAISIMG.nbh on the root of your SD card? Is your device security unlocked? If you can't get it to work, try SSPL. I don't know if that will work but it may be worth a try.
Cheers
andrew-in-woking
Click to expand...
Click to collapse
Don't use SSPL.
SSPL is for flashing the SPL (Bootloader) on the device, nothing more.
@denco, you need a FAT32 formatted card, and sometimes some card's just don't work. Just flash it with the RUU.
Dave
denco7 said:
Thanks for the reply.
Yes , I put it on the root of my SD card. Tried moving it with Total Commander, tried cutting and pasting it on to the SDcard. My phone is security unlocked and flashed with 3.29Hard. For some reason when I put the phone into Bootloader, KAISIMG.nhb just won't run. Is there a way to run it off the desktop?
Click to expand...
Click to collapse
Why noy do it the noramal way with KaiserCustomRUU.exe and the .nhb via active sync?
Sorry i Dave was in the background... "great minds think alike"
Replace existing ROM/Radio image file in update package.
denco7 said:
Thanks for the reply.
Yes , I put it on the root of my SD card. Tried moving it with Total Commander, tried cutting and pasting it on to the SDcard. My phone is security unlocked and flashed with 3.29Hard. For some reason when I put the phone into Bootloader, KAISIMG.nhb just won't run. Is there a way to run it off the desktop?
Click to expand...
Click to collapse
Hi denco7
Yes, take a ROM/Radio update with any update file in and CustomRUU.exe. Rename KAISIMG.nbh to the same as the existng .nbh file in the folder and replace the existing update image file. Then just flash from desktop as usual.
Cheers
andrew-in-woking
Not sure if it's called "KAISIMG.nhb" on your device or was just a typo, but it's "KAISIMG.nBH, not "KAISIMG.nHB."
thanks for this ^^ normally i only reboot my kaiser if something went wrong
so your great startup screens really help me to calm down
btw. flashing via sd-card doesn't work for me.
renaming to RUU_signed.nbh and flashing using active synced worked fine
operative1 said:
thanks for this ^^ normally i only reboot my kaiser if something went wrong
so your great startup screens really help me to calm down
btw. flashing via sd-card doesn't work for me.
renaming to RUU_signed.nbh and flashing using active synced worked fine
Click to expand...
Click to collapse
FYI: The RUU will flash the first file it finds with an NBH extension in it's directory. No need to re-name, just place the RUU and and NBH in the same directory and it will flash
Dave
DaveShaw said:
Don't use SSPL.
SSPL is for flashing the SPL (Bootloader) on the device, nothing more.
@denco, you need a FAT32 formatted card, and sometimes some card's just don't work. Just flash it with the RUU.
Dave
Click to expand...
Click to collapse
Thanks, Dave
That was my first thought, that my card wasn't formatted right. Just wanted to make sure running RUU with KAISIMG would be alright.
EDIT: That worked, one question though, is it supposed to be animated ? Either way it is beautiful, thanks for this and the Neon theme, which I use all the time.
Dear All
I can't flash android in Polaris
1. I downlaod warm Donut from http://forum.xda-developers.com/showthread.php?t=619980
2. .bnh from http://it029000.massey.ac.nz/vogue/files/?C=M;O=D
3.and CustomRUU.exe
And I format SD-card FAT32,Copy androidinstall.tar under andboot folder,copy file .nbh to folder ROMUpdateUtility and rename file .nbh to ruu_signed.nbh
put in sd card to my phone(Polaris POLA100)
4.Boot Loader My phone
5.jeck in usb my phone
6.run ROMUpdateUtility.exe
When i flash complete 100% My Phone auto reboot,But My Phone still and show Smart mobility
Please help me I desired use Android in My polaris
Note: I unlock my phone complete
Thank you
kittipong said:
Dear All
I can't flash android in Polaris
1. I downlaod warm Donut from http://forum.xda-developers.com/showthread.php?t=619980
2. .bnh from http://it029000.massey.ac.nz/vogue/files/?C=M;O=D
3.and CustomRUU.exe
And I format SD-card FAT32,Copy androidinstall.tar under andboot folder,copy file .nbh to folder ROMUpdateUtility and rename file .nbh to ruu_signed.nbh
put in sd card to my phone(Polaris POLA100)
4.Boot Loader My phone
5.jeck in usb my phone
6.run ROMUpdateUtility.exe
When i flash complete 100% My Phone auto reboot,But My Phone still and show Smart mobility
Please help me I desired use Android in My polaris
Note: I unlock my phone complete
Thank you
Click to expand...
Click to collapse
It's OK that you unlocked your phone, but... did you install Hard SPL before the whole process? IT'S ESSENTIAL!
to SuperJMN for Help me
SuperJMN said:
It's OK that you unlocked your phone, but... did you install Hard SPL before the whole process? IT'S ESSENTIAL!
Click to expand...
Click to collapse
Thank SuperJMN
But I Unlock My pola before All Process flash Android
what nbh have you used?
Happend the same to me with the latest nbh from DZO.
This one: polaimg-panel1-320-08-04-10.nbh dont work for me, stuck at smart mobility.
Then I used an older one and voila! Android!
To frooggy
frooggy said:
what nbh have you used?
Happend the same to me with the latest nbh from DZO.
This one: polaimg-panel1-320-08-04-10.nbh dont work for me, stuck at smart mobility.
Then I used an older one and voila! Android!
Click to expand...
Click to collapse
Hi frooggy
I used nbh file polaimg-panel1-320-31-03-10.nbh same proplem But I try used nbh file polaimg-240x320-03-02-10.nbh and report again
and give knowledge me polaimg-panel1, polaimg-panel2 and polaimg-panel3 What Different
kittipong said:
Hi frooggy
I used nbh file polaimg-panel1-320-31-03-10.nbh same proplem But I try used nbh file polaimg-240x320-03-02-10.nbh and report again
and give knowledge me polaimg-panel1, polaimg-panel2 and polaimg-panel3 What Different
Click to expand...
Click to collapse
kittypong, you should try all the panels until it works nicely in your phone. Each device has an specific paneltype. One of the most common is the paneltype 1. Try to flash that one dated 20-February-2010 from here: http://sourceforge.net/projects/androidhtc/files/2010-02-20/polaris/
Are you following a guide to flash your device?
Please help me
Please can you help me ? What have I do when on my phone screen is still only "smart mobility". How can I flash back system ? Thanks.
cabaja said:
Please can you help me ? What have I do when on my phone screen is still only "smart mobility". How can I flash back system ? Thanks.
Click to expand...
Click to collapse
something is wrong with you flash....seach and do a sdcard flash with the original wm 6.1 rom
to SuperJMN
SuperJMN said:
kittypong, you should try all the panels until it works nicely in your phone. Each device has an specific paneltype. One of the most common is the paneltype 1. Try to flash that one dated 20-February-2010 from here: http://sourceforge.net/projects/androidhtc/files/2010-02-20/polaris/
Are you following a guide to flash your device?
Click to expand...
Click to collapse
Hi SuperJMN
I try nbh file POLAIMG-PANEL1-320.nbh work boot But My Phone Still Black Screen and not flash continue and Error message
init:Unable to open permisstent property directory /data/property errno:2
Now I Unlock
POLA100 MFG
Ver SPL-2.20.OliNex
CPLD-2
Please help me Thank you
kittipong said:
Hi SuperJMN
I try nbh file POLAIMG-PANEL1-320.nbh work boot But My Phone Still Black Screen and not flash continue and Error message
init:Unable to open permisstent property directory /data/property errno:2
Now I Unlock
POLA100 MFG
Ver SPL-2.20.OliNex
CPLD-2
Please help me Thank you
Click to expand...
Click to collapse
Kittipong, when you flash to NAND you actually don't have any system, only a kernel that allows to boot from it. You have to install Android after this step.
I suggest you to follow the guide I made for NAND booting here: http://forum.xda-developers.com/showthread.php?t=625200
I think you forgot to follow some steps.
i did the same thing, but i've a different problem: after "smart mobility" there are 2 pulses of vibration and the screen become black.
nothing else.
now, when i connect my phone to pc, the customruu doesn't work.
what can i do?
You need to flash from the spl tri colour screen,black screen usually the wrong panel .nbh
meknb said:
You need to flash from the spl tri colour screen,black screen usually the wrong panel .nbh
Click to expand...
Click to collapse
i forgot to say that i can't enter bootloder (pressing camera and soft reset)
Take the battery out then replace then power on and hold the cam button at the same time,i think that works.
meknb said:
Take the battery out then replace then power on and hold the cam button at the same time,i think that works.
Click to expand...
Click to collapse
ty everything works
to SuperJMN
SuperJMN said:
Kittipong, when you flash to NAND you actually don't have any system, only a kernel that allows to boot from it. You have to install Android after this step.
I suggest you to follow the guide I made for NAND booting here: http://forum.xda-developers.com/showthread.php?t=625200
I think you forgot to follow some steps.
Click to expand...
Click to collapse
Now i can't flash NAND,But when i remove card and find in card i have 2 file please help me
to SuperJMN
SuperJMN said:
Kittipong, when you flash to NAND you actually don't have any system, only a kernel that allows to boot from it. You have to install Android after this step.
I suggest you to follow the guide I made for NAND booting here: http://forum.xda-developers.com/showthread.php?t=625200
I think you forgot to follow some steps.
Click to expand...
Click to collapse
Now i can't NAND flash. But when i remove card find in card in card have 2 file you can help me
kittipong said:
...not flash continue and Error message
init: Unable to open permisstent property directory /data/property errno:2
...Please help me...
Click to expand...
Click to collapse
do not only "single press" to middle button...
you must keep pressing to middle button!