I replaced the XIP part in Dr. Martin's ROM with new XIP 20202
I nerver change anything except XIP.
New rom download from:
Skydrive
Why I do this ?
Because the new XIP is speed up.
The file list speed increased 58%
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
See this topic:
http://forum.xda-developers.com/showthread.php?t=402289
It's still Dr. Martin's rom
if you want to donate.
see here:
http://forum.xda-developers.com/showthread.php?t=384129
I'm downloading.....Thank you
Downloading now, will report any issues. I'll be forcing a Sprite Backup to this, so hopefully it works, if all that was done is a new XIP then I don't see why it wouldn't.
The Vox community thanks you for your work.
Good job Hikey. Improvement is visible in Resco files listing.
Also since u only touched XIP, you saved my lot of time. Just taking sprite backup of Gonzo 6.1 and installing your ROM and restoring backup, thats it.
No reinstallations. Special thanks!
Yes. 6.1 backup from the original 6.1 worked. File R/W is so much faster, extremely noticeable. I highly suggest anybody running 6.1 V1 to upgrade to this.
If you updated to this rom, you can not find any change except the version No. in start>>settings>> about
And the speed of default explorer will not change, must use resco explorer
because of the lack of 20202 SYS part.
actually , i have my own rom.
but it's chinese default.
http://forum.xda-developers.com/showpost.php?p=2329772&postcount=1
Speedy
I just updated from Dr. Martin's ROM to this one, WOW is all I can say. This thing is fast, everywhere, not just File Read/Write, but everything is snappy! Flashed it, then did a restore from a Sprite backup, all worked like a charm. I'm even running at fastest clock speed. NO problems. Great job Hikey.
can sprite backup sucessfully restore the applications (shortcuts etc) which are installed in mem card?
Secondly, the sprite back up which came free with the phone is not installing saying " to upgrade ROM". Axctually I am on Gonzo's 6.1 v1.1 ROM. I think that's why the bundled software is not installing.
Any suggestions.
cease said:
I just updated from Dr. Martin's ROM to this one, WOW is all I can say. This thing is fast, everywhere, not just File Read/Write, but everything is snappy! Flashed it, then did a restore from a Sprite backup, all worked like a charm. I'm even running at fastest clock speed. NO problems. Great job Hikey.
Click to expand...
Click to collapse
This xip size is smaller than Dr Martin's
I resized the ini*.dat and rgu files,removed the second boot screen(the WM6.0 one).
so you have more RAM after boot.
I flashed the ROM and restored from backup. Everything worked smooth. The ROM is indeed faster. Good job done Hikey. Kudos to you,
Just updated from Dr Martins v1.1 to this one.. does seem quicker in general to me.
Did a backup, flashed it, restored backup.. didn't take long.
Start menu and file listing are defiantly quicker though. Nice Work!!
I've also just gone from Dr. Gonzo's to this and definitely seems snappier. Thanks.
parthabhatta said:
can sprite backup sucessfully restore the applications (shortcuts etc) which are installed in mem card?
Secondly, the sprite back up which came free with the phone is not installing saying " to upgrade ROM". Axctually I am on Gonzo's 6.1 v1.1 ROM. I think that's why the bundled software is not installing.
Any suggestions.
Click to expand...
Click to collapse
I run several apps from my SD card, and after restore they all work as they did prior to flash and restore. So I'd have to say the answer is YES, Sprite can restore them.
parthabhatta said:
can sprite backup sucessfully restore the applications (shortcuts etc) which are installed in mem card?
Secondly, the sprite back up which came free with the phone is not installing saying " to upgrade ROM". Axctually I am on Gonzo's 6.1 v1.1 ROM. I think that's why the bundled software is not installing.
Any suggestions.
Click to expand...
Click to collapse
Answer to your second question. The Sprite you got with the original won't restore because you have flashed to Gonzo's 6.1. It's a different ROM image so Sprite can't do anything with it. Only if you are on Gonzo, then backup, then flash with XIP, can you restore from the backup. To get the HTC apps you'll have to go find the HTC apps you want and reinstall. Not sure what they have that you'd want to keep. Gonzo's ROM has better applications already.
I've installed it now and it works really nice!
I didn't use "sprite beckup" because I have had a lot of programs installed that I don't need.
Thanks Hikey!
Please put there also new Radio ROM
Like in that 96dpi ROM they did
RA
Virus found in the ZIP package.
Hi Hikey,
your package is not virus free.
Please, check and clean it and upload again.
Thanks.
No problems reported with Nod32. Probably a false positive?
No prob reported with Nod 32 and also with Symentec Corporate Edition.
Thanks for the ROM by the way
MUCH snappier on my phone. Thanks a ton!
Related
As always the following rules apply with all of my roms except for the game part since the lite version do not include them..
====================================
Goals
Create a rom that will offer the following to end users.
Faster
Any body can build a rom faster than the stock one, but will it be more stable?
Looks slick
A phone that will have an interface your proud to show off to your family and friends.
Storage
Extra storage space in case you were not able to buy a sd card.
Easy to use
Comes with apps already install so people do not have to waste too much time downloading extra apps and etc.
Stable
A rom that you will not have to soft reset daily. Fixing common issues found with the original rom.
Fun
A rom with extra games so when your stuck some where and there is nothing to do, you can always play games.
====================================
There will be two versions:
Open Touch v4.0 UC
This one will be like the lite but with the following options.
1. UC added but with a twist, meaning it will not auto load, you will have the option to run it yourself.
2. Open Touch Cab Center = I'm going to include some commanly used cabs with the rom, you choose which ones you want and need.
3. Voice speed dial and voice command have been added and working.
Specs:
6MB Pagepool
45MB+ Storage and 26MB+ Programs - Due to Voice command
Open Touch v4.0 Biggy
Still listing
Snap shots
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
"2. Open Touch Cab Center = I'm going to include some commanly used cabs with the rom, you choose which ones you want and need."
Does this mean we can add any cab we want to the rom or we can only choose what cabs you have included? Keep up the good work.
Looking good. You may want to include the new radio in this rom.
dongo1 said:
"2. Open Touch Cab Center = I'm going to include some commanly used cabs with the rom, you choose which ones you want and need."
Does this mean we can add any cab we want to the rom or we can only choose what cabs you have included? Keep up the good work.
Click to expand...
Click to collapse
I've included commanly used cabs with this rom. You will simply go to Cabs Center and click to install the ones you need or want.
There will also be another option within the Cab Center for you to install cabs from your sd card.
JLine05 said:
Looking good. You may want to include the new radio in this rom.
Click to expand...
Click to collapse
Thanks bro,
Hey ttran
Whats the ETA?
thanks
mjo404 said:
Hey ttran
Whats the ETA?
thanks
Click to expand...
Click to collapse
I'm trying to have the beta ready for the beta team to test tomorrow.
I'm currently working on adding more cabs to the rom.
Great!! I am done with finals, now have time to play!!
i know...
its been asked but i just read a thread and it confused me, i have the 3.0 biggy on my device and used USPL for the rom, but now am i goin to need to need HardSPL to install this new rom since its not clean 'out of the box'...i read tht as long as ur IPL and SPL were above 4.0 then u can still use USPL to install...or am i completly wrong?
timace said:
its been asked but i just read a thread and it confused me, i have the 3.0 biggy on my device and used USPL for the rom, but now am i goin to need to need HardSPL to install this new rom since its not clean 'out of the box'...i read tht as long as ur IPL and SPL were above 4.0 then u can still use USPL to install...or am i completly wrong?
Click to expand...
Click to collapse
That's wrong information...
I don't like to force people to use HARD-SPL unless they want to.
I mean I could include it as a package and have people just become HARD-SPL without knowing, but that would be the wrong thing to do.
I know that the current installation process is kind of old but it's made for folks that do not wish to have their devices become HARD-SPL.
ttran001 said:
That's wrong information...
I don't like to force people to use HARD-SPL unless they want to.
I mean I could include it as a package and have people just become HARD-SPL without knowing, but that would be the wrong thing to do.
I know that the current installation process is kind of old but it's made for folks that do not wish to have their devices become HARD-SPL.
Click to expand...
Click to collapse
Awesome, thanks for your quick response and great work, cant wait...
I am a little confused.
so if i understand correctly.
in UC version after the install it will give us option which cabs to install right?
if that is the case isn't that going to affect the size of the installed rom and space after install is done
tipz said:
I am a little confused.
so if i understand correctly.
in UC version after the install it will give us option which cabs to install right?
if that is the case isn't that going to affect the size of the installed rom and space after install is done
Click to expand...
Click to collapse
You are correct, if you notice the program and storage space is less than the v3.0 lite, but not much..
There are two options, one is to install cabs already included in the rom, which will reduce some of the space.
Two install cabs from your own sd card to your sd card which will not effect the ram size.
In the original UC, you have to have your config file and cabs already on your sd card before flashing the rom. Since it will auto install after the flashing has completed. I've made it where you can use the UC option when your ready.
Looks good, i'm excited! i've been waiting to try and fix my phone till 4.0 was released.
Is there any way to have the theme the same color as the backround? It matches my wing PERFECTLY. I've been searching around for a navy blue-ish theme with no luck. Even if you can just provide a cab to have that nstead of the black htc theme would be great.
aad4321 said:
mabye i diddnt see the answer in the previous posts, but you said you are releasing a beta tonight? and when you do release beta, how long are you planing on keeping it beta untill you release the final version?
Click to expand...
Click to collapse
No,
I'm going to release the beta version only to the beta team tomorrow for testing. This takes a day or two depending on how many issues come up.
Once everything looks good I will then release it.
Regards,
will bbconnect work with this rom?
ttran001 said:
You are correct, if you notice the program and storage space is less than the v3.0 lite, but not much.
There are two options, one is to install cabs already included in the rom, which will reduce some of the space.
Two install cabs from your own sd card to your sd card which will not effect the ram size.
In the original UC, you have to have your config file and cabs already on your sd card before flashing the rom. Since it will auto install after the flashing has completed. I've made it where you can use the UC option when your ready.
Click to expand...
Click to collapse
I like that - so does this mean no more 5 - 7 hours installation process for me? That's about how long it takes for me to install from start to finish after flashing. I like the lite and slimeline versions btw.
i am waiting eagerly for this ROM.. if you are including voice speed dial, can you please make sure that registry entries and the voice command files are included ? secondly if possible can you please take care of the home screen not aligning correctly when switching from landscape to portrait
ELFin Windows Mobile 6.1 Official - TrueG Customized
4th Edition (Download links below)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
TrueG v4 Now Available!
The Following Changes have been made:
Removed Cyberon Voice Speed Dial (replaced with MS Voice Command)
Removed link to WM Task Manger (replaced with FdcSoft Task Manager v3.1)
Updated GoogleMaps to version 2.2.0.20
Updated JBed to version 20080912_5_1
Changed default Short Date format (as seen in first screen shot)
Everything else from v3 remains the same.......
TrueG v3 has the following features:
ELFin WM 6.1 3.10.710.0 Base
includes everything from the official release with the following changes.....
-removed JBlend
-removed VoiceCommander
-removed application security (thanks to ayyu3m)
-removed SQM (Customer Experience) (no2chem)
-added JBed (from Blackstone)
-added VoiceDialer (from Blackstone)
-added RemoteDesktopMobile
-added BlueTooth Explorer (from Opal)
-upgraded .Net to 3.5
-fixed TouchFlo 'Butterfinger effect'
Bonus for Rogers customers:
-enabled Rogers CNAP (caller name presentation - for those who subscribe to it)
-added Rogers Store certificates
-updated IE User Agent to support Rogers Mall
This should work on an ELF, but it was designed with the ELFin in mind, so it uses a lot of system and program memory.
PagePool:
ELFin 12 MB
ELF 8 MB
Memory Stats (after soft reset) - see screen shot above
Installation:
I have included the flashing utility from Hybrid Kitchen. If you go to the RUU folder and open ROMUpdateUtility it will automatically load up my RUU_Signed.nbh and flash it for you. This utility is not for unlocking and you must have your device unlocked ahead of time (see link below). Ignore warning about flashing only with a white screen (assuming you have a USPL)
For a quicker way to flash your device, rename the RUU_Signed.nbh to ELF0IMG.nbh and copy it to the root of a FAT32 formated SD card. Assuming your device is unlocked USPL (3.07 or higher) you will be given the option to flash directly from the SD card in 1/10 the time it takes to flash over USB.
To unlock your device see this thread for SPL unlocking...
Hard-SPL - http://forum.xda-developers.com/showthread.php?t=445666
USPL - http://forum.xda-developers.com/showthread.php?t=445666
Version 4 - Download here...
http://rapidshare.com/files/167760358/ELFin.TrueG.v4.7z
http://www.myunspace.com/?d=CF5EDE701
Version 3 - Download here....
http://rapidshare.com/files/165889496/ELFin.TrueG.v3.7z
http://www.myunspace.com/?d=624BBE311
Links to version 2 have been removed due to a bug in SD Encryption (it was enabled by default and could not be disabled)
Auto_Scroll_fix.cab was added for use with version 2, I will leave the attachment for anyone else who wants to use it.
Since I no longer own my HTC Touch I thought I would upload my source files so that anyone who wants to can rebuild/modify
it any way they want. Enjoy!
Version 4 Source Files....
http://www.myunspace.com/?d=44B27A391
Congrats on your first ROM!
keep up the good work trueg. i m sure you wud soon be aspired to release custom roms. and i hope so
now rogers user can say...ROGERS rock!!
hehe
Hey buddy,
Good job! Since you took out the OEMOPERATORS directory, you should probably include the Rogers.CAB that is floating around. It contains all the customization for the network. You can convert that to an OEM or include it as an attachment.
BTW You can credit ayyu3m (not me) for most of the porting tips
Actually, with this release the OEM directory was left as is (Rogers customizations and all). At one point I mentioned to you that I had tried it without the OEMOPERATORS folder but at that point I was just trying to figure out what different changes would do.
After I put it back in, I set out to find a WM 6.1 SYS. I tried the different SYS packages from the NIKE upgrading folder, but they all had things removed (I found out later that they can be downloaded separately). So I started looking for an official release that would be complete and came across the official upgrade from AT&T for the Tilt. Porting it was nice and easy with Hybrid Kitchen. =)
Hey guys,
I installed this rom after doing the CID unlock, and it went thru with no issues whatsoever. Ran for about 5mins or so flawlessly with 6.1, then it started this rebooting loop...where it will reboot every about 5mins. I've done hard resets and whatnot and the issue is still there. any help would be appreciated.
Cheers,
DiSkO
disk0 said:
Hey guys,
I installed this rom after doing the CID unlock, and it went thru with no issues whatsoever. Ran for about 5mins or so flawlessly with 6.1, then it started this rebooting loop...where it will reboot every about 5mins. I've done hard resets and whatnot and the issue is still there. any help would be appreciated.
Cheers,
DiSkO
Click to expand...
Click to collapse
trueg,
Which SYS did you use? I wonder if it is related to that ActiveSync spontaneous restart issue (every 5 minutes). Try using the Opal's 19971 SYS - that one is very stable in my opinion so far.
what do you mean by SYS? and where do i get this 19971 SYS?
disk0 said:
what do you mean by SYS? and where do i get this 19971 SYS?
Click to expand...
Click to collapse
It was actually directed at the creator; it's cooking-talk
I used the SYS from the official AT&T Tilt 6.1 release. I have not had any resets on my device, but I almost never use ActiveSync (My system is Linux based).
I imagine the Opal SYS is newer than the AT&T one, so I will gladly give it a shot. Does it include Microsoft Voice Command by chance? I needed to do a minor update anyway, the OEM folder has a registry entry that sets the default zoom in IE to 'larger' instead of 'normal'. Probably because it was meant for the older IE.
I guess I should add that I use the following IPL/SPL...
IPL: 2.27.0002
SPL: 2.28.0000
When I do run ActiveSync, it is within Windows XP.
Updated thread with new edition. =)
What's the difference between WWE and Canadian ?
Good work trueg, I'll try it out as soon as I finish using up both my Elfins for testing my own ROMs ;-)
Grant, there's a newer version of Jbed around - 20080610_2_1. The Blackstone version is only 20080418_2_1.
chihliouma said:
What's the difference between WWE and Canadian ?
Click to expand...
Click to collapse
It's not really a language difference. I added a few things specifically for Rogers/Fido customers, set the default region to English (Canada) and added only Canadian Cities as the default for the Weather Widget. I actually just changed the title so that it's less confusing.
dsixda said:
Grant, there's a newer version of Jbed around - 20080610_2_1. The Blackstone version is only 20080418_2_1.
Click to expand...
Click to collapse
Ya, I noticed that it was a bit older when I dumped it. I have 20080610 on my computer but I figured if it is good enough for Blackstone, it should be fine.
I suppose I can upgrade it if anyone really wants it.
trueg said:
Ya, I noticed that it was a bit older when I dumped it. I have 20080610 on my computer but I figured if it is good enough for Blackstone, it should be fine.
I suppose I can upgrade it if anyone really wants it.
Click to expand...
Click to collapse
Don't bother updating.. if it works then it's fine. Otherwise you'll get into the continuous loop of updating your ROM everytime there's a newer software, newer SYS, newer XIP.. and then it becomes a full-time job
dsixda said:
Don't bother updating.. if it works then it's fine. Otherwise you'll get into the continuous loop of updating your ROM everytime there's a newer software, newer SYS, newer XIP.. and then it becomes a full-time job
Click to expand...
Click to collapse
Don't I know it!
I could have went with a newer SYS and XIP and fixed any bugs, but since this was an official release I'm hoping that it has a fair amount of testing. I need to get off the cooking train; it has taken over way too much of my life. I'm hoping that this build will keep me happy for a while (or at least require a minimal amount of fixes).
trueg said:
Don't I know it!
I could have went with a newer SYS and XIP and fixed any bugs, but since this was an official release I'm hoping that it has a fair amount of testing. I need to get off the cooking train; it has taken over way too much of my life. I'm hoping that this build will keep me happy for a while (or at least require a minimal amount of fixes).
Click to expand...
Click to collapse
hehe. good choice bro. this gives an onset of new choices to users. as you my elite chef has decided to use builds that have been officially released and not the ones that came down from where ever. hehe
as said...a really good choice...and keep up the good work bro. now take a break...cos cooking needs time and focus and i have learned that, kinda hard way...even if you dont see any of my roms floating
lol...i jus cant stop writing...cos i wana say...i m really happy to see you going ahead. cos the other days i used to see you experimenting and trying to port builds...specially the syssy and xippy
people...trueg is an example of what a cook can aspire thru patience, learning and a keen choice
nice rom trueg your work appreciated
This is a guide to install the lastest wm6.1 firmware available free to your Ipaq 500/510/502/514 etc.
Windows Mobile 6.1 Lite Version by Silix
Screenshots:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Advantages:
Homescreen Panels
Fast and Lite version
Wifi Works!
SMS Threaded Mode
English and Russian
Internet Explorer updated
Resco Explorer as File Manager
Windows Player
Custom Load icon
Disadvantages:
Doesn't have bluetooth(could be add by using Tornato a2dp hack?)
No microsoft office(can be add later)
No Windows Live Messenger(can be add, see below)
It's not completly traslated to English(some Russian texts)
Guide
Read Carefully!
Download this files to your PC: SP38066, ROMUpdate.zip, HP514-V1RCL.7z(or Mirror 1)
Charge 100% your battery
Start SP38066.exe, continue until you see some files being extracted then when the HPRUU begins, cancel it.
Go to C/iPAQ/sp38066/ then extract there the contents of Test01.rar, it should replace some files there.
Start HPRUU.exe
Follow the process to install RUssian ROM
After sucessfull ROM upgrade, Extract the files of HP514V1RCL to the same directory, then replace the old .nbf file. Or erase the old one .nbf
Turn off your cellphone, then press left, down on the keypad while pressing the RED key to turn it on in bootloader mode.
Connect to the PC,Run HPRUU.exe again, it should install WM6.1 Lite version
It stops at 44%, make hardreset, if it cannot boot after reboot, you miss a step or something...
Add-ons:
CHome Update: Changes the default homescreen to fit the size of the screen, adds the wm6.1 boot image, and some little fixes, just run the .cab after installing WM6. HERE is the link.
Chome Config Program: Utility to configurate the CHome homescreen, you can add or remove tabs, etc. Just unzip and run it.Here
Contact Info/Buy full version
The full Wm6.1 ROM costs $10 and features bluetooth as the difference. You can download the ROM for free, but it will not boot up until you buy a key(that is device-specific). It must be paid through Yandex Money(a russian money system) that is very strange and nobody has a account there. lol There isn't great advantages from this ROM, and i hope the devs release it for free a new version, or the tools they used to create it.(our ipaqs are very old! they should give us a free ROM!)
Official full version Thread(in russian, use google translate)
English Thread with useful info
thanks to Silix, Strik3r developer of the ROM. And cingibi for the T9 files!
Please post if any issues.
I will upload Messenger, Office, and other programs.
rom need t9
t9 Chinese.cab (554KB)
t9 Czech.cab (462KB)
t9 Danish (399KB)
t9 Dutch.cab (399KB)
t9 English.cab (379KB)
t9 French.cab (390KB)
t9 Finnish (437KB)
t9 German.cab (393KB)
t9 Greek.cab (498KB)
t9 Hungarian.cab (459KB)
t9 Italian.cab (393KB)
t9 Norwegian.cab (399KB)
t9 Polski.cab (427KB)
t9 Portuguese.cab (387KB)
t9 Romanian.cab (404KB)
t9 Russian.cab (450KB)
t9 Slovak.cab (444KB)
t9 Spanish.cab (392KB)
t9 Swedish.cab (399KB)
t9 Thai.cab (377KB)
t9 Turkish.cab (471KB)
t9 Greek-English (377KB)
t9 Chinese by karhoe (4.28MB)
Hows about the full version anybody got getipaq device to make a key.txt id like to see the text and a already paid for key i wanna see if its crackable
I run Wifi, on BT I working yet, actually I see Bt in registry... but don't work yet. I working on it.
Sorry for my english.
I couldn't download HP514-V1RCL.7z on uploading.com. Would you please upload this to another host. Thanks so much!
donquichote said:
I couldn't download HP514-V1RCL.7z on uploading.com. Would you please upload this to another host. Thanks so much!
Click to expand...
Click to collapse
HP514V1RC1L.7z
Hi there people,
This is great project. I am from Croatia and I would like to have my HP514 with wm6.1 in english.
Can you please tell me when we can expect final version of update?
I tryed to perform update using this guide but updater responded with SKU ID error (Sku id is ABB)
Hi, You must use HACK SKU http://uploading.com/files/TZST6JPD/Test01.rar.html , when You write this rom, You must hard reset, and when he start first time spent to 5 min, and the keys don't work but You must wait this 5 min
OK, update wouldnt start with test01 Romupdate file. But I found Other roumupdate file (newer) on forum and run it with that file. Update run till 45 procent and then suddenly juped to finished.
After that i tryed to boot machine but it wont start.
Also, I tryed to run rom update again but update program says that it has problems comunicating with phone.....
On phone startup screen it says 2.05.00 0.76 (like before flash) and it doesnt move......
It realy works!!!
Forgot to hard reset phone.....
But some of icons and settings are in russian....
When can we expect full english version? With all neccesary apps?
how can I buy full version? English version?
What is the difference between this and full payed version?
Thank you
You can try change name, the shortcuts in Windows\start menu ; And You can install resco explorer 2007 or my favorite Total Comander with reg plugin and You can copy to windows "wrlsmgr.exe" <-- wirless manager
And that's it the phone is english in 99% I work to run BT but not result, I search in reg keys. In this rom I not found few file BT, and few keys...
Thanks for the feedback, i just uploaded an small update that fixes the Homescreen Media panel, resizes to fit the phone screen(so is smaller lol) and fixes other things.. I wish we could get the final version, but the russian people who build it, neither they release the tools, nor a free update.
I'm working too, damian0429 about the bluetooth thing, but i think is impossible, as the files that managed bluetooth, have been modified to avoid being used, (I compared the file sizes with the ones of the original wm6 rom, the wm6.1 files are smaller) but i want to know if is possible to copy and replace this bluetooth .exes, and .dll's if they are in the ROM. Someone knows how? PM me if you found something
OK,
But, can someone who speaks russian contact people who did this hack and ask them how can we buy final version?
After all, this is rather old phone, maybe they could release this hack to public for free....
What do you say....?
diego930 said:
Thanks for the feedback, i just uploaded an small update that fixes the Homescreen Media panel, resizes to fit the phone screen(so is smaller lol) and fixes other things.. I wish we could get the final version, but the russian people who build it, neither they release the tools, nor a free update.
I'm working too, damian0429 about the bluetooth thing, but i think is impossible, as the files that managed bluetooth, have been modified to avoid being used, (I compared the file sizes with the ones of the original wm6 rom, the wm6.1 files are smaller) but i want to know if is possible to copy and replace this bluetooth .exes, and .dll's if they are in the ROM. Someone knows how? PM me if you found something
Click to expand...
Click to collapse
Could You send me Your homescreen? Maybe bluetooh is disable in radio this rom. And we coundn't turn on.
I reinstalled wm6.0
I will install 6.1 again if full version is released
My SKU its: FA9060AA#ACB
whats its the problem, if my phone is an ipaq 510 voicemessenger?
any solution??
mikaualam said:
My SKU its: FA9060AA#ACB
whats its the problem, if my phone is an ipaq 510 voicemessenger?
any solution??
Click to expand...
Click to collapse
Use this HpRUU hack, just unzip this archive into the folder in said in the instructions. ROMUpdate(taken from the Sku rom update hack thread)
Can someone contact Silix or strik3r and ask them about final version?
Or, can you give their address to me, I will contact them.
What are functionalities of final version?
porga said:
Can someone contact Silix or strik3r and ask them about final version?
Or, can you give their address to me, I will contact them.
What are functionalities of final version?
Click to expand...
Click to collapse
The final version includes Bluetooth and WiFi working, but it's paid
MghtyMax 1.9.1 "What a Feeling"
SIGNED VERSION NOW LIVE!!!!
THIS IS A CUPCAKE HERO ROM. AT PRESENT 1.9.1 IS STILL THE LATEST VERSION OF MGHTYMAX. IN MY OPINION, STILL THE FASTEST, MOST STABLE HERO ROM ON THE PLANET.
***NEWS***
I may be developing a "Legacy Edition" of MghtyMax, considering we are reaching the end of the road for the G1. It would essentially be 1.9.1 with minor tweeks, some graphical improvements, and some special goodies to celebrate life of a great phone. Kind of in the "feeling out interest" phase right now, so if this is something you would like to see, please respond. I'd also like to talk to some folks who are good with custom desktop wallpapers. Please contact me on Twitter if interested in working on this project.
Changelog:
1.9.1 - Added Flash support
1.9 Altered user.conf. Turned off Compache and went to straight linux-swap. Swappiness set at 60. This may be the FASTEST HERO ROM EVER.
Recommended linux-swap partition sizes:
G1: 128 MB Linux Swap
MT3G: 96 MB Linux Swap* (Not tested. If running laggy after rom settles try 128MB as well)
If you get the blurries on MT3G, use the blurries fix:
http://twistedumbrella.slackdev.com/Deport-1.0.zip
After the system settles, and everything is running nice and smoothly, shut down, reboot into recovery and flash this as a ROM. Don't wipe, don't remove partitions. Just flash the zip. Reboot, and no more blurries!
1.8:
*This IS Maxisma 1.8 with the following changes:
Brought back PEEP due to popular demand (as is in Maxisma's roms)
Include Backup for Root & Missed Calls apps, and a few added sounds.
Modded build.prop to allow use of T-Mo apps (My Account, My Faves)
1.7.1a:
Removed HeroLED. All LED's will work natively on MT3G, and on G1 all will work except *missed call notifications. Thanks to Maxisma's build.prop
*Included Anon's Missed Call. Allows for custom LED color and frequency for incoming/missed call notification, and missed call notification sounds. This app will be in your app draw, and it must be run and set up for missed call notification LEDs to work. MT3G users do not need to use this app.
Included Blackgin's "Backup for Root Users" (This version works with HERO rom's)
Added lots of sound files for Ringtones, Notifications, and Alarm.
This version has an edited build.prop so that the phone's model number displays as T-Mobile G1 for apps like T-Mobile's "My Account" Although this has not been tested on MT3G it should not cause any issues. Please report if there are and I will release a MT3G version of this rom.
Replaced boot sound and image files.
Removed HTC PEEP. (was causing problems for me, lots of FC)
Thanks go out to Maxisma of course for compiling the rom that I basically just tweeked a bit, and for allowing me to share it with all of you. Anon for his Missed Call app, Blackgin for "Backup for Root Users", HTCPedia and Rapidshare for hosting, everyone at XDA and the T-Mobile forums, JackCrackerMan for pointing me to the blurry fix, and of course all of you, the Android community at large.
***BEFORE INSTALLING PLEASE***
***THESE INSTRUCTIONS MUST BE FOLLOWED TO THE LETTER OR MGHTYMAX WILL NOT WORK!!!***
-If using "Backup for Root" uninstall any heroled app you may be currently running before backing up.
-Before flashing this rom, WIPE PHONE/FACTORY DATA RESET, WIPE/REPARTITION EXT AND LINUX-SWAP in parted.(I recommend ext4 for best performance, 128MB Linux Swap for G1, 96 MB Linux Swap for MT3G)
-After repartition and upgrade of ext partition, exit parted and PULL BATTERY. Make sure device is not charging or hooked up to USB and put battery back in and boot to recovery.
-WIPE/FDR Phone AGAIN FOR SAFETY. Too many people having issues with remnants of old roms interfering with new ones. PLEASE follow this procedure exactly.
- Flash Rom.
-When the new rom boots and you get to the homescreen, allow some time for the apps2sd to catch up.
- IMPORTANT!!! Run Market. Accept the ToS. Exit Market.
- Run "Backup for root users" (also in app tray) if you ran it prior to flashing this rom, and restore your files.
- Wait. Wait. Wait. Sit and watch the apps pop up in the tray. Wait some more. Look, they're dancing! They keep moving! Wait. Wait. Wait. Grass growing? Wait. Wait Wait. Wait some more and when they finally stop moving around for good, close the app tray and reopen it. If it scrolls like butter, it's done. If it's laggy, wait, wait, wait. DO NOT RUN **ANYTHING** During this process!!! You may get FC's, load screens, and just may end up doing a wipe and reflash. Give it time. It will take a while, but you'll be glad when it's done.
- Run "Missed Calls" app in the app tray and set up your led notifications for missed/incoming calls.
Feedback/suggestions appreciated!
*As with any rom, you flash this at your own risk, neither I, Maxisma, these forums, your wireless carrier, or any being, living or dead in the known universe (except for you) will be held responsible should your damage or destroy your device in an attempt to flash/use this rom in any way.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
MghtyMax 1.9.1 "What a Feeling!" ---> http://htcpedia.com/forum/showthread.php?t=918
Just in case folks prefer the RAMHack for some reason, 1.7.1a is still available for download.
MghtyMax 1.7.1a --->http://htcpedia.com/forum/showthread.php?t=918
"Just when I thought I was out... THEY PULL ME BACK IN!!!"
I just couldn't let 1.8 be it, with the problems I was seeing with lag. I am very proud of 1.9, and think it just may be the fastest Hero Rom setup yet. I hope you think so too. Thank you again for your support!
Please share your thoughts/comments on this topic here, or to my twitter at http://twitter.com/mghtyred
Thank you all again for enjoying this ROM!
Finally My First Post!!!!
This Seems Amazing, I'll Try This Out
anybody try it out yet? how is it?
going to give this a try brb
Since its a hero rom im guessing we will need a class 6 sd card right?
[email protected]@ said:
Since its a hero rom im guessing we will need a class 6 sd card right?
Click to expand...
Click to collapse
Because of the memhack Maxisma is using in the rom, no it's not required since linux-swap isn't really used, but recommended for faster app loading in apps2sd.
Working Great for me so far!
No FC's at all on the Mytouch.
Only one FC i got so far was the one when you search for a Contact, but mighty is already aware of that.
Other than that no problems so far.
Using it on the G1 and it blazing fast and holy sh** the LEDS work amazing!
Way to go Maxisma and Mighty!
If I'm coming from Max 1.7.1 do I need to wipe before flashing on my mt3g?
i followed directions and it boots up to mighty max screen and keeps booting to that same page. what next?
rizoh66 said:
If I'm coming from Max 1.7.1 do I need to wipe before flashing on my mt3g?
Click to expand...
Click to collapse
Absolutely. Follow the instructions to the T.
badaphooko01 said:
i followed directions and it boots up to mighty max screen and keeps booting to that same page. what next?
Click to expand...
Click to collapse
Clarification needed:
Are you getting a boot loop? Hero->HTC->MghtyMax->Hero->HTC->MghtyMax- etc,etc?
Or are you stuck on the MghtyMax screen?
mghtyred said:
Clarification needed:
Are you getting a boot loop? Hero->HTC->MghtyMax->Hero->HTC->MghtyMax- etc,etc?
Or are you stuck on the MghtyMax screen?
Click to expand...
Click to collapse
im sorry yes, its a boot loop
im wiping again and reflashing
Make all of this fit in 90 MB (death spl system) and I'll be impressed. I'll give it a try, though, maybe this one's worth my while, but the back of my mind is saying "Meh, another hero...)...
ok, let me tell you what steps i took before i flashed.
1.using Ra recovery. I wiped ext2 part
2. wiped/reset
3.repartioned fat/ext2/linux swap
4.upgraded to ext3
5.rebooted to g1 screen
6.pulled battery and removed sd card
7.copied rom to sd card
8.booted into recovery
9.wiped again
10.flashed rom
11.stuck in "might max" boot loop
mghtyred said:
Absolutely. Follow the instructions to the T.
Click to expand...
Click to collapse
Im sorry, I have one more question. Do I still need to partition my sd if im on the mt3g?
badaphooko01 said:
ok, let me tell you what steps i took before i flashed.
1.using Ra recovery. I wiped ext2 part
2. wiped/reset
3.repartioned fat/ext2/linux swap
4.upgraded to ext3
5.rebooted to g1 screen
6.pulled battery and removed sd card
7.copied rom to sd card
8.booted into recovery
9.wiped again
10.flashed rom
11.stuck in "might max" boot loop
Click to expand...
Click to collapse
Wow. That's your problem. Try it again using my EXACT process. I mean EXACT. If you do it EXACTLY as I posted it, you will have no problems. Start from the beginning and do it again.
rizoh66 said:
Im sorry, I have one more question. Do I still need to partition my sd if im on the mt3g?
Click to expand...
Click to collapse
As mentioned previously in the first post, in order for this rom to work on your phone, you need to follow the instructions I posted TO THE LETTER.
Yes you still need to partition your SD.
Read above to see what happens when you don't do exactly what is posted.
I have an extra 1GB class 2 or 4? SD card that I can use for this. And I want
to try it but I'm wondering.. is it good to be used as a daily driver? Is it as fast
or almost as fast as CM?
Geek For Me is proud to release:
Fresh Toast v2.1 by toastcfh and flipz
Come and get it!
Preface: I just want to remind everyone that Fresh Rom and Fresh Toast are two separate roms.... sort of. Fresh Rom is considered totally stable (as stable as can be at least). Fresh Toast uses Fresh Rom as it's base but adds in a custom kernel by toast and all kinds of goodies. This could potentially make your phone AWESOME-O, but it's with the understanding that it is more of a development rom. However it is considered extremely stable. At this time you can flash between Fresh Rom 2.1 and Fresh Toast 2.1 without wiping. Just make sure you disable setcpu or oc widget if you go back to Fresh Rom.
A note on slowness: It is coming to our attention that there are several bugs in the latest Sprint 2.27.651.5 RUU which is the official Sprint release. It doesn't surprise me that there are bugs considering our original 1.5 had plenty. The main one that we have come across is a service called com.htc.bg that sucks up your processor. This causes that phone to become extremely laggy and overall run like crap. Go read my new FAQ: Why is my Android phone running so slow? to see what you can do about it, and to report the issue. Keep in mind that this would be a Sprint bug and not Fresh Rom / Fresh Toast.
Overclock Widget vs SetCPU: Up until now toast and I have been pushing SetCPU because it allows us to create a custom file that tells it what clock speeds the rom is capable of running at which makes things nice and easy. However a couple of bugs have come up lately. First off is that it is constantly using 10-15% of the processor when it shouldn't even be doing anything. That doesn't sound like a lot but that's pretty extreme. The second issue is that it doesn't seem to be honoring the settings you pick. I could tell it that I want the minimum to be 245mhz but I would catch it at 19mhz. Or vice-versa I tell it that I want the max to be 650mhz and I catch it at 767mhz. With that said, toast took the time to program settings in to the kernel that will now allow you to pick "automatic" off of the device selection rather than custom. This may resolve the issue, so just keep an eye out for it if you use SetCPU. In OC Widget just go in to settings and click "Detect frequencies" to have it read them. If you have no preference then I'm personally saying to use Overclock Widget. It isn't quite as user friendly as SetCPU, but it gets the job done right. Additionally as a 3rd reminder: make sure if you are running Fresh Toast that you DO use one of these applications, and if you are running Fresh Rom that DO NOT run one of these. Doing so can cause slowdowns.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
And now it's time for serious business!
Features:
Built off of Fresh Rom 2.1.1 so all features of it are in this rom (brand new 2.27.651.5 RUU base).
Toastcfh's custom .29 kernel including:
Brain f**k scheduler (BFS)
Overclock scaling from 245mhz - 767mhz
Compcache
Ramzswap
Ext4
Apps2sd 2.7 beta 7 custom built for us (it won't move cache by default at my request) thanks to tkirton
Fully working camera
Fully working light sensor
Fully working bottom lights
Dancing android boot screen by wrx4memp
Removed Launcher2 due to stability issues and replaced it with LauncherPro Beta (a vanilla launcher alternative that works perfectly so far. Please report if you have any issues).
Updated estrongs file explorer to v1.3.12
Updated market to v1713
Updated facebook to v1.2
Quickboot works... for those who use it!
A special thanks goes out to all the donators who have been testing this release and helped us find a number of bugs. And of course for helping fund the server costs and coffee addictions.
What to expect / how to flash it / READ THIS :
Download and copy the zip to the root of your sdcard
Reboot to RA and do a data wipe / factory reset (Should not be required if currently running Fresh Rom 2.1.1 or Fresh Toast 2.1 Beta 1. However if you have any issues after flashing and you didn't wipe... then wipe!)
You may also need to wipe sd:ext if you are having troubles booting.
Pick flash zip from sdcard and select fresh-toast-v21-heroc.zip
After it finishes flashing reboot. Expect the first boot up to take a bit.
If it freezes during first boot*then wipe everything including SD:Ext Partition. This will delete all apps off your sdcard. You will want to reflash the rom if you have to do this or else you will be missing some apps from the rom. Note that if you are using ext4 then you will need to either re-partition your card or use Godspeed RA to properly wipe ext4. AmonRA will wipe it without errors but it can't actually read ext4 to wipe it.
When the phone boots and comes to the user setup screen I would recommend syncing your google account right away. I noticed an old bug creep back in where it gets stuck during sync. This seems to be avoided by adding your google account during setup.
DOWNLOAD: http://geekfor.me/new-release/fresh-toast-v21
RADIO:http://geekfor.me/radio/radio-242010427
Screenshots:
Blah
Mine! Just in case.
The wait is over...good looks flipz..
Oh man why do I have to work today, I want to put this through it's paces.
Great work flipz, toast, and everyone else who helped put this together!
And here we go...
LOL feels like Christmas used to all over again....and i'm f'n 28!
I literally stopped mid-flash of another ROM to d/l this
pwrmedia said:
LOL feels like Christmas used to all over again....and i'm f'n 28!
I literally stopped mid-flash of another ROM to d/l this
Click to expand...
Click to collapse
Me too...lol. Will report back results in a few...
good stuff, muy excellente
Great. Now I get to be late for work
Ok, now maybe SetCPU will actually let me 768MHz!
SamXp said:
Ok, now maybe SetCPU will actually let me 768MHz!
Click to expand...
Click to collapse
Just make sure you aren't selecting the Hero as your device because setcpu doesn't understand that. Either pick automatic or custom all the way at the bottom.
Thank You Flipzmode & Crew and cheers to all the excellant Devs of XDA
I have been spending every spare minute the past 5 months logged on to XDA and Geekfor.me. I am Slowly becoming a novice I like to think, and wanted to thank Flipz and his crew for making it such an enjoyable and very addictive experience thus far. I know you hear it alot, Flipz you are appreciated more than you may ever know amd you are " The Man of the CDMA Hero Forums". Cheers to all the excallant Devs of XDA.
Downloading now. I'm at work so it'll be a bit. I'll test flashing over 2.1b1 and report back.
Will this version leave the PRI alone? I'm currently running PRI 2.11 (so USB tether works) not 1.70_003 and would prefer to leave it that way. I know one your previous roms changed out the PRI.
ItsDon said:
Will this version leave the PRI alone? I'm currently running PRI 2.11 (so USB tether works) not 1.70_003 and would prefer to leave it that way. I know one your previous roms changed out the PRI.
Click to expand...
Click to collapse
It won't touch your PRI.
Is setcpu supposed to be included or do I have to D/L it?
Not going so good so far - wiped and flashed and it froze and rebooted trying to type in my login for gmail in the initial set up, so I wiped and flashed it again and it froze again trying to hit next on the initial set up. Redownloaded and going to wipe and flash again, see if it was just a bad download...
flipzmode said:
Just make sure you aren't selecting the Hero as your device because setcpu doesn't understand that. Either pick automatic or custom all the way at the bottom.
Click to expand...
Click to collapse
Ok, picked autodetect and it does allow 768MHz but LongBench was 15163ms. Hmmm
Re: [ROM] 05/18/10 | Fresh Toast v2.1 | BFS + Overclock + EXT4 | Newest RUU
What's the benefit or necessity of doing the radio from the link?
Edit: nm, I found the answer on the geek for me download page.
-------------------------------------
Sent via the XDA Tapatalk App
Looking good.
Can we flash any of your vanilla lock fixes over this ?