ELFin Windows Mobile 6.1 Official - TrueG Customized
4th Edition (Download links below)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
TrueG v4 Now Available!
The Following Changes have been made:
Removed Cyberon Voice Speed Dial (replaced with MS Voice Command)
Removed link to WM Task Manger (replaced with FdcSoft Task Manager v3.1)
Updated GoogleMaps to version 2.2.0.20
Updated JBed to version 20080912_5_1
Changed default Short Date format (as seen in first screen shot)
Everything else from v3 remains the same.......
TrueG v3 has the following features:
ELFin WM 6.1 3.10.710.0 Base
includes everything from the official release with the following changes.....
-removed JBlend
-removed VoiceCommander
-removed application security (thanks to ayyu3m)
-removed SQM (Customer Experience) (no2chem)
-added JBed (from Blackstone)
-added VoiceDialer (from Blackstone)
-added RemoteDesktopMobile
-added BlueTooth Explorer (from Opal)
-upgraded .Net to 3.5
-fixed TouchFlo 'Butterfinger effect'
Bonus for Rogers customers:
-enabled Rogers CNAP (caller name presentation - for those who subscribe to it)
-added Rogers Store certificates
-updated IE User Agent to support Rogers Mall
This should work on an ELF, but it was designed with the ELFin in mind, so it uses a lot of system and program memory.
PagePool:
ELFin 12 MB
ELF 8 MB
Memory Stats (after soft reset) - see screen shot above
Installation:
I have included the flashing utility from Hybrid Kitchen. If you go to the RUU folder and open ROMUpdateUtility it will automatically load up my RUU_Signed.nbh and flash it for you. This utility is not for unlocking and you must have your device unlocked ahead of time (see link below). Ignore warning about flashing only with a white screen (assuming you have a USPL)
For a quicker way to flash your device, rename the RUU_Signed.nbh to ELF0IMG.nbh and copy it to the root of a FAT32 formated SD card. Assuming your device is unlocked USPL (3.07 or higher) you will be given the option to flash directly from the SD card in 1/10 the time it takes to flash over USB.
To unlock your device see this thread for SPL unlocking...
Hard-SPL - http://forum.xda-developers.com/showthread.php?t=445666
USPL - http://forum.xda-developers.com/showthread.php?t=445666
Version 4 - Download here...
http://rapidshare.com/files/167760358/ELFin.TrueG.v4.7z
http://www.myunspace.com/?d=CF5EDE701
Version 3 - Download here....
http://rapidshare.com/files/165889496/ELFin.TrueG.v3.7z
http://www.myunspace.com/?d=624BBE311
Links to version 2 have been removed due to a bug in SD Encryption (it was enabled by default and could not be disabled)
Auto_Scroll_fix.cab was added for use with version 2, I will leave the attachment for anyone else who wants to use it.
Since I no longer own my HTC Touch I thought I would upload my source files so that anyone who wants to can rebuild/modify
it any way they want. Enjoy!
Version 4 Source Files....
http://www.myunspace.com/?d=44B27A391
Congrats on your first ROM!
keep up the good work trueg. i m sure you wud soon be aspired to release custom roms. and i hope so
now rogers user can say...ROGERS rock!!
hehe
Hey buddy,
Good job! Since you took out the OEMOPERATORS directory, you should probably include the Rogers.CAB that is floating around. It contains all the customization for the network. You can convert that to an OEM or include it as an attachment.
BTW You can credit ayyu3m (not me) for most of the porting tips
Actually, with this release the OEM directory was left as is (Rogers customizations and all). At one point I mentioned to you that I had tried it without the OEMOPERATORS folder but at that point I was just trying to figure out what different changes would do.
After I put it back in, I set out to find a WM 6.1 SYS. I tried the different SYS packages from the NIKE upgrading folder, but they all had things removed (I found out later that they can be downloaded separately). So I started looking for an official release that would be complete and came across the official upgrade from AT&T for the Tilt. Porting it was nice and easy with Hybrid Kitchen. =)
Hey guys,
I installed this rom after doing the CID unlock, and it went thru with no issues whatsoever. Ran for about 5mins or so flawlessly with 6.1, then it started this rebooting loop...where it will reboot every about 5mins. I've done hard resets and whatnot and the issue is still there. any help would be appreciated.
Cheers,
DiSkO
disk0 said:
Hey guys,
I installed this rom after doing the CID unlock, and it went thru with no issues whatsoever. Ran for about 5mins or so flawlessly with 6.1, then it started this rebooting loop...where it will reboot every about 5mins. I've done hard resets and whatnot and the issue is still there. any help would be appreciated.
Cheers,
DiSkO
Click to expand...
Click to collapse
trueg,
Which SYS did you use? I wonder if it is related to that ActiveSync spontaneous restart issue (every 5 minutes). Try using the Opal's 19971 SYS - that one is very stable in my opinion so far.
what do you mean by SYS? and where do i get this 19971 SYS?
disk0 said:
what do you mean by SYS? and where do i get this 19971 SYS?
Click to expand...
Click to collapse
It was actually directed at the creator; it's cooking-talk
I used the SYS from the official AT&T Tilt 6.1 release. I have not had any resets on my device, but I almost never use ActiveSync (My system is Linux based).
I imagine the Opal SYS is newer than the AT&T one, so I will gladly give it a shot. Does it include Microsoft Voice Command by chance? I needed to do a minor update anyway, the OEM folder has a registry entry that sets the default zoom in IE to 'larger' instead of 'normal'. Probably because it was meant for the older IE.
I guess I should add that I use the following IPL/SPL...
IPL: 2.27.0002
SPL: 2.28.0000
When I do run ActiveSync, it is within Windows XP.
Updated thread with new edition. =)
What's the difference between WWE and Canadian ?
Good work trueg, I'll try it out as soon as I finish using up both my Elfins for testing my own ROMs ;-)
Grant, there's a newer version of Jbed around - 20080610_2_1. The Blackstone version is only 20080418_2_1.
chihliouma said:
What's the difference between WWE and Canadian ?
Click to expand...
Click to collapse
It's not really a language difference. I added a few things specifically for Rogers/Fido customers, set the default region to English (Canada) and added only Canadian Cities as the default for the Weather Widget. I actually just changed the title so that it's less confusing.
dsixda said:
Grant, there's a newer version of Jbed around - 20080610_2_1. The Blackstone version is only 20080418_2_1.
Click to expand...
Click to collapse
Ya, I noticed that it was a bit older when I dumped it. I have 20080610 on my computer but I figured if it is good enough for Blackstone, it should be fine.
I suppose I can upgrade it if anyone really wants it.
trueg said:
Ya, I noticed that it was a bit older when I dumped it. I have 20080610 on my computer but I figured if it is good enough for Blackstone, it should be fine.
I suppose I can upgrade it if anyone really wants it.
Click to expand...
Click to collapse
Don't bother updating.. if it works then it's fine. Otherwise you'll get into the continuous loop of updating your ROM everytime there's a newer software, newer SYS, newer XIP.. and then it becomes a full-time job
dsixda said:
Don't bother updating.. if it works then it's fine. Otherwise you'll get into the continuous loop of updating your ROM everytime there's a newer software, newer SYS, newer XIP.. and then it becomes a full-time job
Click to expand...
Click to collapse
Don't I know it!
I could have went with a newer SYS and XIP and fixed any bugs, but since this was an official release I'm hoping that it has a fair amount of testing. I need to get off the cooking train; it has taken over way too much of my life. I'm hoping that this build will keep me happy for a while (or at least require a minimal amount of fixes).
trueg said:
Don't I know it!
I could have went with a newer SYS and XIP and fixed any bugs, but since this was an official release I'm hoping that it has a fair amount of testing. I need to get off the cooking train; it has taken over way too much of my life. I'm hoping that this build will keep me happy for a while (or at least require a minimal amount of fixes).
Click to expand...
Click to collapse
hehe. good choice bro. this gives an onset of new choices to users. as you my elite chef has decided to use builds that have been officially released and not the ones that came down from where ever. hehe
as said...a really good choice...and keep up the good work bro. now take a break...cos cooking needs time and focus and i have learned that, kinda hard way...even if you dont see any of my roms floating
lol...i jus cant stop writing...cos i wana say...i m really happy to see you going ahead. cos the other days i used to see you experimenting and trying to port builds...specially the syssy and xippy
people...trueg is an example of what a cook can aspire thru patience, learning and a keen choice
nice rom trueg your work appreciated
Related
As always the following rules apply with all of my roms except for the game part since the lite version do not include them..
====================================
Goals
Create a rom that will offer the following to end users.
Faster
Any body can build a rom faster than the stock one, but will it be more stable?
Looks slick
A phone that will have an interface your proud to show off to your family and friends.
Storage
Extra storage space in case you were not able to buy a sd card.
Easy to use
Comes with apps already install so people do not have to waste too much time downloading extra apps and etc.
Stable
A rom that you will not have to soft reset daily. Fixing common issues found with the original rom.
Fun
A rom with extra games so when your stuck some where and there is nothing to do, you can always play games.
====================================
There will be two versions:
Open Touch v4.0 UC
This one will be like the lite but with the following options.
1. UC added but with a twist, meaning it will not auto load, you will have the option to run it yourself.
2. Open Touch Cab Center = I'm going to include some commanly used cabs with the rom, you choose which ones you want and need.
3. Voice speed dial and voice command have been added and working.
Specs:
6MB Pagepool
45MB+ Storage and 26MB+ Programs - Due to Voice command
Open Touch v4.0 Biggy
Still listing
Snap shots
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
"2. Open Touch Cab Center = I'm going to include some commanly used cabs with the rom, you choose which ones you want and need."
Does this mean we can add any cab we want to the rom or we can only choose what cabs you have included? Keep up the good work.
Looking good. You may want to include the new radio in this rom.
dongo1 said:
"2. Open Touch Cab Center = I'm going to include some commanly used cabs with the rom, you choose which ones you want and need."
Does this mean we can add any cab we want to the rom or we can only choose what cabs you have included? Keep up the good work.
Click to expand...
Click to collapse
I've included commanly used cabs with this rom. You will simply go to Cabs Center and click to install the ones you need or want.
There will also be another option within the Cab Center for you to install cabs from your sd card.
JLine05 said:
Looking good. You may want to include the new radio in this rom.
Click to expand...
Click to collapse
Thanks bro,
Hey ttran
Whats the ETA?
thanks
mjo404 said:
Hey ttran
Whats the ETA?
thanks
Click to expand...
Click to collapse
I'm trying to have the beta ready for the beta team to test tomorrow.
I'm currently working on adding more cabs to the rom.
Great!! I am done with finals, now have time to play!!
i know...
its been asked but i just read a thread and it confused me, i have the 3.0 biggy on my device and used USPL for the rom, but now am i goin to need to need HardSPL to install this new rom since its not clean 'out of the box'...i read tht as long as ur IPL and SPL were above 4.0 then u can still use USPL to install...or am i completly wrong?
timace said:
its been asked but i just read a thread and it confused me, i have the 3.0 biggy on my device and used USPL for the rom, but now am i goin to need to need HardSPL to install this new rom since its not clean 'out of the box'...i read tht as long as ur IPL and SPL were above 4.0 then u can still use USPL to install...or am i completly wrong?
Click to expand...
Click to collapse
That's wrong information...
I don't like to force people to use HARD-SPL unless they want to.
I mean I could include it as a package and have people just become HARD-SPL without knowing, but that would be the wrong thing to do.
I know that the current installation process is kind of old but it's made for folks that do not wish to have their devices become HARD-SPL.
ttran001 said:
That's wrong information...
I don't like to force people to use HARD-SPL unless they want to.
I mean I could include it as a package and have people just become HARD-SPL without knowing, but that would be the wrong thing to do.
I know that the current installation process is kind of old but it's made for folks that do not wish to have their devices become HARD-SPL.
Click to expand...
Click to collapse
Awesome, thanks for your quick response and great work, cant wait...
I am a little confused.
so if i understand correctly.
in UC version after the install it will give us option which cabs to install right?
if that is the case isn't that going to affect the size of the installed rom and space after install is done
tipz said:
I am a little confused.
so if i understand correctly.
in UC version after the install it will give us option which cabs to install right?
if that is the case isn't that going to affect the size of the installed rom and space after install is done
Click to expand...
Click to collapse
You are correct, if you notice the program and storage space is less than the v3.0 lite, but not much..
There are two options, one is to install cabs already included in the rom, which will reduce some of the space.
Two install cabs from your own sd card to your sd card which will not effect the ram size.
In the original UC, you have to have your config file and cabs already on your sd card before flashing the rom. Since it will auto install after the flashing has completed. I've made it where you can use the UC option when your ready.
Looks good, i'm excited! i've been waiting to try and fix my phone till 4.0 was released.
Is there any way to have the theme the same color as the backround? It matches my wing PERFECTLY. I've been searching around for a navy blue-ish theme with no luck. Even if you can just provide a cab to have that nstead of the black htc theme would be great.
aad4321 said:
mabye i diddnt see the answer in the previous posts, but you said you are releasing a beta tonight? and when you do release beta, how long are you planing on keeping it beta untill you release the final version?
Click to expand...
Click to collapse
No,
I'm going to release the beta version only to the beta team tomorrow for testing. This takes a day or two depending on how many issues come up.
Once everything looks good I will then release it.
Regards,
will bbconnect work with this rom?
ttran001 said:
You are correct, if you notice the program and storage space is less than the v3.0 lite, but not much.
There are two options, one is to install cabs already included in the rom, which will reduce some of the space.
Two install cabs from your own sd card to your sd card which will not effect the ram size.
In the original UC, you have to have your config file and cabs already on your sd card before flashing the rom. Since it will auto install after the flashing has completed. I've made it where you can use the UC option when your ready.
Click to expand...
Click to collapse
I like that - so does this mean no more 5 - 7 hours installation process for me? That's about how long it takes for me to install from start to finish after flashing. I like the lite and slimeline versions btw.
i am waiting eagerly for this ROM.. if you are including voice speed dial, can you please make sure that registry entries and the voice command files are included ? secondly if possible can you please take care of the home screen not aligning correctly when switching from landscape to portrait
This is a guide to install the lastest wm6.1 firmware available free to your Ipaq 500/510/502/514 etc.
Windows Mobile 6.1 Lite Version by Silix
Screenshots:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Advantages:
Homescreen Panels
Fast and Lite version
Wifi Works!
SMS Threaded Mode
English and Russian
Internet Explorer updated
Resco Explorer as File Manager
Windows Player
Custom Load icon
Disadvantages:
Doesn't have bluetooth(could be add by using Tornato a2dp hack?)
No microsoft office(can be add later)
No Windows Live Messenger(can be add, see below)
It's not completly traslated to English(some Russian texts)
Guide
Read Carefully!
Download this files to your PC: SP38066, ROMUpdate.zip, HP514-V1RCL.7z(or Mirror 1)
Charge 100% your battery
Start SP38066.exe, continue until you see some files being extracted then when the HPRUU begins, cancel it.
Go to C/iPAQ/sp38066/ then extract there the contents of Test01.rar, it should replace some files there.
Start HPRUU.exe
Follow the process to install RUssian ROM
After sucessfull ROM upgrade, Extract the files of HP514V1RCL to the same directory, then replace the old .nbf file. Or erase the old one .nbf
Turn off your cellphone, then press left, down on the keypad while pressing the RED key to turn it on in bootloader mode.
Connect to the PC,Run HPRUU.exe again, it should install WM6.1 Lite version
It stops at 44%, make hardreset, if it cannot boot after reboot, you miss a step or something...
Add-ons:
CHome Update: Changes the default homescreen to fit the size of the screen, adds the wm6.1 boot image, and some little fixes, just run the .cab after installing WM6. HERE is the link.
Chome Config Program: Utility to configurate the CHome homescreen, you can add or remove tabs, etc. Just unzip and run it.Here
Contact Info/Buy full version
The full Wm6.1 ROM costs $10 and features bluetooth as the difference. You can download the ROM for free, but it will not boot up until you buy a key(that is device-specific). It must be paid through Yandex Money(a russian money system) that is very strange and nobody has a account there. lol There isn't great advantages from this ROM, and i hope the devs release it for free a new version, or the tools they used to create it.(our ipaqs are very old! they should give us a free ROM!)
Official full version Thread(in russian, use google translate)
English Thread with useful info
thanks to Silix, Strik3r developer of the ROM. And cingibi for the T9 files!
Please post if any issues.
I will upload Messenger, Office, and other programs.
rom need t9
t9 Chinese.cab (554KB)
t9 Czech.cab (462KB)
t9 Danish (399KB)
t9 Dutch.cab (399KB)
t9 English.cab (379KB)
t9 French.cab (390KB)
t9 Finnish (437KB)
t9 German.cab (393KB)
t9 Greek.cab (498KB)
t9 Hungarian.cab (459KB)
t9 Italian.cab (393KB)
t9 Norwegian.cab (399KB)
t9 Polski.cab (427KB)
t9 Portuguese.cab (387KB)
t9 Romanian.cab (404KB)
t9 Russian.cab (450KB)
t9 Slovak.cab (444KB)
t9 Spanish.cab (392KB)
t9 Swedish.cab (399KB)
t9 Thai.cab (377KB)
t9 Turkish.cab (471KB)
t9 Greek-English (377KB)
t9 Chinese by karhoe (4.28MB)
Hows about the full version anybody got getipaq device to make a key.txt id like to see the text and a already paid for key i wanna see if its crackable
I run Wifi, on BT I working yet, actually I see Bt in registry... but don't work yet. I working on it.
Sorry for my english.
I couldn't download HP514-V1RCL.7z on uploading.com. Would you please upload this to another host. Thanks so much!
donquichote said:
I couldn't download HP514-V1RCL.7z on uploading.com. Would you please upload this to another host. Thanks so much!
Click to expand...
Click to collapse
HP514V1RC1L.7z
Hi there people,
This is great project. I am from Croatia and I would like to have my HP514 with wm6.1 in english.
Can you please tell me when we can expect final version of update?
I tryed to perform update using this guide but updater responded with SKU ID error (Sku id is ABB)
Hi, You must use HACK SKU http://uploading.com/files/TZST6JPD/Test01.rar.html , when You write this rom, You must hard reset, and when he start first time spent to 5 min, and the keys don't work but You must wait this 5 min
OK, update wouldnt start with test01 Romupdate file. But I found Other roumupdate file (newer) on forum and run it with that file. Update run till 45 procent and then suddenly juped to finished.
After that i tryed to boot machine but it wont start.
Also, I tryed to run rom update again but update program says that it has problems comunicating with phone.....
On phone startup screen it says 2.05.00 0.76 (like before flash) and it doesnt move......
It realy works!!!
Forgot to hard reset phone.....
But some of icons and settings are in russian....
When can we expect full english version? With all neccesary apps?
how can I buy full version? English version?
What is the difference between this and full payed version?
Thank you
You can try change name, the shortcuts in Windows\start menu ; And You can install resco explorer 2007 or my favorite Total Comander with reg plugin and You can copy to windows "wrlsmgr.exe" <-- wirless manager
And that's it the phone is english in 99% I work to run BT but not result, I search in reg keys. In this rom I not found few file BT, and few keys...
Thanks for the feedback, i just uploaded an small update that fixes the Homescreen Media panel, resizes to fit the phone screen(so is smaller lol) and fixes other things.. I wish we could get the final version, but the russian people who build it, neither they release the tools, nor a free update.
I'm working too, damian0429 about the bluetooth thing, but i think is impossible, as the files that managed bluetooth, have been modified to avoid being used, (I compared the file sizes with the ones of the original wm6 rom, the wm6.1 files are smaller) but i want to know if is possible to copy and replace this bluetooth .exes, and .dll's if they are in the ROM. Someone knows how? PM me if you found something
OK,
But, can someone who speaks russian contact people who did this hack and ask them how can we buy final version?
After all, this is rather old phone, maybe they could release this hack to public for free....
What do you say....?
diego930 said:
Thanks for the feedback, i just uploaded an small update that fixes the Homescreen Media panel, resizes to fit the phone screen(so is smaller lol) and fixes other things.. I wish we could get the final version, but the russian people who build it, neither they release the tools, nor a free update.
I'm working too, damian0429 about the bluetooth thing, but i think is impossible, as the files that managed bluetooth, have been modified to avoid being used, (I compared the file sizes with the ones of the original wm6 rom, the wm6.1 files are smaller) but i want to know if is possible to copy and replace this bluetooth .exes, and .dll's if they are in the ROM. Someone knows how? PM me if you found something
Click to expand...
Click to collapse
Could You send me Your homescreen? Maybe bluetooh is disable in radio this rom. And we coundn't turn on.
I reinstalled wm6.0
I will install 6.1 again if full version is released
My SKU its: FA9060AA#ACB
whats its the problem, if my phone is an ipaq 510 voicemessenger?
any solution??
mikaualam said:
My SKU its: FA9060AA#ACB
whats its the problem, if my phone is an ipaq 510 voicemessenger?
any solution??
Click to expand...
Click to collapse
Use this HpRUU hack, just unzip this archive into the folder in said in the instructions. ROMUpdate(taken from the Sku rom update hack thread)
Can someone contact Silix or strik3r and ask them about final version?
Or, can you give their address to me, I will contact them.
What are functionalities of final version?
porga said:
Can someone contact Silix or strik3r and ask them about final version?
Or, can you give their address to me, I will contact them.
What are functionalities of final version?
Click to expand...
Click to collapse
The final version includes Bluetooth and WiFi working, but it's paid
Welcome to the 3VOLUTION SERIES SmartPhone ROM Kitchen!
3VOLUTION SERIES of Smartphone ROMS will give all new life to our new HTC devices. Outside of the smooth aesthetics, I Kept stability, scalability, flexibility, and speed in mind throughout the cooking process so you will not be disapointed!
When cooking, I focus primarily on the SmartPhone platform in an effort to optomize these great devices that are much overlooked. Feel free to post your comments or suggestions on making the ultimate SmartPhone ROM.
Latest build 3VO.3.50.122710!
I am glad I could be the first to cook a Custom ROM for this device! Thanks to JockyW and all who have been supporting and testing my ROMS. This ROM has proven itself to be very stable and solid up to date. This ROM flashes your phones Operating System and Splash screens only. Please flash and enjoy! Don't hesitate to ask questions in this forum as there are many great minds lurking here. However, it is encouraged to read the contents of this thread before posting questions that have more than likely already been answered. See screen shots below.
Included in the ROM:
Features (you speak, I listen!):
New 23137 Windows Mobile 6.5.X Standard core
CUSTOMIZATION CUSTOMIZATION!!
ROM Performance "tune up"
UI Tweaks and additional Settings added for FULL customization
Custom Phone Canvas
WM 6.5 3VOLUTION Custom Titanium Panels Layout
Many additional panels
Titanium Weather Panel (by Showaco, thanks!)
Option for Weather Icon on Clock Panel
Customized OEM packages
Customized splashes, backgrounds, canvas, and icons
New custom HTC Dialer canvas
Updated Settings and Scripts for better customization
Tegic XT9 with support for 12 languages
Custom 3VO Style Menus and Listviews
Programs and Applications:
HTC Album and Comm Manager
HTC Camera and Camcorder
Internet Explorer 6.0
JBED and Opera Mini 4.2
Skyfire Browser
CeleTask and CeleCmd (Celetask mapped to Inner Circle short press key)
Titanium Configurator
Titamiun Refresh
Office Mobile (including Pocket Word, Excel, and Powerpoint)
Office OneNote
Notepad
Windows Live (application and Titanium Panel)
Remote Desktop Client
VoIP
Voice Command
SIM Manager and Task Manager
USB to PC
Basehue
Resco Explorer and Resco Regedit
SIM tools (including threading toggler)
WM5torage
Start Menu View
Adobe Reader LE
ClockOnTop Application (Settings to enable or disable in Date/Time)
SMS Bubbles app (Thanks Samon)
Auto Keylock
RSS Hub
Light Config
3VO Keymap Changer (USA, UK, French)
NETCF 3.5
3VO Titanium Toggler (Toggle between Titanium Panels and Sliding Panels includes T-Mobile MyFaves)
3VO Transparent Wallpaper 2.50
3VO Button Customizer (Customize what your keys and buttons do)
ROM is Application unlocked
** HUGE thanks to JockyW. Without him, none of this would be possible! Thanks to all who contributed and helped build this ROM and XDA's amazing search engine!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Flashing instructions:
** note: HTC MAPLE DEVICES ONLY (Dash3G, HTC SNAP S52X)! Will NOT work on HTC OZONE or HTC SNAP S511!
** note: HARDSPL by JockyW HIGHLY RECOMMENDED!
** note: Your phone must be application unlocked. If it is not, please run SDA Application Unlock.exe via Activesync (attached below).
** note: If your device is not HardSPL (highly recommended, click here), you must verify which version SPL your device has prior to flashing. Do this by turning off the device. While holding the volume down button, power on the device. You will see "SPL-1.17" or "SPL-1.19". Run the appropriate auto-?.bat to JumpSPL your device for a successful flash.
** note: Please post questions and report bugs to thread, do not PM me with them.
Remove your SD Card
If your device is already hardSPL, proceed to step 10
If using JumpSPL, boot your device up to your homescreen
Download and unzip the ROM package file
If flashing a custom cooked ROM, run auto.bat, or auto_1.17.bat, or auto_1.19.bat (depending on your SPL version)
Follow the prompts in the DOS window
Hit "continue" (trackball button) on your phone, screen will turn black
Run RomUpdateUtility.exe (if it doesn't run via the script)
The flash will take about 5 minutes
If your device is already HardSPL, simply run RomUpdateUtility.exe and follow the prompts
Upon first boot, it will seem frozen for a few minutes, maybe even go black. This is NORMAL!
It is recommended to perform a hard reset (Clear Storage) after first boot
Enjoy!
In case something goes wrong:
Remove the battery and the SD Card--> Put ONLY the battery back in.
While holding the volume down button, press the power button
The multicolor bootloader screen will come up
Plug in the USB cable and flash back your original shipped ROM
Find out what went wrong and reflash this ROM properly
Check out my Flashing and Unbricking guide for more valuable information on flashing your Maple.
http://forum.xda-developers.com/showthread.php?p=4395614#post4395614
** note: These are not official shipped ROMS and I am NOT responsible for any damage it may cause to your device. ROM flalshing is meant for experienced users only. Please do your own research before updating. Please read all documentation and the contents of this thread before posting questions. Chances are, your question was already answered!
Changelog:
[Release 3.50 12-27-2010]
3VO.3.50.122710 Download Here <-- Download Now!
3VO.3.50.122710 Download SMS Patch
Changes and fixes:
Built on the WM 6.5.X 23137 core (seems very stable and fast)
Updated Office Mobile 2010
IE6 and IE5 installed in ROM (close one process before launching the other)
Now 4 browsers in ROM (IE5, IE6, Skyfire, Opera Mini)
Fixed many reported bugs
** Please install the attached 3VO_SMS_Patch.cab attached below after flash to fix SMS
[Release 3.00 4-10-2010]
3VO.3.00.041010 Download Here <-- Download Now!
Changes and fixes:
Built on the WM 6.5.3 23090 core
Much improved battery life
Fixed many reported bugs
Updated UI
[Release 2.50 11-25-2009]
3VO.2.50.112509 Download Here <-- Download Now!
Changes and fixes:
Built on the official 21854 core
Much improved battery life
Fixed many reported bugs
All new OEM packages
Updated UI
[Release 2.00 10-10-2009]
3VO.2.00.101009 Download Here <-- Download Now!
Changes and fixes:
Built on the stable 23004 core
Much improved battery life
Added missing shortcuts in Start Menu
Fixed many reported bugs
Added many packages
Updated UI
23004 core fixed many bugs
Screenshots of 3VO.2.00.101009:
Beta test roms
3VO BETA AREA
I will be posting BETA ROMS with newer development core in this post. Please check back weekly for updates.
Please be aware that ROM testing is for advanced users ONLY. I am not responsible for any damage ANY ROM could cause to your device. I will not and currently DO NOT provide support for ROMS. You will have to read the forums and search XDA to find answers to your problems. BETA ROMS and not meant for stability and daily use. BETA ROMS are meant only for bug testing and reporting. Flash at your own risk!
Flashing instructions:
** note: HTC MAPLE DEVICES ONLY (Dash3G, HTC SNAP S52X)! Will NOT work on HTC OZONE or HTC SNAP S511!
** note: HARDSPL by JockyW HIGHLY RECOMMENDED!
** note: Your phone must be application unlocked. If it is not, please run SDA Application Unlock.exe via Activesync (attached below).
** note: If your device is not HardSPL (highly recommended, click here), you must verify which version SPL your device has prior to flashing. Do this by turning off the device. While holding the volume down button, power on the device. You will see "SPL-1.17" or "SPL-1.19". Run the appropriate auto-?.bat to JumpSPL your device for a successful flash.
Remove your SD Card
If your device is already hardSPL, proceed to step 10
If using JumpSPL, boot your device up to your homescreen
Download and unzip the ROM package file
If flashing a custom cooked ROM, run auto.bat, or auto_1.17.bat, or auto_1.19.bat (depending on your SPL version)
Follow the prompts in the DOS window
Hit "continue" (trackball button) on your phone, screen will turn black
Run RomUpdateUtility.exe (if it doesn't run via the script)
The flash will take about 5 minutes
If your device is already HardSPL, simply run RomUpdateUtility.exe and follow the prompts
Upon first boot, it will seem frozen for a few minutes, maybe even go black. This is NORMAL!
Enjoy!
In case something goes wrong:
Remove the battery and the SD Card--> Put ONLY the battery back in.
While holding the volume down button, press the power button
The multicolor bootloader screen will come up
Plug in the USB cable and flash back your original shipped ROM
Find out what went wrong and reflash this ROM properly
Check out my Flashing and Unbricking guide for more valuable information on flashing your Maple.
http://forum.xda-developers.com/show...14#post4395614
** note: These are not official shipped ROMS and I am NOT responsible for any damage it may cause to your device. ROM flalshing is meant for experienced users only. Please do your own research before updating. Please read all documentation and the contents of this thread before posting questions. Chances are, your question was already answered!
Changelog:
[BETA TEST Release 2.60 12-10-2009]
3VO.2.60.121009 Download Here <-- Download Now!
Changes and fixes:
Built on the latest dev 28004 core
Much improved battery life
Updated UI and Activesync
NETCF 3.5 built in
Please test and report bugs
More info...
WOW you are fast. Great work! Out of curiosity (since what you do is simply pure magic to me), how difficult is it to make the rom work on the CDMA Ozone once you have the GSM one?
What technically speaking makes the roms incompatible?
great work Ookba..i kno u were itchin to get this done!
looks fantastic..what can i say
computerpro3 said:
WOW you are fast. Great work! Out of curiosity (since what you do is simply pure magic to me), how difficult is it to make the rom work on the CDMA Ozone once you have the GSM one?
What technically speaking makes the roms incompatible?
Click to expand...
Click to collapse
There are lots of variations between the Cedar and the Maple. But, as you know, it's all doable. Still trying to save up enough doe to grab me an Ozone. Once I do, it'll be a matter of days till you guys get a fresh digital meal... If anyone has a spare one laying around... By all means,send it my way... Thanks to all who have donated. Keep em coming. Almost there......
Well I dont really have much, but i I was able to scrounge around for a bit and send it over. Hopefully there are other people around with more dough than I that can help you get that ozone sooner than later.
Greate dude Thanks
Now what I need is a stock rom for S521 (keyboard with TAB key).
Just waiting for this so I can have my device back if something fails.
(I dumped my RAW files and post the links in the other thread)
and so it begins..
great job man!
I've flashed it... dude... it's beautiful!
The only problem 'til now is that the FN characters are not right.
If I press the FN + A, I should get '4', but I get '*', if I press FN + S, I get the '4' instead '5'.
Will set up mail etc trying to find any bug.
What is the 'Auto-lock' feature?
PS: using Snap as modem
[]'s
Cris
QuickGPS failed to download, anyone having same problem?
[]'s
Cris
Great job men..
How about battery performance for this ROM.??..any report..??
cpimentel said:
Greate dude Thanks
Now what I need is a stock rom for S521 (keyboard with TAB key).
Just waiting for this so I can have my device back if something fails.
(I dumped my RAW files and post the links in the other thread)
Click to expand...
Click to collapse
hey cpimentel. I created some stock ROMS for just that reason. You still have to JumpSPL or HardSPL but they are here. I will build another using your raw files shortly...
http://forum.xda-developers.com/showthread.php?t=550863
harunjo said:
Great job men..
How about battery performance for this ROM.??..any report..??
Click to expand...
Click to collapse
I went almost 3 days on my test Dash3G!! Phenomenal!!
cpimentel said:
I've flashed it... dude... it's beautiful!
The only problem 'til now is that the FN characters are not right.
If I press the FN + A, I should get '4', but I get '*', if I press FN + S, I get the '4' instead '5'.
Will set up mail etc trying to find any bug.
What is the 'Auto-lock' feature?
PS: using Snap as modem
[]'s
Cris
Click to expand...
Click to collapse
Great!! Thanks. I'm using a Keylock program by Maniac. Much better than the HTC one, even has custom notifications for messages waiting, screen saver, etc. Turn it on in Settings, UI Tweaks. Configure it in Start Menu, Tools.
As for the keyboard, the default layout is for the US WWE SNAP/Maple/Dash3G. Go to Start Menu, Tools, run Keymap Config and select EU keymap. It will work!!
QuickGPS needs some love, have to see why it's not working... I think it's cause I used the package from Dash3G and not SNAP. I will check.
cpimentel said:
QuickGPS failed to download, anyone having same problem?
[]'s
Cris
Click to expand...
Click to collapse
I fixed it. Instead of a patch, just redownload the ROM from the original link and reflash. Also fixed one other bug I forgot.
ookba said:
hey cpimentel. I created some stock ROMS for just that reason. You still have to JumpSPL or HardSPL but they are here. I will build another using your raw files shortly...
http://forum.xda-developers.com/showthread.php?t=550863
Click to expand...
Click to collapse
I see the same stock version as mine available to download, thanks dude
(I flashed without any backup rom... lol)
[]'s
Cris
ookba said:
I fixed it. Instead of a patch, just redownload the ROM from the original link and reflash. Also fixed one other bug I forgot.
Click to expand...
Click to collapse
U're my hero! =)
If you come to São Paulo/Brazil, tell me so I can pay more beers personally
Check the Alarms, I set 2 alarms yesterday (using the new setting Play sound circularly) and none played the sound (Alarm-WakeUp).
Will try is my CT-Alarm also works.
[]'s
Cris
hi. thanx for the ROM. I would like to confirmed that it worked liked a cham on my HTC Snap S526 from Singapore..
will make a donation for TS and JockyW
oh yah... the weather program included.. i am supposed to give a zip code or location code... does that mean its only applicable for US?
Geek For Me is proud to release:
Fresh Toast v2.1 by toastcfh and flipz
Come and get it!
Preface: I just want to remind everyone that Fresh Rom and Fresh Toast are two separate roms.... sort of. Fresh Rom is considered totally stable (as stable as can be at least). Fresh Toast uses Fresh Rom as it's base but adds in a custom kernel by toast and all kinds of goodies. This could potentially make your phone AWESOME-O, but it's with the understanding that it is more of a development rom. However it is considered extremely stable. At this time you can flash between Fresh Rom 2.1 and Fresh Toast 2.1 without wiping. Just make sure you disable setcpu or oc widget if you go back to Fresh Rom.
A note on slowness: It is coming to our attention that there are several bugs in the latest Sprint 2.27.651.5 RUU which is the official Sprint release. It doesn't surprise me that there are bugs considering our original 1.5 had plenty. The main one that we have come across is a service called com.htc.bg that sucks up your processor. This causes that phone to become extremely laggy and overall run like crap. Go read my new FAQ: Why is my Android phone running so slow? to see what you can do about it, and to report the issue. Keep in mind that this would be a Sprint bug and not Fresh Rom / Fresh Toast.
Overclock Widget vs SetCPU: Up until now toast and I have been pushing SetCPU because it allows us to create a custom file that tells it what clock speeds the rom is capable of running at which makes things nice and easy. However a couple of bugs have come up lately. First off is that it is constantly using 10-15% of the processor when it shouldn't even be doing anything. That doesn't sound like a lot but that's pretty extreme. The second issue is that it doesn't seem to be honoring the settings you pick. I could tell it that I want the minimum to be 245mhz but I would catch it at 19mhz. Or vice-versa I tell it that I want the max to be 650mhz and I catch it at 767mhz. With that said, toast took the time to program settings in to the kernel that will now allow you to pick "automatic" off of the device selection rather than custom. This may resolve the issue, so just keep an eye out for it if you use SetCPU. In OC Widget just go in to settings and click "Detect frequencies" to have it read them. If you have no preference then I'm personally saying to use Overclock Widget. It isn't quite as user friendly as SetCPU, but it gets the job done right. Additionally as a 3rd reminder: make sure if you are running Fresh Toast that you DO use one of these applications, and if you are running Fresh Rom that DO NOT run one of these. Doing so can cause slowdowns.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
And now it's time for serious business!
Features:
Built off of Fresh Rom 2.1.1 so all features of it are in this rom (brand new 2.27.651.5 RUU base).
Toastcfh's custom .29 kernel including:
Brain f**k scheduler (BFS)
Overclock scaling from 245mhz - 767mhz
Compcache
Ramzswap
Ext4
Apps2sd 2.7 beta 7 custom built for us (it won't move cache by default at my request) thanks to tkirton
Fully working camera
Fully working light sensor
Fully working bottom lights
Dancing android boot screen by wrx4memp
Removed Launcher2 due to stability issues and replaced it with LauncherPro Beta (a vanilla launcher alternative that works perfectly so far. Please report if you have any issues).
Updated estrongs file explorer to v1.3.12
Updated market to v1713
Updated facebook to v1.2
Quickboot works... for those who use it!
A special thanks goes out to all the donators who have been testing this release and helped us find a number of bugs. And of course for helping fund the server costs and coffee addictions.
What to expect / how to flash it / READ THIS :
Download and copy the zip to the root of your sdcard
Reboot to RA and do a data wipe / factory reset (Should not be required if currently running Fresh Rom 2.1.1 or Fresh Toast 2.1 Beta 1. However if you have any issues after flashing and you didn't wipe... then wipe!)
You may also need to wipe sd:ext if you are having troubles booting.
Pick flash zip from sdcard and select fresh-toast-v21-heroc.zip
After it finishes flashing reboot. Expect the first boot up to take a bit.
If it freezes during first boot*then wipe everything including SD:Ext Partition. This will delete all apps off your sdcard. You will want to reflash the rom if you have to do this or else you will be missing some apps from the rom. Note that if you are using ext4 then you will need to either re-partition your card or use Godspeed RA to properly wipe ext4. AmonRA will wipe it without errors but it can't actually read ext4 to wipe it.
When the phone boots and comes to the user setup screen I would recommend syncing your google account right away. I noticed an old bug creep back in where it gets stuck during sync. This seems to be avoided by adding your google account during setup.
DOWNLOAD: http://geekfor.me/new-release/fresh-toast-v21
RADIO:http://geekfor.me/radio/radio-242010427
Screenshots:
Blah
Mine! Just in case.
The wait is over...good looks flipz..
Oh man why do I have to work today, I want to put this through it's paces.
Great work flipz, toast, and everyone else who helped put this together!
And here we go...
LOL feels like Christmas used to all over again....and i'm f'n 28!
I literally stopped mid-flash of another ROM to d/l this
pwrmedia said:
LOL feels like Christmas used to all over again....and i'm f'n 28!
I literally stopped mid-flash of another ROM to d/l this
Click to expand...
Click to collapse
Me too...lol. Will report back results in a few...
good stuff, muy excellente
Great. Now I get to be late for work
Ok, now maybe SetCPU will actually let me 768MHz!
SamXp said:
Ok, now maybe SetCPU will actually let me 768MHz!
Click to expand...
Click to collapse
Just make sure you aren't selecting the Hero as your device because setcpu doesn't understand that. Either pick automatic or custom all the way at the bottom.
Thank You Flipzmode & Crew and cheers to all the excellant Devs of XDA
I have been spending every spare minute the past 5 months logged on to XDA and Geekfor.me. I am Slowly becoming a novice I like to think, and wanted to thank Flipz and his crew for making it such an enjoyable and very addictive experience thus far. I know you hear it alot, Flipz you are appreciated more than you may ever know amd you are " The Man of the CDMA Hero Forums". Cheers to all the excallant Devs of XDA.
Downloading now. I'm at work so it'll be a bit. I'll test flashing over 2.1b1 and report back.
Will this version leave the PRI alone? I'm currently running PRI 2.11 (so USB tether works) not 1.70_003 and would prefer to leave it that way. I know one your previous roms changed out the PRI.
ItsDon said:
Will this version leave the PRI alone? I'm currently running PRI 2.11 (so USB tether works) not 1.70_003 and would prefer to leave it that way. I know one your previous roms changed out the PRI.
Click to expand...
Click to collapse
It won't touch your PRI.
Is setcpu supposed to be included or do I have to D/L it?
Not going so good so far - wiped and flashed and it froze and rebooted trying to type in my login for gmail in the initial set up, so I wiped and flashed it again and it froze again trying to hit next on the initial set up. Redownloaded and going to wipe and flash again, see if it was just a bad download...
flipzmode said:
Just make sure you aren't selecting the Hero as your device because setcpu doesn't understand that. Either pick automatic or custom all the way at the bottom.
Click to expand...
Click to collapse
Ok, picked autodetect and it does allow 768MHz but LongBench was 15163ms. Hmmm
Re: [ROM] 05/18/10 | Fresh Toast v2.1 | BFS + Overclock + EXT4 | Newest RUU
What's the benefit or necessity of doing the radio from the link?
Edit: nm, I found the answer on the geek for me download page.
-------------------------------------
Sent via the XDA Tapatalk App
Looking good.
Can we flash any of your vanilla lock fixes over this ?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Minidoudou is available online! There is still work to do, but it is already fully functional and you can try it on to configure your own mod of CyanogenMod 6.1.0 for HTC Dream / Sapphire.
Try it on here: http://minidoudou.joelcogen.com
and let me know what you think!
Todo (in the order it will be done, probably)
- Connect to an external storage provider (sendspace)
- Make it pretty
- Fix IE UI issues
- Add system/data option, with a nice drag&drop
- Add advanced mode, with moving of any APK in the ROM
- Display "hand" cursor on draggable elements
- Check /system size
- Fix changes application order
- Add deprecation to APKs
- Users management for contributors
- Select field for mutually exclusive packages (kernel)
- Fix double upload issue
- Whatever you suggest below
There has already been some discussion about how much control to include, so here is a first poll: How much control would you like when using Minidoudou?
I'm not sure if it's the rom or my phone,
But I've used your rom, and ir worked great.
When I walked trough the city that evening
I was looking for wifi (without passwords) when I found one,
I tried to connect, but it only said, getting IP adress, connecting and again getting IP,...
Even on my home wifi I had this problem. So i did a full wipe and reinstalled the minimou Final version.
Can you please tell me if this is rom based or just bad luck with the wifi on my phone?
And you are doing a great job, I also tried smoki rom, but it had some lag on the UI.
It would be nice aswell if we could put custom icons (of the topbar) and custom battery Icon
milowke said:
I was looking for wifi (without passwords) when I found one,
I tried to connect, but it only said, getting IP adress, connecting and again getting IP,...
Even on my home wifi I had this problem. So i did a full wipe and reinstalled the minimou Final version.
Click to expand...
Click to collapse
Hi,
You're the first to report wifi problems, so I'll look into it.
As for the icons, it might be hard because that means customizing the theme, something I don't have a lot of luck with. I'm keeping it in mind, and once it is stable and has most of its functionnalities regarding packages, I'll look into it or for a contributor with theming experience.
Thanks for your feedback!
jojotm said:
Hi,
You're the first to report wifi problems, so I'll look into it.
As for the icons, it might be hard because that means customizing the theme, something I don't have a lot of luck with. I'm keeping it in mind, and once it is stable and has most of its functionnalities regarding packages, I'll look into it or for a contributor with theming experience.
Thanks for your feedback!
Click to expand...
Click to collapse
Your welcome,
And Thank you for your work on this lovely rom.
I have made a new package on your website, and i'm going to use it again.
I'll report any issues I have
Not sure if I'm allowed to do this double post thing.
But when I tried to download the rom I found an issue.
Wen you click on download you get the link like this
http://minidoudou.joelcogen.com/download/MDD_HTC_Sapphire_CyanogenMod_610_RC1_Milow_Testingzip
So when you save it, it's just a file, no zip file
So you have to put a dot in front of the zip yourself
NOt sure if you noticed it
milowke said:
Wen you click on download you get the link like this
http://minidoudou.joelcogen.com/download/MDD_HTC_Sapphire_CyanogenMod_610_RC1_Milow_Testingzip
Click to expand...
Click to collapse
Didn't notice that. It's fixed.
Sent from my HTC Magic using XDA App
Hi
I have done a clean install of minimou final, and after it I did the install of
the minidoudou. But it seems to have an endless boot up
It's stuck on the Proximus logo for 15 minutes now.
I have the following things in my minidoudou:
Advanced Task Killer 1.9.3
Browser CM6.1.0-RC1
StopWatch & Timer 1.15
aNetShare (wireless tethering) 2.30
Twitter 1.0.5
XDA developers 1.3.2
Gapps MDPI MDD 2010.10.20
Facebook 1.4.0
Sapphire 32A kernel - Brian Crook Nightly 231
Barcode Scanner 3.5
LauncherPro 0.8.1.1
Email CM6.1.0-RC1
I have the same SPL, RADIO, HBOOT as you I only use another recovery
RA magic v1.7.0.1
Whats wrong on this ?
*EDIT*
I will try to do just a clean install of minidoudou, without extra apps
But i'm wondering, Do I need to install minimou final and than install the minidoudou?
OK I did a full wipe
and I installed the minidoudou,
this package:
Gapps MDPI MDD 2010.10.20
Sapphire 32A kernel - Brian Crook Nightly 231
LauncherPro 0.8.1.1
On the wizard, I had to connect to WIFI for the google account.
Well It found my wifi, typed in the password, but it was the same
Retrieving IP adress
remember
Connecting
and it keeps repeating.
I installed minimou Final again, cause I realy need WIFI.
I'll try again if it's fixed.
milowke said:
I have done a clean install of minimou final, and after it I did the install of
the minidoudou. But it seems to have an endless boot up
It's stuck on the Proximus logo for 15 minutes now.
I will try to do just a clean install of minidoudou, without extra apps
But i'm wondering, Do I need to install minimou final and than install the minidoudou?
Click to expand...
Click to collapse
Hi again,
I just tried your config over a Minimou-final install (already with several of packages) and it seems to work.
It might be a LauncherPro problem, I remember it gave me trouble when building Minimou-final, so maybe flashing a non-upgraded Minimou with MDD causes the problem. Try fully upgrading your Minimou, then flashing MDD.
If it still doesn't work, the best solution is usually to do an 'adb logcat' (from the android sdk tools) to see the phone's log and look up the error message, or post the result here.
MDD is a separate project from Minimou, they're only link is me, so you don't need Minimou to flash, you can wipe from the recovery and then flash and it should work fine.
On the sidenote, in the future it would be easier if you just post your config name rather than the set of packages. It makes for shorter posts and it's easier to find (I compare the list to download your config).
Ok I did installed minimou final, and did the wizard thing,
Since launcher pro was expired I had to download the newest version.
When it was installed everything was working fine.
So I disabled wifi and let my phone forget my wifi settings.
After it I flashed MDD (Clean_without_Launcher(UPGRADE))
It took about 5-7 Minutes to boot,
I tried wifi, and it worked
I hope this info was helpfull for you.
Great! This LauncherPro problem is a real *****, I don't know why upgrading is such a problem.
The WiFi is stranger. I still have to look into it, I'll see if I can reproduce it.
jojotm said:
Great! This LauncherPro problem is a real *****, I don't know why upgrading is such a problem.
The WiFi is stranger. I still have to look into it, I'll see if I can reproduce it.
Click to expand...
Click to collapse
OKi, thnx.
Maybe it's just your launcherpro apk?
cause when I installed minimou final, installed launcherpro from the maker his website, and upgraded to MDD (without extra apps (no launcher as well), it worked fine, when I did the same but with launcher in the MDD package it failed at the wifi connection.
Even a clean install of MDD with launcher (cause you need one) failed so.
NOt sure if it's the same with the AWD launcher.
Anyone happen to have problems with gps? 2 of my apps (Sygic and iGO) are crashing after moving to RC1. I don't blame minidoudou but just wanted to see if i'm the only one. I'm running bcrooks kernel.
saibot64 said:
Anyone happen to have problems with gps? 2 of my apps (Sygic and iGO) are crashing after moving to RC1. I don't blame minidoudou but just wanted to see if i'm the only one. I'm running bcrooks kernel.
Click to expand...
Click to collapse
Uhm, I didn't tried the GPS yet.
Do they crash when you open the app or when you are using it for a couple minutes?
Sygic freezes when i want to create a rather long (1k KM) route.. so i think it's Sygic's fault. It might not be compatible with 2.2.1. I'll try some other software as 'gps essentials' appears to be working fine.
On another note i cannot install brut's google maps... tried removing the original google maps, they're SapphireMaps package?
Thanks in advance for any help.
saibot64 said:
Sygic freezes when i want to create a rather long (1k KM) route.. so i think it's Sygic's fault. It might not be compatible with 2.2.1. I'll try some other software as 'gps essentials' appears to be working fine.
On another note i cannot install brut's google maps... tried removing the original google maps, they're SapphireMaps package?
Thanks in advance for any help.
Click to expand...
Click to collapse
Well I tried Navigon and it worked fine, couldn't try Sygic's GPS cause it needed 3D acceleration.
You can't remove the original google maps indeed. they are in the package.
As for the brut's google maps, you should look over here
http://forum.xda-developers.com/showthread.php?t=630887
try this one: maps4.6.0.4686-brut-renamed.apk
Same here, I only tried Google Navigation and it worked fine.
Regarding Maps, you can't remove them because they are in /system, but I'll add the option to install in /data to MDD soon. I remember having trouble updating it in the past, but I don't see why, because other /system packages can usually be updated just fine....
Hello, i tried to cook a rom yesterday using minidoudou but it still says "Pending" along with some others!
Also when i press on "x packages" to see what packages other roms include, i get an error with firefox 3.6.12. With chrome there is no such problem.
Thanks again for the great work.
I like this idea a lot. Kudos to the developer(s).
Can we add different devices? Per say the G1?