Database Info

Swedish hardware keyboard error

I was wondering if anyone can help me with my Swedish hardware keyboard mapping? I downloaded the cooked wm6rom but my keybord doesnt work right on the fn +key. The layout on the orginal swedish keyboard is in this link on page 50 http://www.htc.com/support/pdf/htcty...Manual_web.pdf I want to map my keys as it shows on the link, how shall I do that?

Hi there, I wonder if you've managed to find out what the hex key for swedish is?

I found the list of all languages at: http://www.microsoft.com/globaldev/reference/winxp/xp-lcid.mspx
... and inserted "1053" for swedish, but this didn't help, my hardware keyboard is still messed up. Anyone got another hint?

I beleave i can make a CAB to let you use sweden dictionary and keyboard map correctly...
I'l do when i have some time and post here http://forum.xda-developers.com/showpost.php?p=1673274&postcount=2
Cheers.

jcespi2005, that would be most kind of you. Many thanks in advance!
Edit: jcespi2005 - I tried with the norwegian keyboard instead, and that did the job! Thank you very much anyhoo.

mape78 said:
I found the list of all languages at: http://www.microsoft.com/globaldev/reference/winxp/xp-lcid.mspx
... and inserted "1053" for swedish, but this didn't help, my hardware keyboard is still messed up. Anyone got another hint?
Click to expand...
Click to collapse
HKEY_LOCAL_MACHINE\HARDWARE\DEVICEMAP\KEYBD\CurLang 1044 to get Swedish keyboard

Added the CAB here http://forum.xda-developers.com/showpost.php?p=1673274&postcount=2
Can someone test it and say me if works.... thanks....

jcespi2005 said:
Added the CAB here http://forum.xda-developers.com/showpost.php?p=1673274&postcount=2
Can someone test it and say me if works.... thanks....
Click to expand...
Click to collapse
I have tested it and it does not work, it makes the CurLang value in the registry to 1053, and even though that is Swedish it does not work. My Swedish Tytn II arrived with that value set to 1044 - norwegian bokmål. When setting it to that value it works. So the keyboard does not work, but the dictionary seems to be Swedish and is working So just a small adjustement and it will be fine

easycure1974 said:
I have tested it and it does not work, it makes the CurLang value in the registry to 1053, and even though that is Swedish it does not work. My Swedish Tytn II arrived with that value set to 1044 - norwegian bokmål. When setting it to that value it works. So the keyboard does not work, but the dictionary seems to be Swedish and is working So just a small adjustement and it will be fine
Click to expand...
Click to collapse
Many thanks again for testing work
You mean 0414 hex or 1044 dec i suppose... so the keyb is like Norwegian_Bokmal one in the sweden Kaiser
I correct the registry value and upload again....
Cheers.

jcespi2005 said:
Many thanks again for testing work
You mean 0414 hex or 1044 dec i suppose... so the keyb is like Norwegian_Bokmal one in the sweden Kaiser
I correct the registry value and upload again....
Cheers.
Click to expand...
Click to collapse
Now it is working fine
Even tough you Spaniards beated us Swedes in the soccergame yesterday I will forgive you because of you nice work here at XDA

easycure1974 said:
Now it is working fine
Even tough you Spaniards beated us Swedes in the soccergame yesterday I will forgive you because of you nice work here at XDA
Click to expand...
Click to collapse
Yes, great match, spanish players did a great work.... but is only football, you know, life is more than football
Thanks.

jcespi2005 said:
Yes, great match, spanish players did a great work.... but is only football, you know, life is more than football
Thanks.
Click to expand...
Click to collapse
I can nothing more than agree on all abowe

Thank u jcespi2005 for your great work with our language settings. Will your cab's also change the software keyboard to the selected language?

mape78 said:
Thank u jcespi2005 for your great work with our language settings. Will your cab's also change the software keyboard to the selected language?
Click to expand...
Click to collapse
Nop, only hardware keyboard. For soft keyboard ussually used the Resco Keyboard with multilanguaje support.
I'll take a look to see if is easy change the soft keyboard replacing some DLLs...
Cheers.

mape78 said:
Thank u jcespi2005 for your great work with our language settings. Will your cab's also change the software keyboard to the selected language?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=1150091&postcount=97
use this to get free Swedish software keyboard

jcespi2005 said:
Nop, only hardware keyboard. For soft keyboard ussually used the Resco Keyboard with multilanguaje support.
I'll take a look to see if is easy change the soft keyboard replacing some DLLs...
Cheers.
Click to expand...
Click to collapse
hello jcespi2005! can you help with similar problem on keyboard layout. i flashed docomo ht-01a to english rom but keyboard layout is messed up. your help will be much appreciated. thank you in advance.

jcespi2005: Could you (if you have time) have a look at making a similar cab for the Samsung i780? The cab you did before doesnt do it, looks like the registry is setup otherwise
Would really appreciate this!!

BOUNTY! HTC Touch Keyboard/Keypad .cab w/Norwegian

Hi
There's a couple different HTC Touch keyboard/keypad .cabs floating about, but so far none with full support for my own language (Norwegian). I am a total newb when it comes to making cabs, but since there's already cabs out there with other linguas I can hardly believe it will be very difficult to make a cab with a few spesific languages.
So, here's deal. I will paypal this awesome bounty of 15$ aka "beer money" (not much but I'm unemployed, broke, my fiancé of 8 years and I just decided we'll go separate ways AND I'm horribly bored ) to the person who can make a .cab that installs the HTC Touch keyboard/keypad + English and Norwegian xt9 (additional languages might be an idea, but moderation please if you're really feeling like making a killer cab, size matters too) and so forth and makes it work on a Kaiser.
I will of course expect this .cab to be offered to the public through these forums.
You can find the dumped? files here that's needed (or so I believe).
www.mindovermadness.org/HTC_KeyBoard_DualOEM_multi.rar
Also, the .cab on Duttys FTP with the HTC Touch Keyboard that should be possible to break down for paths etc.
http://www.cinetsystems.com/xda/Kaiser Cab Collections/HTC Touch Keyboard + Keypad.cab
I hope someone will be so kind as to look into this and become my personal XDA hero. Also I am sorry if I somehow have misunderstood the concept of a bounty, offended anyone or offered a ridicilously low sum of money. I come from a land of ice and snow, my brain is numb and thats my excuse!
/Mac

I have tried to do fix that, I got a oem package with the norwegian files, even the scandinavian layout is in it.
But I have had no success, im no coder
But I upped the package, and if any guru will look into it, that would help alot

It must be pretty basic stuff, I figured I can make it work myself simply by some creative renaming and overwriting files on a previous install from one of the existing cabs, but its hardly viable when you flash your phone every week

Think I did it
I have managed to make an installable cab with english, danish, norwegian and swedish HTC Keyboard + Keypad layout, and with working xt9/t9 dictionaries. I have installed it on my own HTC Touch (P3450) and tested all four languages with success. When nordic languages are chosen, the keyboard (not keypad) have the nordic letters on them, so the bitmap files should be right as well.
OJ

Thank you If you want the bounty, pm me your paypal!

nice work, thx
one thing or two though
keypad dont display æøå but keyboard is workin perfectly
i dunno how to explain this correctly, but in textwriting æøå works (in keyboard) but when opening them ouside like in.ex programs folder, it show only english qwerty, any suggestions?
Many has been waiting for this, great work

I've discovered a number of bugs/glitches in this .cab, see the thread at
http://forum.smartmobil.no/viewtopic.php?f=79&t=9314&sid=20a938d71af92d67e43f1ac3be4242cb
Yet, should be "fixeable" I think.

if u install this over another version, it works better

tytn 2 with scandin keyboard
I havent found a solution to my problem.
Keyboard has ä (FN + L) and ö (FN + o).
I updated Rom to Schap's WM6 Pro 4.31 ROMs WWE and then ä and ö keys stopped working! help

itje said:
if u install this over another version, it works better
Click to expand...
Click to collapse
Kan du forklare hva du mener?
Can you explain what you ment by this?
Thanks!

I had posted these cabs for someone else who had wanted them in a previous post.**both cabs must be installed to the device** hope this is what your looking for.

KDKobes said:
I had posted these cabs for someone else who had wanted them in a previous post.**both cabs must be installed to the device** hope this is what your looking for.
Click to expand...
Click to collapse
Thanks!
I've been looking for sometihng like this ever since I tried Duttys great new rom. I'll give them a try next week, when I get my hands on my frends TyTN II, and report back.
Thanks a lot!!

Swedish keyboard
This is what i use for my Tytn .
and also the tilt keybord fix.

KDKobes said:
I had posted these cabs for someone else who had wanted them in a previous post.**both cabs must be installed to the device** hope this is what your looking for.
Click to expand...
Click to collapse
When i download that will my 16 work ok, but i have usede some cab's before but when my hardware keyboard on my dual write letters wrong when i press 2 i got e not a

KDKobes said:
I had posted these cabs for someone else who had wanted them in a previous post.**both cabs must be installed to the device** hope this is what your looking for.
Click to expand...
Click to collapse
Thanks a lot! I'm close to 100% on the keyboard issue.
Ok, this is what I've done:
Installed (in this order)
Scandanavian Keyboard.CAB
-Soft reset
Nordic Keypad Mapping.cab
-Soft reset
XDA_JCEspi2005_Norwegian_Input_Kaiser.cab
-Soft reset
Now the SIP keyboard layout are OK with æøå - working fine. I Had to install XDA_JCEspi2005_Norwegian_Input_Kaiser.cab to get my hardware keyboard right.
This issue remains: Word Completion is still in english. Any fix for that?
Also in Duttys newest ROM, the Touch Keyboard and Touch Keypad are without the Norwegian letters. Any cabs for this?
The Dr.

If you can go with the diamond keyboard try this
http://forum.xda-developers.com/showthread.php?t=392197
jobber endnå med at få keypad at fungera

Try this: Change Curlang to 414 (414 Hex, 1044 Dec). Search up Curlang in youre register (should be in: HKLM/Hardware/Devicemap/Keybd), Soft Reset. DONE! Youre Keyboard is now supporting ÆØÅ and all the oter keys and so on, just as you were use to on Norwegian Shipped/Stok Roms.

Thanks to you both!
I'll try this as soon as I get my hands on my "test Kaiser" again!
I'll report back.

raiisak said:
Try this: Change Curlang to 414 (414 Hex, 1044 Dec). Search up Curlang in youre register (should be in: HKLM/Hardware/Devicemap/Keybd), Soft Reset. DONE! Youre Keyboard is now supporting ÆØÅ and all the oter keys and so on, just as you were use to on Norwegian Shipped/Stok Roms.
Click to expand...
Click to collapse
I have just flashed Duttys May 22 ROM, and no ÆØÅ on the software keyboard. Any fix for this? (Will also post this in Duttys new thread)
Your reg hack worked, the HW keyboard is now norwegian
Thanks!

French keyboard
I search the version with the french keyboard.
Does somebody know a downloadlink?
That would be nice
Thank you for your helping hand in advance

French AZERTY Keyboard with WM6.1

Hi,
I've flashed to windows mobile 6.1 and am stuck with a QWERTY keyboard layout. How can I switch it to an AZERTY ? I've added the Local string that works for WM6 but it doesn't seem to in WM6.1. Any ideas or tricks I may have missed out whilst searching ?
Regards,
Axet

Hi !
I'm using schap's Advanced Configuration Tool to do it:
http://forum.xda-developers.com/showthread.php?t=359380
Bye

Just tried and it didn't work. Are you certain that you are using a WM 6.1 rom and not a WM6 rom ?

I install this soft too :
http://forum.xda-developers.com/showthread.php?t=345426
I'm using ROM 6.03 with Radio 1.64 and it works !!

Tried that too but it hasn't worked (yes, I have performed a soft reset on the phone after installing). My phone is running WM6.1, CE OS 5.2.19170 (Build 19170.1.0.0). I installed Sleuth's WWE 3.0 ROM.

Well, i am french too, and i have a kaiser too and i can assure you that the cabs inside the thread listed above are indeed working with the rom, Sleuth 3.0, installed on my device.
I think you're in for a hard-reset.

Hi,
I am also looking for the azerty hardward keyboard, thus french, but well the Belgian French Azerty keyboard... Can anyone help me with that ?
I am using Dutty's DualTouch V4 RTM...
Thanks in advance...

It's buried somewhere in the following thread: http://forum.xda-developers.com/showthread.php?t=365066
Check out the posts from the last 4-5 days, it should be in there somewhere but can't locate it directly. The post contains the registry keys that you need to change. Good luck!

Here is what I found on the topic you gave me the link :
- HKCU\keyboard layout\Preload
Default = e001040c
- HKCU\keyboard layout\Preload\1
Default = e001040c
- HKLM\HARDWARE\DEVICEMAP\KEYBD
CurLang = 1036
- HKLM\System\CurrentControlSet\Control\Keyboard Layout
Active = 0000040c
Worked fine for me. Thanks

mhhh I've noticed one problem with this fix, I can no longer use the "fn + space" combination to add accents to differents characters

Axet said:
mhhh I've noticed one problem with this fix, I can no longer use the "fn + space" combination to add accents to differents characters
Click to expand...
Click to collapse
I have the same issue :-(

Changed registery settings as indicated. Now nothing works (not a single button). Even the red and green buttons. Help

perform a hard reset to get back to how it was before.

anyone know how to fix the "fn + space" combination ?

Axet said:
Here is what I found on the topic you gave me the link :
- HKCU\keyboard layout\Preload
Default = e001040c
- HKCU\keyboard layout\Preload\1
Default = e001040c
- HKLM\HARDWARE\DEVICEMAP\KEYBD
CurLang = 1036
- HKLM\System\CurrentControlSet\Control\Keyboard Layout
Active = 0000040c
Worked fine for me. Thanks
Click to expand...
Click to collapse
This one for the Kaiser
- HKLM\HARDWARE\DEVICEMAP\KEYBD
CurLang = 1036
...(Shap's Advanced Config 2.1 XML will permit to do easily the trick)

I have performed all the registery changes listed above this post and now have an AZERTY layout but the "fn+space" combination is now broken.

anyone have an idea ?

Strange Behavior
When i did the changes in the registry mentioned above, all he keys were desactivated. I double checked if i had done anything wrong. I reverted back to the old keys. Now I am still stuck with a qwerty layout on an azerty kyb. The advanced config tool had no effect. I set it to french but nothing changed. I have the Dutty's Hybrid Rom[DualTouch v4].
Thanx a million for your input guys. You are the best.
Greetings from Paris

divine_engineer said:
When i did the changes in the registry mentioned above, all he keys were desactivated. I double checked if i had done anything wrong. I reverted back to the old keys. Now I am still stuck with a qwerty layout on an azerty kyb. The advanced config tool had no effect. I set it to french but nothing changed. I have the Dutty's Hybrid Rom[DualTouch v4].
Thanx a million for your input guys. You are the best.
Greetings from Paris
Click to expand...
Click to collapse
This one for the Kaiser
- HKLM\HARDWARE\DEVICEMAP\KEYBD
CurLang = 1036
+soft reset.
As said, you can customize the Shap's 2.1 XML to permit modifying this options (Shap's standard DON'T do the trick on kaizer!)

Axet said:
I have performed all the registery changes listed above this post and now have an AZERTY layout but the "fn+space" combination is now broken.
Click to expand...
Click to collapse
Anyone ?

Keyboard layout, install additional dlls?

hello,
i know the keyboard layout problem has been discussed a few times already, and i know the solutions, but it seems like i need an additional dll / registry "hack" to get it to work. ive installed the Lite rom v1.4.5. by luca15thebig, it's an english rom with qwerty keyboard layout, but i'd need the german layout. so i've tried the hints given on other threads on wizard forum but they didnt change anything. so ive looked into the [HKEY_LOCAL_MACHINE\System\CurrentControlSet\Contro l\Layouts\] key in the registry, but theres only the layout code for US keyboard layout (*0409) theres only two entries with 0409 at the end but none like *0407. so, is there a cab / registry hack to get it back working? thanks in advance

the_fish said:
hello,
i know the keyboard layout problem has been discussed a few times already, and i know the solutions, but it seems like i need an additional dll / registry "hack" to get it to work. ive installed the Lite rom v1.4.5. by luca15thebig, it's an english rom with qwerty keyboard layout, but i'd need the german layout. so i've tried the hints given on other threads on wizard forum but they didnt change anything. so ive looked into the [HKEY_LOCAL_MACHINE\System\CurrentControlSet\Contro l\Layouts\] key in the registry, but theres only the layout code for US keyboard layout (*0409) theres only two entries with 0409 at the end but none like *0407. so, is there a cab / registry hack to get it back working? thanks in advance
Click to expand...
Click to collapse
just change 0409 to 0407
cheers.

pa3x said:
just change 0409 to 0407
cheers.
Click to expand...
Click to collapse
thats what i did did not work, i guess i'd need the kbdde.dll or whatever it is called (is kbdus.dll in qwerty layout)

alright, i fixed it just installed Schaps Advanced Config and set the keyboard layout right on the misc tab

Still no solution to change hardware keyboard mapping to azerty for WM 6.5?

Aloha!
Looking through a lot of threads for quite some time but cannot find a hack to switch the hardware keyboard mapping from qwerty to azerty.
The WM 6.1 method doens't seem to work for WM6.5...any ideas?
Thanks a whole lot!!

You tried this?:
\HKEY_LOCAL_MACHINE\HARDWARE\DEVICEMAP\KEYB\CurLang
changing this value ?
azerty is french so propably there should be 1036

k0l0r3k said:
You tried this?:
\HKEY_LOCAL_MACHINE\HARDWARE\DEVICEMAP\KEYB\CurLang
changing this value ?
azerty is french so propably there should be 1036
Click to expand...
Click to collapse
Thanks, but that is the WM 6.1 method I think.
There is no such key in my "WM 6.5 by MEDKIT" rom installation.
If I create it and fill in the value still same qwerty mapping.
All help welcome!

you can still use jcespi2005's cabs for wm6.5.....
http://forum.xda-developers.com/showthread.php?t=345426
if you don't have your language, install azerty one:
http://rapidshare.com/files/70647295/XDA_JCEspi2005_French_Input_Kaiser.cab
and change settings to match your language

arnoo said:
you can still use jcespi2005's cabs for wm6.5.....
http://forum.xda-developers.com/showthread.php?t=345426
if you don't have your language, install azerty one:
http://rapidshare.com/files/70647295/XDA_JCEspi2005_French_Input_Kaiser.cab
and change settings to match your language
Click to expand...
Click to collapse
Yepp that works fine on 6.5 roms. I used it to switch Joshs 6.5 rom from qwerty to qwertz.

Weird! I tried both:
XDA_JCEspi2005_French_Input_Kaiser.cab and XDA_JCEspi2005_Dutch_Input_Kaiser.cab but my hardware keyboard mapping didn't change at all.
My ROM is MedKit's WM 6.5 rom...
This same method did work on my previous roms though (WM 6.1 and below).
What 6.5 ROM do you people (who succesfully switched hardware keyboard mapping) use?
Maybe I'm going to try another ROM or so.
Thanks a lot for the replies btw!

I used in on medkits and joshs.
First you have to change the 2 reg keys -> softreset -> install cab -> softreset

Z3rO` said:
I used in on medkits and joshs.
First you have to change the 2 reg keys -> softreset -> install cab -> softreset
Click to expand...
Click to collapse
The 2 reg keys? Wich ones?
I only know of the CurLang change but in the medkit rom I even had to add a Curlang variable if I wanted to change it.
And which of those 2 ROMs do you prefer? Haven't tried the one from Josh yet but maybe I should.
Vielen dank!

HKCU\MUI\CurLang
HKLM\HARDWARE\DEVICEMAP\KEYBD\CurLang
It seems to be important to enter decimal values. NOT hex values.
After changing those two keys, softresetting and installing the cab resulting in another softreset I get my qwertz keyboard layout.
And you should really try Joshs rom. Build 21193 is so muich faster than previous ones

Z3rO` said:
HKCU\MUI\CurLang
HKLM\HARDWARE\DEVICEMAP\KEYBD\CurLang
It seems to be important to enter decimal values. NOT hex values.
After changing those two keys, softresetting and installing the cab resulting in another softreset I get my qwertz keyboard layout.
And you should really try Joshs rom. Build 21193 is so muich faster than previous ones
Click to expand...
Click to collapse
Thanks a lot for the info!
Just tried Joshs 21193 and it is indeed very fast.
But since I noticed there's even an 21198 by Anryl I'm flashing again to check that rom's speed. Once I start installing my crap I won't feel like flashing another rom for a few weeks so better make sure to try to have the best rom now.
21198 also is quite fast so sticking to that one. Changed the to reg values which I could find in this rom as opposed to the medit rom I tried yesterday and changing them did fix my hardware keyboard to azerty.
Thanks again for the info and have a nice day!!