Related
1st off I DID use the search button.... 2nd HELPPP ME!!!
Waaah :'( I have a most intriguing problem I was running pdaviet 4.0.0.6 Touch for almost 2 weeks now without a single glitch.. the phone fell on my carpet and went to bootloader screen and eversince then it has never recovered I tried a hard reset it didn't work when I was pressing the send button it did nothing I did some forum searches and tried putting back the nvid RUU and it said that the update was succesfull and the progress bar on the phone moved accordingly but it went back to the bootloader screen ... then I tried pdaviet temp rom that was in the package still no go I can tell it works somehow because the USB lights up in the bottom left when I plug the usb cable and the progress bar that moves, but I'm getting desperate IPL and SPL info is in my sig...
same same... but i dropped mine before flashing the new PDAVIET touch rom.. still went fine..
now, it still flashes... RUU says its successful.. but PDA just reboots back to bootloader..
i can charge my phone fine in bootloader.. i can see the USB come on when i connect it to my computer.. other than that, can't do anything...
i've tried everything the past 2 days.. looks like i'll have to send it back to dopod.. will let u guys know what happens... probably something got damaged..
struck at bootloader
I tried WM6 (4.0.0.6 touch) from WM5 AKU 2.2 but it failed in between with some write message,which was bit strange as I didn't touch any key on laptop during that time and no program was being run at that time. (I am using VISTA Home premium). I got my phone into bootloader but it does not connect to my laptop...so cant upgrade back to AKU 2.2. In Windows Mobile Device Center, I cant see my device connected. So is it particular to Vista or my phone got bricked?
I am yet to try on Windows XP, which I have to arrange.
Please advise.
i had the sam problem.i installed this : try to install the 2.20 nvid rom
just go into bootloader mode-you dont need active sync connection and start the upgrade-search for 2.20 nvid rom download it and recover your device
charliess said:
i had the sam problem.i installed this : try to install the 2.20 nvid rom
just go into bootloader mode-you dont need active sync connection and start the upgrade-search for 2.20 nvid rom download it and recover your device
Click to expand...
Click to collapse
I tried the same but when I run ROMUpdateUtility_No_VenderID, I get a message 'Update Error, 260' which tells further that PDA is not connected to laptop., although it is very much connected. However LED on PDA does not blink as well.
When I plug in this phone to Wall adaptor, LED does show up.
'USB' appears at Bottom Left corner of PDA when connected to laptop and certainly its getting recognised by Vista as it starts installing Driver as soon as this is connected to laptop.
Please suggest.
I am stuck in the same situation, although I have a G3, running 2.20 on IPL & SPL
Working now
I tried on XP (I was trying on vista before)..I had to install Active Sync as it was not installed on that PC, then run RUU update for AKU 2.2 and update was successfull. Now will try Touch 4.0.0.6 again but this time on XP.
Hope this time I wont have any problems.
Possibly the fastest phone brick in history... I did everything wrong...
AT&T Tilt, Windows Vista host machine
I ran the SSPL, NOT the Hard-SPL...
16% thru it failed
Rebooted, tri color screen, but not the same extact screen I had seen after running the SSPL on my Tilt.
Hard Reset, said yes take me to factory settings, back to same tricolor screen
Plugged it into a XP box, drivers installed, plugged in USB (it shows USB connection on the screen) Activesync of course wont go green
Loaded both the Kraiser rom and the Cingular rom, both fail at 1% and reboot the device and same invalid device ID..
Any ideas, aside from I'm a r-tard?
I ran the Hard-SPL on my HTC and it worked as it should. I'd say give that a shot, THEN try flashing the ROM of your choice.
-Mc
Problem is, when I run hard spl it expects activesync to be running, but in bootloader mode AS doesnt connect so Hardspl wont load =/
- Disable activesync usb connections
- Connect to bootloader with mtty and type the following commands to know your CID and Model ID:
Code:
Cmd>task 32
Cmd>info 2
Cmd>getdevinfo
Paste the output here, and also tell me which SPL version you have on your device.
Also, does the tri-color shows "RUURUN" or similar in the screen?
You should flash a ROM matching your CID to fix it.
Cmd>task 32
No card inserted
Level = FF
Cmd>info 2
HTCSCWS__001Ùü¤HHTCE
Cmd>getdevinfo
GetDevInfo: Get CID OK
HTCSKAIS1*00CS_0HTCE
Cmd>
Device screen says
RUUNBH
KAIS1*0
SPL-1.56.0000
CPLD-8
Flash this ROM, should bring it back to life.
I'm leeching it now, 40% done, also FYI, I've posted on the Official ROM forum new links to most utilities and ROMs hosted on my servers off the rapidshare, to share free of charge.
Ahh, life saver =) Thanks, I'll be sure to add that rom to my list of full Kraiser roms on my web server, now to correctly flash it back with the HTC rom.
Thanks!
Same problem as TS. Bigger problem ... does anyone have the Dutch ROM?
Tnx!
I got the same problem as Palmore. After 16%, stuck, then bricked. I am downloading the ROM pointed by POF (thanks man!!) hopefully will unbrick it. Now, how do we get the HTC Kaiser ROM on this thing? Anyone?
It's on my phone. Tell me how do dump it and I ll send it to you.
Wouter
Lukstra said:
Same problem as TS. Bigger problem ... does anyone have the Dutch ROM?
Tnx!
Click to expand...
Click to collapse
ludovich said:
I got the same problem as Palmore. After 16%, stuck, then bricked. I am downloading the ROM pointed by POF (thanks man!!) hopefully will unbrick it. Now, how do we get the HTC Kaiser ROM on this thing? Anyone?
Click to expand...
Click to collapse
Run the Hard-SPL utility on your PC, and follow the instructions (sticky on this forum)
It will allow you to flash any ROM after that, I've flashed the AT&T Rom, the HTC rom and back and forth, pulling cabs out of the AT&T rom for the items I like (IM utility etc)
Palmore said:
Possibly the fastest phone brick in history... I did everything wrong...
AT&T Tilt, Windows Vista host machine
I ran the SSPL, NOT the Hard-SPL...
16% thru it failed
Rebooted, tri color screen, but not the same extact screen I had seen after running the SSPL on my Tilt.
Hard Reset, said yes take me to factory settings, back to same tricolor screen
Plugged it into a XP box, drivers installed, plugged in USB (it shows USB connection on the screen) Activesync of course wont go green
Loaded both the Kraiser rom and the Cingular rom, both fail at 1% and reboot the device and same invalid device ID..
Any ideas, aside from I'm a r-tard?
Click to expand...
Click to collapse
If you are a r-tard, it must be catching - same situation here at 16% and 1% now......
andydempsey said:
If you are a r-tard, it must be catching - same situation here at 16% and 1% now......
Click to expand...
Click to collapse
LIFE SAFVER
nispen said:
It's on my phone. Tell me how do dump it and I ll send it to you.
Wouter
Click to expand...
Click to collapse
Hi Wouter,
I bought a new Kaiser today (yes now I have two of them ).
I will see if I can dump the Dutch ROM myself and see what happens next.
Thanks for your help anywhy!
- Lucas
Bricked
Ok, so here is my situation. I have a Tilt and Vista.
I ran HardSPL and I am at the tri-color screen. I have:
KAIS1*0
SPL-1.JumpSPL
CPLD-8
USB (in the middle of the screen)
I tried disconnecting and reconnecting it several times. I cant get HardSPL to run again (it hangs at the first section looking for ActiveSync) I tried restarting Vista several times. I can NOT turn off my device, as holding down the power button does not appear to work.
I have tried just running a couple of .exe roms (AKU 0.7.0 ROMS) and I get the connection error [264]. I cant re-establish my ActiveSync connection. In device Manager I have Microsoft USB Sync for the mobile device, but I cant get ActiveSync (Mobility Center) to see it.
I have tried opening MTTY to run "boot" but it says USB Port Can NOT be opened.
I just need some direction here, as it seems like everything hinges on my ActiveSync connection. I have been up and down the Wikis for Hermes and all the similar ones, and I think I am SOL.
I WILL GLADLY DONATE if thats what it takes for someone to help me. Thanks guys, I cant wait for my HTC Rom to work.
Vista Problem.
First off, i had the same problem as you so i just found an XP box to use.
Second, even with XP i still managed to **** up because i did not read the directions all the way through. This device is totally different so make sure you read all the directions.
If you have no access to an XP machine then u can just "obtain" a copy of XP and dual boot just for flashing your device.
If you have no idea what I am saying then read some more. the hermes forums have some great information when it comes to flashing via Vista.
For all you guys that just saved between $300.00-$500.00. How about sending POF like %5 or %10 of what he just saved you...
I'm just sayin'
Later, Lew
Have you installed the XP activesync drivers under Vista? The Hermes Wiki mentions somewhere how to do that.
Jabbs19 said:
Ok, so here is my situation. I have a Tilt and Vista.
I ran HardSPL and I am at the tri-color screen. I have:
KAIS1*0
SPL-1.JumpSPL
CPLD-8
USB (in the middle of the screen)
I tried disconnecting and reconnecting it several times. I cant get HardSPL to run again (it hangs at the first section looking for ActiveSync) I tried restarting Vista several times. I can NOT turn off my device, as holding down the power button does not appear to work.
I have tried just running a couple of .exe roms (AKU 0.7.0 ROMS) and I get the connection error [264]. I cant re-establish my ActiveSync connection. In device Manager I have Microsoft USB Sync for the mobile device, but I cant get ActiveSync (Mobility Center) to see it.
I have tried opening MTTY to run "boot" but it says USB Port Can NOT be opened.
I just need some direction here, as it seems like everything hinges on my ActiveSync connection. I have been up and down the Wikis for Hermes and all the similar ones, and I think I am SOL.
I WILL GLADLY DONATE if thats what it takes for someone to help me. Thanks guys, I cant wait for my HTC Rom to work.
Click to expand...
Click to collapse
Best Forum Ever
I
I got it working. I had to pull the battery out of the phone to get it out of bootloadr, it was just plain stuck. Then, in Vista, I needed to F8, disable driver enforcement, I replaced the wceusbh.inf in device manager, and relaunched HardSPL and there she was! Now for the BigStorage.
Thanks to all that helped, I will be donating pof for sure
Hello guys
last week my Tytn II decide to also get stuck at the bootscreen. It had been running more than a year with one of Dutty's ROMs without any problems at all. Fortunately I knew this forum so I didn't really panic but started reading possible solutions to the problem.
Flashing new OS or SPL via USB didn't work. Nor was I able to connect via mtty to give the boot command. I finally got it back working by flashing KAISDIAG.NBH and after that flashing RUU-356-patch-nostuckinSPL-FORCEUSB as KAISIMG.NBH both via the SD method. After that I have downloaded and flashed the latest standard HTC rom & radio. The device boots and can make calls.
However whenever it is connected to a pc it just freezes. Or at least becomes so slow there's nothing that can be done with it. Activesync connection cannot be established. Note, this does not happen if the device is connected to my car charger or to another USB charger, but only when connected to a PC, XP or vista, doesn't matter.
I've tried flashing different boot loaders, OSes & radios, so far no luck. Currently OS = 3.34.721.2 WWE & Radio i= 1.65.24.36.
Booting & making calls works, connecting via activsync doesn't.
I'd appreciate it if anyone could give me some tips as to what could be the cause of this problem.
Anyone got any ideas as to what I could do?
Hi there, I tired to issue my problem in some other threads, but without any response so far - probably my problem is more specific.
I was using AHEN 6.5-R6i Rom for few weeks when some time after charging my Raphael was not powering up at all. I presume no relation between Ahen rom and the problem (as described further).
I bought new battery and it occurred that probably power charging circuit was damaged, because it newer completed charging, the device was always very hot and discharged in few minutes even when turned off (until completely drained out). What is more the USB connector works only for charging (maybe damaged data connection circuit?).
As a result, before returning the device for guarantee servicing I wanted to downgrade all the roms to the original ones. As advised I started with Radio and OS stocks, but after bootloader update (from SD card, cause my USB doesn't work) I got only "upgrading ROM code error" and the device tries to load some ROM, but putting any on SD card doesn't work anymore.
Any suggestions how to cope with this situation?
If you need help please provide us with important information. So fill your signature first. Mainly if you have hard-spl or if you bought olipro cid unlock and what exactly you have done until now. Also wether your device is CDMA or GSM? If it is GSM than you have to first restore Stock Radio first, after that if you cid-unlocked the phone you have to relock it again. Than remove hard-spl and install stock ROM. But if your USB is broken, i think there is no chance to remove Hard-SPL neither to restore to stock. Remember that when you are in a bootloader and you do not see that the device is connected to activesync or Windows Mobile Device Center it does not mean that it is not connected. Just check you hear the sound indicating that something is connected to usb in vista or windows xp.
If you need help please provide us with important information. So fill your signature first.
=> done
Mainly if you have hard-spl or if you bought olipro cid unlock and what exactly you have done until now.
=> chnged SPL to OliNex, OS to AHEN 6.5-R6i, Radio to version required by AHEN rom
Also wether your device is CDMA or GSM? If it is GSM than you have to first restore Stock Radio first, after that if you cid-unlocked the phone you have to relock it again. Than remove hard-spl and install stock ROM.
=> I retracked the changes as indicated changing both radio and OS to original ones, but had just problem at last step = flashing oryginal SPL (because I made it from SD).
But if your USB is broken, i think there is no chance to remove Hard-SPL neither to restore to stock.
=> Hmm, anyway right now I am stack because bootloader is "loading ..." every time I reboot the device.
Remember that when you are in a bootloader and you do not see that the device is connected to activesync or Windows Mobile Device Center it does not mean that it is not connected. Just check you hear the sound indicating that something is connected to usb in vista or windows xp.
=> I tried to use some terminals to see if I can execute commands directly or see any output, but I haven't even succeeded to open the port. Maybe I am doing something wrong - I give it a try once more tonight.
So what version of SPL is bootloader showing? If it's showing something like 1.90.0000, you are in bootloader and USB circuit is not damaged you should be able to normaly flash ROM from your provider from bootloader. So download the ROM from your T-Mobile it should be some exe. When you see bootloader tricolor screen coonect usb cable from Touch Pro to computer and run the exe soubor with your desired ROM. It should work if everything is OK!
If your device is showing 1.90.OliNex, than i cant help you because i do not know how to remove Hard-SPL from bootloader, maybe it is possible, but for more experienced tech guy, who i am not
PS: Hope you did not bricked your device because Hard-SPL and removing Hard-SPL is all done with cable, you cant do it from SD, and you cant flash original SPL before removing Hard-SPL!
hmm, it seems that I have managed to flash, at least partly, the original SPL from SD card, cause it shows version 1.90.0000. Partly, because it states that the previalus rom update was not successful :-(
In this state (in boot loader mode) I can't even charge battery so I have to do it externaly. Connecting to PC doesn't work (PC USB and cable are fine). The only thing that change after connecting to USB charger is that device gets hot ...
i am sorry to say, that you probably bricked your device... Maybe someone could help with more advanced hardware, software support, but i am not the right person...You can try to put your device to service and hope they will not recognize what have you done, but it depends on your stock SPL version. I got czech T-Mobile and stock SPL was 1.69.0000, so maybe yours was the same...
Next time please read more carefully, search or ask someone if you are not still sure, things about flashing SPLs are very dangerous if they are not done carefully...
Can anyone help this guy? He tried to flash original SPL over Hard-SPL, and therefore it is not looking very well for him to unbrick his Touch Pro...
So ... I got it from the service and they changed the motherboard and the battery, no charges
It was brickes, because of cherging circuit issue.
Unfortunatley I send it back to service, because the loudspeaker is not working ...
Actually I am the same exact boat as the OP. My phone stopped charging and its because the USB port is broken. I need to change the phone back to stock but if its not charging its probably not going to get a connection to the computer either. I read that on at least the Hermes it was possible to flash from the SD card. This is not possible for the TP? Thanks
riotburn said:
Actually I am the same exact boat as the OP. My phone stopped charging and its because the USB port is broken. I need to change the phone back to stock but if its not charging its probably not going to get a connection to the computer either. I read that on at least the Hermes it was possible to flash from the SD card. This is not possible for the TP? Thanks
Click to expand...
Click to collapse
You can flash the ROM, radio, splash screens etc etc from SD card - you will then have to send the phone back with hard spl still installed as you need a usb connection to remove it.
Dont assume you cant get a usb data conenction though - try it and see!
I did try the connection, didn't work. How do you flash from the sdcard? I just dont want to brick it.
Please read this thread on how to flash (including how to flash from SD card).
Again, (assuming you have the correct hard SPL currently flashed) you can flash a ROM, radio & splash screens etc to your phone from the SD card (one at a time) but as previously said you need a USB connection to flash hard spl (dont attempt it from the sd card).
So, my Raphael arrived from service after the second repair (loudspeaker not working) - it seems all works this time
By the way, that is correct that a USB connection is necessary to flash hard spl, but .. I was desperate because the USB was broken, so I tried it from SD. The effect was good enough for the service - the Hard-SPL seemed to be reverted to oryginal one, however the booting was stacked at loading the ROM
i cant believe i did this but i have a sprint tp2 and i accidentally install the wrong rom, i installed 1.8b_Sense_2.5_2012_Full, and after the update the phone wont turn on so i cant even do the bootloader. and hard reset either, nothing is responding. is there any way i can get out of this with a working phone?? would the people at sprint be able to help? and please no smart ass comments im really bummed out about this right now
It should be ok if you only install a gsm rom. If you installed a gsm unlocker than it is bricked. Just push the bootloader buttons with the phone off. If it doesn't go to bootloader it is bricked.
i installed the rom but i think the damn thing CAME with the radio unlocker inside the rom. i cant get into bootloader...
please help
If you can't get into bootloader and it wont turn on it is bricked.
Not to hijack the thread, but on the subject of bricking the phone...
I tried to install Hard SPL using SSPL Manual (downloaded from a link on ppcgeeks.com). I ran it from the phone, and the screen blanked as normal, but no USB device was detected after doing so and the manual Hard SPL would not work either.
I tried to reset and remove the battery. The phone will not turn on, will not enter boot loader mode, nothing! EXCEPT for one thing, when I plug in USB now, it is detected as a Qualcomm CDMA Technologies MSM. No driver though (Win 7 or Win XP).
Is there any way to recover from this?
Hi!
Download and install this:
_ftp://up.ppcgeeks.com/Touch%20Pro%202/Stock%20ROMs/RUU_Rhodium_W_Sprint_WWE_1.21.651.3_RS_1.96WF_NV_SPCS_1.42_0430_PRL60652_Ship.exe
I think it help you.
ted2001 said:
Hi!
Download and install this:
_ftp://up.ppcgeeks.com/Touch%20Pro%202/Stock%20ROMs/RUU_Rhodium_W_Sprint_WWE_1.21.651.3_RS_1.96WF_NV_SPCS_1.42_0430_PRL60652_Ship.exe
I think it help you.
Click to expand...
Click to collapse
Hi, I have the exact same issue as the member above. I tryed to go to the ftp site you reccomended, but can't download. Can you please help! I cant sleep or think of anything else. Can't believe I did that to my phone.
go here and then to touch pro 2 stock roms. ftp://up.ppcgeeks.com/
Thanks for the replies.
I can't load the stock ROM since the phone is not recognized by ActiveSync. While you can see it when you connect USB, it isn't actually usuable as there is no driver loaded for it. And many drivers I've tried for it do not work either.
I did try [to install the ROM] though just to make sure there was no magic going on behind the scenes, but no go.
EDIT: Grammer fix