Identification of Prophet phone - JAMin, XDA Neo, S200 Software Upgrading

Hi All I would like to update my phone but I am uncertain what version it is?
I have a IPL of 1.00
And a SPL of 2.13
There is a reference to G3/4 but I don’t see how it applies?
Any help would be appreciated
Never mind found it

Related

What exactly is IPL and SPL

Searching the forum for these words gives too many replies. So I would appreciate it if someone would explain what IPL and SPL exactly are. On my Prophet IPL = 2.10.001 and SPL = 2.15.001. Should they not be the same, and if yes, how can I upgrade IPL only (whatever it is).
Who will shed some light on this?
IPL = Initial Program Loader, this is the bootloader
SPL = System Programming Language (I Think), Not sure exactly what this does. Its has something to do with the Chip, in the Prophets case.
G3 chip ends in .000 or G4 ends in .001.
I have IPL 1.0 but my SPL is 2.15.000 (i.e I have a G3 chip)
I also know higher SPL's are a pain to unlock, you have to try and downgrade
Hope this helps, it's only what I can gather.
Regards
Austin
how does one downgrade or upgrade?
Guess, that SPL is something like hardware abstraction layer software, platform &chip dependent.
austin.tovey said:
IPL = Initial Program Loader, this is the bootloader
SPL = System Programming Language (I Think), Not sure exactly what this does. Its has something to do with the Chip, in the Prophets case.
G3 chip ends in .001 or G4 ends in .001.
I have IPL 1.0 but my SPL is 2.15.000 (i.e I have a G3 chip)
I also know higher SPL's are a pain to unlock, you have to try and downgrade
Hope this helps, it's only what I can gather.
Regards
Austin
Click to expand...
Click to collapse
Austin, you are right, just one thing. The Chip G3 ends in 000 and the G4, ends in 001.
What's the risk of flashing a Prophet G4 with a G3 ROM, or a Prophet G3 with a G4 ROM?
Phoenix2000 said:
What's the risk of flashing a Prophet G4 with a G3 ROM, or a Prophet G3 with a G4 ROM?
Click to expand...
Click to collapse
Your service centre may be kind enough to repair the phone under warranty if you manage to do this mistake. The phone will not start again if you flash it with the wrong IPL/SPL and without specialised equipment a main board replacement is the only solution to this.
(I did this myself and it took the service centre three weeks to fix it. I guess they struggled with their JTAG cables and then gave up and just replaced the board instead.)
The most of service centers does nothing but changing boards, display and other parts, and do some software loads via USB. Most of the services has no even JTAG equipment nor documentation on how to load the flash via JTAG.
What could be the differences between IPL/SPL versions?
Like I have IPL ánd SPL: 2.10.0001
While most people here on the board seem to have 2.15.0001
Also saw some ROM upgrades (the pdamobiz one for instance) which says it's for 2.15.0001. Although on their english forum it says 2.xx.0001, but not in the file
And while I'm at it (another sneak question ), I guess the pdamobiz rom (aku 2.3) upgrades the device to os: 2.15.13.27 right?
IPL = Initial Program Loader
SPL = Second Program Loader (System Programing Language does not make any sense)
IPL Trigger SPL and then SPL activate the OS
They do the Hardware check-around and hang up if something wrong happens.
check pic
check picture with DOC boot sequence
can someone help me to find IPL 2.15 for G3 prophet
I flashed my Dopod 818 Pro with lvsw's AKU2.3 & AKU2.3.1 and my SPL was changed to 2.20.0001 while IPL was kept 2.15.0001. I wanted to install the official Dopod AKU2.0 ROM back but it failed. I used ROMUpdateUtility.exe and it failed since initialization. If I used ROMUpdateUtility_No_VID.exe it failed at 95% which I believe the official .nbf file has some conflicts with SPL.
And I can't downgrade SPL back to 2.15.0001.
I saw some thread saying that there's no mean to downgrade G4 chip.
Does it mean I have to use AKU2.3 from now on?
Nut110 said:
I saw some thread saying that there's no mean to downgrade G4 chip.
Does it mean I have to use AKU2.3 from now on?
Click to expand...
Click to collapse
No. Search this forum. There is a procedure for updating a G4 phone without touching the IPL/SPL areas. Be careful though! A mistake when attempting to upgrade your PDA may result in it being downgraded to a paper weight!
I have A Wing and I Dont see the IPL/SPL when I start it up, I downloaded the wizard service tool but It doesnt seem to work( "Warning!
A device was detected but one (or both) of RAPICommunications and Applications Policy isn'tenabled. Use first button for that purpose and try again") Ive Hard reseted it and enabled RAPI + unsigned APPS but it still wont work so Is there some other way to Get the IPL/SPL? Thanks.
never Mind I didnt enable the cab file within My wing Thnxs XDA Community ^_^
I was wondering how do I find out what IPL or SPL I have on my wing??

IPL 1.000 ????? Any problem to upgrade to AKU3.3????

i find that the number of IPL shown in bootloader is 1.000....
IPL 1.000
SPL 2.15.000
GSM 02.19.21
OS 2.15.23.27
is there any problem to upgrade to AKU3.3.?....
i did a little search in this forum...and IPL for the others are always 2.xx.00x...
i know that i have a G3 modal....and i 've unlock the CID...(but i wonder if i did it successfully...)...
push~...help me
I've experienced it but no solution unfortunately...​
There should be no problem, just make sure you update to a 2.20 ROM first before you start upgrading to an AKU3.x or WM6 ROM
My IPL after unlocking and upgrading to WM6 remains 1 but SPL is 2..how to make both of them 2?​
I posted IPL 2.10 for G3 search for it
nope...no problem at all...
mine had a plan upgrade IPL/SPL to 3.08
haven't tried it...
but mine already aku 3.3
it works fine..as he said,don't forget upgrade to aku 2.2 as "starters"
what's the purpose and benifit to ungrader over IPL 1.0?
exe read what do IPL and SPL mean in the WIKI, it is like the BIOS of the mainboard in PC, basic inpot output system
I did as you suggested and found nothing regarding IPL SLP in the wiki. Lots of link on there does not display anything when clicked.

help upgrading the radio

i have a qtek s200
wanting to upgrade to the radio Prophet_G3_G4_RadioRom_v2.69.21.exe
when i run the file it shows the
from image version :1.2.0.0
to image version:
its blank...
any ideas?
also do i need to upgrade the IPL/SPL, if so please advise
lindows said:
i have a S200 G3 phone
my IPL 1.07 and SPL is 2.20.0000
does know what the official IPL is and the SPL is?
Click to expand...
Click to collapse
dear
it is normal to see to image version balnk, we put any number we want when make the nbf file
about the IPL SPL you have the last SPL don't play with it and don't update to useless 3.08 ok
the IPL i have put the IPL 2.10 some where her in the forum search for it
i see people with IPL 2.20, or 2.15 the one on the site is 2.10, where can i get a 2.20?
I did see 2.20 and 2.15 it is only for G4 and shipped, there is no IPL nb in all ROMS
try 2.10 or 2.09 I did post some where here it is for G3 only
and please don't send pvt msg for this
here is IPL 2.20 for G3 only
use at own risk I'm not responsable of any damage will happend to your phone
Do not blame me if you brick your phone ok
please don't use it unless you are aware that it is your choice
I forgot to put the file
i do have a G3 prophet, but is this official?
thanks for the IPL 2.20, works like a charm
where could i get the latest IPL for my G4?
Thanks!
here is IPL 2.09 2.10 2.20 for G4 only
use at own risk I'm not responsable of any damage will happend to your phone
Do not blame me if you brick your phone ok
please don't use it unless you are aware that it is your choice
please put the wanted IPL (((nk.nbf))) in the upper folder and update
is there anything i need to know befor flashing?
i have an error when i upgrade to IPL 2.20
what error?
iassael said:
what error?
Click to expand...
Click to collapse
Invalid Vendor ID
what do you mean before upgrading?
Is your device ok?
I try with ROMUpdateUtility_NoID.exe and it's ok upgrade successful
i did the same and its ok
have you noticed any differences?
not for the moment but I find it faster
really?
If you notice anything please inform us because i see no difference

Radio, IPL & SPl Versions

It has been some time since I have been here and was wondering.
For someone who lives in California. AT&T
OS 1933
using TNT Build 18533.0.7.0
What is the best
Radio Version
IPL Version
SPI Version
to use. With the lease amount of errors.
And should I upgrade to the new TNT version? What is the benefits?
Thank you.
Firstly, taht is IPL and SPL, don't get it wrong.
IPL and SPL is currently at 3.08, which should be best for WM6 and WM6.1 OS ROMs.
For Radio, just use the one that get best reception as soon as it is 2.xx.
IPL & SPLfor Wizard G4
Could you please help to get latest IPL /SPL for G4 device
there is no ipl spl for g4 as far as i have seen of course i haven't been in wiz section much but dont flash any ipl spl my opinion possible bricking
ph03n1x said:
there is no ipl spl for g4 as far as i have seen of course i haven't been in wiz section much but dont flash any ipl spl my opinion possible bricking
Click to expand...
Click to collapse
i second that .. no ipl/spl for g4 device except for olip version from hard spl ..
the radio is a network dependent selection .. choose from the ones in the ftp
i used almost all of them and the only one that worked perfect for me was the 2.19 .. find it in my signature
also i advice to use tnt rom .. also found in my signature .. it's great !
finally .. please dont brick ur device with ipl/spl installation ... it will brick it!

IPL and SPL problem

HI,
I have a Question,I've use Hard-spl 3.10 by cmonex flash done and while entering bootloader I have IPL 2.20.002 while SPL is 3.10.cmonex. Is that normal? Can i flash cooked rom without the risk of bricking the phone? And if IPL should be the same with SPL,can someone teach me how to update IPL please, I've read that you have to enter bootloader and using RUU to update but nothing happen. Please advise and thanks in advance. Devices is in chinese OS by the way hoping to convert it to WWE.
did you read the wiki about flashing and the thread from were the spl apps comefrom. considering you are "hoping" to convert from chinese os to wwe i dont think you are 100% what youre doing
Thanks a lot for the reply. I manage to change it after reading more.Sorry I thought that if you change the SPL IPL changes too.Thanks again.SOrry Just new to this kind of gadget.1st time Winmobile user.
thanks for taking notice of the reply, we mainly get user who cant be botheres to read. and if you ask them to they complain
but you made my day thanks man

Categories

Resources