Hello there you xda geniuses! I need a little help... I have an ATT Tilt running Dutty's WM6.1 WWE radio 1.65.14.06 protocol 25.81.40.02w. I bought this phone with this ROM, so I don't know what all was done to it, but the problem I am having is that from time to time, the phone and data switch off to 'no service' and i cannot get a phone signal to register, unless i soft reset it. I have read of this on several lists but cant seem to find the definitive answer - do i need to flash the ROM again, or with something other than the version it uses in order to get this resolved? I am missing calls and messages when it is down. Please save me!!
Hard reset the device first.. ..this is what I do with all my new purchases
Reflash the radio if you do not wish to hard reset. This will keep your data unlike a hard reset.
If this does not work reflash the device with a new ROM.
There are plenty around here. Check the WiKi if you want to know more about those ROM's.
When you say reflash the radio, can you elaborate? I dont know what file i'm looking for. You have already been a big help, thank you!
Why don't you post this in the appropriate thread and maybe you will get more answers????
If I knew what thread that was, I would have posted it there. Perhaps you could tell me where it should go before I drive over this phone with my car tire.
When you flash your radio it means that you only flash that part of your device that's responsible for the radio\data\gps etc.
If you check the HTC Kaiser in the WiKi you will find multiple links to radios that are available.
Related
hey Guyz. I have a Tilt that a customer gave me that got bricked while trying to flash one of dutty's roms...Problem is that the genius didn't load up Hard SPL even tho he told me that he did...now He wants me to fix it...even tho he didn't follow my instructions and read the WiKi...I kno that on the Hermes it was able to be unbricked. Is the same for the Kaiser possible? I would greatly appreciate your help as my customers are loving the work you guyz do here in nyc..
Thanks in Advance!
Cristian
What is the current status of the phone?
Can you get into the bootloader at all?
If you can get to the bootloader you should be able to load the AT&T AKU v0.4.4 ROM (the unoffical upgraded AT&T ROM). Once you get that loaded you should flash HardSPL immediately.
Let me know how it goes...
Cheers.
I bricked my tilt when it was less than 24 hours old... I recovered it with a BETA of the ATT rom and THEN redoing the hardspl thingy - worked a treat.
Do a search for tolt bricked and you should find afew threads for it.
The rom is called something like RUU_Kaiser_ATT_WWE....._Internal.exe
It goes to the Tri-Color Screen but stays there..I'll go ahead and research it so I can find the original AT&T and load it up...It shows a lot..workin for at&t and being a member on xda...U guyz have no idea how ya make life easier for my tilt customers b/c at&t truly dropped the ball on the rom...and by offering alternatives..u make the user experience so much better...thanks!
HTCFAN0923 said:
It goes to the Tri-Color Screen but stays there..I'll go ahead and research it so I can find the original AT&T and load it up...It shows a lot..workin for at&t and being a member on xda...U guyz have no idea how ya make life easier for my tilt customers b/c at&t truly dropped the ball on the rom...and by offering alternatives..u make the user experience so much better...thanks!
Click to expand...
Click to collapse
If you are at the bootloader screen (Tri-Color) then the phone is not bricked. In the sticky at the top on how to revert back for warranty replacement, it has links for the various roms. Just flash an official AT&T rom on it and you should be good to go. Then do the HardSPL.
Cool that you work for AT&T and hang out here! If you have any other warranty returns, I can give you my address as I wouldn't mind having a backup or two...
BTW: The AT&T ROM for the Tilt is actually quite good in the big picture of things. At least the phone is usable (slower than it should be and less memory than it should have, but its still very usable and stable on the official rom). If you want to ***** about official roms, go back to the 8125 and its official rom. The while the device (at the time) was great, that rom made the phone almost worthless (super slow, battery problems, bad radio, dropped calls, freezing, etc). I can't tell you how many people that run custom roms on the Wizard just can't believe what that phone is actually capable of.
Ok, sorry, got off topic there...
does Hard-SPL needs to be flashed just once on a device or does it need to be installed every tome a new ROM is going to be Flashed onto it?
mfrazzz said:
If you are at the bootloader screen (Tri-Color) then the phone is not bricked. In the sticky at the top on how to revert back for warranty replacement, it has links for the various roms. Just flash an official AT&T rom on it and you should be good to go. Then do the HardSPL.
Cool that you work for AT&T and hang out here! If you have any other warranty returns, I can give you my address as I wouldn't mind having a backup or two...
Click to expand...
Click to collapse
For some reason, it's not being recognized by my Activesync. I got it to recognize it but now it sayz Error 294: Invalid Vendor ID...I'm using the RUU_Cingular_WWE Rom for the Kaiser...so I'm flabbergasted at this point...
Quick Silver said:
does Hard-SPL needs to be flashed just once on a device or does it need to be installed every tome a new ROM is going to be Flashed onto it?
Click to expand...
Click to collapse
Only once! Than you can flash as much as you like!
HTCFAN0923 said:
For some reason, it's not being recognized by my Activesync. I got it to recognize it but now it sayz Error 294: Invalid Vendor ID...I'm using the RUU_Cingular_WWE Rom for the Kaiser...so I'm flabbergasted at this point...
Click to expand...
Click to collapse
ActiveSync will not recognize your device when in BootLoader mode!
The Vendor ID error means the ROM cannot be loaded on the Tilt without HardSPL. You need an original Tilt ROM. (That's what I think about this)
HTCFAN0923 said:
It goes to the Tri-Color Screen but stays there..I'll go ahead and research it so I can find the original AT&T and load it up...It shows a lot..workin for at&t and being a member on xda...U guyz have no idea how ya make life easier for my tilt customers b/c at&t truly dropped the ball on the rom...and by offering alternatives..u make the user experience so much better...thanks!
Click to expand...
Click to collapse
Oddly enough the "Original" Tilt ROM will not install on a Tilt that does not already have HardSPL on it (to spell it out for you, the CID of the ROM does not match the Tilt's stock SPL). If you check the "reverting back" sticky you'll find all this info already, though it is deep in the thread.
The AKU v.0.4.4 ATT Beta ROM does have the correct CID and will flash on a stock Tilt. SO that is what you are forced to resort to at this point. Once you get the beta ROM installed you can (and probably should) install HardSPL.
After all that, if you decide you want to return or warranty the phone follow the "revert" thread to restore it to "stock" form.
Some additional notes on your problem...
ActiveSync will not connect in Bootloader mode (this is expected). You should see a device show up in Device Manager however, I can't recall the exact description however.
quick flash procedure:
put phone in bootloader
connect usb cable
install ROM
FYI, the problem may not be a bricked tilt... you could try Pof's fix which involves using MTTY.exe to boot the phone, depending on how your "customer" tried to flash it it may just need a kick in the pants to restore it. (search Pof's SSPL for the Kaiser thread for instructions, the thread was closed so you will have to look deep).
<climbing on my soapbox>
Lastly... your use of the word "customer" concerns me... are you charging people for the work you do to their phones? If so, do you donate to the people who make it possible? I'm probably just misunderstanding you, but if you're profiting from others work, perhaps you should contribute (especially if you're coming here to ask for help).
</climbing down>
Good Luck!
Cheers.
Customers as in I work for an AT&T corporate owned Retail location and they have bought Tilts from me. They kno my Tilt has been modded and they usually want to do the same. I don't charge them for doing mods to their Tilts. This still remains a community where we help each other and I cherish that. Greed has no place here.
as far as ur suggestions...It looks like I'm gonna be drunk @ 4am on XDA tonite...lol...
HTCFAN0923 said:
Customers as in I work for an AT&T corporate owned Retail location and they have bought Tilts from me. They kno my Tilt has been modded and they usually want to do the same. I don't charge them for doing mods to their Tilts. This still remains a community where we help each other and I cherish that. Greed has no place here.
Click to expand...
Click to collapse
That's cool... my misunderstanding then. Hopefully no hard feelings .
All in all it sounds like the guy wants a custom ROM so you should probably get the ATT Beta ROM and install that. And then install HardSPL.
Check Kyphur's second post in the thread below for the ROM you want.
http://forum.xda-developers.com/showthread.php?t=343198
Thanks for the info sycho...I'll get to it after work..
Good news! The AKU 0.33 worked! Thanks for ur help sycho!
how can i re-install the window? at tilt 8925
i have wm6.1
i want to reset it so the error message shud gone like Recover ?
@kaal,
It seems what you want to do is a HARD RESET. Please visit Kaiser Wiki and read through. You'll know your phone better that way.
@HTCFan & Sirsycho, Glad you both sort it out in the community spirit Cheers!
sirsycho said:
Oddly enough the "Original" Tilt ROM will not install on a Tilt that does not already have HardSPL on it (to spell it out for you, the CID of the ROM does not match the Tilt's stock SPL). If you check the "reverting back" sticky you'll find all this info already, though it is deep in the thread.
The AKU v.0.4.4 ATT Beta ROM does have the correct CID and will flash on a stock Tilt. SO that is what you are forced to resort to at this point. Once you get the beta ROM installed you can (and probably should) install HardSPL.
After all that, if you decide you want to return or warranty the phone follow the "revert" thread to restore it to "stock" form.
Some additional notes on your problem...
ActiveSync will not connect in Bootloader mode (this is expected). You should see a device show up in Device Manager however, I can't recall the exact description however.
quick flash procedure:
put phone in bootloader
connect usb cable
install ROM
FYI, the problem may not be a bricked tilt... you could try Pof's fix which involves using MTTY.exe to boot the phone, depending on how your "customer" tried to flash it it may just need a kick in the pants to restore it. (search Pof's SSPL for the Kaiser thread for instructions, the thread was closed so you will have to look deep).
<climbing on my soapbox>
Lastly... your use of the word "customer" concerns me... are you charging people for the work you do to their phones? If so, do you donate to the people who make it possible? I'm probably just misunderstanding you, but if you're profiting from others work, perhaps you should contribute (especially if you're coming here to ask for help).
</climbing down>
Good Luck!
Cheers.
Click to expand...
Click to collapse
Because of you folks and this thread, I have a working device as opposed to a paperweight...Thanks!!!
Sorry guys & gals. New to this but cannot get a handle on the right thing to do. Can anybody help? Yes have read the basics but its not basic to me I am afraid.
I have got an HTC TYTNII from Orange. Need to unlock the sim card lock. Then would like to clear out all the Orange rubbish with a rom flash I think its called (havent got all the words right just yet). However as I paid a few quid forthe phone do not really wish to stew it!! If you know what I mean Harry! Cannot find hardspl etc on so on have ativesync fitted and running. All help greatly appreciated.
This webpage has a ton of files that have been extremely helpful to me so far...
http://duttythroy.lives-in.eu/
dont really know how to help
but
if you want to use hardspl is on the sticky thread
activesync can be downloaded from ms depending on the os you are using.
if you want more help tell me what you need and i will guide you
satiros
Lots of reading
I suggest you do lots more reading.
However, as a starter, go to :
http://www.imei-check.co.uk/kaiser-unlock.php
Pay for the unlocking service.
Then, and only then, install HardSPL
Following that, you can install any ROM you like (for Kaiser / TYTN II)
If you install a ROM based on Windows Mobile 6.1, chances are you will have to install a new Radio coding too. You should install the one for UK Vodaphone on :
http://wiki.xda-developers.com/index.php?pagename=Kaiser_Radio
Don't worry, it works on Orange, I have it on mine.
I recommend the Alex ROM even though it is still a Beta version, it is very good.
After you install the ROM and done a hard reset (keep both soft buttons pressed down whilst pressing the reset button with your stylus) install the radio, then do another hard reset.
Bingo, it's like a different phone.
Thanks for the info have carried out the first bit awaiting reply. Where can I download HardSPL please? Having looked at your recommended ROMs Which one?.. wow some cooking I can see I will be Flashing all day!!
cloudbasher said:
... Where can I download HardSPL please?
Click to expand...
Click to collapse
if you cannot look & find it right there in one of the sticky threads of this forum ... I'd suggest you do not attempt any flashing to your device !!!
as some of those stickies contained mandatory informations that you need to READ THOROUGHLY !!!
Hi guys! Im from Norway, im therefore having the Europe version of the TP.
My ROM version is: 1.90.409.6 NOR
My Radio version is: 1.02.25.19
My problem is that the phone is rather slow and unstable.. Since i got it 2 months ago i had to factory reset it four times! And therefore having to install all my apps and stuff over and over again. Starting to get a little frustrating The last fault i got on the device was that it wouldn recieve sms. I had to turn off the phone, and then back on to get them. And had to do so every ten minutes to be sure that i got the messenges i was suppose to.. Kind of boring. So! Im wondering. What would you guys suggest? Would a radio update change the speed of my device?
Sorry if i double posted. I couldt find any posts with norwegian people woundering about the same
Thx in advance!
I doubt, that a different radio will improve you situation but you can easily try it without any risk. Flashing a different radio does not hard reset your device. So you can try it and go back if it doesn't show any effect.
I would suggest you to have a look at ROMeOS v1.40. That ROM is extremely fast (compared to stock ROM at least) and perfectly stable.
HTH
Okey. Thanks for the response. I read somewhere that a radio flash did make the device faster. Im not sure if my version is old or not but. Do you perhaps have a link to a radio flash guide? The only simmilar i found only said how to change ROM.
Cheers!
Okey. Thanks for the response. I read somewhere that a radio flash did make the device faster. Im not sure if my version is old or not but. Do you perhaps have a link to a radio flash guide? The only simmilar i found only said how to change ROM.
Cheers!
I found the radio flash guide. But when i tried to install HardSPL it halted saying that my TP wasnt connected to my PC. Wich it was.. So thats kinda weird.
But lets say i want to try a new ROM. My TP is set up with Norwegian keys. And the software keys on my TP also have the norwegian letters if i use the fn key. Will this dissapear? Ive never done this before. Sorry if my questions are strange =)
Anyone? =)
I swear I have used the Search tool, but lots of topics have HSPL in their title, and I weren't able to find any FAQ topic talking about that.
Everybody here talks about SSPL, HSPL, how to use them and so on. The only think I understood is that to flash custom roms you need HSPL, and for official roms SSPL is "enough". Could anybody tell me something more and explain me why do we need this stuff to flash a rom and not just run a .exe on the device which could do everything automatically?
I also didn't understand what the Radio is. I thought a part of the rom which manages the GSM/3G antenna, but I think I am wrong.
Thank you in advance
Black Antitoon said:
I swear I have used the Search tool, but lots of topics have HSPL in their title, and I weren't able to find any FAQ topic talking about that.
Everybody here talks about SSPL, HSPL, how to use them and so on. The only think I understood is that to flash custom roms you need HSPL, and for official roms SSPL is "enough". Could anybody tell me something more and explain me why do we need this stuff to flash a rom and not just run a .exe on the device which could do everything automatically?
I also didn't understand what the Radio is. I thought a part of the rom which manages the GSM/3G antenna, but I think I am wrong.
Thank you in advance
Click to expand...
Click to collapse
okay
spl = Secondary Program Loader. Think of this in the same sense as bios on a pc. (it sets where your system boots from, intialises sub system process etc)
sspl = soft spl (this allows you to flash another spl or hardspl).
hardspl = hard spl .. basically it allows flashing of any rom. It protects you from bricking your device. If you have a bad flash it just forces the phone to load into bootloader, from where you can flash another rom using pc or storage card to get your phone working again. Using a hardspl you can flash any carrier rom without cid unlocking your device first.
Radio = you are correct about your assumption as to what a radio does .
Now if you are flashing your carriers official rom than you don't need any of this stuff but different carriers set their cid in their roms so only phones that have their cid can flash those roms ... now if you like the wwe htc rom and want to flash it onto the tilt you will first need to hardspl your device or otherwise you won't be able to flash the rom ... it will time out with an error telling you invalid vendor id.
Many thanks! Now it is much clearer! Just one more question: why do people care so much for the radio and post their radio version to their signature? Is the radio revision so important? Why is it not just part of the rom?
Thanks again!
Black Antitoon said:
Many thanks! Now it is much clearer! Just one more question: why do people care so much for the radio and post their radio version to their signature? Is the radio revision so important? Why is it not just part of the rom?
Thanks again!
Click to expand...
Click to collapse
well radio is definitely important ... i mean if you have a uncompatible radio you will loose sound, camera, connection etc on your phone. Reason people list the radio they are using is basically to let others know what radio is working for them on the rom they have. This way if someone else doesn't know which radio to use with the rom than can use the radio they have listed. Radios are location dependant. Some radios give better reception here in states while others give better reception somewhere else in the world.
Most of the time chefs will include a radio with their rom, but some leave it out so you can choose the one that works best for you. Just a keynote to keep in mind when selecting radios is that wm6.1 roms need wm6.1 radios and wm6 roms need wm6 radios. Also DO NOT flash a radio that is intended for another device i.e a rapheal radio onto a kaiser (this will brick your device). There are exceptions to this rule. Also you should get your phone security unlocked before proceeding with flashing various kinds of radios. This will save you from getting stuck with a radio that locks itself to the device (thus rendering itself unchangeable; no matter how many times you flash another radio you will be stuck with that radio) an example of this is "the radio from hell" which alot of people in the kaiser forum got stuck with and weren't able to get rid of it until "FrankenKaiser" came along.
Hope this helps.
Thank you, it does.
Another term I read is Jump SPL. What's that?
Some poeple encounter problems trying to flash hardspl, Jump spl "jump starts" the process.
(problems like the kaiser white screen issue here)
Ok, thank you all.
Now I only have to wait for the Blackstone Hard SPL.
Black Antitoon said:
Ok, thank you all.
Now I only have to wait for the Blackstone Hard SPL.
Click to expand...
Click to collapse
aren't we all ... hold tight though they are close to getting it done.
How do you know that? In the placeholder topic there has been no update about the development status since a while.
WOW!!
Just wanted to say a HUGE thank you to thesire and joel2009 for being so extremely nice to a newbie!!! This is probably one of the first posts I have seen where a newbie doesn't get their head bitten off for asking a question. (I don't think I've ever asked a question for that very reason! LOL)
I was searching for the answer to 'what is SSPL' because I couldn't find it in the Wiki acronyms section. What a pleasant surprise! Sorry if this steers away from the topic but I just could NOT pass over this thread without saying THANKS!!!!!!!!
You wont get flamed for asking Questions in this Forum
as for the Acronyms, try here
http://forum.xda-developers.com/forumdisplay.php?f=265
more here : http://wiki.xda-developers.com/index.php?pagename=FAQ#techicalJargon
my friends, you need to master the art of searching
So I actually risked to find my skin burnt by the flame?
I didn't even know that there was a wiki/knowledge base here. Well, I actually felt somthing like that, but I completely forgot about that when searching. I searched carefully indeed, but only in the forum, and since lots of topics contain the words SPL, HSPL and so on, I was unable to find relevant results.
I'll look there next time, thank you all again.
missbizzylizzy said:
Just wanted to say a HUGE thank you to thesire and joel2009 for being so extremely nice to a newbie!!! This is probably one of the first posts I have seen where a newbie doesn't get their head bitten off for asking a question. (I don't think I've ever asked a question for that very reason! LOL)
I was searching for the answer to 'what is SSPL' because I couldn't find it in the Wiki acronyms section. What a pleasant surprise! Sorry if this steers away from the topic but I just could NOT pass over this thread without saying THANKS!!!!!!!!
Click to expand...
Click to collapse
hahaha.... why do you think i finally posted my first post after joining for 2 years. I just didn't want to tick someone off
Now i finally understood the term "SSPL & HSPL"!
how to find original SPL FOR HD2
Does anyone know where to fin dthe original 2.10 spl for hd2 so i can return it ?
Hi everyone,
So I updated the stock SPL back to my phone while having a CDMA rom on my device. Looks not like a problem at all, but appearantly it is when your phone is not a CDMA rom After that the phone won't boot anymore.
Since then I am not able to update my device to ANY rom, not even the stock rom. The updater keeps giving me the famous 262 error and hangs at 0% of the update. XDA-user orfeo_b has messaged me a while ago that he had a task29 program for windows 7 to format my phone. But he didn't respond to my message. So my question is: is there anybody who has this program for my phone? and if not, is there any other possibility to empty/format my phone?
Why did you create two threads in the same forum? (THREAD LINK)
You not want to post HERE, did you even bother to do any searching in HERE
You do know the FUZE is GSM, correct?
R^7Z said:
Why did you create two threads in the same forum? (THREAD LINK)
You not want to post HERE, did you even bother to do any searching in HERE
You do know the FUZE is GSM, correct?
Click to expand...
Click to collapse
sorry, a second after saving I realised that my topic was a question so I posted the topic again accidentally.. I searched the whole forum for weeks but didn't find any solution. As I said, I accidentally flashed a CDMA rom to my GSM phone.
User benjamminzIS started the thread HERE
Perhaps give that a once or twice over and see if it works for you. Be sure to leave some feed back if it does!
Additionally, I must confess that I skimmed your post because you posted twice and didn't think anything of it after the fact. So I apologize if I came off slightly rude. Was not my intent!
There's a pretty good chance your phone is dead now. Flashing the stock spl after bricking your phone with a cdma rom is probably the worst thing you could have done. What were you thinking? With the stock spl, you can't flash task 29, or anything, for that matter. I guess you can try flashing hard spl, but you have to keep in mind that this 'stock spl' is not in fact the real stock spl (it's a patched stock spl that is capable of over-writing the hard spl). I'm not sure if it can be over-written with hard spl; I guess you'll find out. If you had read any of the posts on reverting to stock for warranty purposes, you would have seen that the absolute last step is flashing the 'stock spl', because once you do that, the device is locked.
Now, if you also flashed a cdma 'stock spl', then you can definitely throw the phone away.